Latest spiral fluted machine tap Tenders | Government spiral fluted machine tap Tenders

CTN :42413841

05 Dec, 2025 41.6 Thousand

Jabalpur - Madhya Pradesh

Tender For bid to ras supply of hss-pm/e-pm pvd tialn coated spiral fluted machine tap size m6x1-6h for blind holes, shank dia 6mm t , hss-pm/e-pm pvd tialn coated spiral fluted machine tap size m5x0.8-6h for blind holes, shank dia 6mm

State Government

CTN :43014062

17 Dec, 2025 3.00 Crore

Sirohi - Rajasthan

Tender For annual rate contract for the work of construction of 125 mm dia tube well by dth drilling rig, supply and instalation of india mark-ii hand pump set including other required material under jurisdiction of district sirohi

Central Government/Public Sector

CTN :42843695

15 Dec, 2025 4.99 Lacs

Bangalore - Karnataka

Tender For corrigendum : providing of hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; drill site preparatory works by engaging 140hp hydraulic excavator for 2 drilling units (kdr-600(4) & hdcd-400(1)) at mc palle c..

State Government

CTN :42813292

05 Dec, 2025 NA

Multi City - Telangana

Tender For corrigendum : tggenco-ytps(5x800mw)-supply of t and p items required for stage-i and chp of ytps. - ac/dc volts (40hz to 500hz):4.000v, 40.00v, 400.0v, 1000v; resistance (ohms): 400.0 ohm, 4.000 kohm, 40.00 kohm, 400.0 kohm, 4.000 mohm, 40.00 mohm; capacitance: 40.00nf, 400.0nf, 4.000 µf, 40.00 µf, 400.0 µf, 1000 µf; ac/dc current: 4.000a, 10.00aac/dc millivolts: 400.0mv; diodetest: 2.000v;ip rating: ip40safety: iec 61010-1, iec 61010-2-030 cat iii 600v, cat ii 1000v, pollution degree 2.temperature: 50-400°c, 0-50°c, -55 to 0°c.temperature: operating: 0°c to 40°c;storage: -30°c to 60°celectromagnetic environment: iec 61326-1:portableincluded accessories: test leads with caps, thermocouple, temperature probe, 2 aa batteries, user manual along with the required calibration certificates.gds 18v-400 cordless impact wrench;battery voltage: 18v; torque max: 400nm; no load speed: 0-3,400 rpm. make: boschfluke true rms ac/dc digital clamp meter with iflex probe and fluke connect modelno: 376digital multimeter, make: fluke, model: 17b+, specifications: ac/dc current 10 amps, ac/dc voltage 1000 voltsmegger, 1kvleakage current clampmeter ac, range (0-100a)portable hot air blowervacuum cleaner, dry, 1300w, 6.1kg, 230v, 50hzvibration meter, digital, model: ird 306analog phase sequence indicator, 100 to 500 v, 25 to 65 hzdigital earth resistance tester with resistivity test facility, earth resistance: 0.01 ohms-200 kohmsplier, nose, 6"/150 mmhammer, 4 lbcutting plier, 12"39 , gds 18v-400 cordless impact wrench; battery voltage: 18v; maximum torque: 400 nm; no load speed: 0-3,400 rpm. make: bosch. , fluke true rms ac/dc digital clamp meter with iflex probe and fluke connect, model no: 376, , digital multimeter, make: fluke, model: 17b+, specifications: ac/dc current 10 amps, ac/dc voltage 1000 volts, , megger, 1kv, , leakage current clamp meter ac, range (0-100a), , blower, portable hot air, , vacuum cleaner, dry, 1300w, 6.1kg, 230v, 50hz, , vibration meter, digital, model: ird 306, , analog phase sequence indicator, 100 to 500 v, 25 to 65 hz, , digital earth resistance tester with resistivity test facility, earth resistance: 0.01 ohms–200 kohms, , plier, nose, 6"/150 mm, , hammer, 4 lb, , cutting plier, 12", , tape, measuring; length: 3 m; material: steel, , tape, 5 meters measuring tape, , tape, 30 meters measuring tape, , hole punch set 22, 20, 18, 16, 14, 12, 10, 8, 6, 4 set of 10 nos (tiger make), , center punch, length: 125 mm, , drilling machine, rated power input: 800w, 240v, drilling diameter in concrete with hammer drill bits: 4-26 mm, , digital motor checker: emc-38, , transformer, auto; type: manual operated variable; input voltage: 240 vac; output voltage range: 0-270 v ac; special features: (dimmerstat) with continuously variable banana terminals, capacity: 20 amps; model: 20d-1p, , transformer, auto; type: manual operated variable; input voltage: 415 v ac; output voltage range: 0-470 v ac; phase: 3; special features: 50 hz; model: 15d-3p, , lux meter, digital, 0-50,000 lux with silicon photodiode sensor, lcd display, dc 9v battery, mandatory accessories, , tachometer, digital; speed range: 9999/99999 rpm; model: v, , digital micro ohm meter, model dmo-100d, , gun, laser, , specifications:, , laser convergence distance: 50" (127cm) ir range: -58 to 3992°f (-50 to 2200°c) emissivity: 0.10 to 1.00 adjustable, , max resolution: 0.1°f/°c, , field of view (distance to target): 50:1

