Latest ss bar scrap Tenders | Government ss bar scrap Tenders

CTN :41735154

10 Sep, 2025 NA

Villupuram - Tamil Nadu

Tender For providing of work for new doors - abs door/equivalent (providing and laying)/(supply and fixing) for (3.39 sq.mtr) providing of 35mm thick factory made prelaminated abs door shutter moulded in different designs, consisting of all round frame made out of water proof solid foam pvc bar of size 20 x 32mm, reinforced by 32 x 32mm 2 nos for vertical made out of lvl, core material of 32mm thick high density craft paper honey comb board, sandwiched on both side with prelaminated abs sheet thickness of 1.5mm. pvc edge banding of size 0.45mm on the vertical sides. hardware made out of steel coated butterfly hinges 3 nos, for each shutter and isi make ss round lock with the standard specification., aluminium door (2.52 sq.mtr) for computer room fabricating, supplying and fixing in position of aluminium anodized powder coated of single leaf door with half paneled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick plain glass at top. the outer frame shall be with all box section at 2.319 kg/mtr and shutter frame made of section vertical & top rail @ 1.292 kg/m and aluminium clips:@ 0.176 kg/m, aluminium handle: 100 x 30 mm @ 0.988 kg/m and necessary accessories such as aluminium clips, rubber beading, pvc felt, handle for a length of shutter, locking arrangements, furniture fittings such as aluminium tower bolts 250 x 12mm 1 no. hydraulic door closer 1 no, lock -1 no. door stopper with rubber bush including cost of material labour charges and power charges required for fabrication including, chipping, dismantling masonry and redoing etc.

CTN :41727059

26 Sep, 2025 NA

Multi City - Multi State

Tender For supply of 200 watt 6.6 amp bi-pin halogen lamp , supply of 105 watt 6.6 amp reflector type halogen lamp , supply of 45 or 48 watt 6.6 amp reflector type halogen lamp , supply of 45 or 48 watt 6.6 amp pkx30d type halogen lamp , supply of self amalgamating epr ht electrical tape , supply of elevated type omni- directional blue, medium intensity led type taxiway edge light fitting , supply of faa certified or compliant model led type inset omni directional blue light fitting , supply of faa certified or compliant model suitable for aviation visual aid all weather operation runway guard light , supply of faa certified or compliant model led type inset uni-directional stop bar light fitting , supply of faa certified or compliant model led type inset bi- directional fitting , supply of faa certified or compliant model, led type inset bi-directional fitting , supply of 24 or 25 volts led driver , supply of 35 volts led driver , supply of led driver , supply of led assembly , supply of frangible main housing , supply of front spreader green glass , supply of ms blanking plate , supply of stop bar controllers , supply of 24vdc 3watt per module

State Government

CTN :41719915

04 Sep, 2025 30.00 Lacs

Multi City - Bihar

Tender For biharsupply of machines and laboratory equipments for mechanical & civil engineering in the premises of government engineering college, kaimur - demonstrate & study of steam boilers and its mounting & accessories, to learn the mechanical properties of engineeing materials. (chart/, flex), to learn the working of steam power plant. (chart/ flex), to learn the working of vapour compression refrigeration system., (chart/ flex), to learn the working of impulse steam turbines. (cut section model), to learn the working of gas turbines. (chart/flex), to learn the working of reaction steam turbines. (cut section model), to learn the working of vapour absorption refrigeration system, hemispherical sectional models of screw threads, , standard bolt, , bolts of four types, , foundation bolts, , locking arrangement of bolts, , rivetted joints-wooden, , bush bearing, , plummer block or pedestal bearing, , foot step bearing, flexible coupling, , flanged coupling, , stuffing box, , connecting rod , spark plug, , sine bar complete set, (a) sine bar (100mm, hardened tool steel), (b) sine bar (200mm. hardened tool steel), sine centre complete set, sine centre complete set ( roller distance 200mm centre height : 65mm or roller distance 300mm, centre height 75 mm), vernier bevel protector, vernier bevel protector( blade edge angle 60 deg , 45 deg edge, blade length 150mm, ) range = 360deg, lc: min, it is capable of ), lathe tool dynamometer, x direction measuring range : 0 ± 3000 n ( 0. 1 n sensitivity ), y direction measuring range : 0 ± 2000n ( 0.1 n sensitivity ), z direction measuring range : 0 ± 2000n ( 0.1 n sensitivity ) measurement : x, y & z direction force measurement simultancously. data recording, signal conditioner : gpds signal conditioner accuracy = ± 0.5 %, computer: window operating system, software “ i t “ lathe tool software exclusively designed and developed for measuring the forces in x. y & z direction during operation., software features are :, (a) digital display of forces, (b) graphical display of forces, (c) data recording, printing, transfer to ms excel, dimensions : sensor ( 55 x 125 x 55 mm ) 20mm x 80mm segment provided for fitting in the tool holder of lathe machine, power requirement : 220 v 1 phase, 50 hz, drill tool dynamometer, axial load capacity : 500kgf. torsional load capacity 50 kf. cm. computer: window operating system, software “ dt drilling tool software exclusively designe and developed for measuring axial & torsional forces developed during drilling operation, software features are :, (a) digital display of forces, (b) graphical display of forces, (c) data recording. printing, transfer to ms excel, vernier gear tooth caliper (0.02mm resolution, mi-26), slip gauge complete set slip gauge block set, metric, 87 or 103 block of grade 1 steel, optical flat, optical flat, l=12mm, d=45mm, 0.2um, optical flat, l=12mm, d=45mm, 0.1um, optical flat, l=15mm, d=60mm, 0.2um, optical flat, l=15mm, d=60mm, 0.1um, optical flat, l=0.5". d=1.8", 0.000008", optical flat, l=0.5". d=1.8", 0.000004", optical flat, l=0.6", d=2.4", 0.000008", optical flat, l=0.6", d=2.4", 0.000004", vernier calliper 300 mm, vernier calliper (digital) 150mm, micrometer outside 0-25mm, digital micrometer (25mm, 0.001mm resolution), journal bearing test rig, description: the apparatus consists of a plain steel shaft excavated in a bearing and directly driven by a fhp motor. the bearing is freely supported on the shaft and scaled at the motor end. the speed of the motor is controlled by the speed control uniy. manometer is mounted on bearing to measure the pressure at different position around the circumference, bearing is free and can be adjusted at any position of circular scale. the bearing can be loaded by attaching weights to the arm supported beneath it., technical details:, journal : diameter 50 mm bearing : diameter 55 mm weights : 4 weights, motor : variable speed fhp motor, control panel :

Central Government/Public Sector

CTN :41489566

06 Oct, 2025 1.00 Crore

Noida - Uttar Pradesh

Tender For open tender document for e-procurement of laboratory equipment (soil, aggregates, cement, reinforcing bar, concrete test equipment, water, geo-textile and geogrid) for material testing laboratory of iahe - soil, unconfined compressive strengthcompression device with digital load frame: hydraulic proving ring, dial gauge vernier callipers, timer, oven, weighing balance, shear strength vane shear apparatus, grain size analysis as per is:2720 (part- iv)pipette apparatus (i) sampling pipette (ii) glass sedimentation tubes (iii) weighing bottles (iv) deleted (v) stirring apparatus (vi) sieves -2mm, 425umm , 75umm is sieves (vii) deleted, specific gravityhydrometer apparatus: two 1000 ml graduated cylinders, dispersing agent solution containing sodiumhexa-metaphosphate, dessicator and centimetre scale., shrinkage limit testfull set of equipments 1.) evaporating dish of porcelain, 2.) spatula and straight edge, 3.) balance-sensitive to 0.01 g minimum.4.) shrinkage dish. circular, porcelain or non-corroding metal dish, 5.) glass cup. 50-55 mm in diameter and 25 mm in height,6.) glass plates. two, 75x75 mm one plate of plain glass and the other prongs, 7.) thermostatically controlled oven,8.) wash bottle containing distilled water, 9.) graduate-glass, with capacity of 25 ml. 10.) mercury., sand equivalent value(i) graduated cylinder (ii) irrigator tube (iii) siphon assembly (iv) weighted foot assembly (v) measuring can (vi) sieve -4.75mm (vii) funnel (viii) 4- litre bottle (ix) flat pan (x) timing device (xi) sand equivalent shaker, ph test -electronic method(i) ph meter (ii) digital balance 300 gm capacity-sensitive 0.001gm (iii) 100ml glass beaker -3nos. (iv) volumetric flask-500ml -nos. (v) wash bottle-100 ml (vi) mortar with rubber covered pestle, aggregates, polished stone value (i) accelerated polish machine mounted on firm ,level and non resilient base of stone or concrete (ii) road wheel (iii) means for rotating road wheel (iv) means for bringing the surface of a rubber-tyred wheel of 20 cm diameter and 5 cm breadth to bear on the stone surface of the road wheel with a total load of 40 kg. (v) means to feed the sand and water at a uniform rate (vi ) means to feed the emery powder and water at uniform rate (vii) friction tester: is: 2386 part 4 as per specification of rrl uk (viii) 25 kg hard siliceous sand (ix) emery powder 5 kg, alkali aggregate reactivitymortar bar method: scales, weights, sieves, glass graduates, specimen moulds, mixing bowl, tamper, trowel, containers, length comparator, alkali aggregate reactivity chemical method:1. electronic balance2. pulveriser3. reaction container, reagents, glassware, petrographic examination 1. geological hammer2. petrographic microscope3. screen confirming to is sieve4. digital balance5. portable handheld cutting machine6. hand lens7. glass sides etc., deleterious material & organic impuritiessedimentation pipette: a watertight screw-topped glass jar, 1000 ml measuring cylinder, chemicals, containers, sieves, cement, soundness (autoclave apparatus)graduated glass cylinders, moulds, autoclave, length comparator, compaction (mortar cube vibrator), fineness (blaine air permeability apparatus), ph meter ( 2 in nos.), reinforcing bar (steel), reinforcing bar (steel) universal testing machine,to determine unit weight, yield strength,, proof stress, ultimate tensile strength, % elongation, bend and re-bend test, concrete test equipment, vibrating table 1mx1m(full set of equipments), needle vibrator ( 2 in nos.), permeability, dry shrinkage (shrinkage apparatus) ( 2 in nos.)(full set of equipments), air content (air entrainment meter apparatus)(full set of equipments), durability (rapid chloride ion permissibility apparatus), depth of penetration (water permeability apparatus) ( 2 in nos.)(full set of equipments), water, physical analysis of water, geo textile and geogrid, pull-out resistance of geotextile /geogrid

CTN :41665666

11 Sep, 2025 NA

Ramgarh - Jharkhand

Tender For repairing of equalizer bar and cutting edge, end bit center plate and under carriage (both side) for bd155 dozer sl no. 13609 at parej east ocp, hazaribagh area.

CTN :41602577

11 Sep, 2025 NA

Barnala - Punjab

Tender For supply of impact testing machine charpy and izod , digital torsion testing machine , digital spring testing machine , rockwell cum brinell hardness tester , universal testing machine , wheel balancing machine , abs system trainer , electric vehicle kit , diesel fuel supply system , mpfi, four stroke four cylinder petrol engine test rig with eddy current dynamometer , model of mpfi system , model of crdi system , metallurgical microscope , metallurgical cut off machine , polishing machine , spark test apparatus , tool maker microscope , magnetic v block , angle deckor with set of angle gauges , profile projector , screw thread micrometer , sine bar , gear tooth vernier , sand mix muller , hand rammer , pneumatic rammer , shaper , milling , power hacksaw , circle cutting machine , edge folding machine , foot shear machine , digital multimeter , portable digital power factor meter , dc regulated power supply , portable digital wattmeter three phase , analog multimeter , digital lcr meter , digital clip on meter , current transformer , potential transformer , digital earth tester , portable digital power factor meter, single phase , portable digital frequency meter , digital flux meter , analog megger insulation tester , digital megger insulation tester , variac single phase , variac three phase , stroboscope , synchroscope , single phase resistive load , three phase resistive load , sliding rheostat wire wound , lte mobile trainer kit , am modulaor demodulator kit , psk modulator demodulator kit , qpsk modulator demodulator kit , am transmitter kit , arduino kits with modules , trainer board to study the effects of negative feedback on the amplifier characteristics , trainer board of two stage transformer coupled amplifier , trainer board of two stage direct coupled amplifier , trainer board to study characteristics of class a amplifier , optical fiber splicing machine , optical time domain reflectometer , pcb etching machine , pcb drilling machine , oil fired tilting type furnace impact testing machine (charpy & izod) with maximum capacity= 300 j for charpy 168 j for izod maximum scale graduation = 2 j, digital torsion testing machine with maximum torque capacity= 100 nm and lc 0.01 nm, digital spring testing machine with maximum capacity= 100 kn measuring range = 0- 100 kn load resolution= 5 n resolution of piston movement= 0.1 mm, rockwell cum brinell hardness tester with manual load selection and automatic zero setting dial gauge, universal testing machine with max capacity 100 kn load range: 0 100 kn load resolution: 2 n ram stroke: 150 mm, wheel balancing machine with weight of rotor= 0.5-10 kg max. weight on each pedestal= 7.5 kg max. diameter of rotor over bed= 600 mm, abs system trainer with four two wheels with wheel sensors and abs hydraulic actuator (modulator) unit which is controlled by the on-board computer system (ecu)., electric vehicle kit with ev controller, motor used in electric vehicle, battery used in electric vehicle, on board charger dc to dc converter,ac complete kit, transmission system etc, diesel fuel supply system with training board tank, the fuel transfer pumps, filters, injection pumps and the injection nozzles., mpfi, four stroke four cylinder petrol engine test rig with eddy current dynamometer, actual working metallic model showing various parts of mpfi system, actual working metallic model showing various //bid details 2 / 58

