Latest ss fittings Tenders | Government ss fittings Tenders

corporations/Associations/Others

CTN :45328177

05 Jun, 2026 62.00 Lacs

Kaushambi - Uttar Pradesh

Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on turnkey basis under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of centralised materials, 11 kv switch gear 600/300/5a 350 mva i/c, 11 kv switch gear 200/100/5a 350 mva o/g, 11 kv 3x300 mm2 xlpecable, 11 kv 3x120 mm2 xlpecable, 24 volt battery, 24 volt battery charger, pcc. 8.5 mtr. long for feeder, 11 kv tpmo switch with fixing clamp, 11 kv top channel, 11 kv dropper angle, earthing complete, stay set complete, 11 kv polymer pin insulator, 11 kv polymer disc insulator, 11 kv disc fiting, 33 kv control panel t/f, acsr weasel conductor, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as join

CTN :45326589

09 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of equipment items - dc motor:type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder: bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel supply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv):type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly :type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips lock nuts end covers mounting: bench-mounted / frame-mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit :the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven).

CTN :45338776

29 May, 2026 NA

Malda - West Bengal

Tender For supply & installation of 04 seater cubicle work station table size:750w x 600d x 750/1050ht. (in mm), 45 mm thick panel 1050ht.750 x1050 & 600 x1050,45 mm thick panel 1050ht.p/f of panel based modular workstations of 45 mm thickness with extruded aluminum end post of size 45x16.5mm with continuous vertical locking arrangement for interconnection of two adjacent panels. top trim is of aluminum section of size 45x12mm and snap fitted on its base of size 45x20mm. the aluminum frame work is supported on lower and upper partition block. bottom block is made up of 9mm prelaminated particle board of desired shade which is pasted on 33x25mm thick particle board baton frame, which is properly screwed to end post and bottom electrical race way. upper block is fixed above the table top and is made up of particle battens fixed with 9 mm thick pin board and cloth of desired shade, optionally white board or glazing can be provided instead of pin board. raceway- one bottom raceway is provided as standard for drawing wires along the width of panel. the raceway is covered with aluminum extruded plates from both sides and snap fitted with aluminum extruded raceway clip. the modular switch & socket plates can be mounted & punched onto the raceway panels with easy cable connectivity & accessibility in case of any repairs etc. table tops to be made up of 25mm thick pre laminated particle board. the tops are supported on partition with the help of cantilevers. all work tops fixed at the standard anthropometric working height of 750mm from the ground level & finished with well filleted edges, thus making those users friendly. a circular hole is provided on every w/top to facilitate the easy connection of cpu & monitor wires & is covered with a modular wire manager made in abs. gable end is made up of 18mm pre-laminated particle board of desired shade and screwed to top with help of brackets. used to support w/tops at the exposed ends giving an openness to all workstations, cubicles etc. the keyboard trays are made out of 18mm thk plpb & mounted under the worktop with sliding channels [ warranty period: 30 months after the date of delivery ] ]

CTN :45293922

29 May, 2026 2.58 Lacs

Chandigarh - Chandigarh

Tender For laying and making connection of sewer line for additional toilets at ground floor in house no. 2501 to 2498 (type 9) to main mc sewer line and other allied works sector 19-c, chandigarh. (ch. to 2216 (n.p) maintenance and repair)

State Government

CTN :45287207

10 Jun, 2026 1.68 Lacs

Multi City - Chhattisgarh

Tender For estimate for 01 no.load enhancement from 10 kw to 30kw ndlf connection for gopal ban goshwami supply of kumar ban goshwami (b.p. 1009561412) at near mela ground katghora under katghora town dc under katghora sub dn of onm dn katghora

Central Government/Public Sector

CTN :45318967

04 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For tender for supply of ms and ss fittings lot 6 part 3 - 15 nb ms slip on flange drg no 2092030000 , 40 nb ms slip on flange drg no 2092030000 , 50 nb ms slip on flange drg no 2092030000 , blank flange 40 nb drg 2092430000 , 450nb slip on flange din nd 16 , 32 nb ms flange for flared cucu ni pipe drg 2092071500 , 40 nb ms flange for flared cucuni pipe drg 2092071500 , 50 nb set in flange drg no 2092160000 , 15 nb set in flange msgalv drg no 2092160000 , 40 nb set in flangems galv drg 2092160000 , 50 nb set in flange msgalv drg 2092160000 , 65 nb int shore conn flange fig no 3 , 40 nb bhddk piece drg no 2092180000 , 15 nb msgalv bhddk piece din nd10 drg 2092180000 , 90 deg 40nb sch40 ms seamless elbow butt weldeable r 15d , 90 deg ms seamless bend r 15d but weld ty 50 nb sch 40 , 15 nb ss flange as per drg 2092038100 , 25 nb ss flange as per drg 2092038100 , 32 nb ss flange as per drg 2092038100 , 80 nb ss flange as per drg 2092038100 , 8 od water tight dkbhd fitting drg no 2092008001 , tech spec for ss 6 od water tight dkbhd fitting , 50 nb filling funnel ss drg 2092340100 , ss 12 st male union connec other end suit to 15 nb pipe , 8 x 6 od pipe reducer connector ss304 with reducer union

State Government

CTN :45317538

01 Jun, 2026 75.12 Lacs

Hyderabad - Telangana

Tender For carrying out electromechanical works in connection with renovation of the hon ble chief minster chamber, adjacent minister chambers and delegate chambers with connected rooms and corridors at ground floor of annex building in the p/o telangana legislature buildings, hyderabad

Central Government/Public Sector

CTN :45325964

03 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap and unserviceable condemned mix m.s. coach cutting items & various types of similar items such as , body side door m.s., p.o.h. coaches realised corroded pieces,air brake,clamp,pipe pin,m.s. door of battery box ,m.s.ventilation door,foot plate,ice box,m.s. spring,m.s. angle,and m.s. lader with rubber coating,coach cuttings, coach doors , seat frames , bearth/seat frames, light head stock cuttings, train lighting fittings,, side lamps lamp hand signal, fittings, tail lamp fittings, cft/tl light fittings, ictp/ icfp empty swich boxes tail lamps, tube light fittings, tube light jali, fan blades, fan jali, fan guards fan ribs, fan rings, empty power pannels, signal platform, destination board, valley board, letter board,ms signal base, loc, inercooler, nut bolts and other hardwares, m s furniture.m s wheel stand,window grill, ms measuring cans, tins, racks, break pipes, silencer of tower wagon, dust bin, ms pipe and cut pcs. of ms pipes, rods, ms bars released from broken constructin, compressor spring, wire /coil springs, ms rope wire, pcs. of brake beam pipes, stands, m s ferrous light junk kachra related scrap i.e ms angles, chanels, flats pcs. of cable racks/laders ms brackets, dust bin stand, tin fuse box, fire extinguisher, empty glow sign boards, empty electrical pannel, ms stand, oven, earthing patti, empty cable tray, fly catcher, galvanized patra / sheet and their cut offs, cut pieces of ms cupboards, rack etc, plain/ corrugated / toughened sheets and its cut pcs. such as strips, patties, patties, patra, rings, coils, boxes, ms brake control cover, patra, angle, small springs, pins, wire, electric point, shunt signal unit and post. signal ladder , location box, earth electrode , signal post and base , signal unit, point roddings , junction route indicator and cut pieces in mijscellaneous, coil, collapsible doors and shutters and their parts/cut offs, grills , channel grills, compound /bridge jali with or without frame, ms fencing and their parts, fencing patties, angle pcs., frames,wire mesh, g.i./ms pipes and tubes , tubes and their cut pcs, damaged gi/ ms pipes/ rods/ tubes and their pcs. , ms/galvanised boxes, junction box, switch boxes, empty convertor, payary (steps), filters, rings, nut bolts, u clips, pipe pin, gate m/c dismentled, liquid container, damaged video boxes and their cut offs, crt cabinet, location boxes , jumper, jumper box,ground connections , basket steel, water cane/ material carring trolley,steel baskets, containers, trays, frames, stretchers, nets/ jali , released ground connection, halogen, panto pans, compressor spares, dust guard, air filters and filter covers, ms/gi duct and its parts,insulating armature of signal cable, hand lamps, side lamps, signal lamps petromax, hs lamp, clamps, signal post,signal platform, signal base, ms/ gi wire/ coil, funnels, wall protectors, boxes, iron bar pcs released from broken construction , desmantelled weighing machines parts/ covers etc. ms pipe with or without ci attachment, bins, plates, rings, spares/ parts /body of weighing machine , platform weighing machine and its parts, pressure switches and other switches , signal parts, location boxes,panel board,fuse box,mdb board,pedestial for lc gate and their cut parts and other ferrous miscellaneous scrap items with or without minor nf/ss/ wooden / rubber / rexine attachments of sorts and sizes, broken and damaged, u/s for rly. use, excluding items: rail and rail pcs., axles and axle pcs., wheel tyre and pcs., cam shafts, helical springs, bolster springs, buffer plungers, face plates, axle box housings/ casings, brake beams, fish plates, screw couplings/draw bar hooks, break beams, reservoir tanks, st sleepers and other various types of similar ms items etc. note: 1. hammering/ pressing/ cutting is permitted for easy loading only, 2. if found any non-ferrous item will not be delivered (qty approx)

Central Government/Public Sector

CTN :45326075

05 Jun, 2026 NA

Kota - Rajasthan

Tender For auction sale of depot ferrous scrap - 98050126 scrap ferrous material consisting of various type of nut, bolt, rivets, peices of angle, channel, m.s. bracket, draft gear spring washer,m.s. liners,piston, door hinge, door hinge foot, small cut peices of tie bar, beater, clamp, pully side bearer housing, brake wear plate,side bearer housing top and bottom, knuckle pin, knuckle thrower, dog spike, g.i. ohe fitting, bk hanger lever, fish bolt, parts of ctrb bearing, liner, small p.way fittings, bk shoe key, s/pin, pu pad, axle box cover, and inner outer rings, m.s. pins, s/plate, peices of s.s and m.s. pipe, peices of huck bolt fresh cutting, push rod, cbc uncoupling rod, cbc lock and cbc components, safety loop, bk shoe head, released valve, cut peices of m s sheet, plates, buckles, ohe fitting, peices of ms rounds, equalizing lever, bridle bar, shackle stone, shackle, stricker casting wear plate, yoke pin, side bearer liner plate, hand brake wheel, suspension socker, g.i. nut bolt, tension device, main pull rod, cbc uncoupling rod, yoke pin, c.c. pad plate, m.s. round, bk shoe head, bk beam plate, reservoir tank patti, door catch, door check spring, annual repair supporting bracket, signal ground connection parts and other small wagon components and other ferrous items if any.