State Government

CTN :42966336

15 Dec, 2025 50.00 Lacs

Kota - Rajasthan

Tender For annual rate contract for the work of drilling of 125 mm dia tube well, for hand pumps and installation of hand pumps complete with assembly and construction of platform in various villages/ towns of panchayat samiti itawa dist kota (with material)

State Government

CTN :42966346

15 Dec, 2025 50.00 Lacs

Sagod - Rajasthan

Tender For annual rate contract for the work of drilling of 125 mm dia tube well, for hand pumps and installation of hand pumps complete with assembly and construction of platform in various villages/ towns of panchayat samiti sangod dist kota (with material)

CTN :42681393

05 Dec, 2025 5.00 Lacs

Hisar - Haryana

Tender For corrigendum : supply of various tools at govt. iti nalwa - wood work technician, bevel square 150 mm (i) blade material- stainless steel, hardness- 418 hv to 460 hv(ii) stock material cast iron, fully painted(iii) wing nut and bolt material: m.s.(iv) measuring range 0 to180 (v) approx.weight-150gram(vi) operation-for testing any angle, claw hammer 500 gram (i) head made by heat treated steel, hardened upto 46 to 58 hrc with curved claw.(ii) handle 300mmx30mm dia.made by hardwood(rosewood)(iii) operation-for striking and nailing, hand brush for cleaning 450mm (i) bristle material: mexican fibre, sisal fibre, bristle length 70mm, tampico fibre, fixingin hardwood/ plastic(ii) operation-for workbench cleaning, mallet medium size (i) handle size- over all length- 385 mm, toe side- 40mm(w), 25 mm(t), heel side- 30 mm(w), 22 mm(t)(ii) made by hardwood (rosewood)(iii) operation- for striking, carpenter mortise gauge (i) adjustable spur strip 300 x 8 x 8mm 2mm, made by brass(ii) fixed spur strip size 20x8x8mm 1mm(iii) adjustment thumbscrew length15mm 2mm, dia. 15mm 2mm and shank 9mm 2mm, made by brass(iv) brass pull side and thumbscrew to enhance in gauge (v) operation-for marking along and across the grain for double line (mortise) , marking knife (i) overall length tip to handle end 200mm 2mm(ii) blade length 65mm 5, width-25mm 2, thickness- 4mm 1mm(iii) tang length-20mm, thickness 4x4mm square(iv) blade material high carbon steel, marking point sharp and 60 degree angle for accurate marking(v) handle length120mm 5,diameter15mm 2 and gripping point 10mm 2mm(vi) handle made of hardwood (rosewood)(vii) ferrule length15mm, dia.10mm,material m.s.gauge 18swg.(viii) blade hardness-60hrc(ix) operation-for marking, mortise chisel (set of 3 ) (i) overall length 250mm 5mm(ii) mortise blade width 6mm, 10mm, 15mm, thickness 15mm, cutting edge angle30 - 35 ,neck to cutting edge length150mm 4mm, tang length 40mm 2mm, uppersize- 4x4mm, lower 2 x 2mm 1mm(iii) blade length 100mm 3mm each.(iv) handle length120mm 5mm, handledia. 25-30mm 2mm, material hardwood (rosewood)(v) ferrule size length25mm,dia. 20mm,18 swg. material:m.s.(vi) steel hoop dia.-20 ,thickness-5mm 1mm, material:m.s.(vii) blade material, high carbon steel(viii) blade hardness 55 57 hrc(ix) operation-for chiselling, electric heater (i)1000/1500wattelement,standdimensions(lxwxh)-250x250x85mm(ii) madeofironheatingplatesize-200mm,heatingplatematerial-chinnimitti,nichromewirewithsturdytopoperation-for absorbing moisture ofwood, twist drill bits (set of 4 ) 6,8,10,12mm (i) cuttingangle-30 (ii) hardness:760 hrc to 900 hrc(iii) material: high speed steel(iv) operation-for drilling, cabinet scraper (i) dimensions: length-100mm ( 1) width-100mm ( 1) thickness-1mm min.