Latest ss mesh Tenders | Government ss mesh Tenders

Central Government/Public Sector

CTN :45475154

07 Jul, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For corrigendum : repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and get

CTN :45690462

03 Jul, 2026 20.67 Lacs

Allahabad - Uttar Pradesh

Tender For a/r & m/o to gpra colony at sulem sarai, begum sarai & cpwd staff colony at jayantipur, allahabad during 2026-27 (sh: providing and fixing wooden wire mesh window, glass window and repair work like wiremesh changing window glass fixing etc. at kendranchal colony pocket-i, ii, iii begumsarai colony & cpwd staff colony, prayagraj)subwork/packages:maintenance work

State Government

CTN :45654953

03 Jul, 2026 NA

Raigad - Maharashtra

Tender For work of repair / rectification of louvers flap assembly and gi box holding flap assembly along with installation of modified gi wire mesh to gt luwa cooler fans of unit gt 8 at gtps uran.

CTN :45369161

02 Jul, 2026 2.83 Crore

Birbhum - West Bengal

Tender For corrigendum : short term measure through placement of gabions by mechanically woven double twisted hexagonal wire mesh boxes filled with sand filled hdpe bags and repair of existing gabions at the downstream bed of tilpara mihirlal barrage

Central Government/Public Sector

CTN :45637845

25 Jun, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - junk (low qualtiy) 98090800 m.s. junk / kachara (low quality): scrap released consisting mainly of low-grade, assorted and mixed mild steel junk (kachara) generated from various railway activities including pressed and empty paint/oil drums,fire extinguish with or without powder,grease manual pump,fan blade,tubelight patti,small paint drum (may be tin ), damaged filters and filter frames, ducts, ms sheet, grills, sliding channels, scrap panels, broken housings, earthing wire,galvanized iron sheet, cabinets and almirah parts, lockers, racks, benches, trays, boxes, covers, frames, brackets, ladders, pipes, rods, bars, wire mesh, mesh guards, grills, scrap sheets, angles, channels, booms, posts, discarded machine parts, miscellaneous fabricated structures, signal and electrical cabinets, dp/mldb boards, relay/telecom racks in scrap condition, cable trays, junction/location boxes, display boards, indicator housings, transformer fittings, tu/dac/aws covers, brake related scrap, air filter assemblies, pantograph related scrap parts, trolleys, damaged hand tools, crane and track machine scrap parts, hydraulic components in scrap condition, racks, ballast tools, scrap furniture,ci pipe , bed and seat frames, cupboards, doors, bins, chains, nuts, bolts and mixed hardware; material is highly rusted, bent, broken, corroded and mixed with mud, dust, grease, paint or oil residues and environmental deposits; all items are unserviceable, obsolete and beyond economical repair (ber); minor non-ferrous, rubber, plastic, insulation, rexine or wooden attachments may be present without segregation; this lot is low quality junk kachara, not identifiable item-wise and not fit for railway use; no claim shall be entertained regarding quantity, composition, quality or recoverability,sold strictly on %u201cas is where is%u201d basis; loading by purchaser, mechanized loading permitted, mud, rust, debris and all remains shall form part of the lot; custodian: dms/scrap/pardi

Central Government/Public Sector

CTN :45365887

25 Jun, 2026 30.00 Lacs

Kamrup - Assam

Tender For corrigendum : repair/ replacement of roof sheet, false ceiling, joinery, steel window, ventilator, gi tubing, pvc water tank, glass panes, wire mesh and other allied work at depot/ adm area of 14 fad and md accn in the aor of age b/r i under ge narangi

Central Government/Public Sector

CTN :45575974

19 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of one c/s pillar assembly consists of 1.pillar assembly to drg.no.753-4-3-014, alt-nil - 1 no, 2.pillar assembly to drg.no.753-4-3-004,alt-a - 9 nos, 3.pillar assembly to drg.no.753-4-3-016, alt-nil - 1 no, 4.pillara ssembly to drg.no.753-4-3-018, alt-nil -1 no, 5.pillar assembly to drg.no.753-4-3-010,alt-nil - 4 nos, 6.pillar assembly to drg.no.753-4-3-020,alt-nil - 1 no, 7.pillar assembly to drg.no.753-4-3-012, alt-nil - 5 no, 8.ss mesh assembly for partition frame drg.no.ls10270,alt-a - 9 nos, 9.channel ls10253,alt-b - 9 nos. please visit icf vendor portal for downloading drawing https://vp.icf.gov.in/vendtendordetnew.php using key: 0726txg7nqy2280 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45313964

23 Jun, 2026 30.00 Lacs

Budgam - Jammu And Kashmir

Tender For corrigendum : ge (af)/sgr-26/2026-27 repair / replacement of wooden door, box type windows, wire mesh door, windows and connected works at smq area under ge (af) srinagar

CTN :45562267

22 Jun, 2026 NA

Thanjavur - Tamil Nadu

Tender For purchase of ss mesh

Central Government/Public Sector

CTN :45471011

12 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of set of item requires for ra-088770, details as per the annexure-i attached - bib cock flange big, 1.5" flexible ss extension, 1/2" flexible ss extension, 3/4" to 1/2" adaptor, antique sliding door concealed handle, antique toilet knob, big handle (9") brass, make desecure or similar, bolt extractor set, brush holder make: jaquar or similar, ceramic wash basin with full pedestal, white, make: jaquar or similar, ceramic western commode with ceramic flush tank- two piece colour-white, with pvc pipe for commode chute (2 mtr long, jaquar or similar, commercial ply 19 mm, concealed type handle for sliding door, concrete drill bit 4mm, corner shelf with bracket, jaquar or similar, cup washer (500 nos. pkt), curtain hook, curtain rod & holder, steel finish (1 ft), decorative thermosetting synthtic resin bonded laminated, sheet (lp sheet) as per sample, door closer heavy duty, door pusher, godrej or similar, drawer sliding channel assembly, exposed part kit of concealed stop cock con-chr-069 ftk, fancy barrel bolt 4" antique, fancy barrel bolt 6", make desecure or similar, fancy coat hook, make desecure or similar, fancy i hook 4", make desecure or similar, fancy mirror 18" x 18", fevicol m/s pidilite or similar, full turn conti spindle 1/2", hand shower 95 mm hsh-chr-1737 round, health faucet ald-563 of jaquaror similar model of hindware/grohe/plumber or hatim, heatx (adhesive), m/s pidilite or similar, hinges ss 4x12, magnet for cupboard, many types of screw (1 box = 500 screws), metropole flush valve dual flow 32 mm flv-chr-1085, mixer cock with hand shower assembly con-0281kn of make jaquar or similar model of hindware/grohe/plumber or hatim, hand shower should be suitable for supplied mixer cock with 2 mtr flexible pipe, mortise lock, ms bush, normal mirror 18" x 18", nrv 15mm, over head shower ohs-chr-1605 square 150x150 mm, plain shelf (big) with bracket, jaquar or similar, plain shelf (small) with bracket, jaquar or similar, pvc connector pipe (3 feet long), pvc pipe dia 100 mm 10 feet with pvc coupling for commode outlet, reduced body of concelaed stop cock ald-chr-069 ft, ss extension 1", ss extension 2", screw with cap (mirror screw), sink cock with swinging con-chr-347knm, sliding door rolling wheel assembly, small handle (6") brass, make desecure or similar, soap disc holder, jaquar make or similar, soap dispenser, make: jaquar or similar, ss angle stop cock with flange (round knob), model con-059 of jaquar or similar model of hindware/grohe/plumber or hatim, ss drain jali, ss drain jali for wash basin sink with circular hole, ss hinges 3", ss hinges 4", ss long bib cock for kitchen sink model no con-107kn of jaquar or similar model of hindware/grohe/plumber or hatim., ss long bib cock model con-107kn of make jaquar or similar model of hindware/grohe/plumber or hatim., ss mesh connector pipe (1.5 feet long), ss wash basin mixer cock with all accessories model con-167kn of jaquar or similar model of hindware/grohe/plumber or hatim, stainless steel coating on berth handle, stop cock with flange (horizontal) con-059kn of jaquar or similar model of hindware/grohe/plumber or hatim, teak wood bidding as per sample, thermostatic shower panel with rain fall shower head -adjustable nozzels and tub spout (apple), toilet paper holder with stainless steel flap, make: jaquar or similar, towel holder/rack 600 mm long, make jaquar or similar, two way bib cock model no-con-041kn of jaquar or similar model of hindware/grohe/plumber or hatim, wall mounted bath shower con-sha-483 of make jaquar or similar model of hindware/grohe/plumber or hatim, wall mounted table bracket, wash basin with pedestal, y strainer 15mm

Ss Mesh Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector