Get complete information related to latest Splitter Machine Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Splitter Machine Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Splitter Machine Tenders.
Tender For supply of 15watt, led recessed luminaire (ceiling light) clairr(clec15), led luminaire system efficacy (in lumen/watt): 90, shape of the fixture: round, size of the fixture: 150mm, type of mounting: recessed, led luminaire (recessed luminaire) with smd led chip, greater than equal to 120 degree beam angle, greater than equal to 85% led driver efficiency, greater than equal to 80 cri (colour rendering index), greater than equal to 0.90 power factor and rated voltage 220-240 volt, 50 hz, single-phase, minimum led chip efficacy (in lumen/watt): 130, led colour temperature: 6500k, diffuser material: polycarbonate (uv stabilized), input operating voltage range (ac, 50 hz): 90 volt to 300 volt, led life (in hours): 50,000, number of electronic control gear in the luminaire (power supplies): 1, total harmonics distortion: less than equal to 20% (for up to 20w) with ip20, conforming to is: 10322. [ warranty period: 30 months after the date of delivery ] ]
Tender For corrigendum : supply of 15watt, led recessed luminaire (ceiling light) clairr(clec15), led luminaire system efficacy (in lumen/watt): 90, shape of the fixture: round, size of the fixture: 150mm, type of mounting: recessed, led luminaire (recessed luminaire) with smd led chip, greater than equal to 120 degree beam angle, greater than equal to 85% led driver efficiency, greater than equal to 80 cri (colour rendering index), greater than equal to 0.90 power factor and rated voltage 220-240 volt, 50 hz, single-phase, minimum led chip efficacy (in lumen/watt): 130, led colour temperature: 6500k, diffuser material: polycarbonate (uv stabilized), input operating voltage range (ac, 50 hz): 90 volt to 300 volt, led life (in hours): 50,000, number of electronic control gear in the luminaire (power supplies): 1, total harmonics distortion: less than equal to 20% (for up to 20w) with ip20, conforming to is: 10322. [ warranty period: 30 months after the date of delivery ] ]
Tender For corrigendum : supply of zero toe load fastening system(ztlf) for h beam sleepers for bg 60 kg rails as per rdso drawing no. t-8759 to t-8765. 1 set of fastening consists of 02 nos. of rail pad with embedded steel plate (t-8761), 02 nos. of special cast liner (inner) for 60 kg uic rail (t-8762) 02 nos. special cast liner (outer) for 60 kg uic rail (t-8763) galvanized erc mk-v (t-5919) [ warranty period: 30 months after the date of delivery ] ]
Tender For corrigendum : supply of flood light led 50w input voltage range 145v-270v with cut off below 120v, 50 hz, ip66 , conforming to is 104322 part 5/section 5/ 2012 & is: 16107 (part 2/sec 1 2012, photobological safety of leds as per is 16108/2012, type b led luminaire as per is 16107 (part 2/sec 1) type 3 led module as per is 16103 part-2/2012, efficacy>100lm per watt, pf>0.95, driver efficacy>85, thd<10, led chip efficacy>130 lm/watt color temperature 6000k, cri>70, beam angle>120, heat sink-aluminium die cast with syfficient fins ti dissiple heat junction temperature<85 degree centigrade , operating temperature- 20 degree c to 50 degree c, 10% to 95% rh. all protection like - short circuit protection, over load protection , over voltage protection, reverse polarity , ir>100m ohm, protection against surge and transients>5kv internal and >10kv for external.the luminaire casing shall be die casted aluminium alloy with higher thermal conductivity corrossion, resistance epoxy powder coated , stainless steel fastner, led make osram/ nichia/ cre/philips/syska/samsung with lm 79, emi/emc compliance system lm 80 & tm 21 reports from accredited labnabi/ilac, dc/ac controlled gear as per is:15885(part2/section 1) 2012, bis safety for led luminaire as per is:10322(part 5) 2012, hsn code: 94054090 make- havells/bajaj/crompton/philips. [ warranty period: 48 months after the date of delivery ] ]
Tender For supply of flood light led 50w input voltage range 145v-270v with cut off below 120v, 50 hz, ip66 , conforming to is 104322 part 5/section 5/ 2012 & is: 16107 (part 2/sec 1 2012, photobological safety of leds as per is 16108/2012, type b led luminaire as per is 16107 (part 2/sec 1) type 3 led module as per is 16103 part-2/2012, efficacy>100lm per watt, pf>0.95, driver efficacy>85, thd<10, led chip efficacy>130 lm/watt color temperature 6000k, cri>70, beam angle>120, heat sink-aluminium die cast with syfficient fins ti dissiple heat junction temperature<85 degree centigrade , operating temperature- 20 degree c to 50 degree c, 10% to 95% rh. all protection like - short circuit protection, over load protection , over voltage protection, reverse polarity , ir>100m ohm, protection against surge and transients>5kv internal and >10kv for external.the luminaire casing shall be die casted aluminium alloy with higher thermal conductivity corrossion, resistance epoxy powder coated , stainless steel fastner, led make osram/ nichia/ cre/philips/syska/samsung with lm 79, emi/emc compliance system lm 80 & tm 21 reports from accredited labnabi/ilac, dc/ac controlled gear as per is:15885(part2/section 1) 2012, bis safety for led luminaire as per is:10322(part 5) 2012, hsn code: 94054090 make- havells/bajaj/crompton/philips. [ warranty period: 48 months after the date of delivery ] ]
Tender For supply of secondary brake beam for bmbs suitable to the "knorr bremse make" brake system conforming to rdso spec no. wd-23-bmbs-2008, rev. 1 with amend.1 of sept 2016 to rdso drg no : wd-08093-s/2, item-2, alt : 3. [ warranty period: 36 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of overhauling kit for poh of casnub bogie having kbi make bmbs system confirming rdso spec. no. wd-23-bmbs-2008 rev-1 of amend 1 of sept. 2016 and drg. no. wd-08093-s-02, alt. 3 (one kit contains following 15 items) 1). pin: kbi part no. c162088 =4 nos, 2).pin: kbi part no. c162086 =4 nos,3). pin: kbi part no. c162087 =4 nos, 4). pin: kbi part no. 778111 =4 nos 5). pin kbi part no. 778112 =8 nos, 6). washer: kbi part no. 778084 =4 nos, 7). washer: kbi part no. c162641 =8 nos, 8). washer: kbi part no. c162060 =4 nos, 9). dowel sleeve kbi part no. c140446 =4 nos, 10). bush kbi part no. c140445 =4 nos, 11). split pin with washer: kbi part no. 476858 =16 nos, 12). bulb cotter: kbi part no. c162098 =12 nos, 13). apd for push rod suitable for kbi make bmbs =4 nos, 14). apd for primary and secondary brake beam suitable for kbi make bmbs = 8 nos. 15). anti drop plate (z-apd) as per drawing no. kp1981443=4 nos. accepted description: - overhauling kit for poh of casnub bogie "suitable for knorr design bmbs" confirming to rdso spec.no. wd-23-bmbs-2008 rev-1 of amend 1 of sept. 2016 and rdso drg. no. wd-08093-s-02, alt. 3 (one kit contains following 15 items) [ warranty period: 30 months after the date of delivery ] ]
Tender For corrigendum : supply of set of apd for escort make bmbs system as per attached drg no. bknws/2023/02 , 1 set consist offollowing items 1. apd for brake cylinder= 1 nos , 2. apd for bell crank and push rod=2 nos, 3. apd for pin bell crank lever= 1 nos, 4 apd for pin push rod and secondary beam=2 nos, 5 apd for brake head pin with split pin=4 nos [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of e-beam irradiated single core stranded cable with copper conductors of size 1.5 sq.mm conforming to rdso specification no.elrs/spec/elc/0019 (rev.4) of february 2018 .( note :color of the cable shall be supplied in red and black in equal quantities) for fsds system. [ warranty period: 30 months after the date of delivery ]