Latest spraying service Tenders | Government spraying service Tenders

State Government

CTN :39958527

30 Apr, 2025 96.83 Lacs

Nadia - West Bengal

Tender For repair and renovation with face lifting work of saktinager district hospital building at saktinagar district hospital campus in the district of nadia under the jurisdiction of nadia construction division p.w.d. during the year 2023-2024

CTN :40023747

23 Apr, 2025 6.13 Lacs

Multi City - Karnataka

Tender For supply of materials for the constrcution of sanjivini shed in kallenahalli gp, ajjampura taluk, chikkamagaluru work under mgnregs scheme - broken stone aggregate 40 mm size(kall), broken stone aggregate 20 mm size(kall), broken stone aggregate 12 mm to 10 mm size(kall), coarse sand (zone iii)(kall), portland cement(kall), mixer (concrete) - 1 cum capacity(kall), add watering charges at 1 % on material(kall), formwork, centering & scaffolding for columns & piers(kall), plasticizer / super plasticizer(kall), hom of vibrator 0.71 days(kall), size stone 20 x 20 x 25 cms(kall), bond stone 20 x 20 x 45 cm(kall), boulders(kall), mixer (concrete small used in culvert)(kall), jungle wood runners and planks(kall), silver oak or equivalent planks 38 mm thick(kall), casurina poles 100 - 150 mm(kall), add handling , loading and unloading at 2% on material(kall), add watering charges at 1 % on labour(kall), burnt bricks class 35 (non modular)(kall), add handling , loading and unloading at 1% on material(kall), solid concrete block (40x15x20 cms)- 5.00 n/sqmm(kall), mason class i (with tools)(kall), casurina poles 75 - 100 mm dia(kall), tmt bars fe 500(kall), binding wire(kall), mathi/nandi wood planks for panels 25 mm thick(kall), add cutting and other wastage 5%(kall), hom of machinaries for planing(kall), unit cost as per the specification(kall), honne wood(kall), honnewood planks for panels 20 mm thick(kall), t section(kall), mullion section(kall), ms clamps(kall), handles(kall), hinges 5inch heavy duty(kall), stays(kall), tw beading for fixing glass(kall), reeded glass 2 mm thick(kall), z section(kall), fitter class i(kall), welder grade i(kall), add(kall), ready mix primer paint (ready mix red lead paint)(kall), add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint(kall), painter class i(kall), add providing and removing scaffolding at 3% on labour(kall), lime(kall), dry distemper(kall), whitening(kall), add brush, putty, glue at 5% on cost of paint(kall), distemper primer(kall), add brush, putty at 5% on cost of distemper primer(kall), water proofing cement paint(kall), add brush, putty, sand paper at 2% on cost of paint(kall), mason class ii (with tools)(kall), enamel paint(kall), add brush, putty, sand paper at 3% on cost of paint(kall), vitrified tiles 600x600 mm(kall), ceramic tiles 30 x 30 cms(kall), white cement(kall), glazed tiles 300x450(kall), border tiles 30 x 10 cms(kall), add white cement for pointing at 2% on material(kall), indian type water closet of size 580 mm of specified make with footrests(kall), s or p trap 100mm(kall), add white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material(kall), white vitreous china clay flat back wash basin size 550x400mm(kall), copper plated brass piller tap 15mm(kall), cp brass chain with plug(kall), cp brass waste 32 mm of standard pattern(kall), brass stop cock(kall), c.i. / m.s. brackets for flushing cistern(kall), lead or pvc connection pipe 32mm dia (for wash basin)(kall), licenced plumber with tools(kall), polyenthylene water storage tank of specified capacity l(kall), labour charges for lifting and placing in position and making connection at 7% on material(kall), handling loading and unloading 3% on material(kall), pvc pipe of 10kg/cum,110 mm(kall), pvc pipe of 6kg/cum,63 mm(kall), pvc pipe of 4kg/cum,75 mm(kall), add cement sand and grit 1% on material(kall), add 5% for fittings and wastage charges(kall), polythylene pipes high density 32mm external dia(kall), bib cock 20mm nominal bore(kall), cost of 6.5mm m.s. coil(kall), fabrication charges.(kall), transportation charges of materials beyond 5 km at 10%(kall), labour charges for handing errection of rcc rings etc. at 5%(kall)

corporations/Associations/Others

CTN :40024926

02 May, 2025 4.22 Crore

Bhanvad - Gujarat

Tender For bid documents for proposed sewerage network of newly developed area & replacement network, 372 nos. house service connections, 744 nos. property connections, rising main, pump house at 3 lifting pumpingstation, electro-mechanical work, with all allied work and o & m for 2 years for bhanvad nagarpalika, bhanvad, dist. - devbhumi dwarka. _ 2nd call

State Government

CTN :40028549

09 May, 2025 NA

Bhatapara - Chhattisgarh

Tender For tender for pipeline extension work, rcc road crossing and drain construction work, c.c. road construction work, stage construction work, rcc drain construction work, minor construction and repair work, water supply material purchase work, motor pump and starter purchase work, stationery material purchase work, tent material supply work, electrical material supply work, sanitation material work and motor pump lower and lifting work at various locations

State Government

CTN :40028610

19 Apr, 2025 NA

Khaperkheda - Maharashtra

Tender For biennial work contract for lifting, loading & transportation of coal mill reject from 4x210 mw (unit-1 to 4), khaperkheda tps to coal reject yard.

State Government

CTN :40031057

22 Apr, 2025 NA

Kalyan - Maharashtra

Tender For providing medicine and smoke spraying services per service for mosquito/mosquito control at group gram panchayat khoni vadavali (antarli, pagdyacha pada, mhada city, taloja crown sector 10, palava city, down town, lake shore ). tal. kalyan

State Government

CTN :39976584

21 Apr, 2025 7.59 Lacs

Howrah - West Bengal

Tender For outside and inside face lifting work of bmoh quarter (1 number in 1 building) at bagnan rural hospital, bagnan, howrah

State Government

CTN :37177123

05 May, 2025 8.41 Lacs

Tapi - Gujarat

Tender For corrigendum : rate contract for work of o/h, lifting shifting of various sizes of lt motors & mov electrical actuators installed in unit no.-6 during running of unit/ emergency / as & when available/ unit shut down period.(wt-4741 emd-6 )

CTN :39983489

24 Apr, 2025 30.00 Lacs

Balaghat - Madhya Pradesh

Tender For supply of electric control panel material for maintenance work of city filter plant intake well under water supply branch nagar palika balaghat. - electric control panels important materials:-, mccb 36 ka 400 a., spreader link assy 3 pole 400 a, mccb 36 ka 250 a., spreader link assy 3 pole 250 a, contactors (bch make), 110 a. 60kw, 95 a. 47kw, contactors (l&t make), mnx 110, mnx 95, contactors (abb make), ax 185 - 30, ax 115 - 30, ax 80 - 30, cables & wires, 95 sqmm single core copper cable, 70 sqmm single core copper cable, 185 sqmm 3.5 core alluminium armoured cable, 2.5 sqmm single core copper wire, important materials, hath thela, discharge road set, 33000 v safety hand gloves, safety materials, , , aluminium ladder ( )20 fit & 12 fit. 1-1set, , , 1. 8mm to 38mm 2-2 set, 2- 8mm to 38mm 2-2 set, 3- 16mm to 17mm 2-2 set, 18mm to 19mm 2-2 set, 24mm to 26mm 2-2 set, 4- 16mm to 17mm 2-2 set, 18mm to 19mm 2-2 set, 24mm to 26mm 2-2 set, 12 , 14 , 18 , 24 , 1.27mm to 10mm, 0.05 to 3/8 , , , , 3 , , 10 mm, 12 mm, 20 mm, 15 mm, , , , 200mmx125mm, 75h.p. , 120h.p. , 150 mm, - . .200mm 1-1 set, . .200mm 1-1 set, ( . .200mm 1-1 set, , , 500v, 400a, ryb 25-25-25 set, d.o 33kv, 11kv 2-2 set, 50mm,75mm,100mm 2-2 set, 5 mm, 3 mm, . . . 25v, . . .100v, 6309, 250 mm ms pipe, 6 4 , 5 4 , 150x75 mm c , ms 250 mm 12 , ms 250 mm 8 , 8 6 . , nrb ms 250mm, nrb ms 200mm, , . ., , , , , , 50-50-50 set, . . 4 mm, bench grinder machine(600w,3200rpm,200mm), lifting dee shackle(7 ton capacity, ss), lifting bow shackle(7 ton capacity, ss), inch m12 wire rope cable clip clamp 304 ss u bolt saddle, 12 mm m12 marine 316 ss wire rope thimbles for inch diameter, 7 ton alloy steel eye hook, 10 mm ss stainless steel wire rope, machanical measuring instruments, ss outside calipers (250 mm), ss inside calipers (250 mm), vernier calipers (ss 300 mm), tape measure ( 15 mit.), tape measure ( 5 mit.), spirit level with magnet 300 mm, stainless steel scale/ruler(24 inch/60 cm), stainless steel scale/ruler(12 inch/30 cm), stainless steel scale/ruler(6 inch/15 cm), screw pitch gauge (4 to 62 tpi 0.25 to 6.0mm), feeler gauge (0.03 to 1.0 mm), electric megger insulation tester, ac dc digital clamp multimeter, insulation tube shrink torch, special machanical tools, hydraulic bearing puller(jaw and strong back bearing puller skf make), hydraulic crimping tool (300 mm), manual chain pulley block(7 ton capacity,6 meter lenth, tin cutter with spring(350 mm), locking plier (taparia 1641-7 steel 175 mm), utility knife, cable, stripper (taparia uk-3 steel 19 mm), center punch high strength (150 mm)

CTN :39984116

22 Apr, 2025 24.00 Lacs

Hanumangarh - Rajasthan

Tender For work of providing tractor trolley with diesel driver per trolley for cleaning work and lifting debris in municipal area three tractor trolleys

Spraying Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

State Government

State Government

State Government

State Government

State Government