Latest split pin cotter Tenders | Government split pin cotter Tenders

Central Government/Public Sector

CTN :45343198

02 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For auction sale of others - released condemned and u/s scrap contain ferrous, copper, aluminum and pvc consisting, (1) rotary switch all size (16,63a etc), qty- 23 nos, (2) contactor all size (16,32a etc), qty- 30 nos, (3) led light fitting 18w/9w, qty-118 nos,(4) led light fitting b1, qty-110 nos, (5) led tube 9w, qty- 293 nos, (6) pcb for bldc fan 400 mm sweep, qty- 68 nos, (7) tail lamp fitting 110v, qty-07 nos, (8) return air filter 680 mm x 415mm, qty- 70 nos, (9) ac filters all size fresh & return air 620mmx 460 mm & 550mmx 500mm , qty-70 nos, (10) fresh air filters 480mm x 260mm, qty-120 nos (11) compressor scroll r22/r 407, qty- 20 nos, (12) led driver 9w & 18 w, qty-213 nos, (13) mcb & mpcb all size (6,16,32,63a etc). qty- 122 nos, (14) voltmeter 1000v/750v, qty-58 nos, (15) mmr 1000v, qty- 69 nos, (16) electronic thermostat 2-5 w, qty- 04 nos, (17) bldc fan 110 v dc, qty-170 nos (18) rmpu unit 7tr, qty- 02 nos, (19) mini pantry (hot case, 500w), qty- 16 nos, (20) mini pantry (deep freezer,25 ltr), qty- 16 nos, (21) condenser fan blade 21 inch/24 inch, qty-13 nos, (22) feeder contactor for lhb 1000a, qty- 03 nos,(23) contactor 200amp all, qty-22 nos, (24) regulated battery charger 6.5 kw, qty- 01 nos, (25) refrigerator 240/310 ltr, qty- 05 nos, (26) emergency battery charger 2.5 kw, qty-20 nos, (27) control transformer 100va 750v, qty- 40 nos, (28) control transformer 200va, qty- 19 nos, (29) control transformer 400va, qty-04 nos, (30) control transformer 300va, qty- 01 nos, (31) rc filter 415v, qty-24 nos, (32) control led driver pcb, qty-10 nos, (33) uic coupler 13 pin, qty- 43 nos, (34) heater unit complete, qty- 03 nos, (35) d.m plant, qty- 02 nos, (36) alternator 25 kw, qty-02 nos, (37) erru 25 kw, qty-02 nos, (38) 25 kva inverter, qty- 02 nos, (39) spare contactor coil 250v500 ac/dc, qty- 03 nos, (40) capillary 5 way, qty- 01 nos, (41) cfl 4 pin, qty- 50 nos, (42) deep freezer, 100/200 ltr, qty-01 nos, (43) condenser motor 3 ph 415v, qty- 10 nos, (44) mono block pump 3 ph 415v, qty-10 nos, (45) cooling coil lhb, qty-04 nos, (46) condenser coil lhb, qty-04 nos, (47) contactor k44 200a, qty-33 nos, total qty-11720 kg(11.720mt), location- coaching depot indore. mode of delivery by actual weighment basis and on as is where is basis, cutting permitted, custodian- sse-ac-tl-indb, fdp-50 days. note- original e-waste certificate cum passbook will be required at the time of delivery.

corporations/Associations/Others

CTN :45171789

03 Jun, 2026 NA

Salem - Tamil Nadu

Tender For corrigendum : supply of spares for gravimetric feeders 7 items - feeder head pulley half coupling, feeder head pulley half coupling pin with lock nut & spring washer, feeder spares 1 set consists of i) belt tensioning guide block, ii) belt tensioning bush,iii) belt tensioning screw,, shear pin, idler bearing cup, rubber logged gun metal bush, head pulley bearing cup with retainer flange and plate

corporations/Associations/Others

CTN :45328177

05 Jun, 2026 62.00 Lacs

Kaushambi - Uttar Pradesh

Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on turnkey basis under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of centralised materials, 11 kv switch gear 600/300/5a 350 mva i/c, 11 kv switch gear 200/100/5a 350 mva o/g, 11 kv 3x300 mm2 xlpecable, 11 kv 3x120 mm2 xlpecable, 24 volt battery, 24 volt battery charger, pcc. 8.5 mtr. long for feeder, 11 kv tpmo switch with fixing clamp, 11 kv top channel, 11 kv dropper angle, earthing complete, stay set complete, 11 kv polymer pin insulator, 11 kv polymer disc insulator, 11 kv disc fiting, 33 kv control panel t/f, acsr weasel conductor, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as join

State Government

CTN :45317543

01 Jun, 2026 NA

Multi City - Telangana

Tender For tggenco-ytps-supply of gravimetric feeder spares for hp1103 bowl mill in boiler -ii division. - calibration roller complete assembly, bearing housing,inlet spanroller, bearing housing,weigh spanroller, bearing housing, calibration roller, grease sealfor belt takeup pulley for inlet, weigh span roller grease seal for inlet, grease seal for calibrating for inlet, tension roll grease seal for inlet, wear sleeve belt take up for inlet, tension roll wear sleeve for inlet, drag ling assembly for inlet, bolt for drag ling, bolt for belt takeup rail support for inlet, weigh span roller pre loading washer for inlet, bolt forweigh module, tension roll pivot bolt for inlet, bearing housing-ii for weigh span rollers, retainer ring for calio shaftfor inlet, weigh span roller retainini ring for inlet, tension roll retainer ring for inlet, inlet span roller retainer ring for inlet, weigh span roller hanger rod, ring,retaining, block belt takeup for inlet, belt takeup pulley assy shaft for inlet, inlet skirt (rh) for inlet, inlet skirt (lh), end skirt for inlet, levelling bar for inlet, head pulley wear sleeve, bulls eye glass for inlet, shear pin for coc shaft, coal on belt padoie for inlet, coal on belt grease seal for inlet, oil seal, 70x85x8 mm, counter weight,of weighsensing system

CTN :45339249

08 Jun, 2026 NA

Multi City - Multi State

Tender For supply of split pin cotter steel size 10 x 112 mm long to is:549/2005, table-1 rev.-3, [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45287473

28 May, 2026 NA

Chandrapur - Maharashtra

Tender For procurement of spares of bottom ash hopper feed gate, hydro ejectors and liners for clinker grinder during u#8 aoh at ash handling plant cstps, chandrapur. - 85tph liner pn be1440d-01, 85tph liner pn be1440d-02, feeder ejector ayems inlet liners, slight glass assly size-3/4" n3922, hopper driplex inspection glass 220 mm, macawber beekay gland follower, bearing cover (1 set = 4 nos.) be1435d, bearing block (1 set = 4 nos.)be1434d, spur gear be1437d, shaft stuffing block be1431d, gate liner for door frame thick 24 mm, gate liner thickness 14 mm, fed gate side guide plate pn be5064d, fed gate flood light assly be3749d-02, complete feed sump assembly with liner, throat & discharge piece(be 3261d-03), fed gate bracket,pin &piston rod clevis, feed gate cylinder assy pn be4865d, feed gate tecpro sys power cyl seal set, ahp basys fdgate guide rail, fed gate lower wedge be1121d-b, fed gate upper wedge be1121d-a

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

State Government

CTN :45279132

04 Jun, 2026 1.66 Crore

Udhamsign Nagar - Uttarakhand

Tender For work of construction of a new 11 kv feeder for bifurcation of overloaded 11 kv chakarpur feeder under edd khatima in capital s.i. head, including supply of decentralized materials, as per tender specification. - annexure-a (supply of following material as per upcl norms.), bracing clamp for sp-55 with nut and bolt., pp & clamp with nut and bolt st pole sp-55., stay clamp for sp-55 with nut and bolt., pp & clamp with n&b st pole sp-72., pp & clamp with n&b pcc pole, 8.5 mtr., stay clamp for pcc pole., ht stay insulator., 33 kv suspension ties on every pin insutlator., ipc with aluminium bail for earthing., 11 kv ipc for covered to covered cond., 11 kv ipc for covered to bare conductor., 11 kv mid span jointing kit., 11 kv aaac covered cond. al-59, 99 sq.mm., 11 kv tension clamp with bail & ipc., annexure-b (following work as per upcl norms), chemical earthing., fabrication of steel., excavation of pit for stay set., erection of 11 kv stay set,, grouting of stay set., excavation of pit for pole., erection of single pcc pole., erectin of single sp-55 pole., erection of single sp-72 pole., erection of pcc double pole., erection of sp-55 double pole., grouting of pole., muffing of pole., painting of sp-55 pole., lopping and choppong of tree branchases., cartage of pcc pole, 51-70 k, cartage of sp-55 pole, 51-70 km., cartage of sp-72 pole, 51-70 km., cartage of petty material, 51-70 km., headload cartage of pcc pole, 0-1 km., headload cartage of sp-55 pole, 0-1 km., headload cartage o sp-72 pole, 0-1 km., headload cartage of material, 0-1 km., fixing of 33 kv suspension ties., fixing of ipc with al, bail for earting., jumpering of d/p tpmo, fuse set and t/f., jumper section pole., fixing of 11 kv 90 kn tension clamp b&ipc., fixing of 11 kv ipc for cc to cc cond., fixing of 11 kv ipc for cc to bare cond., fixing of 11 kv mid span jointing kit., laying spreading, stringing aac conductor

CTN :45298003

05 Jun, 2026 NA

Paschim Medinipur - West Bengal

Tender For supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , moulded case circuit breakers (mccb) conforming to is/iec 60947 (part 2) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , led luminaire for floodlight conforming to is 10322 (part 5/section 5) (v3) (under bis scheme - ii) (q2) , supply and fixing switch socket combination 5 pin, 5 amps flush type. complete all as specified and directed in boq spec file , supply and fixing switch socket combination 2 in 1, 5 amps by 16 amps flush type complete all as specified and directed in boq spec file , supply and fixing distribution board db vtpn 6way out of sheet metal enclosure.complete all as specified and directed in boq spec file , supply and fixing distribution board db tpn 4 way made out of sheet metal enclosure complete all as specified and directed in boq spec file , supply and fixing distribution board db spn 8 way made out of sheet metal enclosure complete all as specified and directed in boq spec file , supply fixing and conmmissioning of one heavy duty plus 30 mtr high mast pole fabricated from hot dip gi steel in three section bottom section of 10500 mm length complete all as specified , supply, installation, and commissioning of a feeder panel for a 30 m high mast lighting system with a load capacity of 7kv. , supply ,testing and commissioneng of lt control panel outdoor type of toe 1.6x1.5x0.75 m having provision of double door. complete all as specified and directed in boq spec file , supply and fixing earthing complete with galvanised steel earth plate tree 50-60cm x 6mm directly in ground.complete all as specified and directed in boq spec file , instalation, testing and commissioning of lt bus bar feeder piller box outdoor type having provision of double door openings.complete all as specified and directed in boq ) /bid number : gem/2026/b/7570938 * /dated: 22-05-2026 & & / bid document 1 / 32 spec file , supply and laying fly ash bricks well purnt old size designation 75 per 1000 laid dry flat for protection of cable.complete all as specified and directed in boq spec file , high mast electrical system,complete all as specified and directed in boq spec file , concealed point wiring complete using 1.5 sqmm pvc insultated sheathed copper cable frlsh 1100 volts , earth dolly for one 3 pin, 5 amps socket outlet in the independent board. , concealed point wiring complete using 2.5 sqmm pvc insultated sheathed copper cable frlsh 1100 volts , for power point on independent board. , supply of laying and digging excavation of foundation pit of size 5ft x 5ft x 5.5ft 4.5ft below ground level and 1ft above ground level complete all as specified and directed in boq spec file , supply and installation of minimum 3.3 tall meters triple lamp post features en attractive 19th-century lamp design.complete all as specified and directed in boq spec file , digging and laying removing excavated material soil not exceeding 50 m.complete all as specified and directed in boq spec file , returning filling in including spreading leveling watering.complete all as specified and directed in boq spec file , sand cushioning for ug cable 8 cm before laying the cable.complete all as specified and directed in boq spec file , supply of laying and digging in trenches by post holes in soft by loose soil not exceeding 1.5 mtr wide.complete all as specified and directed in boq spec file , material and labour of concealed three phase sub main wining using single core pvc insulated cable frls 4x10 sqmm copper conductor multi stranded and 1x10 sqmm copper conductor insulated cable , material and labour of concealed sup main wiring using two single core pvc insulated cable frls 6 samm copper conductor muti stranded and 6.0 sqmm copper conductor insulated cable frls

CTN :45285299

08 Jun, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of flat split pin cotter size 5x12x71 mm, as per is-2638/ 1974, and is-549/1974 [ warranty period: 30 months after the date of delivery ] ]

Split Pin Cotter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

State Government

State Government

State Government

State Government