Latest spring cord Tenders | Government spring cord Tenders

Corporations And Associations And Others

CTN :41810886

17 Sep, 2025 NA

Delhi - Delhi

Tender For supply of sanitary item/ plumbing material for day to day maintenance of pt/ct in ac-57 and ac-58 for mega swachhata abhiyan in delhi under the jurisdiction of ee(m)-iv/ssz - laying and jointing pvc pipe. heading, supplying of ptmt urinal cock 15mm dia at mcd store, supplying of ptmt bib cock with nozzel 15mm at mcd store., supplying of ptmt stop cock (concealed) 15mm at mcd store., supplying of 15mm nominal bore and 30 cm length p.v.c. connection pipe with with ptmt nuts at mcd store., suppling of flushing cistern pvc 10 liter capacity (low level white with fitting ,accessories and flush pipe ) at mcd store., supplying of ptmt -tower bolt 152x42x18mm at mcd store ., supplying of enamel paint at mcd store., supplying of cpvc pipe 15 mm dia at mcd store., supplying of vitreous china orrisa type w.c pan size 580 at mcd store., supplying of vitreous china pedestal type water closet at mcd store., supplyinh of white vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350mm with waste fitting as per is:2556 at mcd store, suppying vitreous china angle back wash basin 630x450 mm at mcd store., supplying of ptmt pillar cock (fancy)15mm flow at mcd store, supplying of ptmt -urinal spreader b15mm at mcd store, suppying of polyethylene water storage tank with cover and suitable locking arrangement at mcd store ., supplying of c.p.brass angle valve 15mm at mcd store, supplying of 20mm dia ptmt stop cock at mcd store

Central Government/Public Sector

CTN :41770500

30 Sep, 2025 1.57 Crore

Amritsar - Punjab

Tender For supply of periodical repair maintenance and operation of power supply , operation and maintenance of roof top solar plant , repair of earth pits , supply of transformer oil , dehydration and filtration of transformer oil , provision of silica gel , service charges for locating pin pointing of fault in lt cable , service charges for locating pin pointing of fault in ht cable , supplying and making indoor cable end termination 35 sq mm , supplying and making indoor cable end termination 185 sq mm , supplying and making straight through cable jointing 35 sq mm , supplying and making straight through cable jointing 185 sq mm , servicing checking and testing of lt circuit breakers upto 1600 amps , servicing checking and testing of lt circuit breakers above 1600 amps and upto 3200 amps , servicing checking and testing of 11 kv ht circuit breakers upto 800 amps biecco lawrie make , servicing checking and testing of 11 kv ht circuit breakers 630 amp rmu with sf6 insulating medium , supply of the following spares jaw contacts 1 set upto 1600 a , supply of the following spares pole assembly include 1 fixed contact upto 1600a , supply of the following spares jaw contacts 1 set above 1600 a and upto 3200 a , supply of the following spares pole assembly above 1600 amps and upto 3200 amps , inspection servicing testing and calibration of idmt relays , inspection servicing testing and calibration of idmt relay , inspection servicing testing and calibration of protection relays , inspection servicing testing and calibration of digital protection relays , transformer oil leakage repair of lv side of transformer upto 500 kva , transformer oil leakage repair of lv side of transformer above 500 kva upto 2000 kva , servicing checking and testing of the following 250 kva servo for mssr , complete item of cpwd schedule of rates electrical 2022 ) /bid number : gem/2025/b/6662944 * /dated: 09-09-2025 & & / bid document 1 / 23

CTN :41503290

13 Sep, 2025 NA

Jaisalmer - Rajasthan

Tender For bid to ras supply of electrical items c c - ml for flame proof point wiring with two single core frls h pvc insulated pvc unsheathed multi stranded copper conductor cable of size 1 point 5 sqmm 1100v , supply install testing of flame proof metallic body exhaust fan single phase 230v 50hz 300mm 1440 rpm with louvers and shutter including civil work , ml switch flame proof rotory type with termination box in lm 6 16 a single phase 250v complete all as specified and directed by engr in charge , supply and fixing db spn 4 way db including all fixing accessories complete all as specified and directed by engr in charge , supply and fixing mcb sp 6 to 32 amps 240v rupturing capacity 10 ka c series complete all as specified , supply and fixing mcb db 20 amps 240v breking capacity 10 ka complete all as specified , ml for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick surrounded with charcoal and salt buried directly in ground , ml for submain wiring with 2 single core pvc insulated unsheathed multi stranded copper conductor frls wire 4 sqmm 1100v grade incl one 4 sq mm pvc insulated , supply lay jointing testing xlpe insulated lt under ground cable 1100v grade heavy duty armoured with multi stranded aluminium conductor laid in trenches ducts , excavation in trenches n exc 1 point 5m wide and n exc 1 point 5m in depth for foundation etc or for shafts wells cesspits manholes pier holes laying of cables etc , ml for tibba sand cushioning to under ground cable in trenches existing cable trenches ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying , ml for 40 to 50 mm thick rough dressed jodhpur type stone slab 25 to 35 cm in width of 80 cm long laid dry abutting each other for protection to under ground cable , ml for removing excavated material to a distance n exc 50m and depositing where directed at a level n exc 1 point 5m above the ) /bid number : gem/2025/b/6562017 * /dated: 20-08-2025 & & / bid document 1 / 20 & & ' ' /item category starting point complete , ml for returning, filling in including spreading leveling watering and well ramming in layers not exc 25 cm complete all as specified and as directed , ml for gi tubes in replacement of 32mm bore size light grade galvanised including fittings with clamp of 25x3 flat iron welded to pipe fixed to wall , supply install testing or commissioning of inverter tech split wall mounted ac indoor outdoor unit with cordless remote control cap 1 point 5 tr make lg blue star hitachi voltas lyod , supply fixing heavy duty copper pipe 12mm 1 oblique 2 inch dia bore thickness 0 point 70 mm complete incl brazing welding nuts bolts and screws , supply fixing heavy duty copper pipe 6mm 1 oblique 4 inch dia bore thickness 0 point 70 mm complete inclu brazing welding nuts bolts and screws , supply and fixing new nityrile rubber insulation for copper pipes suitable for split ac of capacity from 1 point 5 to 2 tr complete all as directed by engg in charge , supply fixing in replacement wall mounted digital voltage stabilizer for automatic operation single phase naturally air cooled indoor type designed for input variation between 150 to 285v , sf sheet metal enclosure 2 pin earth plug socket complete with one single pole mcb of 20 amp capacity complete all as specified and directed by engr in charge , sf wiring from indoor to outdoor unit size 2 point 50sqmm pvc insulated multistranded frls 4 core round cable incl fixing of thimbles for split type air conditioner 1 point 5 to 2 tr , m l for surface sub main wiring with two runs of 4sqmm single core pvc insulated unsheathed multistranded with copper conductor cable 1100v frls h grade isi marked , supply fixing new pvc drain pipe 15 mm dia with coupler joint for split or window ac complete all as specified as directed , supply fixing in replacement outdoor unit odu stand for 1 point 5 or 2 tr type split ac complete all as specified as directed

Central Government / Public Sector

CTN :41766020

30 Sep, 2025 NA

Guntakal - Andhra Pradesh

Tender For supply of sub item id no.3100332001:- thermo shrinkable jointing kit (tsf-4) suitable for 4/6 quad underground cable 0.9mm dia conductor model no. tsf-4 as per rdso spec no. irs tc- 77/2012 (rev.3) with amendment no. 1 to 3 or latest.

Central Government/Public Sector

CTN :41734943

27 Sep, 2025 38.54 Lacs

Lucknow - Uttar Pradesh

Tender For provision of lt cable, lt panel and connected items at trg area of 01 assam under ge e/m lucknow - excavation in trenches in soft/loose soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide and getting out complete all as specified and as directed by the engineer-in-charge., returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick using excavated soil complete all as specified and as directed., removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed., material and labour for dry river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading, levelling & punning complete as specified and directed .note :- punned thickness (18 cm) shall only be considered for payment., m&l for laying of fly ash brick designation 100 kg / sqcm, using old size bricks confirming to is 12894, laid flat with width equal to length of brick, laid dry over electric cable for protection complete all as specified & directed by engr-in-charge., deployment of tools & manpower for boring /drilling (horizontly) manually / mechanically under existing road max 10 m in width) suitable for passing pipe of any descreption of dia 40 to 100 mm complete all as specified and directed by engineer in charge, supply, laying jointing and testing lt ug cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured is 7098 marked, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core, laid in trench / laid under floor or fixed naked with wall / on wall / in ducts / in gi pipes etc. with and includings ms clamps, nuts, bolts, washers complete all as specified and directed. note- excation, earth works,and sand cushioning, protection bricks and pipe shall be measured and paid seprately under given items., all as per item no 07 above but lt under ground cable of size 95 sqmm 3.5 core, all as per item no 07 above but lt under ground cable of size 70 sqmm 3.5 core, all as per item no 07 above but lt under ground cable of size 50 sqmm 3.5 core, all as per item no 07 above but lt under ground cable of size 16 sqmm 4 core, s&f cable jointing kit for 1100 v (earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 25 to 50 sqmm xlpe armoured aluminium conductor ., s&f cable jointing kit for 1100 v (earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 70 to 95 sqmm xlpe armoured aluminium conductor, m&l for 80 mm bore mild steel galvanised water tubing, light grade with all fittings and fixed to walls or laid on floors / fixed to poles / or passing under road crossing, for protection of ug cable complete all as specified and directed by engr-in-charge. , m&l for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly and vertically in ground with top edge of the plate not less than 2.25 mtr from gl, connected with galvanised iron strip 32 x 6 mm, all as shown in plate no-3, of ssr, connected to the earthing test point, concrete pit in pcc 1:3:6 type c-2with rcc precast pit cover slab 400 mm x 400 mm x 50 mm with handle for lifting made out of 8 mm dia ms rod, funnel, wiremesh, 50 mm dia light grade gi tubing for protection of gi strip 32 x 6 mm, charcoal and salt in alternate 150 mm thick layers around gi earth plate, including necessary returning filling in & removal all as specified or indicated in ssr part-i, including testing to achieve earth resistance value as per is specification on completion, supply, installing, testing and commissioning factory made, cpri approved, confirming to is-5039, overall powder coated, lt p

corporations/Associations/Others

CTN :40098583

09 Sep, 2025 27.19 Lacs

Puruliya - West Bengal

Tender For bid to ras bid to ras bid to ras supply of consumables gasket jointing sheet and rubber item - graphited ,compressed asbestos fibre jointing sheet to withstand temp. 380 degree c and pressure 35kgby cm square , jointing sheet non asbestos non metallic -champion style af-159byspitmaan style af- 159byuni klinger style ci-22byjames walker style na-259 or equivalent of any other make, size-2000 x 1500 x 0.5 mm , gasket non- metallic compressed -non asbestos , temperature 380 degree centigrade, pressure 35 kgbycm sq, fiber jointing sheet. size-1525x1650x0.75by0.8 mm , jointing sheets for water non-metallic compressed -non asbestos , max temp. 380 deg cent., max. pressure 35 kgbycmsq, size 6.0 mm x 1525 mm x5000 mm , champion style -54 super non-metallic or equivalent compressed asbestos fibre jointing sheet to withstand temperature 550 deg. c , , jointing sheet non asbestos non metallic - champion style af-159byspitmaan style af-159byuni klinger style ci-22byjames walker style na-259 or equivalent of any other make, size-2000 x 1500 x 2.0 mm , jointing sheet non asbestos non metallic -champion style af-159byspitmaan style af-159byuni klinger style ci- 22byjames walker style na-259 or equivalent of any other make, size-2000 x 1500 x 0.8 mm , jointing sheet non asbestos non metallic -champion style af- 120byspitmaan style af-120byuni klinger style ci- 18byjames walker style na-220 or equivalent of any other make, size-2000 x 1500 x 3.0 mm , steam jointing sheet, champion style-54super metallic, thickness 3mm , champion style 54 super non-metalic colour yellow or graphited ,compressed asbestos fibre jointing sheet to withstand temp. 550 degree c and pressure 150kgby cm square , champion brand style-59 oil caf jointing sheet to withstand temp. 550 deg c,pressure 150 kgbycm2,conforming to is 2712by1998,gra , champion style 59 oil non-metalic colour dark grey or graphited ,compressed asbestos fibre jointing sheet to withstand temp. 550 degree c and pressure 150kgb , champion style 59 super oil dark grey non metallic compressed asbestos fibre jointing sheets for superheated high pressure steam conforming to is 2712-1998 gr , non asbestos thermal insulation webbing tape 3mm x 50mm withstand temperature 500 degree c , jointing sheet non asbestos non metallic, working pressure - 200 kgbycm squre or above, working temp.- 550degreec or above, size- 1500 x 2000 mm or 1000 x 1000 mm, thickness- 3 mm. suitable for steam. , jointing sheet non asbestos metallic reinforced with metallic wire mesh , working pressure - 200 kgbycm squre or above, working temp.- , jointing sheet non asbestos, non metallic, working pressure - 70 kgbycm squre or above, working temp.- 300degreec or above, size- 1500mm x 2000 mmx 4mm. , jointing sheet non asbestos non metallic, working pressure - 150 kgbycm squre or above, working temp.- 400degreec or above, size- 1500 x 2000 mm or 1500 x 1600 mm, thickness- 2 mm. suitable for oil. , jointing sheet non asbestos non metallic - champion style af-120byspitmaan style af-120byuni klinger style ci-18byjames walker style na-220 or equivalent of any other make, size-2000 x 1500 x 1.5 mm , jointing sheet non asbestos metallic reinforced with metallic wire mesh , working pressure - 200 kgbycm squre or above, working temp.- 55 , jointing sheet non asbestos, reinforced with metallic wire mesh, working pressure - 200 kgbycm squre or above, working temp.- 540degreec or above, , jointing sheet non asbestos non metallic, working pressure - 200 kgbycm squre or above, working temp.- bid details/ 2 / 52 pressure - 200 kgbycm squre or above, working temp.- 550degreec or above, size- 1500 x 2000 mm or 1000 x 1000 m , jointing sheet non asbestos metallic reinforced with metallic wire mesh , working pressure - 200 kgbycm squre or above, working temp.- 550degreec or above, size- 1500 x 2000 mm or 1000 x 1000 mm, , jointing sheet non asbestos non metallic, working pressure - 150 kgbycm squre or above, working temp.- 400degreec or above, size- 1500

CTN :41720939

25 Sep, 2025 NA

Multi City - Multi State

Tender For supply of study of self and mutual inductance measurment trainer kit , battery charger , inverter , battery for inverter , colour coded resistances , sliding rheostats , induction coil , dc regulated power supplies , multipurpose wire stripper and cutter , combination plier insulated 8 inch , round wire gauge , voltage or line tester , voltage or line tester non contact , tape roll , rccb 40 amps 4 pole , single core wire 4 sqmm roll , single core wire 2.5 sqmm roll , single core wire 1.5 sqmm roll , single core wire 1 sqmm roll , 3 phase 4 core cable 10mm square roll , 3 phase 4 core xlpe cable 35mm square roll , display board different wires and cable , display board different switches , desert cooler , room heater , electric kettle , voltage stabilizers , digital megger , single phase power measurment kit , three phase switch fuse unit , dol starter , electric drill kit , l key set , soldering gun kit , model cut section ceiling fan , power cable jointing kit , single phase lamp load , three phase lamp load , led street light , heavy duty power extension board , pvc casing capping , flexible pvc pipe , pvc conduit pipes , motor coil winding machine , heat convector , electric oven , digital clip on meter , measuring tape , screw driver mains voltage tester , trainer board to study chopper , trainer board to study dual converter , trainer board to study cycloconverter , study of mosfet trainer kit , scr based lamp intensity control , parallel operation of alternator , dc series motor , single phase transformer , sepratly excited dc generator , tachometer , synchronous generator , rs flip flop , t flip flop , multiplexer and demultiplexer trainer kit , portable moving iron voltmeter , portable moving iron ammeter , portable wattmeter , portable standard energy meter , thermocouple trainer kit , portable frequency meter , model cut section of refrigerator , cut section model of air ) /bid number : gem/2025/b/6640554 * /dated: 05-09-2025 & & / bid document 1 / 127 & & ' ' /item category conditioner , mercury vapor lamp kit , sodium vapor lamp study kit , halogen lamp study kit , neon lamp study kit , compact fluorescent lamp cfl study kit , resistance welding machine , 8085 microprocessor trainer kit , 3 core copper cable roll , 4 core copper cable roll , 2 core aluminium cable roll , double pole mcb with box , 4 pole mcb with box , led tube lights , galvanized iron wire 100 mtr , nut bolt with washer , circle cable clip , heavy duty switch socket with gang box , thimbles , anvil 50 kg with stand , ball peen hammer 500gm , basted file 12 inch , bench type drill machine capacity 13 mm , bench vice , divider 12 inch , flat file 12 inch , flat file rough 10 inch , grinder , hand hacksaw frame , hs twist drill 5, 6.8, 8.5, 10.5, 12.5, 5 or 8, 3 or 4 , pipe vice , pipe wrench 8 inch , screw driver kit , sledge hammer 5 kg , smooth file 12 inch , square face hammer 500 gm , steel foot rule 300mm , steel foot rule 600mm , steel number punch 5mm , try square 8 inch , vernier caliper lc 0.02mm, 150mm , acetylene cylinder , acetylene pipe 15 meter , acetylene regulator with spanner , chipping hammer , circle cutting machine , edge folding machine , foot shear machine , foundry bellow , funnel stake , gaggers , gate cutters , gloves pair , hand rammer , hand stake , ladle , ladle holder , leg vice 4 inch , lifter or tong 2 in 1 , milling machine conventional , molding board , molding boxes flasks , oil fired tilting type , oxygen regulator with spanner , oxygen cylinder , oxygen pipe 15 meter , planner , pneumatic rammer , riddle , rivet set , rivet snap , round die handle , round stake , sand mix muller , scriber 8 inch , shaper , sheet steel wire gauge , shovel , single snip , slick , swab , swage block 4 inch , tap wrench 5 or 16 in 1 in , taper stake , tong 12 inch flat , trowel , welding screen , welding torch high pressure , welding torch low pressure , gear tooth vernier , sling psychrometer study of self and mutual

Central Government/Public Sector

CTN :41669684

23 Sep, 2025 NA

East Singhbhum - Jharkhand

Tender For annual repair and maintenance of 500 mm dia di pipeline from kharkai to turamdih : : - patrolling or inspection of di pipe line for checking leakage detecting from intake well cum pump house to turamdih area where pipe line exists with technical persons minimum one fitter with transport facility daily and including tightening of nuts and bolts where ever required for rectification of leakages observed during routine inspection. , attending as and when required major breakdown or rectifying leakage of di pipe line including fixing of necessary mechanical joint and all accessary within twelve hours information or notice for rectification till the resumption of the service including labour charges equipment tools and tackles but excluding cost of materials etc , overhauling charges of valves including change of gland packing if required with all labour charges for joints for following sizes of gate or sluice valve or butterfly valves for four hundred mm dia , overhauling charges of valves including change of gland packing if required with all labour charges for joints etc for following sizes of gate or sluice valve or butterfly valves for five hundred mm dia. , repairing of air valves including charges of float ball with all labour charges tools and tackles , earth work in excavation in trenches or drains including dressing saides and ramming of bottoms lift upto one point five metre including getting out the excavated soil and disposal of surplus excavated soil as directed all kinds of soil , return earth filling by available excavated earth excluding rock i trenches plinth sides of foundation etc in layers not exceeding twenty cm in depth consolidating each deposited layer by ramming allow for breading up lumes shrinkage etc watering lead upto fifty metre and lift upto one point five metre complete as directed by the eic. , clearing jungle including uprooting of rank vegetation grass bush wood trees and saplings of girth upto thirty cm measured height of one metre above ground level and removal of rubbishe upto a distance of fifty metre outside the periphery of the area cleared. , surface dressing of the ground including removing vegetation and in equalities not exceeding fifteen cm deep and disposal rubbish lead upto fifty metre and lift upto one point five metrea all kinds of soil. , supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete , providing and laying in position cement concrete of specifieda grade excluding the cost of centering and shuttering all work up to plinth level one cement isto three coarse sand six graded stone aggregate twenty mm nominal size. , rcc work below and above plinth level up to floor five level one cement isto one point five coarse sand isto three graded stone aggegate twenty mm nominal size is to be provided. , steel reinforcement for rcc work including straightening cutting bending placing in position and binding all complete. , centering and shuttering including strutting propping and removal of form for all heights. , 15mm thick cement plaster on rough side of single or half bricke wall of mix one cement isto six coarse sand to be provided. , neat cement punning , supply at site laying jointing including gasket nut bolts all complete miscellaneous di fittings like di bend mechanical joint tee gland packing all item as per is9523 for four hundred or five hundred mm dia di specials with spigot and flange combination like bend tee of class k12 suitable for push on jointing as per is9523 pipe all complete.

State Government

CTN :41672921

09 Sep, 2025 NA

Nashik - Maharashtra

Tender For procurement of various packing and sealing materials required for high-pressure valves for unit -3 aoh ntps 210 mw boilers. - seal r ing grafoi l of size 392 x 312 x 50 mm to wi thstand temperature upto560 deg. c & pressure160 kg/sq. cm, gasket & packing-pre-cut<>seal ring<>asbestos metallic<>circular<>265 x 330 x 40 mm to wi thstand temperature up to 560 deg. c & pressure160 kg/sq. cm, seal r ing grafoi l of size 200x158.4x29 mm to wi thstand temperature up to 560 deg. c & pressure 160 kg/sq. cm, seal r ing grafoi l of size 170x136x21 mm to wi thstand temperature up to 560 deg. c & pressure 160 kg/sq. cm, seal r ing grafoi l of size 150x120x20mm to wi thstand, temperature up to 560 deg. c & pressure 160 kg/ cm2, gland packing r ing size 96 x 70 x 13 mm to wi thstand, temperature up to 560 deg. c & pressure 160 kg/cm2, gland packing r ing size 64 x 44 x 10 mm to wi thstand, temperature up to 560 deg. c & pressure 160 kg/cm2, gland packing r ing size 60 x 80 x 10 mm to wi thstand, temperature up to 560 deg. c & pressure 160 kg/sq. cm, gland packing r ing size 60 x 40 x 10 mm to wi thstand temperature up to 560 deg. c & pressure 160 kg/sq. cm, gland packing r ing size 56x28x14 mm to withstand temperature up to 560 deg. c & pressure 160 kg/sq. cm, gland packing ring size 41x17x11.5 mm to withstand temperature up to 560 deg. c & pressure 160 kg/sq. cm, spiral wound metallic gasket size 64x50x5 mm to withstand temperature up to 350 deg. c & pressure 160 kg/sq.cm, spiral wound metallic gasket size60x40x5mm to withstand temperature up to 350 deg. c & pressure 160 kg/sq. cm, spiral wound metallic gasket size130x101x77x4.5 mm (77x101x4.5 spiral, 130x101x3.0 plain) to withstand temperature up to 350 deg. c & pressure 160 kg/sq. cm, metallic gland packing rope style 1916 5 mm box of 6 mtr, metallic gland packing rope style 1916 6 mm box 6 of mtr, metallic gland packing rope style 1916 8 mm box of 6 mtr, metallic gland packing rope style 1916 10 mm box of 6 mtr, metallic gland packing rope style 1916 12.5 mm box of 3 mtr, metallic jointing sheets size 1525 x 1650 mm x 2.0 mm thick to withstand temperature up to 560 deg. c & pressure 160 kg/sq. cm. unit of measure for this item is no (sheet), metallic jointing sheets size 1525 x 1650 mm x 3.0 mm thick to withstand temperatures up to 560 deg. c & pressure 160 kg/ sq. cm., unit for this item is no (sheet), nonmetallic jointing sheets size 1525 x 1650 mm x 1.0 mm thick. unit for this item is no(sheet), nonmetallic jointing sheets size 1525 x 1650 mm x 2.0 mm thick. unit for this item is no(sheet), gland packing ring size 54x34x10 mm to withstand temperature up to 560 deg. c & pressure 160 kg/sq. cm, spiral wound metallic gasket size 65x42x11.5 mm to withstand temperature up to 350 deg. c & pressure 160 kg/sq. cm, gland packing ring size 44 x 24 x 10 mm to withstand temperature up to 560 deg. c & pressure 160 kg/sq. cm, gland packing ring size 32 x 20 x 06 mm to withstand temperature up to 560 deg. c & pressure 160 kg/sq. cm, asbestos white rope style 1056 round-6mm make-champion/spitman, gasket packing material<>asbestos white<>rope<>style: 1000 round<>size: 6 mm - 5 kg pk, asbestoswhiteropestyle1000 round 8mm make-champion/spitman, gasket & packing mat<>asbestos white<>rope<>style 1000 round<>8 mm - 5 kg pk, asbestos white rope style1000 round10mm make - champion / spitman gasket & packing mat<>asbestos white<>rope<>style 1000 round<>10 mm - 5 kg pk, asbestos white rope style1000 round12mm make- champion / spi tman gasket &, packing mat<>asbestos white<>rope<>style 1000 round<>12 mm - 5 kg pk, asbestos whiterope style1000 round16mm make - champion / spi tman gasket &, packing mat<>asbestos white<>rope<>style 1000 round<>16 mm - 5 kg pk, asbestos white rope style1000 round19mm make- champion / spi tman gasket &, packing mat<>asbestos white<>rope<>style 1000 round<>19 mm - 7.5 kg pk, gskt&am

Corporations And Associations And Others

CTN :41600167

25 Sep, 2025 NA

Hisar - Haryana

Tender For supply of jointing sheets and consumables - supply of jointing sheet and consumables as per nit annexure-ia, jointing sheet metallic as per is 2712:1998 grade w/1 ,thickness: 3mm (size:2mtr x2 mtr), jointing sheet metallic as per is 2712:1998 grade w/1, size: 2.0 m x 2.0 m, thickness: 5mm, jointing sheet non metallic as per is 2712:1998 grade w/1 standard size or size: 2.0 m x 2.0 m, thickness: 5mm, jointing sheetnon- metallicthickness:3 mm, size: 2.0m x 2.0m,material:compressed asbestos fibre (caf) non-metallic,graphitedindian standard:is:2712-1998make:champion or equivalent, neoprene rubber sheet as per bs: 2752, standard size, thickness-3mm, 50%., neoprene rubber sheet as per bs: 2752, standard size, thickness-5mm, 50%., oil gasket 1.0 mm, oil gasket 2.0 mm, oil gasket 3.0 mm, gland packing rope,type non-metallic, size 25 mm,shape-square,material- graphited ptfe ,make packmann or equivalentindian standard is 4687 (1995)., ropegland packing, non-metallic,size:20 mmshape:squarematerial:expanded graphite reinforced with carbon yarnmake:pacmaan or equivalent indian standard is 4687 (1995)., glandpackingtype:non metallicsize:16 mmshape:squarematerial:graphited ptfemake:champion or equivalentindian standard:is:4687(1995)., rope gland packingsize:10mmshape:squarematerial:white graphite reinforced with stainless steel wireindian standard:is:4687make:champion or equivalent,temperature:815 , rope gland packingsize:08 mmshape:squarematerial:white graphite reinforced with stainless steel wireindian standard:is:4687make:champion or equivalent,temperature:815 , cordsize:6 mmmaterial:nitrile butadiene rubber (nbr)indian standard:is:11149, cordsize:8 mmmaterial:nitrile butadiene rubber (nbr)indian standard:is:11149, cordsize:5 mmmaterial:nitrile butadiene rubber (nbr)indian standard:is:11149, item name:wire meshmesh size:45 mm, width-2.5 metermaterial:stainless steel 304., item name:wire meshmesh size:60 mm, width-2.5 meter,material:stainless steel 304., coupling bush id-24mm, od(center)-60mm, od(corner)-50mm, height-65mm, shape-barrel, material-nbr, is:2693:1989., coupling bush id-15mm, od(center)-38mm, od(corner)-28mm, height-42mm, shape-barrel, material-nbr, is:2693:1989., coupling bush id-26mm, od(center)-45mm, od(corner)-42mm, height-32mm, shape-barrel, material-nbr, is:2693:1989., coupling bush id-53mm, od(center)-98mm, od(corner)-90mm, height-100mm, shape-barrel, material-nbr, is:2693:1989., coupling bush id-42mm, od-71mm, thicknes-17mm, shape-barrel, material-nbr, is:2693:1989., molycot 1000, application-antisieze, form of supply-paste, make-dov corning or equivalent. packing size- half kg.

Spring Cord Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors