Latest spindle valve Tenders | Government spindle valve Tenders

Central Government / Public Sector

CTN :45066211

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - 03132604005 1)98110123 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 4 wheeler bvzc wagons, available on rails. 1) ser bvzc 85079560037,2) ecr bvzc 85100429647 , 3) special repair bvzc 85060294668 , 4) special repair bvzc 85070160038 , 5) er bvzc 85029671424 . location road no.3 . at dump yard. rc items: 1.coupler bodies (nt), 2.knuckles,3.yokes, 4.draft gears, 5. striker castings (nt), 6.r.b wheel sets with axle boxs, 7.yoke pin support (1st plate), 8.yoke support plate(3rdplate),9. breake cylinder 300, 10. cut of angle cock ,11. cppb with control reservoir.12 .auxilary reservoir 75. 13. distributor valve ,14. yoke pin .15 draft gear follower.16.knuckle pin.17.knuckle thrower ds8no:0999603005. dt:.24.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 49.328 .mt sold by number basis only.05nos , delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :45066212

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132604001 .pl no.98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 8 wheeler wagons, bcn m1 , boxn m1 , bobrn m1, boxnr . available on rails. 1) er bcn m1 30029161826. 2) special repair bcn m1 30069062244. 3) ser bcn m1 30079060452 . 4) special repair boxn m1 10069660992 . 5) er bobrn m1 72029660268 . 6) nr boxnr 25039660179 location road no.3 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.distributor valve 11.cp pb with control revioser 12.sab, 13.boxn doors,14.bcn swing,15. bcn flap 16.yoke pin support (1st plate),17. safety plate with anchor plate(2ndplate18.yoke support plate(3rdplate),19.cock of angle cock.20.yoke pin,21)draft gear followers,22.knuckle pin.23.knuckle thrower.24.bronze buishes ds8no:0999603001. dt:.24.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 72.926 .mt (m.s -68.740, ss-4.186) sold by number basis only.06 nos. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 06 nos.

Central Government / Public Sector

CTN :45066213

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132604003 pl no 98110123 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 4 wheeler bvzc wagons, available on rails. 1) ner bvzc 85040700080 ,2) cr bvzc 85019660605 , 3) scr bvzc 85090160131, 4) special repair bvzc 85069760171 , 5) nfr bvzc 85050300898. location road no.3 . at dump yard. rc items: 1.coupler bodies (nt), 2.knuckles,3.yokes, 4.draft gears, 5. striker castings (nt), 6.r.b wheel sets with axle boxs, 7.yoke pinsupport (1st plate), 8.yoke support plate(3rdplate),9. breake cylinder 300 . 10. cut of angle cock .11. cppb with control reservoir.12 .auxilary reservoir 75. 13. distributor valve ,14. yoke pin .15 draft gear follower.16.knuckle pin.17.knuckle thrower ds8no:0999603003. dt:.24.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 49.344.mt sold by number basis only. 05 nos. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :45066214

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132604004 1)98110123 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 4 wheeler bvzc wagons, available on rails. 1) ecr bvzc 85100429685 ,2) wr bvzc 85080150319 , 3) nfr bvzc 85050301475 , 4) scr bvzc 85099654822 , 5) scr bvzc 85090160148 . location road no.3 . at dump yard. rc items: 1.coupler bodies (nt), 2.knuckles,3.yokes, 4.draft gears, 5. striker castings (nt), 6.r.b wheel sets with axle box, 7.yoke pin support (1st plate), 8.yoke support plate(3rdplate),9. breake cylinder 300 . 10. cut of angle cock .11. cppb with control reservoir.12 .auxilary reservoir 75. 13. distributor valve ,14. yoke pin .15 draft gear follower.16.knuckle pin.17.knuckle thrower ds8no:0999603004. dt:.24.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 49.420.mt sold by number basis only.05nos delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :45066216

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132604010 1)98110123 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 4 wheeler bvzc wagons, available on rails. 1) er bvzc 85029671103, 2) cr bvzc 85019860043 ,3 special repair bvzc 85069757157 ,4) scr bvzc 85090160070 ,5) wr bvzc 85080460012 . location road no.4 . at dump yard. rc items: 1.coupler bodies (nt), 2.knuckles,3.yokes, 4.draft gears, 5. striker castings (nt), 6.r.b wheel sets with axle boxs, 7.yoke pin support (1st plate), 8.yoke support plate(3rdplate),9. breake cylinder 300 . 10. cut of angle cock .11. cppb with control reservoir.12 .auxilary reservoir 75. 13. distributor valve ,14. yoke pin .15 draft gear follower.16.knuckle pin.17.knuckle thrower ds8no:0999603010. dt:.29.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 49.120.mt sold by number basis only. 05 nos delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government/Public Sector

CTN :45054951

11 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot non ferrous scrap - p.l. no. 98230025. condemned and unserviceable aluminium scrap consisting of hhp loco top gear case housing , front and rear covers , 25 kw alternator fans , oil catchers , heat sinks , pistons , busbar, strainer , labyrinth ring, chase cover, acc housing,earthing device housing parts ,emd strainer , light fittings , distributor valve parts , gmts non drive end frame , end shields of hhp loco traction motors , after cooler core , main reservoir tanks , end shields of dynamic braking fan motor and other loco / c&w aluminium components of sorts and sizes with / without very meagre quantity of ferrous, plastic, rubber, wool, fibre , brass, copper and other orginal attachments. as is where is basis. segregation and removal of attachments not permitted. note- cssd/goc electronic weigh bridge to be used for weighment.

CTN :44952904

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot miscellaneous scrap - lot no.y.nf-37.exemp.d. 04.26.02 description- scrap iron frame with nf attachments, carbon brush with copper wire, armature, all types of choke (industrial & domestic) petromax lamp etc. [our offer :- scrap & cond. distributor valve (ek dv & c3w dv) as available in the lot.] [loading will be done by purchaser's own arrangement]

CTN :44952908

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/14/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 10079767759 boxnel (nlb) 2) sc 10099860126 boxnm1 (nlb) 3) se 30079303863 bcnam1 (nlb) 4) sc 10099763168 boxnm1 (nlb) 5) special repair 25069660255 boxnr (nlb) steel body 6) se 10079765656 boxnm1 (nlb) 7) se 10079771299 boxnm1 (nlb) 8) se 25079777622 boxnr (wm) steel body 9) se 10079771480 boxnm1 (wm) 10) sc 10099762840 boxnm1 (wm) nb: (1) : i) wagons are to be sold without 14 nos. nlb trolleys against special repairl. no. 01 to 07. ii) wagons are to be sold with 06 nos. wm trolleys against special repairl. no. 08 to 10. iii) wagons special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44952909

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/13/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 25079882746 boxnr (nlb) steel body 2) wr 10089762577 boxnm1 (nlb) 3) special repair 10069749680 boxnm1 (nlb) 4) nr 75039288897 bobsnm1 (nlb) 5) se 75079216027 bobsnm1 (nlb) 6) nr 75039188142 bobsnm1 (nlb) 7) se 75079217901 bobsnm1 (nlb) 8) cr 10019660348 boxnm1 (wm) 9) sc 25099661857 boxnr (wm) steel body 10) sc 30099368064 bcnam1 (wm) nb: (1) : i) wagons are to be sold without 14 nos. nlb trolleys against special repairl. no. 01 to 07. ii) wagons are to be sold with 06 nos. wm trolleys against special repairl. no. 08 to 10. iii) wagons special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock-a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44952910

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/16/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079216171 bobsnm1 (nlb) 2) se 75079216508 bobsnm1 (nlb) 3) nr 75039160063 bobsnm1 (nlb) 4) se 10079765663 boxnm1 (nlb) 5) se 10079772524 boxnel (nlb) 6) se 10079758115 boxnm1 (nlb) 7) se 25079663093 boxnr (nlb) steel body 8) se 10079618419 boxnm1 (nlb) 9) cr 10019860489 boxnm1 (nlb) nb: (1) : i) wagons are to be sold without 18 nos. nlb trolleys against srl. no. 01 to 09. ii) wagons srl no 01 to 09 to be sold without 36 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Spindle Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector