Latest ss screw Tenders | Government ss screw Tenders

State Government

CTN :45626266

29 Jun, 2026 11.59 Lacs

Belonia - Tripura

Tender For - r/ mtc. of rws/jjm schemes/ s.h.: providing & fitting fixing of electrical accessories, spare of panel board of different water supply schemes at different locations under hrishyamukh rd block under dws sub-division, belonia during the year 2026-27. - providing and fitting fixing of spare contact kits without coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., providing and fitting fixing of standard operating coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., supplying and fitting fixing of 4 pole ac control contactor (nhd series) suitable for bch made starter (standard coil voltages are 24, 110, 220/240 & 380/415 v, ac hz)., supplying and fitting fixing of 3 pole power contractor (type-mnx) suitable for 10 hp to 25 hp motor.mnx-25 (for l&t made starter), supplying and fitting fixing of pneumatic timer pn type delay relay-electro pneumatic) suitable for delay of time upto 30 sec. (bch made)., supplying and fitting fixing electronic timer type st-100 (l & t make) suitable for 240/300/415v, 50 hz having ranges for 3-30 secs/12-120 secs., supplying and fitting fixing of single phase preventer on delay 2 sec off delay 7 sec 65 vac asymmetry., providing & supplying of kit-kat rewireable porcelain fuse (cut-out) carrier & base of havells made (delux quality)., a) 63 amps/415 volt, b) 100 amps/415 volt, supplying and fitting fixing of 3 pole power contractor (type-ml) suitable for 10 hp to 25 hp motor.type ml-2 (for l&t make starter), supplying and fitting fixing of thermal timer type gt-200 (l & t make) suitable for 230/250v, 360v, 400/440v, 50 hz for 5-18 secs., supplying and fitting fixing of thermal overload relays mn2 type (directly operated& direct mounting on mnx 9-40 contactor) of l & t made. (suitable for ml/mnx type)., a) for relay range 9-15 a., b) for relay range 14-23 a., c) for relay range 20-33 a., supplying and fitting fixing of thermal overload relays (directly operated& direct mounting on ml-2/3 contactor) having relay range 9-14a/13-21a of l & t made. (suitable for ml-2/ml-3 type)., supplying and fitting fixing of citation-m overload relays (direct mounting with built in single phase protection) having relay range of bch made., a) for relay range 8.9-13.5 a., b) for relay range 13.2-30.00 a/17.4-24.00 a., c) for relay range 22.00-30.00 a., providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) gamair wood/ plywood pannel board for fitting fixing of electrical items, in/c 2 nos ms angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the engineer-in-charge., providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder complete as per specification and direction of the engineer-in-charge., providing and fitting fixing heavy duty box type (resin filled) power factor correction capacitor l & t make etc. complete as per specification and direction of the engineer-in-charge.i) 5-15 kvar 440 v, supplying isi marked/ taparia make tools for water supply scheme., i) sly wrench, ii) screw driver, iii. pipe wrench, iv. plier, v. hexo frame with blade, providing and fitting fixing of moving iron type, range 0-500 v, 96 mm x 96 mm size ac volt meter ( l & t / ae make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the engineer-in-charge., providing and fitting fixing of moving iron type, range 0-100/0-200 amp, 96 mm x 96 mm size ac amps meter direct reading type ( l & t / ae make) with selector switch and ct coil as a electrical instrument of the pannel board as per specification and direction of the engineerin-charge., providing and fitting fixing stee

CTN :45627252

30 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of stainless steel sinks for domestic purposes (v3) as per is 13983 (q2) , rotational moulded polyethylene water storage tanks (v3) conforming to is 12701 (q3) , plastic seats and covers for water - closets as per is 2548 (q3) , screw wood steel 12 mm , varnish clear , nails wire steel 20mm , screw wood steel 65 mm , screw wood steel 50 mm , screw wood steel 15 mm , screw wood steel 30 mm , screw wood steel 40 mm , nails wire steel 40 mm , french polish , pegs alu powder coated , touch wood polish , nails wire steel 12 mm , screw wood steel 35 mm , nails wire steel 25 mm , brush 50 mm , pianotype hings 6 feet long , ss handle for drawar , screw wood steel 20 mm , knob 40 mm , nails wire steel 50 mm , sunmica sheet 2400x1200x1.5 mm thick , fevicol , screw wood steel 25mm , paint synthetic enamel og , lock for drawar , plywood teak face 2400x1200x3.5mm thick , plywood bwr 2400x1200x12 mm thick , cushion size 550x530x100 mm 32 density with tapestry cloth , prelam mdf board 8feetx4feetx18 mm thick , sunmica sheet 2400x1200x1 mm thick , lock for almirah steel , nipple 20mm x300mm , gi tee 20 mm , ptmt ball cock 25 mm complete , union gi 50 mm , hex nipple 20 mm , union gi 40 mm , elbow gi 20 mm , socket reducer 25x50mm , nipple 25mm x300mm , gi 3 way elbow 20 mm , gi tee 25 mm , gi tank nipple 20 mm , elbow gi 25 mm , ptmt ball cock 20 mm complete , bow handle alu 125 mm , cp grating with holw 125 mm , gi bend 15 mm , gi socket 15 mm , gi elbow 15 mm , door stopper alu , nipple 15mmx300mm , cp waste coupling 32 mm , oil putty , cp grating 125 mm , gi nipple 15mmx100 mm , ss but hings 100mm , union gi 15 mm , m seal 100 gms , union gi20 mm , gi socket 20 mm , gi nipple 15mmx150 mm , paint synthetic enamel red , ss but hings 75 mm , gi nipple 15mmx50mm , ptmt grating doom 125 mm , gi tee 15 mm , brush 100 mm , pvc jet fitting for ewc , brush 75 mm , ptmt pvc connection 450 mm long , ptmt grating 150 mm , ptmt grating with hole 125 mm , gi plug 20 mm , gi plug 15 mm , gi 3 way elbow 15 mm , socket reducer 15x20mm , paint synthetic sky blue , bell push pianotype , two way switch 6 amp , lamp holder pendent bakalite , bed switch 6 amp , plywood commercial 8 feet x4feetx6 mm , plywood commercial 8 feet x4feetx12 mm , plywood bwr8feetx4 feetx4 mm , plywood bwr 8feetx4feetx8mm , mirror cabinet in ptmt , ss wire cloth 0.56 mm dia with aperture 1.14 , looking mirror pvc of size 450x600x3mmthick , hydraulic door closure , cp soap dish , cp sink cock 15mm , wiremesh woven 0.63 mm dia aperture 1.18 mm , ptmt ball cock 15 mm complete , pvc towel rail 600 mm , glass corner shelf with grill , sliding door bolt alu 300 mm , ptmt flushing cistern 10 ltr cap , cp towel rail 600 mm , alu bow handle 150 mm , pvc towel rail 450 mm , helical door spring , ptmt jet spray with 1 mtr tube , paint synthetic enamel black , paint synthetic enamel white , bib cock cp 20mm , waste pipe pvc for whb 32mm , paint synthetic enamel yellow , pvc connection 15x600 with ptmt nut , alu lugs for 240 sqmm cable , alu lugs for 300 sqmm cable , alu lugs for 185 sqmm cable , alu lugs for 400 sqmm cable , alu lugs for 120 sqmm cable , alu lugs for 70 sqmm cable , alu lugs for 150 sqmm cable , alu lugs for 50 sqmm cable , alu lugs for 95 sqmm cable , alu lugs for 35 sqmm cable , desert cooler steel body cap 85 ltr //bid details 2 / 78

CTN :45619892

29 Jun, 2026 2.77 Lacs

Sonitpur - Assam

Tender For tender for supply of electric circular saw for wood cutting as per specification pdf , electric circular saw for wood cutting as per specification pdf , electric wood planner as per specification pdf , electric wood planner as per specification pdf , 82 mm x 29 mm high speed steel planer blade as per specification pdf , 82 mm x 29 mm high speed steel planer blade as per specification pdf , small angle grinder 4 as per specification pdf , small angle grinder 4 as per specification pdf , tile cutting machine stone as per specification pdf , tile cutting machine stone as per specification pdf , wood cutting blade 10 inches as per specification pdf , gauging mason trowel as per specification pdf , gauging mason trowel as per specification pdf , electrician screw driver set as per specification pdf , electrician screw driver set as per specification pdf , rotary corded brushless electric drill 750 watt as per specification pdf , rotary corded brushless electric drill 750 watt as per specification pdf , impact heavy hammer drill machine 850 watt as per specification pdf , impact heavy hammer drill machine 850 watt as per specification pdf , full body harness as per specification pdf , steel measuring tape 5 mtr x 19 mm with matric and inch scale as per specification pdf , fiberglass measuring tape 30mtr x12.5mm as per specification pdf , total cut resistance gloves as per specification pdf , total safety boots as per specification pdf , total safety boot as per specification pdf , safety helmet as per specification pdf , iron pad lock as per specification pdf , welding electrode holde as per specification pdf , single phase inverter mma welding machine as per specification pdf , drill bit set totem hss 1mm to 13 mm as per specification pdf , drill bit set totem hss 1mm to 13 mm as per specification pdf , demolition hammer sds chisil kit as per specification pdf , 10 meter 49 feet welding machine cable as per specification pdf , 10 meter 49 feet welding machine cable as per specification pdf

CTN :45624706

13 Jul, 2026 NA

Baitul - Madhya Pradesh

Tender For raw materials office stationary - package 1 hardware items, m.s.round bar 65 mm, m.s.round bar 55mm, m.s.round bar 45 mm, m.s.round bar 40mm, m.s.round bar 35 mm, hss tool bit 1/2 x6 inch, hss tool bit 3/8x6 inch, hss tool bit 1/4x6 inch, power saw blade, hacksaw blade (miranda), cotton waste, oil 90 num, oil 40 number, cutting oil, emery cloth 200 grit, grease, diesel filter, oil filter, air filter, power steering oil, emery paper 36 grit, sulphuric acid (h2so4), soldering paste, ms flat 50x10 mm, ms flat 50x5mm, ms flat 65x10 mm, ms flat 70x10 mm, ms flat 75x10 mm, ms flat 100x10 mm, ms flat 50x12 mm, hexa blade (pack of 100), round bar 10mm ms,, gi sheet 0.5 mm, dowel pin, emery paper 80 grit, counter sunk head screw, round head slotted screw, drill bit 3mm, drill bit 4mm, drill bit 6mm, drill bit 8mm, drill bit 10 mm, drill bit 12 mm, punch, pan head revit, ms angle 25x25x3 mm, ms angle 40x40x5 mm, ms strip 20x2 mm, ms pipe 50x3 mm, copper pipe 1/2 inch, welding electrode 2.5 e6013, welding electrode 3.15 e6013, welding electrode 4mm e6013, oil paint, soft wood 4x4x5, soft wood 3x3x5, soft wood 2x1x5, soft wood 1x1x5, fevicol, nails 1, nails 2, nails 3, screw1, screw 2, screw 3, oil stone, wood polis titli, touch wood, plywood 8mm (4feet x6feet), plywood 12mm (4feet x6feet), plywood 18mm (4feet x6feet), emary pepar 80 no, emary pepar 100 no, emary pepar 120 no, grinding disk, grinding disk, cotton tape, pili mitti powder, wooden putty, polyfix wood sealer, paint, distilled water, oil paper sheet, steel wire brush, multipurpose cleaning brush, brush, cleaning solvent, benton grease, battery clamp, hydrolic fluid, package 2 electrical, battery, soldering iron, soldering wire, soldering flux, resistance 1 ohms, resistance 10 ohms, resistance 1k ohms, resistance 10 k ohms, resistance 100k ohms, inductor 4.7uh, inductor 10uh, inductor 5uh, inductor 6uh, inductor 8uh, inductor 330uh, capacitor 3f, capacitor 3.3f, capacitor 5f, capacitor 6f, capacitor 5uf, capacitor 6uf, capacitor 8uf, leds 2v, leds 2v, leds 2v, leds 2v, leds 2v, push buttons, ic 741, ic 555,, mcb,ic7806, mcb, ic7905, switch two way, 5 pin shocket wall mounting type, wall mount batten-holder, bakelite angular-holder, fan regulator mounting type, hrc fuse -, 12 mm no.5 wood screws, 20 mm no.6 wood screws, 25 mm no.6 wood screws, neon lamp switch bord, machine screw, saddles, tube light choke, tube light rod, tube light holder plain, h.p.mv lamp holder suitable for, h.p.mv lamp choke -, capacitor, lead acid battery, pvc copper wire 1mm (90meter), pvc copper wire 1.5 mm (90meter), pvc copper wire 2.5mm (90meter), crimping spade 6a, crimping spade 16a, mccb, elcb, rccb, helogen lamp incandescent lamp, high pressure mercury vapor lamp, l.p.m.v lamp, high pressure sodium lamp, low- pressure sodium lamp led, helmat electrician yellow color, screw driver kit set, toggle switch,, resistors, carbon composition 62k , 1/4 w, 5%, resistors, carbon composition 33k 1/4 w, 5%, resistors, carbon composition 22k 1/4 w, 5%, resistors, carbon composition 220 1/2 w, 5%, resistors, carbon composition 330 1/2 w, 5%, resistors, carbon composition 470 1/2 w, 5%, resistor 10 ohms 5w, resistor 1k ohms 2w, resistor 330k ohms 2w, resistor 2 ohms 5 w, resistor 50 ohms 5w, potentiometer 500 ohms, 0.5a, potentrometer 100 k ohm, resistor 22 ohms 1 w, pvc saddles, led, intermediate switch, tap roll electrician, diode in4007, step-down transformer, variable resistor, dry cell, zener diode,, buzzer, conduit pipe metal iron, bare copper wire, multistrand cable 14/0.2 mm (90meter), multistrand cable 23/0.2 mm (90meter), multistrand cable 48/0.2 mm (90meter), incandascent lamp, pvc cable 3 core, pvc single stranded copper cable 1/1.4 ,1.5 mm, pvc single strand aluminium cable 1/1.8 , 2.5 sq mm, cotton tap, binding steel gi wire, lead and tin alloy, impregnated cotton tap, bitumen compound, lug board, double pole switch, lamp holder bayonet cap batten, barrater resistor, 4 way terminal pad, miniature l

CTN :45024470

25 Jun, 2026 1.00 Lacs

Pune - Maharashtra

Tender For bid to ras supply of next gen electronic study material d d - arduino uno with ic , arduino nano soldered , arduino mega , breadboards and mini breadboard , general purpose soldering board , i2c module for display soldered , usb cable set , 9 volt battery , line voltage regulator , water pump module , 8 in to 8 led matrix module , bluetooth , ldr module , joy stick , active buzzer , motor driver , dc plastic gear motor with wheel , nodemcu with wi-fi , rgb leds , leds red , leds green , leds blue , led yellow , leds white , 555 timer ic , diode kit , transistor kit , push button switch , mq 2 smoke detection , mq 3 alcohol- ethanol sensor , mq 4 methane natural gas sensor , mq 5 methane liquified gas sensor , mq 6 liquified petroleum gas sensor , mq 7 high sensitivity co carbon monoxide sensor detector , mq 8 hydrogen gas sensor , mq 135 air quality sensor , ultrasonic sensor module hc sr 04 or compatible , soil moisture sensor module , rain drop sensor , temperature sensor , temperature sensor and humidity sensor module , 10000 mah 5 volt power bank , lithium-ion battery , lithium-ion battery charger , lithium-ion battery holder , 18650 battery holder x 2 , solder wire , sensor add on kit , filament for 3d printer , filament storage box , string only mtr , rubber band , popsicle sticks , wood glue bottle , wire cutter , flexible cutting mat , stepped drill bit , glue stick , nuts bolts and screw , sand paper , various grit 100 , various grit 120 , neo 6m gps module , tello drone battery , pressure sensor lps22hb , prime kit , male to male jumper wires bundles , male to female jumper wires bundles , female to female jumper wires bundles , 512gb ssd , 1000 va microtec , 19v 3.42 amp

CTN :45419216

22 Jun, 2026 NA

Gwalior - Madhya Pradesh

Tender For bid to ras tender for supply of led street light fitting , ferric alum , high efficiency light led , onload changeover switch , led bulb 12 watt , ug cable armoured , mcb single pole c series 32 amp , led flood light 70 watt , ug cable armoured , rubber insertion sheet , rubber mats for electric purpose , plug top 3 pin 16 amp , residual chlorine testing kit , ht tape insulation , battery charging cable heavy duty , alluminium lugs , mcb single pole c series , socket out let modular type , switch flush type , alluminium lugs , fuse wire copper thined , fuse wire copper thined , fuse wire copper thined , gi union , alluminium lugs , gi tee , gi nipple , electrolite sulfuric acid for battery , gi socket , gi socket reducer , gi plug , sink mixer , health faucet , brass cp towel rail , brass cp bib cock with flange , brass cp sink coupling , bath room cabinate single mirror , pvc connection , glass shelf , green ply , brass cp shower rose , pvc waste pipe , brass cp bib cock , ss tower bolt , gi plug , ss tower bolt , cement white portland , zero degree hinges , bath room cabinate double mirror , overhead bathroom shower , ss sliding door bolt , brass cp concealed stop cock , wooden beading for glass pane , gi socket , gi nipple , door stopper aluminium double , brass cp centre hole mixer , bend pipe pvc , gi nipple , gi elbow , gi union , ss screw wood , ss screw wood , ss handle fabricated type , stainless steel plate rack , ready mix plaster , rubber insertion sheet , lead wool , fuse wire copper thined , steel screw , gate valve , gi tee , anti freeze coolent , nuts , bolts and washers any size and any shape , gi nipple , gi tee reducer , gi socket reducer , gi tee reducer , gi plug , gi socket reducer , distilled water , dp switch modular , wooden beading , elbow reducer , ss screw wood , gi nipple , door handle , gi nipple , gi socket , gi union , ss screw wood , flush washer for flushing cistern , gi nipple , washer pvc , nails wire

CTN :45610636

30 Jun, 2026 NA

Gurgaon - Haryana

Tender For supply of copper cable 2 core 0.25 sqmm white in colour , copper conductor pvc insulated single core 0.75 sqmm , overmolded frame plate with matching cover 6 module , upvc casing caping round size 19 or 20mm double lock , overmolded frame plate with matching cover 4 module , capacitor 2.5 mfd , ss ball valve 100mm , braided hose flexible stainless steel flame proof conduit 19 mm dia 500mm length with both ends screwed , braided hose flexible stainless steel flame proof conduit 19 mm dia 300 mm length with both ends screwed , stainless steel ball valve of 80 mm stainless steel 304 body , stainless steel ball valve of 65 mm stainless steel , stainless steel ball valve of 40 mm , brass gate valve 100mm with open and close indicator and locking arrangements , brass gate valve 40mm with open and close indicator and locking arrangements , es 10 w led retrofit tubelight t8 2 ft , aluminium sliding door bolt 250mm , aluminium sliding door bolt 300mm , aluminium door stopper double leg 75mm long , aluminium handle 150mm long , aluminium handle 100mm long , aluminium hesp amd staple 75mm long , door stopper 75mm single leg stainless steel , door handle ms 150mm , ewc seat cover white , grating doom waste hole 125mm , grating doom waste hole 100mm , gi wire mesh 0.56mm dia and 1.14mm aperture 1.2mx15 mtrs long , lid with thread for pvc water tank 1000 ltrs , lid with hing for pvc water tank 500 ltrs , ms butt hings 100mm , ms handle for steel window left and right , ms but hinges 75mm , ms door stopper double leg 75mm long , ms tower bolt 200mm bolt dia 10mm , ms handle 150mm stove enamelled , ss screw flat head 50mm long 100 nos pkt , ss screw flat head 20mm long 200 nos pkt , ss screw flat head 25mm long 200 nos pkt , ss wire mesh 0.36mm dia and 1.40mm aperture 1.2mx15 mtrs long , towel rail cp 600mm , towel rack platinum series , towel ring opel series , vitreous china white half stall urinal flat back , vitreous china whb 630x450mm , cpvc pipe 20mm dia 3mtr length , ply wood commercial 6ftx3ftx12mm , pre laminated partical board 12mm size 8ftx4ft , ptmt ball cock with epoxy coated rod 20mm , ptmt ball cock with epoxy coated rod 15mm , ptmt angle stop cock 15mm dia , pvc waste pipe 32mm , ptmt connection pipe with ptmt nuts 18 inch , ptmt connection pipe with ptmt nuts 24 inch , paint se 1st quality smoke grey , paint se 1st quality white , paint brush 100mm nylon bristle , paint brush 50mm nylon bristle , ms but hinges 50mm , paint se 1st quality smoke grey shalimar , ply wood commercial 8ftx4ftx 9 mm , ptmt ball cock long body with flange 15 mm , ptmt connection with ptmt nuts 15 inch , pvc float valve 25 mm dia , pvc shower rose swivelling type 15mm , pvc waste pipe 40mm heavy duty , screw wood steel 15mm long 200 nos pkt , screw wood steel 40mm long 100 nos pkt , wall mounted ewc , towel rail 24 inch 600 mm pvc , wall putty , ss mortice lock set 200mm with handle , cp toilet paper holder , door seal with pvc body fitted with rubber sheet 1 mtr , pvc lid for oht cap 2000 ltr , cp tumbler holder wall mounted for bathroom , pvc urinal waste pipe for 32mm , cushion foam with teapostry cover of size 560x530x100mm 40 density , fevicol 1 kg pack self adhesive resin , looking mirror for table dressing gents 750x350x5mm , looking mirror for table dressing ladies , l shape bracket ms 19mmx19mmx60mm , prelaminated mdf board 8ftx4ft 18mm one side teak face and other side , pvc seat for chair dining 4 mm thick , pvc seat and back for chair t or s without arms , pvc seat and back for chair verandha , //bid details 2 / 127 plywood commercial 2440x1220x12 mm , ply 18mm 8ftx4ft bwr grade , plywood 12mm 8ftx4ft bwr grade , plywood 12mm 7ftx3ft bwr grade , ply pvc board 8ftx4ft 18mm , prelaminated particle board both side 8ftx4ftx18mm , prelaminated mdf board 8ftx4ft 18mm one side teak faceand other side , cushion 100mm thick size 21 inch x 22 inch with medium softness prosofa latex , sunmica sheet 8inch xinch 1mm thick , prelaminated particle board

CTN :45602270

09 Jul, 2026 NA

Jalandhar - Punjab

Tender For supply of cushion 40 density for sofa set duly stiched with tapestory cloth , mirror for table dressing gents map , plywood bwr commercial one side teakface of size 8 feet x 4 feet x 12 mm , looking mirror for table dressing gents ref , pvc sheet for chair dinning suitable , mirror for table dressing ladies of size 1200mm x 600mm x 5 mm , plywood bwr commercial 8feet x 4feet x 6mm thick , pvc sheet for chair school with hand board map suitable , pvc seat and back for chair verandah , lock for steel almirah large , telescopic channel 14 inch long , hand rest for chair school with hand board map suitable , plywood bwr commercial 8feet x 4feet x 4mm thick , plywood bwr commercial 8feet x 4feet x 19mm thick , plywood bwr commercial one side teakface of size 8feet x 4feet x 6 mm , plywood bwr commercial 7feet x 3feet x12mm , plywood bwr commercial one side teakface of size 8feet x 4feet x 4mm thick , pre laminated particle board exterior quality 9feet x 6feet x 18mm , lock for almirah steel medium , fevicol sr , turpentine oil , telescopic channel 8 inch long , cushioned sheet and back for chair writing , fevicol sh , copper oxidise steel pegs for hat stand , paint synthetic enamel olive green , hessain cloth 48 inch wide , lakh dana , paint synthetic enamel white , shocker hydraulic spindle for chair revolving , tape newar nylon , pvc base for chair revolving with caster wheel , pvc arms for chair computer , hasp and staple aluminium 100mm , knob for table or drawers , touch wood , regmar patta of 50 ltr long , teakwood beading 4mm thick 18mm wide , paint synthetic enamel black , french polish , teakwood beading 4mm thick 25 mm wide , telescopic channel 12 inch long , pvc shoe with screw , chalk mitti , yellow mitti , pvc beading 20mm wide 6 feet long , flat iron patti fpr hat stand , screw wood steel 40mm of 100 nos , light glossy , light siller , paint brush 75mm , paint brush 25mm , paint brush 50mm , machine screw 50 mm of 100 nos , butt hinges 50mm , markine white , thinner , screw gypsum 75 mm of 100 nos , screw gypsum 25 mm of 100 nos , nails 1 inch no-17 and 19 , nails wire 25mm 14 nos , nails wire 40mm 14 nos , nails wire 50mm 14 nos , screw gypsum 60 mm of 100 nos , nails 2 inch , cloth malmal , screw gypsum 50 mm of 100 nos , rubber bush for chair verandah , pvc bush for chair visitor , emery paper no120 , emery paper no100 , emery paper no150 , screw wood steel 25mm of 100 nos , nails 1.5 inch , nails 1.75 inch , nails 2.5 inch , nails 3 inch //bid details 2 / 61

Central Government/Public Sector

CTN :45609341

29 Jun, 2026 81.0 Thousand

South Andaman - Andaman And Nicobar Islands

Tender For supply of timber shore soft wood him season 100x100x3000 mm , splinter box 160x160x127 mm , firmer chisel short plain 50 mm , wedges soft wood 1250 x 50 x 25 mm thick , timber planking tg 75 x 225 x 3000mm , staple steel clamp round 150 mm , splinter box 406x406x127 mm , plug tapered soft wood 75 mm x 25 mm x 12 mm , plug tapered soft wood 300mm x 150mm x 100mm , hard wood wedge , jubilee clip 30mm 50mm 100mm as per is 4762 size type a , arm badges , battery dry 1.5 v size medium , file 300 mm bastard rough had with 25 mm width bondel , hand hacksaw blade a250x12.5x0.63x1.0-is 2594 hs , oakum white , nail 63 mm chequred head , spanner wheel 305 mm af , engineers screw driver 1.6 x 10 x 200 mmpr , tape measuring steel 15 meter in metallic case

State Government

CTN :45606470

29 Jun, 2026 25.28 Lacs

Barnala - Punjab

Tender For annual rate of contract supply of hardware material for annual repair and maintenance for f/y 2026-27 supply of oxidised mild steel hasp and staples (safety type) 115 mm of approved quality., supply of oxidised mild steel screws (pkt. of 200 nos.) (netle f&d make or equivalent), a. 20 mm, b. 25 mm, c. 30 mm, d. 35 mm, e. 50 mm, f. 60 mm, g. 75 mm, supply of ss screws (pkt. of 200 nos.) (netle f&d make or equivalent), a. 20 mm, b. 25 mm, c. 32 mm, supply of black screws (pkt. of 200 nos.) (netle f&d make or equivalent), a. 20 mm, b. 25 mm, supply of chipboard screws (pkt. of 200 nos.) (patta, omni make or equivalent), a. 3.5 x 20 mm , b. 3.5 x 25 mm, c. 3.5 x 32 mm, d. 3.5 x 38 mm, e. 3.5 x 50 mm, f. 3.5 x 60 mm, g. 3.5 x 75 mm, supply of oxidised mild steel sliding door bolt of approved quality. , a. 250 x16 mm, b. 300 x16 mm , supply of oxidised mild steel handles of approved quality., a. 100 mm, b. 125 mm, supply of anodised aluminium tower bolt (barrel type) of approved quality., a. 100x10 mm, b. 150x10 mm, c. 200x10 mm, d. 250x10 mm, e. 300x10 mm, supply of aluminum sliding door bolt of approved quality., a. 250 x16 mm, b. 300 x16 mm, supply of oxidised mild steel tower bolt (barrel type), a. 100x10 mm, b. 150x10 mm, c. 200x10 mm, supply of anodised aluminum handles of approved quality., a. 75 mm, b. 100 mm, c. 125 mm , d. 150 mm, supply of plywood water proof (make green, duro, century, archidply, modiply & evergreen), a. 06 mm, b. 09 mm, c. 12 mm , d. 18 mm/19 mm, supply of marandi/red champ cut to size including grooving & finishing all respect (well seasoned), supply of second class teak wood cut to size including grooving & finishing all respect (well seasoned), supply of teak plywood (make internet maxima & sanik, green, national or equivalent), a. 04 mm, b. 06 mm, c. 12 mm , supply of marandi wood beading finishing all respect (well seasoned), a. 1/2" x 3/4" , b. 1.1/2" x 1/2", supply of sunmica sheet (8' x 4') as per sample or approved quality. (make green, duro, century, archidply, modiply & evergreen), a. 0.8 mm, b. 01 mm, supply of masking tape , supplying of panelled shutter for doors including isi marked black enamelled m.s. butt hinges with necessary screw, including panelling of 12 mm thick water proof ply. kiln seasoned and chemically treated hollock wood. 30 mm thick shutter. , supply of block board construction flush door with teak wood ply on both faces 30 mm thick of approved quality., supply of wire gauge shutters using galvanized m.s. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws 35mm thick shutters kilin seasoned and chemically treated hollock wood , supply of pvc door shutter as per is , specification of sintax, rajshiri or make or equivalent, supply of wood primer (nerolac, asian, burger, dulux or equivalent) of approved quality., supply of water based exterior primer (nerolac, asian, burger, dulux or equivalent ), supply of red oxide primer (nerolac, asian, burger, dulux or equivalent), supply of synthetic enamel paint (nerolac, asian, burger, dulux or equivalent ) of approved quality., supply of terracotta paint (nerolac, asian, burger, dulux or equivalent) of approved quality., supply of acrylic smooth exterior paint (nerolac, asian, burger, dulux or equivalent) of approved quality., supply of plastic emulsion paint (nerolac, dulux, asian, burger, dulux or equivalent make), supply of touch wood polish (nerolac, asian, burger, dulux or equivalent ) of approved quality., supply of turpentine oil of approved quality., supply of spirit of approved quality., supply of colure tube (100mm), supply of paint roller (size 10”), supply of thinner, supply of silicone, supply of siller, supply of putting patti of approved quality., supply of malmal/mulmul cloth of approved quality., supply of lime (as per approved sample), supply of indigo (neel) (as per app

Ss Screw Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government