Latest split casing pump Tenders | Government split casing pump Tenders

corporations/Associations/Others

CTN :45567904

22 Jun, 2026 11.33 Lacs

Chandigarh - Chandigarh

Tender For emergent fabrication, providing and fixing of complete spare rotating assembly for 603 hp horizontal split casing pump along with repair of existing defective 603 hp motorized pump set at huda pump house water works sector-39, chd under sde mcph1 chd

State Government

CTN :45445001

24 Jun, 2026 60.00 Lacs

Jummu - Jammu And Kashmir

Tender For installation of electro-mechanical equipment at cps muthi for water supply to durga nagar. - h.c pumping units-2no-providing, installation, testing and commissioning of 50000 gph x 150 mtrs. head (02 no.s) horizontal centrifugal split casing pump with slow peed motor at cps muthi by way of excavation of earth work for laying of rcc foundation block. the job includes construction of foundation block for installation of 50000 gph x 150 mtrs. hend horizontal centrifugal pump set at cps muthi. by way of dismantling of old foundation blocks with the help of required tool and tackle and manual labour as per site requirement. disposing off the excavated material from the site to distance of at least 0.50 km with the help of manual labour and mechanical transport. job includes digging of pit of size 6x3.5x4and disposal of excavated material from the site of the work to the place of dumping. providing/lying of rcc foundation block of size 5x3.5x5(labove the ground level) in 1:2:3 cement concrete mix having requisite reinforcement with 12 mm dia. tor steel from center to center with proper spacing. fabrication and fitting of foundation bolts duly welded with cross members and threading at top with nut. foundation bolt shall be welded with tor steel and firmly grouted in the cement concrete mix, plastering and finishing from outside: fitting of base frame plate on the top of the block and leveling it both horizontally as well as vertically. strengthening of the base frame by providing and welding of m. s. channel cross members of required size and as per the size of frame for giving extra strength against vibration of the unit and on full load running conditions. complete job includes cost of material and labour charges for laying of the foundation block, plastering and finishing. placing horizontal centrifugal pumping unit on the base frame by using hydra crane, chain block, manual labour and other tools and tackles. leveling of the pump and motor properly on the base frame and coupling them by fitting of the m.s. coupling bolts with nuts rubber bushes and m.s. fasteners required for horizontal centrifugal pumping unit base connections with base frame job includes cost of material, carriage of machinery and allied materials to the site of work, loading/unloading and allied charges.suction line: fabrication of suction line by providing / fabrication of ms pipe of dia 150 mm. of length as per site requirement (09 mtr approx.) proper beveling of ms pipe for v-butt welding joints. the job includes providing and. fabrication of ms bends of 150 mm dia out of ms pipe 150 mm dia. providing/fabrication / fitting of ms flanges-4no wherever required and with the one flange compatible to be fitted the suction flange of both the pumps. job includes providing and fabrication of ms bends of 150 mm dia -04 no. the job also includes providing and fitting of sluice valves of 150 mm dia. (cs material)- 02no.(01 no.for each suction line of 02 pump sets) on suction lines. providing, fabrication and fitting of ms flanges at both end of sluice valve as per site requirement.delivery line: fabrication of delivery line by providing and fabrication of ms pipe 125 mm. upto manifold. proper beveling of ms pipes for v-butt welding joint. job includes fabrication/fitting of ms pipe 125 mm dia. upto manifold. job also involves making interconnection with manifold with the delivery flange of newly installed pumps. the job involves fabrication/fitting of ms bends as per site requirement no-02 out of 125 mm dia. ms pipe. fabrication of 04 no. ms flange of 125 mm dia. to match delivery flange of the pump and welding of flange with one end of the bend. makes interconnection of manifold with delivery pipe. job also includes providing/fitting of sluice valve (cs)-2no and reflux valve of 125mm-2no (cs material) on delivery side of each pumpset by the way of welding for on delivery line. all the welding work shall have to executed butt pre heated high pressure welding electrod

State Government

CTN :45401958

09 Jun, 2026 17.79 Lacs

Hisar - Haryana

Tender For annual maintenance estimate for main water works tosham road hisar (2026-2027) - annual maintenance of main water works tosham road hisar (2026-2027). “supplying, erection, testing and commissioning of horizontal centrifugal split casing pumping set of 2 nos. 6800 lpm 40 hp pump set and 3400 lpm pump set with motors including copper cable and control panels at main water works tosham road hisar and all other works contingent thereto” (including three years maintenance and defect liability period free of cost) a/c rs 17.80 lacs

CTN :45316672

01 Jun, 2026 67.0 Thousand

Kathua - Jammu And Kashmir

Tender For repairs to 5 cusec x 11.5 mtr head horizontal split casing pump of unit-iii along with allied works at lis jandi.

CTN :45264912

12 Jun, 2026 NA

Kalpakkam - Tamil Nadu

Tender For supply of kirloskar split casing pump , coupling sw225 coupling , casing gasket set , bearing housing , mechanical seal , shaft , casing

State Government

CTN :45230943

21 May, 2026 NA

Chandrapur - Maharashtra

Tender For work of ct pond, acw/ccw sump cleaning & repair of suction strainer of pump during u-7 overhaul at odp-ii, cstps, chandrapur.

CTN :45226586

23 May, 2026 13.19 Lacs

Mumbai - Maharashtra

Tender For providing horizontal split casing pumpset for water supply in ekta vihar cgs colony, cbd belapur, navi mumbai.

Central Government/Public Sector

CTN :45217900

25 May, 2026 4.45 Lacs

Dhanbad - Jharkhand

Tender For a)repairing and overhauling of failed kirloskar make dsm-3me horizontal split casing pump serial no.13006a of laikdih railway siding qty.01 number.(b)mechanical repairing of roto dyne make pump(1200 gpm,6 stage,model 125-350) at kalimati sump pumping

Central Government/Public Sector

CTN :45217898

25 May, 2026 1.10 Lacs

Bardhaman - West Bengal

Tender For complete repairing of kirloskar make horizontal split casing pump model 6up3 of manbaria water filtration plant cv area xii qty 01 number equipment serial no.man/p/002

CTN :45137187

25 May, 2026 NA

Chhindwara - Madhya Pradesh

Tender For supply of water supply maintenance item - list, 5 hp (submersible moter), 3 hp (submersible moter), 7.5 hp (submersible moter), 10 hp (submersible moter), 12.5 hp (submersible moter), 15 hp (submersible moter), 17.5 hp (submersible moter), 20 hp (submersible moter), 1 hp (submersible moter), 2 hp (submersible moter), 5 hp (pandubbi moter), 3 hp (pandubbi moter), 7.5 hp (pandubbi moter), 10 hp (pandubbi moter), 12.5 hp (pandubbi moter), 15 hp (pandubbi moter), 17.5 hp (pandubbi moter), 20 hp (pandubbi moter), 1 hp (pandubbi moter), 2 hp (pandubbi moter), moter busshing work, thrush bearing, cable, 1.5 sqmm, 2.5 sqmm, 4 sqmm, 6 sqmm, 10 sqmm, 12 sqmm, ampuller v- 6, diffusser c.i., rotor turnning, lower housing, upper housing, 120 hp motor rewainding, turbine 120 hp v.t. pump repairing, drive shaft + gland portion, v.t. pump drive shaft 120 hp, spider seelve, spider bush, racheit bearing (spherical), turbine oil, bowl bush, 120 hp connection plate, bearing 6309, 120 hp cuppler, mn x 95 coil, mn x 95 point set, oil startor point 50 hp, oil startor 50 hp new, cable alluminium (armourd 95 sqmm), bearing 6310 c3, list - grip, 32 amp, 63 amp, 100 amp, 200 amp, list - capacitor, 3 kvr, 5 kvr, 8 kvr, 10 kvr, 12 kvr, new panel star delta 10 hp, new panel star delta 20 hp, list - new panel dol, 5 hp, 7.5 hp, 10 hp, list - lug, 6 sqmm, 8 sqmm, 25 sqmm, 50 sqmm, 75 sqmm, 95 sqmm, 120 sqmm, mn x 95 relay unit, pump shaft v-6, mn 10 contector, mn 12 relay unit, single phase priventor, mu-2 contactor, star delta timer, volt meter, on-off switch, 120 hp panel contactor (fdv type 120 hp), transformer oil, cheack nut 45 hp, grafite gland rope 12 mm, bearing 6312 c3, water sensor level;, 120 hp split casing pump repairing, list - valve repearing work, cheack nut new size 80 mm, cheack nut new size 100 mm, cheack nut new size 110 mm, cheack nut new size 160 mm, cheack nut new size 200 mm, cheack nut new size 250 mm, rod new size 80 mm, rod new size 100 mm, rod new size 110 mm, rod new size 160 mm, rod new size 200 mm, rod new size 250 mm, cheack nut thread making size 80 mm, cheack nut thread making size 100 mm, cheack nut thread making size 110 mm, cheack nut thread making size 160 mm, cheack nut thread making size 200 mm, cheack nut thread making size 250 mm, rod thread making size 80 mm, rod thread making size 100 mm, rod thread making size 110 mm, rod thread making size 160 mm, rod thread making size 200 mm, rod thread making size 250 mm, g.i.pipe thread making size 1", 2", 3", 4"

Split Casing Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector