Latest spreader Tenders | Government spreader Tenders

Central Government/Public Sector

CTN :45473793

06 Jul, 2026 NA

Dhanbad - Jharkhand

Tender For corrigendum : supply of set of spreader sp 5250 (art no. 150.012.324) with pulling attachment set pas 02 (art no. 150.182.274), pulling chain set pcs 01 (art no. 150.582.152) & cutting tip set cts 01 (art no. 150.006.474), details as per attached specifications. make: holmatro [ warranty period: 24 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45682026

03 Aug, 2026 NA

Dhanbad - Jharkhand

Tender For corrigendum : supply of set of spreader sp 5250 (art no. 150.012.324) with pulling attachment set pas 02 (art no. 150.182.274), pulling chain set pcs 01 (art no. 150.582.152) & cutting tip set cts 01 (art no. 150.006.474), details as per attached specifications. make: holmatro [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45714895

18 Jul, 2026 NA

Pune - Maharashtra

Tender For special repairs to lt panels and connected items at pyro, pinaka, nag mixture building, magazine area and ap building in hemrl, pune - taking out old serviceable/unserviceable lt panel/capacitor panel of any description or capacity keeping aside in safe custody for schedule of credit complete all as specified and directed, supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 03 nos, (c) mccb 4p, 125 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 200/5 - 04 nos, (e) control mcb c curve, sp, 6 to 32a, 10ka, c curve - 02 nos, (f) led phase indicator (r,y & b) - 01 set. (pyro sub stn), supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (c) mccb 4p, 315 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) mccb 4p, 250 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 02 nos (e) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 800/5 - 04 nos, (e) con

State Government

CTN :45699906

02 Jul, 2026 NA

Bhusawal - Maharashtra

Tender For work contract for operation & maintenance contract for pressurized air close coal mills reject handling & conveying system in unit-6, 660mw at btps, deepnagar.

Central Government/Public Sector

CTN :45704684

17 Jul, 2026 63.18 Lacs

Ganjam - Odisha

Tender For supply of pulley for conveying system b b - head drum for belt conveyors of pulley drum diameter 550 x 700 face width as per the technical specification drawings bb 1220 , head drum for belt conveyors of pulley drum diameter 330 x 600 face width as per the technical specification drawings bb 950 , head drum for belt conveyors of pulley drum diameter 330 x 600 face width as per the technical specification drawings bb 900 , tail take up snub drum for belt conveyors of pulley drum diameter 330 x 700 face width as per the technical specification drawings bb 1220 , tail drum for belt conveyors of pulley drum diameter 273 x 600 face width as per the technical specification drawings bb 900 , drum for belt conveyors of pulley drum diameter 300 x 700 face width as per the technical specification drawings bb 1220 , head snub drum for belt conveyors of pulley drum diameter 219 x 600 face width as per the technical specification drawings bb 900 , snub drum for belt conveyors of pulley drum diameter 219 x 600 face width as per the technical specification drawings bb 900 , head drum for bucket elevator as per technical specification , head drum for bucket elevator 775 800 mm dia x 530 mm wide x 12 mm thick shell and rubber lagging with diamond grooves , shore a, shaft en 8 dia 110 mm at bearing side , head drum for bucket elevator 605 630 mm dia x 380 mm wide x 12 mm thick shell and rubber lagging with diamond grooves , , shore a, shaft en 8 dia 100 mm at bearing side. , head drum for bucket elevator 605 630 mm dia x 430 mm wide x 12 mm thick shell and rubber lagging with diamond grooves , shore a, shaft en 8 dia 110 mm at bearing side. , head drum for bucket elevator 605 630 mm dia x 380 mm wide x 12 mm thick shell and rubber lagging with diamond grooves , shore a, shaft en 8 dia 80 mm at bearing side. , tail drum for bucket elevator 650 700 mm crown x 530 mm wide x 10 mm thick shell with dia 25 bar crown type.shaft en 8 dia 90 mm at bearing side. , tail drum for bucket elevator 650 700 mm crown x 530 mm wide x 10 mm thick shell with dia 25 bar crown type.shaft en 8 dia 75 mm at bearing side. , drum for bucket elevator 505 550 mm crown x 380 mm wide x 10 mm thick shell with dia 25 bar crown type.shaft en 8 dia 65 mm at bearing side. , drum for bucket elevator 505 550 mm crown x 430 mm wide x 10 mm thick shell with dia 25 bar crown type.shaft en 8 dia 90 mm at bearing side. , drum for bucket elevator 505 550 mm crown x 430 mm wide x 10 mm thick shell with dia 25 bar crown type.shaft en 8 dia 80 mm at bearing side. , drum for bucket elevator 505 560 mm crown x 380 mm wide x 10 mm thick shell with dia 25 bar crown type.shaft en 8 dia 75 mm at bearing side. , drum for bucket elevator 505 560 mm crown x 380 mm wide x 10 mm thick shell with dia 25 bar crown type.shaft en 8 dia 80 mm at bearing side.

