Latest spiral slide Tenders | Government spiral slide Tenders

CTN :45318358

04 Jun, 2026 NA

Faizabad - Uttar Pradesh

Tender For providing of facility management services - lumpsum based - open gym machine; stable machine; cost of consumable to be reimbursed to service provider on actual

State Government

CTN :45268829

09 Jun, 2026 NA

Satna - Madhya Pradesh

Tender For 2026_mpfd_2026_27_03 open gym equipment - straight frp slide web slides spiral slide two-seater hammock four-seater circular/merry-go-round type swing four-seater see-saw multi-play system (including hexagonal deck) item b air walker single single abdominal bench body balance chest press leg press double cross trainer single shoulder press surf board pendulum cycle double

Central Government/Public Sector

CTN :45213916

26 May, 2026 NA

Umrer - Maharashtra

Tender For providing of facility management services - lumpsum based - annual upkeep and maintenance of community hall staff club and gym under town administration of umrer area 2nd call; o&m civil; consumables to be provided by service provider (inclusive in contract cost)

corporations/Associations/Others

CTN :45111401

14 May, 2026 5.14 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing new children play equipments in various parks of sector 27 and 28 chandigarh under ward development fund. - providing and fixing of horizontal bridge ladder 10 long, high, 2 wide made of m.s.angle /pipe completed as per ca s drg.no.02 of job no.m-02., m.a.p.s.(jumbo 3 x 1)sr.no. description qty.1. standard see saw 01 no.2. double swing 01 no.3. wave slide 5 ht. 01 no.area : 4m x 4msafe area : 5m x 5m(jumbo 3 x 1 ) set consist of standard see saw:this items provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush type.double swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide: the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., multi activity play systemspecifications:-s.no. description qty.1 sq. deck 7 -0 h with canopy 12 sq. deck 5 -0 h with canopy 13 sq. deck 3 -0 h with canopy 14 sq. deck 4 -0 x 4 -0 with 3 -0 ht 15 straight inclined bridge 4 -0 long 16 swing bridge 8 -0 long 17 spiral slide 5 -0 ht 18 double wave slide 7 -0 ht. 19 cross stairs 5 -0 ht 110 ladder 7 -0 ht. 111 triangular stairs 3 ht. 112 split level ladder 113 double wave slide 3 -0 ht. 114. expansion ladder 7;-0 & 3 -0 2brief descriptions/sizes of different components of multiplay systems:-i. square deck of size 4 -0 x 4 -0 :- the size of sq. deck shall be 4 -0 x 4 -0 . the vertical supporting pipes shall be of minimum size 80 nb g.i. pipes or as required with nylon roof clamps attached to its. the horizontal supporting members shall be of m.s. angle of minimum size 40x40x5 mm or as required. the platform of the ladder shall be of aluminum chequred plate of minimum thickness 16 swg or as required. ii. canopy: - the canopy over square deck shall be made in two layers of fiber reinforced plastic with minimum thickness of 3 mm and the same shall be supported on structural framework of m.s. square pipe. the layers of iso gel coat shall be applied over canopy and two extra layers on the flange. the colour, design and finish of the outer surface of the canopy shall be as approved by engineer-in-charge.iii. double wave slide 3 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. the layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame of the slide shall be made from g.i. pipe of minimum size 25 nbv. the pipes shall be powder coatediv. double wave slide 7 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame shall be made from g.i. pipe of minimum size 25 nb. the pipes shall be powder coated. additional h type support shall be provided in the center.v. spiral slide 5 -0 :- the spiral slide chute shall be made of frp having minimum shell thickness of 4 mm and the same shall be supported on center support of g.i. pipe having minimum size of 80 nb. the backside of the slide surface shall be mat. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the landing module shall be supported on gi pipe of minimum size 20 nb powder c

corporations/Associations/Others

CTN :45151624

18 May, 2026 5.14 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing new children play equipments in various parks of sector 27 and 28 chandigarh under ward development fund. - providing and fixing of horizontal bridge ladder 10 long, high, 2 wide made of m.s.angle /pipe completed as per ca s drg.no.02 of job no.m-02., m.a.p.s.(jumbo 3 x 1)sr.no. description qty.1. standard see saw 01 no.2. double swing 01 no.3. wave slide 5 ht. 01 no.area : 4m x 4msafe area : 5m x 5m(jumbo 3 x 1 ) set consist of standard see saw:this items provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush type.double swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide: the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., multi activity play systemspecifications:-s.no. description qty.1 sq. deck 7 -0 h with canopy 12 sq. deck 5 -0 h with canopy 13 sq. deck 3 -0 h with canopy 14 sq. deck 4 -0 x 4 -0 with 3 -0 ht 15 straight inclined bridge 4 -0 long 16 swing bridge 8 -0 long 17 spiral slide 5 -0 ht 18 double wave slide 7 -0 ht. 19 cross stairs 5 -0 ht 110 ladder 7 -0 ht. 111 triangular stairs 3 ht. 112 split level ladder 113 double wave slide 3 -0 ht. 114. expansion ladder 7;-0 & 3 -0 2brief descriptions/sizes of different components of multiplay systems:-i. square deck of size 4 -0 x 4 -0 :- the size of sq. deck shall be 4 -0 x 4 -0 . the vertical supporting pipes shall be of minimum size 80 nb g.i. pipes or as required with nylon roof clamps attached to its. the horizontal supporting members shall be of m.s. angle of minimum size 40x40x5 mm or as required. the platform of the ladder shall be of aluminum chequred plate of minimum thickness 16 swg or as required. ii. canopy: - the canopy over square deck shall be made in two layers of fiber reinforced plastic with minimum thickness of 3 mm and the same shall be supported on structural framework of m.s. square pipe. the layers of iso gel coat shall be applied over canopy and two extra layers on the flange. the colour, design and finish of the outer surface of the canopy shall be as approved by engineer-in-charge.iii. double wave slide 3 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. the layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame of the slide shall be made from g.i. pipe of minimum size 25 nbv. the pipes shall be powder coatediv. double wave slide 7 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame shall be made from g.i. pipe of minimum size 25 nb. the pipes shall be powder coated. additional h type support shall be provided in the center.v. spiral slide 5 -0 :- the spiral slide chute shall be made of frp having minimum shell thickness of 4 mm and the same shall be supported on center support of g.i. pipe having minimum size of 80 nb. the backside of the slide surface shall be mat. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the landing module shall be supported on gi pipe of minimum size 20 nb powder c

Corporations And Associations And Others

CTN :44811235

12 May, 2026 2.47 Crore

Rampur-Up - Uttar Pradesh

Tender For corrigendum : construction of multipurpose sports facility (hall/gym/squash hall) at nagar palika parishad rampur district-rampur

CTN :45113683

18 May, 2026 NA

Ajmer - Rajasthan

Tender For providing of facility management services - lumpsum based - supply for manlapene hdpe open gym; supply for manlapene hdpe open gym; consumables to be provided by service provider (inclusive in contract cost)

CTN :45113754

18 May, 2026 NA

Ajmer - Rajasthan

Tender For providing of facility management services - lumpsum based - supply for manlapene hdpe open gym; supply for manlapene hdpe open gym; consumables to be provided by service provider (inclusive in contract cost)

CTN :45114661

18 May, 2026 NA

Ajmer - Rajasthan

Tender For providing of facility management services - lumpsum based - supply for manlapene hdpe open gym; supply for manlapene hdpe open gym; consumables to be provided by service provider (inclusive in contract cost)

Central Government/Public Sector

CTN :44961121

01 May, 2026 NA

Mumbai - Maharashtra

Tender For supply testing commissioning and installation of gym equipmenta - axiom dual lat pulldown/low row with luxury trim and double stitched upholstery ph-oplrthe axiom series lat pulldown/low row accommodates two exercises that target the entire back and rear shoulder muscle groups. the clean, inviting look is appealing to all exercisers. frame fully welded 11-gauge steel frames electrostatic powder coat finish for maximum durability tower consistent low profile 53 (135 cm) tower full front (or optional rear only) weight stack shrouds adjustments visible, color contrasting, yellow adjustment handles. latex free rubber over molded adjustment handles. weight plates solid steel 15 lb (7.5 kg) weight plates push / pull increment weight: 7.5 lbs (3.75 kg) top weight plate is fitted with self-lubricated bushings magnetic weight selector pin locks into place biomechanics work-arm movements that correctly align with user joint movements, provide a natural, comfortable feel throughout the entire range of motion. variable cams & machine design replicate the body s natural strength profileinstructional placards qr coded / nfc chipped placards pictorially illustrate the muscles trained, proper machine set up & use, for easy to follow instructions regardless of language.size (l x w x h): 91 x 50 x 85 metric (cm): 231 x 127 x 216 recommended live area (l x w x h): 115 x 86 x 97 metric (cm): 292 x 218 x 246weight: 452 lbs (205 kg) *weight stack (includes increment weight): 202.5 lbs (101.25 kg) max user weight: 300 lbs (136 kg)key features: accommodates two exercises that target the entire back and rear shoulder muscle groups comes standard with lat pulldown bar and neutral grip row handle foot pegs provide additional user stability during row angled thigh pads stabilize users without the need of an additional adjustmentframe colour: standard colour upholstery colour: standard colourworking arm colour: standard colour frame, hammer strength select standing calf hs-scthe hammer strength select standing calf is a fundamental part of the strength training progression. nine pad height positions accommodate all users, and contoured non-slip foot plates allow users ankles to move in a full range-of-motion. the 22 pieces in the hammer strength select line provide an inviting introduction to hammer strength equipment. dimensions (l x w x h): 58 in x 45 in x 71.5 in (148 cm x 115 cm x 182 cm) weight: 680 lb (309 kg) weight stack weight in kgs: 195frame colour: standard colour upholstery colour: standard colourworking arm colour: standard colour frame, hammer strength plate loaded v-squat pl-vsqthe plate-loaded v-squat is designed to have a natural squatting motion, while reducing back and knee strain through a curved arc of motion. it also employs a standard counter balance for lower starting resistance. starting resistance: 54 lbs (24.5 kg) dimensions (l x w x h): 91 in x 42 in x 81 in (232 cm x 107 cm x 206 cm) weight: 530 lb (241 kg)"frame colour: standard colour upholstery colour: standard colourworking arm colour: standard colour frame, signature plate loaded incline press splipthe signature series incline press uses horizontal grips to simulate a more traditional bench press, converging movements for a natural forward pressing motion, and iso-lateral movements for equal strength development. signature series plate-loaded enhances any facility and utilizes independent converging and diverging movements for an instinctively natural experience. dimensions (l x w x h): 50 in x 62 in x 75 in (127 cm x 158 cm x 191 cm) weight: 297 lb (135 kg)"frame colour: standard colour upholstery colour: standard colourworking arm colour: standard colour frame, signature plate loaded decline chest press spldcp dimensions (l x w x h): 51 in x 69 in x 76 in (130 cm x 176 cm x 194 cm) weight: 340 lb (155 kg)"frame colour: standard colour upholstery colour: standard colourworking arm colour: standard colour frame, axiom dual leg extension/leg curl with luxury trim

Spiral Slide Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

Corporations And Associations And Others

Central Government/Public Sector