CTN :41237196

15 Sep, 2025 NA

Gorakhpur - Haryana

Tender For corrigendum : supply of profiling of icf type coach bus bar cover as per annexure -1 bus bar cover for icf t ype coach as per is :2062 and having red oxide coating 1. dimension of bus bar cover down side (480 x 4 30 x 3 ) mm thickness 2. dimension of bus front cover (495 x 245 x 3)mm thickness .note-all welding area and edge must be properly grinded [ warranty period: 30 months after the date of delivery ]

CTN :41267750

08 Sep, 2025 NA

Multi City - Andhra Pradesh

Tender For corrigendum : procurement of spares (boiler cds tubes)for pressure parts of units-5&6 boilers - water wall tube od 63.5x5.6mm sa210 gr c, cds fg tube od38.0x4.0mm, itsh tube, fin flat of size12.7x6 mm (edge bar)material is carbon steel for fin welding between tube to, ring;type:c-seal;inside diameter:126mm; outside diameter:137

State Government

CTN :41567128

17 Sep, 2025 NA

Nawabganj - Uttar Pradesh

Tender For supply of air blower. make - bosch or similar brand, model - professional gbl 650 , l handle 3by4 inch square drive 2753. make- taparia or similar brand , joggle fish plate for uic 60 rail , torque wrench with ratched mechanics 70 nm to 340 nm. , portable track gauge calibration bench for sg 1435mm , p. way workshop kit. model tk-1 , p. way workshop kit. model tk-2 , rail wear measuring gauge rwg 2-02. , mechanical tool box for store work. make - taparia or similar brand , phawarh steel 215mmx230mm, 1.2 kg weight confirming to is 1559-1986 , hammer - 1 lb , hammer sledge - 5 kg , hammer keying - 5 lbs confirming to is 15841 , rail dolley for sg 1435mm. suitable for transporting rail and concrete sleeper , hammer drill machine with drill bits. , hand grinder 100mm. make - bosch or similar brand, model - professional gws 600 , tong rail for lifiting 60 kg rail, confirming to is 6000 of 1971, drg. no. y-25 , t-handle 3 by 4 inch sq. drive, no. 2733. make - taparia or similar brand , straight edge 1 mtr, pie or similar brand , special emergency kit for attending rail fracture , straight edge 10 cm. , c - clamp. make - pujara engineers or similar brand , tappered gauge. material - stainless steel , pick axe with handle , steel pipe wrench 610mm 24 inch length width 30 mm. , 12 inch by 30 cm steel ruler 1 mm thickness , double hexa deep socket 3 by 4 inch drive 39 mm size. , socket 3 by 4 inch sq impact deep 36mm size. , rail roller heavy duty for leading of rail panel. , rail jumper 2 m long. material - copper , tommy bar confirming to is 704 , rail thermometre magnetic base pen type , electronic toe load measuring device. , retro reflective banner flag with clamps , halogen lamps with stand 500 watt , handle for keying hammer. size 70cmx4.5cm , handle for wooden phawrah. size 80cmx4.5cm , hand bambo for rake ballast. size 1.75mx4.5cm , continuous rail thermometer pie or similar brand , impact wrench. make - makita or similar brand, model - tw1000 , j clamp for ballastless track. make - pujara engineers or similar brand , taparia or similar brand bench vice fixed base 100mm //bid details 2 / 36

Central Government/Public Sector

CTN :41567566

15 Sep, 2025 25.00 Lacs

Gorakhpur - Uttar Pradesh

Tender For supply of love retractorstraight5mmblade , dura protector straight and curved 4mm 6mm blade , nerve hook , carpener gouge 5mm , carpener gouge 6mm , carpener gouge 8mm , self-retaining retractor with deep blade charnley , flexible shaft with drill bit 3.2 mm length 6mm , femoral head holder , bone cutting forceps link 75-3852 length 210mm double action slightly forward angled jaws , walton hemilaminectomy retractors link 75-2607 or 12 right length - 170mm , walton hemilaminectomy retractors link 75-2607 11 eft length - 170mm , intervertebral disc rongeur double action jaws angled forward parallel cut link 75-386103 240 mm , bone rongeur extra delicate jaws double action slightly curved jaw wd- 2x4mm l-230mm , lamina spreader straight, bar ratchet length 280mm link 75-263301 , alligator rongeur straight concave cup jaws with serrated edge length 130mm , kerrison rongeur up cutting, 50deg angled jaws with ejector length 200mm jaw size 2.0x2.0 mm , kerrison rongeur up cutting, 50deg angled jaws with ejector length 200mm jaw size 4.0x5.0 mm , kerrison rongeur up cutting, 50deg angled jaws with ejector length 200mm jaw size 5.0x5.0 mm , kerrison rongeur up cutting, 50deg angled jaws with ejector length 200mm jaw size 6.0x5.0 mm , intervertebral disc rongeur jaws straight l - 200mm jaw width - 1.5mm , intervertebral disc rongeur jaws straight l - 200mm jaw width - 2.0mm , intervertebral disc rongeur jaws straight l - 200mm jaw width - 2.5mm , intervertebral disc rongeur jaws straight l - 200mm 1.5mm width , intervertebral disc rongeur jaws straight l - 200mm 2.0mm width , intervertebral disc rongeur jaws straight l - 200mm 2.5mm width , intervertebral disc rongeur jaws angled downward - 200mm 1.5mm width , intervertebral disc rongeur jaws angled downward- 200mm 2.0mm width , intervertebral disc rongeur jaws angled downward- 200mm 2.5mm width , intervertebral disc rongeur jaws angled downward - 200mm 3.0mm width , intervertebral disc rongeur jaws angled downward - 200mm 3.5mm width , intervertebral disc rongeur jaws angled downward - 200mm 4.0mm width , dahmen osteotome straight length 300mm jaw width - 5mm , dahmen osteotome straight length 300mm jaw width - 6mm , dahmen osteotome straight length 300mm jaw width - 8mm , dahmen osteotome straight length 300mm jaw width - 10mm , dahmen gouge straight outside bevel 300 mm jaw width - 5mm , dahmen gouge straight outside bevel 300 mm jaw width - 6mm , dahmen gouge straight outside bevel 300 mm jaw width - 8mm , dahmen gouge straight outside bevel 300 mm jaw width - 10mm , lexer - dahmen chisel blade straight length 220mm jaw width - 5mm , lexer - dahmen chisel blade straight length 220mm jaw width - 7mm , lexer - dahmen chisel blade straight length 220mm jaw width - 10mm , dressing forceps standard 30cm 12 link ae 110-30 , tissue forceps standard 30cm12 link ae 406-30 , rib shears, sternum chisel 26cm10 14 , suction tip metal 2mm , suction tip metal 3mm , suction tip metal 4mm , gelpi retractor 5 900 , gelpi retractor 6 900 , casper retractor , mc donald retractor , cobb periosteal elevator 10mm , cobb periosteal elevator 19mm , cobb periosteal elevator 26mm , cobb periosteal elevator 32mm //bid details 2 / 45

Ss Bar Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector