Latest square channel Tenders | Government square channel Tenders

corporations/Associations/Others

CTN :45328177

05 Jun, 2026 62.00 Lacs

Kaushambi - Uttar Pradesh

Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on turnkey basis under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of centralised materials, 11 kv switch gear 600/300/5a 350 mva i/c, 11 kv switch gear 200/100/5a 350 mva o/g, 11 kv 3x300 mm2 xlpecable, 11 kv 3x120 mm2 xlpecable, 24 volt battery, 24 volt battery charger, pcc. 8.5 mtr. long for feeder, 11 kv tpmo switch with fixing clamp, 11 kv top channel, 11 kv dropper angle, earthing complete, stay set complete, 11 kv polymer pin insulator, 11 kv polymer disc insulator, 11 kv disc fiting, 33 kv control panel t/f, acsr weasel conductor, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as join

CTN :45332517

12 Jun, 2026 NA

Jaisalmer - Rajasthan

Tender For procurement of miscellaneous items - commissioning wall stand mounted water purifier 8 ltrs storage cap 20lph purification rate comprising ro uv uf make kent aquaguard havells , long stick broom outdoor indoor use supply of long handle broom made of natural bamboo stick with coconut fibre bristles, suitable for wet and dry sweeping in residential office and outdoor areas , s and installation 75 inch led tv ultra hd 4k neo qled mini led smart google television with hdr support wi fi connectivity and wall mounting arrangement make sony bravia 7 samsung qn90d neo , supply installation testing and commissioning 5 point 1 channel dolby digital sound system comprising soundbar wireless subwoofer and compact rear speakers with bluetooth and wi fi connectivity , water dispenser with 20 litres bottle heavy duty isi marked , supply and fixing of 4 burner lpg gas stove ss body auto ignition heavy duty isi marked , supply and fixing of electric chimney with ducting 1000 m3 per hr heavy duty isi marked , microwave oven 20 to 30 l convection heavy duty isi marked , electric oven otg 25 l heavy duty isi marked , induction cooktop 1800w heavy duty isi marked , mixer grinder 500 to 750w multi jar heavy duty isi marked , electric kettle 1 point 5 to 2 l heavy duty isi marked , pop up toaster 2 or 4 slice heavy duty isi marked , sandwich maker heavy duty isi marked , coffee maker electric heavy duty isi marked , hand blender or beater heavy duty isi marked , pressure cooker 3l 5l 7 point 5l heavy duty isi marked , ss cooking pots assorted sizes with lids heavy duty isi marked , kadai heavy gauge heavy duty isi marked , frying pans ss non stick heavy duty isi marked , tawa chapati pan heavy duty isi marked , saucepan set heavy duty isi marked , knife set 3 to 5 pcs heavy duty isi marked , chopping boards food grade heavy duty isi marked , peeler grater slicer set heavy duty isi marked , mixing bowls ss assorted heavy duty isi marked , measuring cups and spoons heavy duty isi marked , rolling board and pin heavy duty isi marked , colander or strainer heavy duty isi marked , ladles spatulas tongs heavy duty isi marked , serving spoons and soup ladle heavy duty isi marked , oil dispenser bottles heavy duty isi marked , airtight storage containers heavy duty isi marked , spice box masala dabba heavy duty isi marked , grain storage bins heavy duty isi marked , kitchen jars or bottles set heavy duty isi marked , dish drying rack ss heavy duty isi marked , oven for food heating heavy duty isi marked , supply and installation of curtains foldable type heavy duty isi marked , induction heavy duty isi marked , induction pan for tea heavy duty isi marked , container for tea coffee and sugar heavy duty isi marked , small utensil rack heavy duty isi marked , tea cup with saucer heavy duty isi marked , coffee cup heavy duty isi marked , tea strainer heavy duty isi marked , coffee machine heavy duty isi marked , ceramic plate large heavy duty isi marked , ceramic plate small heavy duty isi marked , spoon large heavy duty isi marked , spoon small heavy duty isi marked , bowl large heavy duty isi marked , bowl small heavy duty isi marked , tea serving tray heavy duty isi marked , wall mounted smart tv 42 inches make and model sony bravia 2 4k or lg ur7500 4k or samsung qled q8f 4k or equivalent , wall mounted smart tv 42 inches make and model sony bravia 3 ultra hd 4k or lg oled evo ai g5 or samsung s95d oled 4k or equivalent , vacuum cleaner for pc heavy duty isi marked , vacuum cleaner heavy duty isi marked , hand held scanner heavy duty isi marked , photos of dignitaries for office heavy duty isi marked , acrylic or glass //bid details 2 / 52 incumbency board heavy duty isi marked , acrylic or glass table top elevator writing desk 16x12 inch 7mm thick colour smoke black heavy duty isi marked , antique brass ashok stambh pillar for table top heavy duty isi marked , cleaning tools scrubbers brushes heavy duty isi marked

CTN :44961942

03 Jun, 2026 65.76 Lacs

Jhalawar - Rajasthan

Tender For corrigendum : supply of spares for lnt make lt and ht switchgear, breakers and panel accessories of electrical circle and chp circle, csctpp, chhabra - racking handle for cn-cs 5000c, racking handle cn-cs 4000 h2, lockable trip push button type-aa, fixed arcing contact 800 s1, moving arcing contact 800s1, moving arcing contact, 5000c, hardware kit, spring charging, motor 220 v dc, spring charging limit, switch 220 v dc, closing coil 220 v dc, shunt release 220 v, dc, test position microswitch, service position microswitch, mdo to edo 800-, 2500c,3200h1(3p), mdo to edo 3200h1(4p), mdo to edo 5000c (4p), pole assembly 800c d/0, brekaer, door camlock-lhs, door camlock-rhs, racking handle, sic puller tq3 mat.-, delrin500, locking angle -tq3 m, tq3 earthing lip assembly, aux. busbar support, tq+tf2 v, aux.busbarterm assy, tf3,tq3-fr, aux.busbar support assy, tf3,tq3-fr, stainless steel door lock, td3,tf3-fr, bracket ,reset cord mn5 relay, ,tq3, xtension shaft, dropper support assembly, tq3 form iv, safety shutter tq3 d/o, safety shutter opener tq3, d/o, vcb spares 11 kv and 6.6, kv, big gear assembly, small gear -charging gear, assembly 12 kv vcb-25ka, subadha aux switch, (12no+12nc), tripping coil, closing coil, spring charging motor, vcb sds housing wo wire, pin locking channel, assembly, vaccum interrupter abb, vg6, drive rod assembly 800, a,1250a,2000a, vcb racking handle, spring charging handle, tripping rod, pin type channel racking, fixture 600 w, pin type channel racking, fixture 1000 w, breaker shutter assembly, 600 w, breaker shutter assembly, 1000 w, switron, switch,switron, 12no/12nc) aux., switch, rackin handel &, interlock, locking channel, assy 12kv 1250a 40ka, 1000w 3150a locking, channel assembly, limit switch, test/service,omron, make limit, switchmodel: x-, 10gm-b,contacts: 1, c/o, shutter roller, bracket 3150 a, roller for shutter, 3150a 40ka, pin for shutter, roller 3150a 40ka, 3150a breaker arm, contact - finger, contip finger f 2000a, vcb breaker, m4 flat washernylon(, 4.5 x 9, x 0.8mm), x 10-cozn pan head, m/c, screw, spring washer (zc), bottom conductor, arm, assy 12kv 3150a 40ka, top conductor arm, assembly 12kv 3150a, 40ka-abb, vi, 800a breaker arm, 800a vcb contact, finger assy new, flexible conductor, 12kv 800a, 40ka- abb vi, 2000a breaker arm, contip finger f 2000a, ø4 ss e-clips, ø6 ss e-clips, ø8 ss e-clips, ø10 ss e-clips 0.8mm, thk, circlip dia. 12mm, 1 mm, thick, 24 external type, circlip, wire circlip dia. 3.4+0/-, 0.4 ss, m3 x 25 spring pin, m3 x 30 spring pin, x 25 mm cotter pins, x 30 mm cotter pins, spring pin 6.5 dia x 40, long, split pin ø3x35, split pin ø1.8x20, connector type lug, for 800a,1250a,2000a &, 3150a), male connector - dnf, 14-250fim-m, female connector -, dnf 14-250fib-m, kv switchgear vcb, spares for type vk10l40h, rated voltage:12 kv, rated, normal current:800, a,rated s.c breaking, current : 40 ka & type, vk10q40h,rated, voltage:12 kv ,rated, normal current :3150, rated s.c. breaking, current : 40 ka, pds cable asm 12 kv, 800 a, short pds r phase asm 12, kv 800 a, short pds y phase asm 12, kv 800 a, short pds b phase asm 12, kv 800 a, breaker: type vk10l40h,, rated voltage:12kv, rated, normal current: 800a,, rated s.c. breaking, current: 40ka, line pt rack-in/out handle

CTN :45291428

02 Jun, 2026 NA

Jhajjar - Haryana

Tender For supply of norgren 802050 m 80 pneumatic cyl , norgren 802050 m 100 pneumatic cyl , norgren 802050 m 160 pneumatic cyl , c96kdb 40 400c pneumatic cyl , smc c96kdb 40 300c pneumatic cyl , smc cq2wb63 40dz lifting cyl , metalwork 50x320 pneumatic cyl , single pilot valve , solenoid valve sov 25 valve , solenoid valve sov 35 valve , wheels for 24h carousel , load cell flintec 200kg c3 s , belt for 24h carousel 30 meter , keypad for cuc mk iv , display for cuc mk iv , sprocket 14 teeth 65 bore , sprocket 8 teeth nylon bush , 213 bearing ntn , sprocket 42 teeth 60 bore duplex , needle valve hoke , taper strip ms 1800 mm , 1550 mm uhm taper 90 degree bend , 1850 mm uhm taper 90 degree bend , inlet star 4 pieces each set , outlet star 4 pieces each set , pcb 250 kg c3 s load cell flintech , ss plate 3 mm thick , 802050 m 40 pneumatic cyl , toggle joint for gd pt festo , roller bearing for gd pt , sensor ni10 m18 y1x h1141 , lower bell gd , load cell cable mkiv , flow control valve 1by8inch 4mm , quick exhaust valve 1by4inch 8mm , nrv 1by4inch festo , straight conveyor section gi , conveyor bend without chain gi , leg support conveyor gi , conveyor drive section gi , conveyor tail end section gi , sply of double stopper , pu tube 4 mm tube , pu tube 6 mm tube , pu tube 8 mm tube , flow control valve 1by4inchx8mm , brass block 230b938 gd pt , wl 24x430 reflective sensor sick , wll 24x430 optical sensor sick , wt 24 2x400s26 proximity sensor , manual hot air gun , load cell cable mkiv 3 meter , load cell cable mkiv 2 meter , gd sensor cable 0.75 mtr mkiv , bearing 6024 z2 , piston rod hex 40 300 , cpv ex pilot valve coil , shaft 40x380 mm en 8 , shaft 60x750 mm en 8 , shaft 60x660 mm en 8 , plummer block with ntn 212 bearing , ss wheel with grooves , angle joint for c channel , c channel for 90 degree bend , anchor fastener size 12 mm , anchor fastener size 14 mm , anchor fastener size 16 mm , spiral tube length 10 mtr dia 8mm , sxe9561 e86 00 valve norgren , dead man switch dp045r61 janatics , 10 mm bolt length 40 mm

State Government

CTN :45309859

29 May, 2026 NA

Chandrapur - Maharashtra

Tender For repair & maintenance work of acb drift eliminator of cooling tower- 7a & 7b with supply of drift eliminator & grid support channel at odp-ii, cstps, chandrapur.

Central Government And Public Sector

CTN :45335616

15 Jun, 2026 NA

Bilaspur - Chhattisgarh

Tender For supply of aluminum raw material used (alloy temper) confirming to straight cum stool ladder platform step ladder capacity 150 kg. rectangular tube, weather resistant, all steps and top rear horizontals are knee braced for additional support, non marking castor wheel provide higher mobility, holding handrail, large platform provides. trolley fabricated out of m. s channel. size-8' height and 9 steps. make : kalco/model k7024 or equivalent. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45297070

27 May, 2026 NA

Bangalore - Karnataka

Tender For supply of the ac1200 wi-fi gigabit router or equivalent is designed to deliver reliable connectivity with comprehensive technical specifications across multiple categories. under general features, it supportsieee 802.11 ac/n/g/b/a wireless lan standards and includes one 10/100/1000 gigabit wan port alongside four 10/100/1000 gigabit lan ports, ensuring versatile wired and wireless connectivity. the device is equipped with led indicators for power, internet status, and both 2.4 ghz and 5 ghz wlan bands, while its four external 5 dbi antennas enhance signal strength and coverage. it complies with multiple ieee standards, including 802.11ac, 802.11n, 802.11g, 802.11b, 802.11a, and 802.3u, and requires a windows, macintosh, or linux-based operating system, a compatible web browser, an ethernet adapter, and an active isp subscription for operation. in terms of functionality, it offers robust encryption options such as wep, wpa/wpa2 (personal/enterprise), wpa3 (personal), and wps (pbc), along with advanced features like a web setup wizard, multiple operating modes (router, access point, repeater, and client), smart wi-fi adjustment, bandwidth management, automatic channel optimization, nat firewall, dmz, spi, guest wi-fi with mbssid support, qos (wmm), and vpn support including ipsec, pptp, and l2tp tunnels with pass-through capabilities. the router operates on a power input of 100 to 240 v ac (50/60 hz) with an output of 12 v dc at 1 a, and is built to function within temperatures of 0 to 40?c (storage: -20 to 65?c) and humidity levels of 10% to 90% non-condensing (storage: 5% to 95%). it is ce certified and categorized under order information as an ac1200 wi-fi gigabit router or equivalent, with a minimum warranty period of 3 (three) years. [ warranty period: 36 months after the date of delivery ] ]

CTN :45021596

28 May, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : supply of supply & installation of 32 channel network video recorder with 4k support , supply & installation of 18tb surveillance grade hard disk , supply of suitable portable networking racks

CTN :45169297

06 Jun, 2026 NA

Guna - Madhya Pradesh

Tender For supply of computer assesories & computer & printer - name o itom, smps 450/ for desktop, compatible with standard atx cabinet, with power cable, smps 500w for desktop, compatible with standard atx cabinet, with power cable, ram 4gb /ddr4, compatible with existing system, ram 8gb ddr4, compatible with existing system, hard disk 1tb sata, 7200 rpm or higher, ssd /128gb/256gb/512gb sata/nvme for faster performance, motherboard atx/micro atx, compatible with intel i3/, ddr4 slots, m.2 + sata ports, pcie slots, hdmi/vga, lan, audio, with 3 years warranty, motherboard atx/micro atx, compatible with intel i5or amd ryzen, ddr4 slots, m.2 + sata ports, pcie slots, hdmi/vga, lan, audio, with 3 years warranty, motherboard atx/micro atx, compatible with inte i7 or amd ryzen, ddr4 slots, m.2 + sata ports, pcie slots, hdmi/vga, lan, audio, with 3 years warranty, motherboard atx/micro atx, compatible with amd ryzen, ddr4 slots, m.2 + sata ports, pcie slots, hdmi/vga, lan, audio, with 3 years warranty, cpu cooling fan with heat sink, intel/amd compatible, cmos battery cr2032 for motherboard, keyboard usb wired standard 104 keys/keyboard wirless+mouse, mouse usb optical/wirless mouse, lan cable cat per mtr, rj connector, toner cartridge compatiblehp series , +, ink cartridge (black/color) compatible with printer model, ink bottle 65 135 ml for ink tank printers (cmyk), fuser assembly for laser printer, complete unit, pickup roller for paper feeding mechanism, drum unit compatible with printer hp, drum unit compatible with mfp, printer logic board (formatter board), usb printer cable 1.5 3 meter, high-speed, desktop repair service including fault diagnosis and minor repair, os installation (windows/linux) with drivers and configuration, formatting & software installation, virus removal and optimization/anti virus, data backup / recovery, preventive maintenance (cleaning and check-up), technician visiting charges, printer repair service including troubleshooting, cartridge refilling (ink/toner), printer head cleaning, roller / fuser repair, printer installation & setup, amc (annual maintenance contract), technician visiting charges (printer), cctv bullet camera 2mp full hd, ip67, ir 30m, outdoor nos, cctv dome camera 2mp, ir 20m indoor nos, ip camera bullate/dome 2mp, ip camera bullate/dome 4mp/5mp, ip camera bullate/dome 5mp, cctv bullet camera 5mp hd, ir 40m nos, dvr 8 channel hd with remote monitoring, hdmi/vga, mobile viewing nos, nvr 8/channel for ip cameras with lan support nos, nvr /16 channel for ip cameras with lan support nos, nvr 32 channel for ip cameras with lan support nos, surveillance hdd 2tb, 24x7 recording support nos, poe network switch 8+2/4+2/+16+2, smps 12v 10a power supply with metal box nos, bnc connector for cctv connection nos, dc connector for camera power supply nos, coaxial cable rg59 with power cable copper meter, coaxial cable rg59 with power cable copper feet, lan cable cat6 for ip camera networking meter, lan cable cat6 for ip camera networking feet, pvc pipe 20mm for cable protection meter, junction box weatherproof for camera mounting nos, led monitor 22 inch hdmi/vga for cctv display nos, rack for dvr/nvr wall mount with lock nos, cctv installation including wiring, fixing, testing complete job, cctv configuration & testing job, amc cctv system yearly year, lcd projector basic, 3000 ansi lumens, xga or higher, hdmi/vga, 5000 hrs lamp life nos, lcd projector mid range, 3500-4000 ansi lumens, wxga/full hd, hdmi/usb/vga nos, lcd projector high end, 4000-5000 ansi lumens, full hd, hdmi/usb/lan, 8000 hrs lamp life nos, projection screen 6x4 or 7x5 feet, wall mount/manual nos, ceiling mount kit heavy duty adjustable nos, hdmi cable 10-15 meter high speed nos, vga cable 10-15 meter nos, audio speaker 20-40 watt for projector nos, wireless presenter / laser pointer nos, power extension board surge protected nos, projector installation including mounting, wiring, testing job, training & demonstr

CTN :45146771

25 May, 2026 NA

Thrissur - Kerala

Tender For purchase of equipment for electronics and communication department - 100mhz/2 channel digital storage oscilloscope(dso), sample rate 1gsa/s, record length - 14mpts, wavwform capture rate-400,000 wfm/s, serial decode/trigger functions, advanced math operations-fft, d/dt, integrate, square root 38 parameters automatic measurements, 7 inch tft lcd display, newest generation of spo(super phosphor oscilloscope) technology support usb host, usb device (usb tmc), lan (vxi-11), gpib (optional), pass/fail, trigger out, impts, 500uv/div sensitivity, 2 channel 3mhz function generator with modulation, 3 mhz function generator with sine, square, triangle, ramp, pulse, ttl & dc, frequency range 0.3hz to 3mhz, amplitude and frequency display, internal and external modulation by any signal by am,fm,pwm,pam,fsk,ask, auto ranging 40mhz frequency counter, auxiliary generator with frequency 20hz-20khz, square wave rise time- better than 50ns, dual channel power supply 0-30v continuous variable regulated 30v-2a, 0 to +/- 15v-1a, 5v-5a multiple power supply, dc 0 to 30v/2a, 0 to +/- 15v/1a tracking, 4.5 to 5.5 / 5a digital display for voltage and current protection against overload and short circuit, adjustable current limiter, constant current & constant voltage, multimeter - digiital - dc voltage 1000v, ac voltage 1000v, dc accuracy +/- 1% +3 digit, current dc 10amp, ac 10 amp, dc accuracy +/- 1.5%+3 digit, ac accuracy +/- 1.5% +3 digit, resistance 40 mohm - resistance accuracy +/- 1.5% +3 digit, capacitance :1000uf; capacitance accuracy +/- 5% + 5 digit. cat iii 600v saftey rating, bigger display with bright white backlight. over voltage indicator, frequency and temperature measurements, voltage, resistance, continuity, capacitance measurements, input terminal for ac and dc current measurements upto 10a, diode test, data hold, min/max ammeter and voltmater included.

Square Channel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government And Public Sector

Central Government And Public Sector