Latest spiral bevel gear Tenders | Government spiral bevel gear Tenders

CTN :40054712

28 Apr, 2025 14.08 Lacs

Bardhaman - West Bengal

Tender For non destructive test of vital parts of winding engine for different winding engines under bankola area. (retender) - item description/ heading, ndt of steam/ electrical winder .ut flaw detection through digital ut flaw detection machine as per is 3664:1981 including lpt for break. all comonents of winder assey e.g head gear shaft, main winder shaft, piston rod. crank shaft etc all break comonents e.g. tie rods of break assey, the rods of break assey, post connection pins, adjusting nuts, check nuts, elvis welding, tie rods etc, ndt of csg with attachments link chains, d shackles pins, d plate etc.digital ut flaw detection will be done as per is 3664:1981 and lpt as per is 3658:1999, total impact of gst for the purpose of ctc

Central Government And Public Sector

CTN :39130531

03 May, 2025 NA

Chittorgarh - Rajasthan

Tender For corrigendum : supply of llg and acceleration governor spares of ms bhel - goverinspection, calibration and testing of load limiting gear assembly item number 1 , inspection, calibration and testing of acceleration governor assembly item number 2 , spares of llg assembly item number 3 , spares of llg assembly item number 4 , spares of llg assembly item number 5 , spares of llg assembly item number 6 , spares of llg assembly item number 7 , spares of llg assembly item number 8 , spares of llg assembly item number 9 , spares of acceleration governor assembly item number 10 , spares of acceleration governor assembly item number 11 , spares of acceleration governor assembly item number 12 , spares of acceleration governor assembly item number 13 , spares of acceleration governor assembly item number 14 , spares of acceleration governor assembly item number 15 , spares of acceleration governor assembly item number 16 , spares of acceleration governor assembly item number 17 , spares of acceleration governor assembly item number 18

Central Government/Public Sector

CTN :39671456

30 Apr, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of hvla hcdas and fdsiao - helicopter deck lighting , landing period designator , stabilised horizon reference system , advanced ship glide slope indicator , helicopter crash on deck alarm system , flight deck status indicating and ordering system , lso compartment lights with control gear , air briefing room light with control gear , lso console , ob spares , commissioning spares , special cables , documentation , training cost , servce engineer charges , cost of extended warranty , any other item

Co-operative

CTN :40022918

21 Apr, 2025 3.00 Lacs

Kheri - Uttar Pradesh

Tender For supply of cost iron items for season 2025-26 - a. supply of cast iron scrapper, magma rotor, magma peddle and coupling etc with new casting, b. supply of cast iron scrapper, magma rotor, magma peddle and coupling etc on conversion basis., c. machining charges (if required), supply of boiler material on conversion basis composition is210 grade 25cr, 1.2 suitable to with stands 1000 degree c. temp., a. ci furnace grate bar, b. ci furnace grate bar jally, c. ci furnace grate bar holder, d. ci furnace nozzle, e.ci mouth piece, f. ci bag furnace chute, g. ci hanger, supply of ci v grove pully with new casting, supply of ci v grove pully on conversion basis., supply of ci bearing housing for magma mixer with new casting, supply of ci bearing housing for magma mixer on conversion basis, supply of ci duck foot bend upto size 12" on conversion basis, ms scrapper for under feed roller material is2060 (sail) pitch 70mm as per drg no. 10/6/04m grooving details as per drg no. 8/9/19, cast steel worm for crystallizer as per drg no. 90/08/17, cast steel gear 48 teeth for magma mixer as per drg no. 2k1/10/90, cast steel pinion 19 teeth as per drg no. 15/7/86b, cast steel pinion 19 teeth as per drg no. 15/7/86c, cast steel helical pinion 12 teeth as per drg material en-8, en-8 spidle with gear for super heater drain valve teeth 10 as per drg, ms fins for steam seprator for boiler furnace, cast steel sporket for mud mixture as per drg no. 05/06/09, ms sprocket as per drg no. 16/8/06d item no. a (95 teeth), ms sporcket as per drg no. 16/8/06d item no. b, cast irom worm wheel for 60 ton crystillizer od 1362mm x bore 150.6 mm x no. of teeth 72 as per drg. no. 17/8/13c, ci pulleysize od 380 mmwidth 70 mm03 nos. v groove as per drg. n o. 06/7/0r(drawing enclosed), ci pulleysize od 602 mmwidth 112 mm04 nos. v groove as per drg. n o. 07/8/07(drawing enclosed), cast steel worm for 60 ton crystallizer od 220mm as per drg no. 17/8/13c (b), hanger with nut for super heater coil of new boiler cap. 40 ton/hr pr. 45 kg./cm2 material ss-316l, cast steel driving sprocket 17 no. teeth 76.2mm pitch as per drg. no. 17/05/3m item no. 02, cast iron pulley for c-1 c/f machine od 260 dia , 08 no. v groove, b section belt as per drg. no. 19/08/14 c/f , dynamically balanced, c. i clamp for boiler no. 01 & 02 as per drg. no. r/89/07/36/90, c. i clamp for beam of boiler no. 01 & 02 (complete set with bolt & nut), (a) as per drg. no. 89/07/35a ( 01 of 02), (b) as per drg. no. 89/07/35a ( 02 of 02), c.i supporting hanger for furnace beam of boiler no. 01 as per drg., c.i furnace hanger of back side beam for boiler no. 01& 02 as per drg., c.i plate for boiler no. 03 as per drg. no. 18/92/7/rev., c.i supporting clit for furnace as per drg. l-30 nos., r-30 nos., c.i supporting plate of furnace beam for boiler no. 04 as per drg., c.i grade bar (stocker) for boiler no. 03 as per drg. no. 91/01/01 suitable for 600 degree c. temp., c.i supporting plate for window near supper heater coil of boiler no. 03 size length - 760mm x width 500 mm x thick 25 mm, c.i tunion bar for new boiler as per drg. no. 2k1/09/83, c.i attachment of tunion of boiler no. 4& 5 as per drg. , cost steel worm no. of teeth 04, pitch 64, bore 80mm, od 220 dia, width 250mm as per drg. no. 90/08/17, supply of cast steel tape wedge block for mill as per mill drawing suitable for 5000 tcd plant, burning loss @ % on conversion basis item only

Central Government/Public Sector

CTN :40040399

21 Apr, 2025 NA

Latehar - Jharkhand

Tender For supply of bearing piece complete for uncoupling gear as per rdso drg. no. wd-09034-s-13, item no. 2,3,4 and 5, alt.01. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40041493

02 May, 2025 NA

Bangalore - Karnataka

Tender For butterfly valve 300mm size, gear operated, pn16 rating, body of cast iron, seat black nitrile rubber in-situ moulded on the body, disc sg iron-nylon coated, shaft stainless steel, fitted with gear unit valve along with operating wheel, maximum pressure-16 kg to is: 13095 specifications of make l & t or substantially equivalent. note: item should be supplied along with manufacturer test certificate. warranty: 18 months from the supply. [ warranty period: 18 months after the date of delivery ]

Central Government/Public Sector

CTN :40026778

19 May, 2025 NA

Ratlam - Madhya Pradesh

Tender For supply of centre buffer coupler transition arrangement with high capacity draft gear s uitable for high tensile cbc as per drg no. skdl-3430, alt-8 and sk-62724, alt-30 containing 2 5 items. i.e. item nos. 01 to 25 of rdso drg no.skdl-3430. note : firm who are approved for hi gh tensile cbc have to arrange / purchase the draft gear from rdso approved sources onl y. in case there is no approved source from rdso for any of the components / items tender er should obtain rdso clearance for procuring such items from other sources. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40028257

15 May, 2025 NA

Vadodara - Gujarat

Tender For supply of under frame brake gear bush size (mm) 62 o.d x 52 i.d x 30 long to rdso drg. no. w d-86006-s-1, alt-4, item-4, & material conforming to str. no. wd-04 -nylon bush- 2002. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40029284

14 May, 2025 NA

Vadodara - Gujarat

Tender For supply of under frame brake gear nylon bush size=o.d. 41 x 30 i.d. x 16 mm. long to rdso drg. no. wd-88107-s-1, alt.no.4, item at s.no.8, & material conforming to str. no. wd-04-nylon bushes - 2002. [ warranty period: 30 months after the date of delivery ]

CTN :40038000

26 May, 2025 NA

Multi City - Multi State

Tender For supply of 42 teeth drive gear water pump proof mach this is a safety item as per drg.no. ske-1427 alt a specn: as per drg.\n\n

Spiral Bevel Gear Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors