Latest ss fastener Tenders | Government ss fastener Tenders

State Government

CTN :45341668

29 May, 2026 NA

Akola - Maharashtra

Tender For procurement of various ss fasteners for tm section at 2 x 250mw unit no. 3 during annual overhaul at tps, paras, mspgcl.

CTN :45329379

16 Jun, 2026 NA

Bandipora - Jammu And Kashmir

Tender For stage contract for supply of workshop/line material as and when required during financial year 2026-27 or till next contract gets finalised - electrical store/workshop items/: as per is standards and kpdcl approved vendors only wherever applicable, bush rods 12mm(lt) of standard make, bush rods 19mm(lt) of standard make, bush rods 25mm(lt) of standard make, bush rods 30mm(lt) of standard make, ht bush for dts of standard make(33/11kv as per requirement and relevant is), lt bush set for 250kva dt of standard make, lt bush set for 63kva dt of standard make, lt bush set for 100kva of standard make, aluminum thimbles 95sqmm of standard make, aluminum thimbles 120sqmm of standard make, aluminum thimbles 185sqmm of standard make, aluminum thimbles 240sqmm of standard make, aluminum thimbles 300sqmm of standard make, soldress clamp for 630kva, soldress clamp for 400kva of standard make, soldress clamp for 250kva of standard make, soldress clamp for 100kva & 63kva, gi channel/angle/flat/clamps of sizes (as per requirement), gi v cross-arm with top bracket including clamp(2 nos), 11 kv gapless surge arrestor,9 kv ,10 ka ,la with polymer housing, stn. type, 11kv go, ab switch 3-phase, 3-pole, 200 amp, vertical type, 11 kv horn gap fuse set 3 phase 200a, 11 kv heavy duty link set (polymer) line type with 6mm copper blade and 02 no. 8ft. gi channel, clamps and nuts and bolts, 11 kv pin insulators (polymer/porcelain) with pins(5kn), 11kv polymeric composite disc insulator 12kv,min failing load 45kn, lighting impulse 75kv positive and 80kv negative, creepage distance 320mm, lt shackle with mukhi clamps including gi nuts & bolts, gi nuts & bolts of sizes with full thread, manilla rope, gi wire 8 swg, suspension/tension clamp with eye hook as per kpdcl standards, insulating piercing connector (10-95sqmm), straight through cable jointing kit for 35/50sqmm ltab, straight through cable jointing kit for 75/95/120sqmm ltab, heat shrinkable outdoor cable termination kit, 50sqmm lt ab cable (3x50+1x16+1x35) sqmm xlpe (1.1kv, 3+1c, al), 35 mm ab (ht) cable (3x35+1x35 mm ) xlpe, dpc aluminium of sizes 13/14/16/18swg of standard make, super enamelled(se) of sizes 13/14/16/18/21swg of standard make, lathoride paper 10 mil of standard make, exchange of 1kg fresh al dpc by scrap dpc, exchanege of 1 kg fresh bush rods by scrap bush rods, lathoride paper 20 mil of standard make, ht paper 3 mil of standard make, hard card board 1/1.5/2/3mm of standard make, fiber tubes of standard make, cotton tape/ nawar of standard make, cork washers (32x12)5mm, cork washers (50x28)5mm, cork washers (110x74)5mm, cork washers (45x20)5mm, cork washers (60x32)5mm, cork washers (70x45)5mm, cork washers (90x50)5mm, cork sheets(24x36) 3 mm, cork sheets(24x36) 4mm, cork sheets(24x36) 5mm, cork strip(40x3) mm, cork strip(40x5) mm, oil seals for 250kva of standard make, oil seals for 100kva & 63kva of standard make, m seal, cotton tap 1" size (length 35 meter), nawar tap 1 size 35 meter long, tape roll pvc, old saree/doti cloth, insulating gum of standard make, aluminum strip of sizes (3/6, 3/7, 4/8, 4/10 mm etc ) of standard make, rubberized cork sheet 4mm thick, 2 feet *3 feet, rubberized cork sheet 3mm thick, 2 feet *3 feet, ht brown paper 3.0/2.5 mil, packing sheet (1mm)press card board 1/2/3mm, synthetic enamel paint grey colour, varnish dr.beck/empire, glass wool sleeves of sizes, fevicol, backlite tubes 1/2 inch,(1mtr length), packing gutties, electrical grade kraft paper,4mil, rubber washers ( m-12 ht oil seal),, rubber washers ( m-12 lt oil seal),, rubber washers ( m-16 lt oil seal),, rubber washers ( m-20 lt oil seal),, rubber washers ( m-25 lt oil seal),, rubber washers ( m-30 lt oil seal),, fiber glass sleeves 2mm, fiber glass sleeves 3mm, fiber glass sleeves 4mm, fiber glass sleeves 5mm, fiber glass sleeves 6mm, fiber glass sleeves 8mm, fiber glass sleeves 10mm, fiber glass sleeves 12mm, fiber glass sleeves 15mm, oxygen cylinder for welding with water c

Central Government And Public Sector

CTN :45208193

05 Jun, 2026 NA

West Champaran - Bihar

Tender For standing order/rate contract for supply of jointing and packaging materials on f.o.r / door delivery and callup basis at hbl plant sugauli, east champaran and lauriya, west champaran, bihar - non metallic graphited jointing sheet, size:- 1500 x 2000 mm, thk - 0.80 mm, style-20. make: champion / spitmaan / rex / spitmaan / klinger., non metallic graphited jointing sheet, size:- 1500 x 2000 mm, thk - 0.50 mm, style-20.make: champion / spitmaan / rex / spitmaan / klinger., non metallic graphited jointing sheet, size:- 1500 x 2000 mm, thk - 3 mm, style-20.make: champion / spitmaan / rex / spitmaan / klinger., high pressure super metallic jointing sheet, size:- 1500 x 2000 mm, thk - 3 mm, style- 54make: champion / spitmaan / rex / spitmaan / klinger., high pressure super metallic jointing sheet, size:1500 x 2000 mm, thk - 1.5 mm, style - 54make: champion / spitmaan / rex / spitmaan / klinger., non-metallic graphited jointing sheet, size: 1500 x 2000 mm, thk - 1.5 mm, style - 20make: champion / spitmaan / rex / spitmaan / klinger., non-metallic graphited jointing sheet, size: 1500 x 2000 mm, thk - 0.75 mm, style - 20.make: champion / spitmaan / rex / spitmaan / klinger., non-metallic graphited jointing sheet, size: 1500 x 2000 mm, thk - 5 mm, style - 20make: champion / spitmaan / rex / spitmaan / klinger., non-metallic, asbestos grease & graphite gland packing, size - 6 mm, style - 1100make: champion / spitmaan / rex / spitmaan / klinger., non-metallic, asbestos grease & graphite gland packing, size - 8 mm, style - 1100make: champion / spitmaan / rex / spitmaan / klinger., non-metallic, asbestos grease & graphite gland packing, size -10 mm, style - 1100,make: champion / spitmaan / rex / spitmaan / klinger., asbestos grease & graphite gland packing, size - 12 mm, style - 1100make: champion / spitmaan / rex / spitmaan / klinger., non- metallic, asbestos grease & graphite gland packing, size - 14 mm, style - 1100make: champion / spitmaan / rex / spitmaan / klinger., non-metallic, asbestos grease & graphite gland packing, size - 16 mm, style - 1100make: champion / spitmaan / rex / spitmaan / klinger., non-metallic, asbestos grease & graphite gland packing, size - 18 mm, style - 1100make: champion / spitmaan / rex / spitmaan / klinger., non-metallic, asbestos grease graphite gland packing, size - 20 mm, style - 1100make: champion / spitmaan / rex / spitmaan / klinger., non-metallic, asbestos grease graphite gland packing, size - 24 mm, style - 1100, make: champion / spitmaan / rex / spitmaan / klinger., metalic grease graphited gland packing (3 mm), style1916make: champion / spitmaan / rex / spitmaan / klinger., metalic grease graphited gland packing (5 mm), style1916make: champion / spitmaan / rex / spitmaan / klinger., metalic grease graphited gland packing (8 mm), style1916make: champion / spitmaan / rex / spitmaan / klinger., metalic grease graphited gland packing (10 mm), style1916make: champion / spitmaan / rex / spitmaan / klinger., metalic grease graphited gland packing (12 mm), style1916make: champion / spitmaan / rex / spitmaan / klinger., metalic grease graphited gland packing (16 mm), style1916make: champion / spitmaan / rex / spitmaan / klinger., metalic grease graphited gland packing (20 mm), style1916make: champion / spitmaan / rex / spitmaan / klinger., non metallic steam joint style 20, 2 mm, make: champion / spitmaan / rex / spitmaan / klinger., high pressure super metallic jointing sheet, style -54, size -3.15 mm, make: champion / spitmaan / rex / spitmaan / klinger., high pressure super metallic jointing sheet, style universal metallic , size-3.15 mm, make: champion / spitmaan / rex / spitmaan / klinger., lp steam joint sheet, size-1.5 mm, style-20, make: champion / spitmaan / rex / spitmaan / klinger., lp steam joint sheet, size-0.75 mm, style-20, make: champion / spitmaan / rex / spitmaan / klinger., lp steam joint sheet, size- 0.32 mm, style-20, make: champion / spitmaan / rex / spitmaan

CTN :45142257

30 May, 2026 15.00 Lacs

Rewa - Madhya Pradesh

Tender For supply of jalpradya and pipe line material nagar prishad hanumana -isi gi pipes (surya/swastik/tata) – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi sockets – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi unions – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi tees – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi elbows – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi bends – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi nipples – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi reducer sockets – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi reducer elbows – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi reducer tees – 2 star rating: 50mm, 63mm 75mm, 90mm, 100mm flanges (2-hole pattern); 50mm, 63mm, 75mm, 90mm, 100mm pvc pipes (10 kg/cm² pressure rating); 3", 4", 6" c.i. bends; 3", 4", 6" c.i. reducer sockets; 3", 4", 6" c.i. reducer tees; 3", 4", 6" c.i. reducer bends; 3", 4", 6" c.i. air valves; 2", 3", 4", 6" c.i. non-return valves; gland packing cord, white lead (safeda), molten lead, jointing compound; heavy-duty plastic taps (1/2"); heavy-duty steel taps (1/2"); rubber rings (3", 4", 6", 8"); nuts & bolts (tvs company, all sizes); pvc tees (2", 2.5", 3", 4", 6"); pvc elbows (2", 2.5", 3", 4", 6"); pvc sockets (2", 2.5", 3", 4", 6"); pvc bends (2", 2.5", 3", 4", 6"); pvc reducer sockets (2", 2.5", 3", 4", 6"); pvc reducer tees (2", 2.5", 3", 4", 6"); pvc reducer bends (2"). 2.5, 3, 4, 6; clamps: 1-1/4, 1-1/2, 2, 2.5, 3, 4, 6; spindle rod (repair): 2, 2.5, 3, 4, 6; spindle rod with nut: 2, 2.5, 3, 4, 6, 8"; pipe wrench (taparia): 10, 12, 14, 18, 24; chain wrench (taparia): no. 36; spanner set (taparia): 4, 6, 8, 10, 12; t-wrench set (taparia); rubber packing; raw rubber; gate valve (isi brass): 1/2, 3/4, 1, 1.5, 2, 2.5, 3, 4; gate valve (c.i.): 1/2, 3/4, 1, 1.5, 2, 2.5, 3, 4; c.i. joint: 3, 4, 6, 8; c.i. sluice valve: 3, 4, 6, 8; c.i. tailpiece: 3, 4, 6, 8; c.i. bend (90 degrees): 3, 4, 6, 8; submersible pump (isi marked): 1 hp kirloskar/crompton (8-stage, 12-stage, 16-stage, 18-stage, 20-stage); 1.5 hp kirloskar/crompton (8-stage, 12-stage, 16-stage). stages: 18, 20 | 2 hp kirloskar/crompton | stages: 8, 12, 16, 18, 20 | 3 hp kirloskar/crompton (t6/t4) | stages: 12, 16, 18, 20 | 5 hp kirloskar/crompton (t6/t4) | stages: 8, 12, 16, 18, 20 | 6 hp kirloskar/crompton (t6/t4) | stages: 8, 12, 16, 18, 20 | 7.5 hp kirloskar/crompton (t6/t4) | stages: 8, 12, 16, 18, 20 | 10 hp kirloskar/crompton | stages: 8, 12, 16, 18, 20 | 15 hp kirloskar/crompton | stages: 8, 12, 16, 18, 20 | ltl panel board: 1 hp, 2 hp, 3 hp, 5 hp, 7.5 hp, 10 hp, 15 hp, 20 hp bch starter ltl (1 hp, 2 hp, 3 hp, 5 hp, 7.5 hp, 10 hp, 15 hp, 20 hp); starter oil; sluice valve (2.5 inches, 3 inches, 4 inches, 6 inches, 8 inches, 10 inches); rubber packing; voltage meter (bch company: 1 hp, 2 hp, 3 hp, 5 hp, 7.5 hp, 10 hp, 15 hp, 20 hp); ammeter (bch company: 1 hp, 2 hp, 3 hp, 5 hp, 7.5 hp, 10 hp, 15 hp, 20 hp); c.i. d-joint (3", 4", 6", 8", 10"); heavy-duty chain pulley (5 ton); main switch ltl (3 hp, 5 hp, 7.5 hp, 10 hp, 15 hp, 20 hp); pvc. pipe wrap (tape) 1", 3/4"; elbows; couplers (sockets) for motor connection 1", 3/4"; vice (thin type) including nuts and bolts; rope 6mm, 8mm; saddle clamps for pipe connections: 315mm, 280mm, 250mm, 225mm, 200mm, 180mm, 160mm, 140mm, 125mm, 110mm; mdpe pipe 1/2"; ferrule 1/2"; nuts & bolts (size 13); tvs clamps 3", 4", 6", 8"; grinder machine; t-wrench 24x27; cutter machine; hammer drill machine; hammer; chisel; axe; hdpe pipe: 110mm, 125mm, 140mm, 160mm, 180mm, 200mm, 225mm, 250mm, 280mm, 315mm; hdpe tee: 110mm, 125mm, 140mm, 160mm, 180mm, 200mm, 225mm, 250mm, 280mm, 315mm; hdpe coupler (joint): 110mm, 125mm, 140mm, 160mm, 180mm, 200mm, 225mm, 250mm, 280mm, 315mm. reducers: 280/250 mm, 250/225 mm, 225/200 mm, 200/180 mm, 180/160 mm, 160/140 mm, 140/125 mm, 125/110 mm; bands: 110 mm, 125 mm, 140 mm, 160 mm, 180 mm, 200 mm, 225 mm, 250 mm, 280 mm, 315 mm;

Central Government / Public Sector

CTN :45117980

28 May, 2026 NA

Kazipet - Telangana

Tender For supply of set of ball valves suitable for bhel make traction converters. set consists of 2 items as follows. (i) 2 way ball valve with astm a351 gr. cf8 (ss304) investment cast body with ss304 ball, stem, gland, ptfe seats and seals and cs handle flange drilling as per ansi b16.5 std full bore class 150# single pc design. size/thread:25nb(1 inch).---10 nos./set. (ii) 3 way astm a351 gr. cf8 investment cast ball valve with ss304 t port ball, stem gland, ss304 nuts, ptfe seats and seals, cs handle, flange drilling as per ansi b16.5 std. with third side screwed end bsp thread. 2 seat single pc design class 150#hex plug in ss304 will be provided for iii side with buna- n 'o' ring ss304 extended pipe of length 135mm excluding male thread length and class 150# flange duly fitted to valve shall be provided. ss304 fasteners shall be used for valve fitting. size/thread:25nb(1 inch).---10 nos./set. make: kavaata valves or 2l engineers or equivalent. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :45267981

10 Jun, 2026 NA

Surendranagar - Gujarat

Tender For supply of various type of ht/ss fasteners for sps, surendranagar.

State Government

CTN :45230610

21 May, 2026 NA

Akola - Maharashtra

Tender For procurement of various ss fasteners for tm section at 2 x 250mw unit no. 3 during annual overhaul at tps, paras, mspgcl.

CTN :45024720

26 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of stud titanium m 42 x 260 , washer titanium size 12 , stud titanium m 36 x 190 , nut titanium m 24 , nut titanium m 14 , handle , brass , chest or lifting 4 , stud titanium m 30 x 190 , lip piece scupper discharge diameter of pipe 5 no no of screw6 , decelerating unit for 0413/9709257 , valve grinding paste coarse , allu.alloy pop revit 2.3mm x 50.5mm , packing material hemp 7/8 (22.2mm) square , bushing rubber 2 unit type k , 180-360 kgs(soft) , neoprene rubber sheet thick 12.5mm (1/2) width 1mtr , neoprene rubber sheet 9.5mm (3/8) width 1mtr , rubber beading for ramp well 59 x 10 cm for trv , mount resilient typep7d(1542kh)mkll shock/vibration mounting , lip piece scupper discharge dia pipe 2 no of screw 3 , gasket asbestos joint steam & water drum 406.4x25.4x4.80mm , paper gasket oil proof jointing , pin drop nose c/w key chain and s books 7/16 d , pin drop nose c/w key chain and s hooks 3/4 d , hydraulic door closer , mortise lock 6 lever open-in right hand , pad locks iron galvanised (65mm) 2-1/2 , nails steel wire brad swg17 length 3/4 , hasp staple steel 125mm , hasp & staple 6 , padlock iron galv 4 levers with male keys 40mm , glip butterfly tapped 3/4 gun metal for hatch covers , nut butterfly nb open type m6 , nut butterfly nb close type m6 , washer titanium size 10 , stainless steel counter sunk screw (10x1.50x35mm) , packing hemp 1/2 square (12.7mm)

CTN :45226853

29 Jun, 2026 NA

Patiala - Punjab

Tender For supply of battery set (ni-cd) to clw spec. no. clw/es/3/0030 alt.- e, and str no. clw/2025/eldo/e/str/202 rev. 1 (one set comprise of 02 boxes, each box having 13 blocks with 03 cells each). note: 1. the tenderer should provide all the connecting terminal wires and other accessories required for batteries as per list of spare and accessories with ni-cd battery at annexure-c. 2. the ss fasteners should be procured from approved sources of clw vendor list only (uvam vd: 2100233) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45183365

26 May, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of set of ss fasteners consisting of (1) ss hex head screw- m6x25 mm as per is 1364 92,pt2, (2) ss nylock nut m6 is 7002-1991 and (3) ss punched washer a 6.6 as per is 2016-2021 note (one set item consist of 1 sets each) [ warranty period: 30 months after the date of delivery ] ]

Ss Fastener Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government / Public Sector

State Government

State Government

Central Government/Public Sector