(ii) material: spring steel(iii) wooden handle size-110x30x20mm,material:hardwood(rosewood),fitted with rivet(iv) operation-for scrapping, gauge chisel, scribing (set of 5 ) 6mm,10mm,12mm,16mm,20mm (i) blade material: high carbon steel(ii) cutting angle: 25 5 (iii) blade hardness- 55 to 61 hrc(iv) operation-for scribing , plumber, item name :-"v" block pair 7cm with clamp (i)size: length 7cm, width 45mm, height 45mm.(ii) material: hardened steel or cast iron(iii) v-groove angle: generally 90 degree , item name :-"v" block pair 15cm with clamp (i) sizelength: 15cm. width 75mm, height 75mm(i) material: hardened steel or cast iron(iii) v-groove angle:- generally 90 degree, item name :-bench vice 150mm (i) jaw width - 150mm ,jaw opening capacity: 150-175 mm(ii) jaw depth-70-85mm(iii) material:- cast iron body.(iv) weight: 15 - 20 kg(v) spindle :- mild steel(vi) handle : carbon steel or alloy steel(vii) thread type: acme thread (square thread)(viii diameter: around 20-25mm(ix) length: 250mm to 300 mm, item name :- metal-l 15cm (i)type : metal l square(ii) size : each arm of the l 15cm (150mm) width-20 mm(iii) material : stainless steel or carbon steel(iv) shape : 90 angle between two arms(v) accuracy : 0.01mm (vi)finish : anti rust coati

CTN :42850666

04 Dec, 2025 NA

Dharmapuri - Tamil Nadu

Tender For purchase of drilling machine, cnc wood cutting station and material storage setup for mechanical workshop - (fsd purpose)

State Government

CTN :42897000

08 Dec, 2025 1.50 Crore

Jaipur - Rajasthan

Tender For rate contract for drilling of 125 mm diameter bore holes for hand pumps and installation of india mark ii/iii hand pumps complete with platform (with material) in all type of strata for phed district rural division-ii district jaipur

corporations/Associations/Others

CTN :42920651

10 Dec, 2025 1.89 Crore

Kutch - Gujarat

Tender For 1. construction of material recovery facility unit at solid waste management site at rapar .2. construction of 4 storage rooms at soild waste management site at rapar.3. construction of machine room - store room & site office at soild waste management site at rapar.4. construction of weigh bridge ticket office at soild waste management site at rapar.5. supply, installation, testing and commissioning of cctv system .6. providing and supplying pit mounted electronic weigh bridge at rapar.7. construction of new cc road at solid waste management site at rapar.8. construction of 1.00 lac litre under ground sump at solid waste management site at rapar.9. drilling of tubewell (200mm dia. x 60 m deep) by solid waste management site at rapar .10. supplying, lowering, laying and jointing of 63 mm dia. 6 kg/sq.cm upvc pipe at solid waste management site at rapar11. providing, supplying & erecting street light pole with led lights at soild waste management site at rapar.

Spiral Fluted Machine Tap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

State Government

State Government

State Government

corporations/Associations/Others