Central Government / Public Sector

CTN :45718095

20 Jul, 2026 NA

Murshidabad - West Bengal

Tender For supply of testubes , erlenmeyer flask , beaker , tissue roll , oven gloves , float rack , tubular glass spreader , zip lock pouch , cork borer , cover glass , microslides , petridish , laboratory stretch film , reagent bottles , micropippette , micropipette tips 1000 , micro pipette tips 200 , micropipette tips 10 , brown paper bags , cotton wool , sterelising solution , biohazard autoclavable bags , laboratory tissue roll , rubber bands , neem oil , sanjevni , bioharz , nematofree plus , bio nata , myco t , myco nematocure

corporations/Associations/Others

CTN :45478586

06 Jul, 2026 NA

Cuddalore - Tamil Nadu

Tender For corrigendum : providing of repair and overhauling service - specialized mining equipment; man spreader-1; no; buyer premises

State Government

CTN :45370350

30 Jun, 2026 NA

Cuttack - Odisha

Tender For corrigendum : supply of hydraulic spreader

CTN :45671759

01 Jul, 2026 55.80 Lacs

Bhiwandi - Maharashtra

Tender For providing and supplying spare parts for all type of borewell as per requirement in b.n.c.m.c. area 2026-2027 - providing and supplying spare parts for all type of borewell as per requirment in bncmc area 2026-2027, :item no. 1 : providing and laying in trenches following mm dia. medium grade having embossed as isi mark galvanised iron pipes ?of kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete. pwd ssr 2022-2023 pg no 268 41.20,41.21 25 mm dia, 32mm dia, item no. 2 : providing and supplying blue mdpe pipes conforming to iso 4427:1996 manufactured from virgin resin pe 80 food grade compounded raw material having blue colour only with quality assurance certificate from quality agencies like wrc / cipet (india) / dvgm / kiwa / spgn etc. for usage in drinking water system. the cost shall include testing of all materials, inspection charges, transportation up to store, transit insurance, loading, as specified and directed, unloading,stacking excluding gst levied by goi & gom in all respect, etc. complete as specified and directed.mjp dsr 2023-24 pg no 128/1/b 25 mm dia, 50 mm dia, item no 3 providing, erecting and giving test of centrifugal monoblock pump set conforming to is 9079 operating at 2900 rpm with ci impeller, priming funnel, cock, suitable flanges at suction and delivery side. pump shall have common shaft for pump and motor. motor shall be suitable for working on 415 v 10%, 3 ph, 50 hz a.c. supply. motor shall be tefc type. pump set shall be suitable for working at various discharge and head requirements. pump shall be erected on provided c.c. foundation block with suitable foundation bolts grouted in c.c. foundation block.centrifugal monoblock pump set (single stage) mjp mech.csr 2023-24 pg no 5 pm 2-1-5] 10 hp, item no 4 : supplying and erecting submersible pump 150 mm dia (with bronze / stainless steel (cf8m) impeller) up to 8 stages mjp mech.csr 2023-24 pg no 01 pm 1-2-1,pm 1-2-2] 1.5 hp, 2.0 hp, item no 5 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.75 kw/ 1 h.p., with discharge of 480 to 13 lpm for 10 to 50 mtrhead & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications pwd ele csr 2022-2023 pg no 206 12-6-2, item no 6 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.375 kw/ 0.5 h.p., with discharge of 120 to 12 lpm for 10 to 40mtr head & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications. pwd ele csr 2022-2023 pg no 206 12-6-1, item no. 7 supplying & erecting automatic control panel for 1 ph, 230 volt, a.c. submersible/centrifugal pump set up to 3 hp consisting of dol starter of suitable relay range s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. pwd ele csr 2022-2023 pg no 220 12-4-20, item no.8 supplying & erecting automatic control panel for 3 phase , 415 volt, a.c, submersible/centrifugal pump set up to 7.5 hp consisting of dol starter having relay range 9-14 amp,s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. control panel should offer single phasing, phase reversal, phase imbalance etc .pwd ele csr 2022-2023 pg no 204 12-4-17, item no. 9 supplying and erecting d.o.l. starter 400v. 3 phase, 50cycles with no volt coil and overload element with necessarymaterials and connected to supply for 10 h.p., item no 10 supplying & erecting flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.pwd ele csr 2022-2023 pg no 220 12-4-8, item no. 11 supplying, erecting & terminatin

Central Government/Public Sector

CTN :45675811

07 Jul, 2026 12.24 Lacs

Delhi - Delhi

Tender For supply of various type of spreader valve block/manifold for concor owned sany/kone make rsts at terminals of area-ii

Spreader Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors