Latest spot cooler Tenders | Government spot cooler Tenders

Central Government / Public Sector

CTN :44924432

18 May, 2026 NA

Vadodara - Gujarat

Tender For corrigendum : supply of complete tube bundle, tag: 721-e-05b , tube bundle, tag: 05-ee-08a/b , lube oil cooler & twin water cooler

Central Government/Public Sector

CTN :45125921

18 May, 2026 NA

Mumbai - Maharashtra

Tender For auction sale of rolling stock - condemned diesel loco no. 36157 wds/6 with iron steel and non-ferrous. restricted items: 1. complete bogie frame with wheel set, axel box and gear case = 01 nos., 2. 03 nos. of wheel sets with axel boxes without gear case = 01 nos. removed items: 1. pneumatic valve and air dryer = 01 nos., 2. radiator core = 01 nos., 3. came shaft = 01 nos., 4. extension shaft = 01 nos., 5. lube oil junction 01 and junction pipe 02 = 01 nos., 6. lube oil cooler pipe = 01 nos., 7. lube oil strainer, bottom pipe and cock = 01 nos., 8. steel balo and upper rode lower = 01 nos., 9. water tank = 01 nos., 10. fuel primary filter body and secondary filter body = 01 nos., 11. sensor loader balo = 01 nos., 12. tsc foundation plate = 01 nos., 13. bubble collector pipe ( z pipe, c pipe) = 01 nos., 14. water temperature gauge, pipe = 01 nos. 15. traction motor = 06 nos. remark: 1. restricted items to be returned to the stock holder in good condition by the purchaser at the time of delivery. 2. lot no. is painted on loco. 3. approach road is available up to lot. 4. hsd oil and lubricants if found to be returned to the stock holder. 5. locos are presently stabled at diesel shed kurla. after auction and before handing over, loco will be placed at cla yard for cutting and delivery purpose. purchaser is advised that loco will be placed only after certification of line by sse/pway/mnkd and as advised by sse/d/cla. 6. after purchaser submit all the documents and d.o after auction to dme/d/cla office, sse/d/cla in consultation with sse/p.way/mnkd will decide the date of placement of loco at cutting yard and only after handing over of loco will be done. 6. purchaser has to ensure safety of railway asset and his labour while working in railway premises. if any losses arise due to negligence, the purchaser will be fully responsible. 7. purchaser has to personally visit the site and see the lot. no claim will be entertained after sale of lot. 9. purchaser has to keep enough water/sand at the cutting site. 10.lot is ok for sale. qty : 01 number. location: presently stabled at diesel loco shed kurla. stock holder: dme d cla .

Central Government / Public Sector

CTN :45016893

11 May, 2026 NA

Bhojpur - Bihar

Tender For corrigendum : supply of critical spares of air compressors/ proprietary items by oem authorized dealer - lube oil filter, element of air suction filter, aos element, gasket for aos, k-smart (20 litre), coupling element / rubber coupling, air end supply, installation, gasket air end delivery, kit intake valve., servo cylinder kit, kit mpvl, set of o ring, hose pipe set for screw air compressor, combi-cooler assembly

Central Government/Public Sector

CTN :45110709

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,erclips,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: a row bin 1 & 2

Central Government And Public Sector

CTN :39538738

14 May, 2026 NA

Chittorgarh - Rajasthan

Tender For corrigendum : supply of spare parts of fire water diesel engine - rubber hose compressor outlet k24 turbo , hose for air cleaner , alternator 24v , bracket for alternator , set of joints 6sl9088t engine , banjo bolt m12x15 , copper washer 22x27 , adaptor m24x1 5m m10x15f , crank pulley 3 grooves 210 pcd , crank pulley finish , cylinder head bolt long , cylinder head bolt short , straight thr socket , copper washer 14x18 , cylinder head sub assembly , push rod assembly , cylinder liner assembly , dipstick assembly , teflon oil seal few , starter ring , fuel pipe feed pump to fuel filter , assly leak off pipe , high press pipe assembly , fuel pump , lube oil supply pipecrank case to fuel pump , special banjo boltlo supply to pump , copper washer 10x14 , feed pump , oil spray nozzle assembly 250 kva , assembly of lube oil filter header , centrifuge filter , lube oil pump , piston assembly , tappet , connecting rod assembly , lube oil cooler plate type , oil filler cap , rocker cover , sealing washer , joint rocker cover , rocker support assembly , oil supply pipe assembly , stop solenoid 24v energ run , suction tube , v belt avx 13 x 1562 l , hose turbocharger air outlet , joint for oil return pipe turbocharger non asbestos , water pump sub assembly , pipe , oil supply pipe sub assembly for t c , vent pipe sub assembly , banjo bolt hollow bolt , banjo bolt m14x15 , turbocharger , crankcase assembly , exhaust manifold , compression , exhaust , s i t c charges , kirloskar care super genuine oil 13 liters can , kirloskar care super genuine oil 5 liters can , spin on lube oil filter , fuel filter kit 11 ltr , v belt avx13 x 1015 length , v belt avx 13 x 1562 l , fuel pipe 80 14 b 1000 wb , air cleaner assembly dry 115 , hose radiator inlet 50 id , hose radiator outlet 60 id , hose clip , hose thermostat hsg to int pipe , hose t bolt clamp

Central Government / Public Sector

CTN :45084416

21 May, 2026 NA

Guntakal - Andhra Pradesh

Tender For auction sale of others - mixed scrap - 80.000 mt- delivery on actual weighment basis only. lot no. 5321 25 04 61 gtl gtl mixed ap available with sse dsl gtl scrap cond. u/s beyond use mixed ferrous scrap (ms & ci). released assorted scrap consisting of 50 items: (1) cattle guard (2) cylinder heads (3) tm end shield (4) outer end liner bearing caps (5) knuckle (6) cbc (7) draft gears (8) side buffers (9) equalizing beams (10) compressor liners (11) compressor housing (12) water pump (13) lube oil pump (14) brake adjusters (15) screw coupling (16) gear cases (17) compressor heads (18) extension shafts (19) cam gears (20) extension gears (21) pulleys (22) cam shafts (23) sucs (24) pull rods (25) system pipe liners (26) cattle guard supporters (27) axle box distance pieces (28) horn box liners (29) brake hangers (30) fttm, rttm blowers (31) intermediate casings (32) after cooler housing (33) m6 turbo support (34) axle box covers and plates (35) fip supports (36) ms plates & angulars (37) carbody filters (38) ecc guards (39) cylinder head valves (40) push rods (41) derators (42) fasteners of different sizes of locomotive (43) ms plates (44) focus lights housing (45) other scrap items related to loco assorted scrap (46) centrifuge base (47) fuel oil headers (48) valve lever assembly (49) main bearing shells (50) connecting rods total qty: 80.000 mts (approx) as per ds-8. available at ferrous scrap yard , diesel loco shed, guntakal. ds-8 no: 053211050 dt.13.02.26. hsn code: 720429 - gst 18%. note to the bidders 1) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.2) post auction no representation shall be entertained.3) for photos of this lot, kindly click on view lot image on bottom left side. 4) gas/chisel cutting is permitted, if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc. witnessing officials to ensure that the lot is delivered as per lot description 5) in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 6) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 7) clubbing of the lots, what so ever, is not permitted for loading 8) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. no representative should be sent to the office of sr. dmm/gtl for collection of delivery fixation letter. as soon as the balance sale value is received by railways online, delivery order will be issued immediately, to facilitate the purchaser to raise an online request for fixation of delivery point. 9) railways does not guarantee for quality, quantity description etc.

State Government

CTN :44883821

19 May, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : supply of tubes and work of insitu retubing as per atc d d - aluminium brass seamless cold drawn tubes , end plate having size of o.d. 267mm, thickness 16.5mm, 190nos. of holes and material s.s. 304 for lube oil cooler of bfp unitunit no. 3 and 4 gtps. , end plate having size of o.d. 205mm, thickness 32mm, 190nos. of holes and material s.s. 304 for lube oil cooler of bfp unitunit no. 3 and 4 gtps. , end plate having size of o.d. 330mm, thickness 25mm, 320nos. of holes and material s.s. 304 for working oil cooler of bfp unitunit no. 3 and 4 gtps. , end plate having size of o.d. 260mm, thickness 40mm, 320nos. of holes and material s.s. 304 for working oil cooler of bfp unitunit no. 3 and 4 gtps. , baffles having size of o.d. 205mm, thickness 04mm both end chamfer and material s.s. 304 for lube oil cooler of bfp unitunit no. 3 and 4 gtps. , 01set equals to 25nos. , baffles having size of o.d. 260mm, thickness 04mm both end chamfer and material s.s. 304 for working oil cooler of bfp unitunit no. 3 and 4 gtps. , 01set equals to 19nos. , work of complete in situ re tubing of old damaged tube cooler of lube oil cooler of 210mw unit no. 3 and 4 as per atc , work of complete in situ re tubing of old damaged tube cooler of working oil cooler of 210mw unit no. 3 and 4 as per atc ) /bid number : gem/2026/b/7336822 * /dated: 14-04-2026 & & / bid document 1 / 12

corporations/Associations/Others

CTN :45063999

23 May, 2026 NA

Cuddalore - Tamil Nadu

Tender For supply of lube oil cooler for compressor model nh-190

Central Government/Public Sector

CTN :45054955

11 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot non ferrous scrap - p. l. no. 98210427 condemned and unserviceabe lube oil cooler cores of emd / hhp locos with brass tubes, aluminium fins and ferrous header plates, with / without side cover plates. as is where is basis. total weight- 1270 kgs approximately for 9 nos.rate per number should be quoted. delivery should be given in numbers only .note:- loading by crane is permitted.

Central Government And Public Sector

CTN :45050285

25 May, 2026 NA

Cuttack - Odisha

Tender For supply of gasket..tube to lube oil cooler to dlw pt. no.17270236 as per drg.no. emd pt no.9570710 [ warranty period: 30 months after the date of delivery ]

Spot Cooler Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors