Latest ss valve Tenders | Government ss valve Tenders

Central Government/Public Sector

CTN :41055028

26 Jul, 2025 NA

Golaghat - Assam

Tender For providing of operation and maintenance of other machines and plants - operation and maintenance of other machines and plants - instrumentation contract for miscellaneous instrumentation jobs-10 installation of direct type pressure gauge, temperature gauge, rotameters, flow gauge,etc. including transportation from the wh/iw, necessary tubing, connection etc. but exclusive of supply of materials. 100 nos., 20 installation of direct type pressure transmitter, pressure switch, temperature switch, solenoid valve ( inch to 1 inch), ip converter, thermocouple, rtd, limit switch, position transmitter, vibration transmitter, proximity/ vibration probe, temp. transmitter,speed probe etc. including transportation from the wh/iw, necessary tubing, connection, cable glanding, ferruling, lugging etc. as applicable but exclusive of supply of materials. 320 nos., 30 installation of diaphragm/ remote seal type pressure gauges etc. with accessories including transportation from the wh/iw but exclusive of supply of materials. rating : upto 600# flange rating. 20 nos., 40 installation of diaphragm/ remote seal type pressure transmitter, pressure switch etc. with accessories including transportation from the wh/iw, mounting, connection, cable glanding, ferruling, lugging etc. as applicable but exclusive of supply of materials. rating : upto 600# flange rating. 20 nos., 50 installation of level switch, displacer type level transmitter etc. with accessories including transportation from the wh/iw, mounting, connection, cable glanding, ferruling, lugging/ termination etc. as applicable but exclusive of supply of materials. rating : upto 600 # flange rating. 10 nos., 60 installation of tank level transmitters radar/servo with accessories including transportation from the wh/iw, mounting, gi earthing,glanding,termination etc. but exclusive of supply of materials. 5 nos., 70 installation of instrument control valve with accessories including transportation from the wh/iw, mounting, tubing, connection, cable glanding, ferruling, lugging/ termination etc. as applicable but exclusive of supply of materials. valve size : upto 2"300# 20 nos., 80 cable laying testing of frls armoured power/control/signal cables made trenches,cabletrays, pullthrough pipes or exposed on wall. beam/rakes; trussestie/beam or embedded in floor. unit rates quoted for installation of cables shall be same irrespective of route and method of laying. the rates shall include laying, pulling of cables, proper dressing of cables on cable trays, racks, vertical raceways and supply and installation of saddles, spacers and nylon chord for tying as required, identification tags at strategic points / every 50meter intervals, aluminium clamps with fasteners,etc. cable identification aluminium tags at strategic points/every 50meter interval for identification of cable;etc. complete. the straight through joints/tying with armour in the cables should be avoided and rate includes all leads and lifts from and to yard. meggaring to be done before laying of cables.laying of instrumentation/fo armoured cables/power cables including transportation,dressing , clamping (with aluminium clamp at 600 mm interval), tagging (engraved on ss plates with ss tiebelts), inclusive of supply of consumables like cable tie, aluminium clamp and cable tag : type and size: armoured , od : upto 0.5" ( approx.).exclusive of supply of cables, 22500 meter, 90 cable laying testing of frls armoured power/control/signal cables made trenches,cabletrays, pullthrough pipes or exposed on wall. beam/rakes; trussestie/beam or embedded in floor. unit rates quoted for installation of cables shall be same irrespective of route and method of laying. the rates shall include laying, pulling of cables, proper dressing of cables on cable trays, racks, vertical raceways and supply and installation of saddles, spacers and nylon chord for tying as required, identification tags at strategic points / every 50meter intervals, aluminium clamps with

Corporations And Associations And Others

CTN :41029372

17 Jul, 2025 8.54 Lacs

Delhi - Delhi

Tender For provision of hardware items and allied accessories for diesel engine pump set in electrical and mechanical division najafgarh zone. ee (e and m)-v/ngz/mcd/2025-26/05/01 - providing and fixing of ms black pipe (9.5mm thickness) confirming to is:3589 with required nuts and bolts and packing sheet etc complete as required of dia. 200 mm, 9.5 mm thickness, providing and fixing of ms flange with required nut bolts & packing sheet etc complete as required of 200mm dia. (20 mm thickness), providing and fixing of ms flange with required nut bolts & packing sheet etc complete as required of 300mm dia. (25 mm thickness), providing and fixing of ms reducer 300mm x 200mm, 10mm thick, approx. 0.5 mtr length/required length at site, with suitable size nut, bolt, packing sheet etc. all as directed at site, supply of rubber sleeve made out of natural rubber having 6mm thickness, minimum 24.5cm long suitable for 200mm dia pvc pipe confirming to is 5282, supply of 90 degree upvc bend 200mm for 6 kg-f/cm2, supply of 45 degree upvc bend 200mm for 6 kg-f/cm2, supply of upvc 200 mm od (socket ended) pipe 6kg/sq. cm pressure as per is: 4985/2021, supply of ms bend 75mm, providing & fixing of m.s. bend with required nut bolts & packing sheet etc. complete as required of dia 100 mm short bend c-class, supply of ci foot valve 75 mm, supply of ci foot valve (screw type)100 mm pn 0.2, supply of ci foot valve (screw type)150 mm pn 0.2, replacement of swing type non return valve of ci body with door, bronze to rubber rings confirming to is 5312 (part 1 & 2), pn 1.6 complete as required of size 200mm, supply of ci nipple 75 mm, supply of ci nipple 100 mm, supply of ci nipple 150 mm, supply of ms hose clamp 75mm dia., .8mm thickness, ms sheet width 25mm, complete with suitable size nut/bolts, supply of ms hose clamp 100 mm dia., .8mm thickness, ms sheet width 25mm, complete with suitable size nut/bolts, supply of ms hose clamp 150 mm dia., 1 mm thickness, ms sheet width 25mm, complete with suitable size nut/bolts, supply of ms hose clamp 200 mm dia., 1 mm thickness, ms sheet width 25mm, complete with suitable size nut/bolts, old dhoti, nut-bolt set with washer, 4 soot - 4 inch long, nut-bolt set with washer, 3 soot - 4 inch long, nut-bolt set with washer, 4 soot - 3 inch long, nut-bolt set with washer, 2.5 soot - 3 inch long, nut-bolt set with washer, 4 soot - 5 inch long, nut-bolt set with washer, 1.5 soot - 2.5 inch long, couple tyre 13 no., couple tyre 14 no., coupling plate set along with studs, size 13 nos., coupling traingular set with belt, nut-bolts etc., supply of gland plate for kirloskar make shm 100/26 pump set, supply of gland 12mm, supply of gland 10mm, providing of kirloskar care premium oil 20 ltr can (82.060.10.0.20) for kg 125 ws -3 125 kva, s & f following size of g.i. socket. as reqd. 80 mm

CTN :40939533

15 Jul, 2025 NA

Ganganagar - Rajasthan

Tender For bid to ras supply of nd 2815 003696 piston assy std cw piston rings , nd ixc kr 020204000 piston ring set std 1009817 , ixc kr 34 006 001 0 cylinder liner standard , ixc rh 30533 124 bearing main wide in pair , ixc kr b 041400013 bearing set , nd 5310 238790 washer copper gasket , nd ixc m1 1411 015 053 gasket for cover inspection , nd xc rh yc 17813a thrust washer , nd ixc rh yd 13217 housing oil seal , 5330 382241 seal oil for push rod , nd ixc kr 34 010 03 01 tappet valve valve seal , nd misc 9430034214 nozzle mico dila1505098 with washer , nd misc 1200201958 pump element with nrd , ixc ussr k 201 1306018 gasket fuel pump , nd ixc rh 6yda 22026a connection fuel for filter to pump , nd ixc rh yda 220 147 3 connection fuel complete fuel feed pump , nd ixc rh ydak 995 701 connector fuel injector over flow , ixc mi 9440 030 020 feed pump assy , nd xc mi 9451 037 406 fuel filter element , nd misc 605411880009 lub oil filter , ixc kr 34 185 01 0 pipe flexible for oil pressure , nd ixc rh yda 320035a gauge pressure oil lub , ixc pa 1779985 sending unit oil pressure gauge , nd 1730 001550 bolt banjo , ixc kr 707220 bolt benjo mico no 09 de 005 , nd 5307 001658 stud rocker support , 5307 001390 stud inlet and exhaust manifold m8 x , ixc kr 36 038 01 7 coupling flange , nd ixc 11 181 01 05 01 gauge oil temp 40 deg c 130de , nd xc rh 4yda 49024b set of fan driving belt , nd ixc rh 023003 bolt , nd ixc rh yc 14118 161247 tab washer , nd ixc rh ydak 991 1146 hose for connecting two manifold , 5310 006374 washer tab m 16 ms , nd ixc luc 26210708 bearing commatator end , 5310 007643 nut case m14 x 1point5 bs , nd misc 001100200109 washer for benjo screw , 5306 008139 bolt hex m8 x 1point25 x 18bsen16 , nd ixc mi 9430 031 217 holder nozzel mico , nd ixc kr 37 009 10 0 pipe lubrication 1point0 rocker supply , f lbt 051 clamp pipe , 2530-002474 lever brake , 2530 002323 dia frome chamber , 8010 000128 thinner antichill , 6810 0000 31 soda ashtechnical , 5350 000006 abrasive cloth emery 280x230mm //bid details 2 / 34

CTN :40770202

14 Jul, 2025 NA

Ganjam - Odisha

Tender For bid to ras supply of bandage creppe 15 cm , dressing medicated adhesive 25 cm x 6 cm in single strip pack , dressing first aid unmedicated sterile pack , dressing medicated gauze parafin, 10 cm x 10 cm square, tin of 24 , dressing shell,compressed , dressing, wound care occlusive and hydrocolloid dressing with flexible foam padding for optimum healing 10cm x 10cm box of 5 , pre op adhesive drape 28cmx30cm , pre-op adhesive drape 36cmx40cm , pre-op adhesive drape 50cmx45cm , dressing silicon gel sheet 5 x4.5 , dressing woundcare non adhesive 3 x3 inches , dressing wound care non adhesive 4 x 4 inches , dressing wound care non adhesive 5 x 5 inches , dressing wound care non adhesive 6.5 x 7.5 inches , dressing post-op medicated 6 x 7 cm pack of 100 dressings flexigrid , dressing post-op medicated 10 x 12 cm pack of 50 dressings flexigrid , wool cotton absorbent pkt of 50 gm , cotton wool,absorbent pkt of 500 gm , dressing sterile 8 x 8 box of 3 , gauze surgical, open wove, unmedicated 60 cm wide , lint absorbent, cotton , ostomy,synthetic skin barrier and microporus tape with centre point block flange and drainable pouch with transparent opague odour barrier film and belt tab with stominal clamp 70mm , ostomy paste 57 gms for use as skin barrier in fistula and ostomy cases , ostomy powder 28 gm , coloplast bag no 13986 60mm , pad abdominal swab 25x25 cm with tape 30 cm , pad abdominal swab 40x25 cm with tape 30 cm , surgeons caps disposable , bandage open wove uncompressed 6cmx4cm , tube feeding smooth plastic infant 38 cm long, 8 f with red flexible connector for nasogastric feeding , tube feeding smooth plastic infant 38 cm long, 5 f with red flexible connector for nasogastric feeding , u-drain male incontinence device made of soft, light weight latex sheath size larg 35 mm , u-drain male incontinence device made of shoft, right weight latex sheath size medium 30 mm. , naso gastric tube adult 100 cm long 14g , naso gastric tube adult 100 cm long 16g , naso gastric tube adult 100 cm long 18g , naso gastric tube adult 100 cm long 20g , mdi spacer with mask and fish mouth valve for pedilatrics set , nitrile non sterile gloves small , nitrile non sterile gloves medium , nitrile non sterile gloves large , suspensory scrotal , nitrile non sterile gloves extralarge , disposable lancet for finger prick pkt of 100 , glass marking pen , paper filter round green no 795 9 cm pkt of 100 , slide, microscope, size 75mm x 25mm , urinary leg bag 540 ml , acetic acid glacial analar , antistreptolysin o test latex agglutination principle, complete with control serum , kit for estimation of cpk ck-nac uv-kinetic method . erba , liquor formaldehyde 40 per w v , n95 mask without expirator valve , glycerine ar glycerol , kit for estimation of hdl cholesterol kit erba , cholesterol kit erba , hiv i and ii rapid test kit tridot j mitra 1 x 50 , keto diastix bott of 50 strips , kits for estimation of albumin erba , kits for estimation of glucose kit erba , kits for estimation of total protein erba , kits for estimation of urea kit erba , kits for estimation of uric acid kit erba , kits for estimation of creatinine kit erba , kits for estimation of alkaline phosphatase kit erba , kits for estimation of sgot ast kit erba , kits for estimation of sgpt alt . kit erba , sodium hypochloride solution 10 per , stain methylene blue , troponin t test card , kit for triglyceride estimation erba , kit for estimation of bilirubin erba , kit for estimation of ggt gamma gluteryl transaminase erba , kit for estimation of cpk mb erba , kit for estimation of amylase erba , kit for estimation of ldh erba , rapid card screening for hbv j mitra 1 x 50 , rapid card screening for hcv j mitra 1 x 50 , c r p kit , pt reagent and inr 1 x 5 ml , thoracic drainage catheter size 28f , thoracic drainage catheter size 30f , thoracic drainage catheter size 32f , urine collecting bag with volume meter uro bag with urometer , micropipeete variable volume 10 ul to 100 ul , micropipette

CTN :41056502

21 Jul, 2025 NA

Jalandhar - Punjab

Tender For supply of cylinder piston assy , piston ring set , gasket set complete engine , valve exhaust , valve inlet , carburetor flange washer , carburetor bs 29 , coil ignition , assy winding regulator lh , assy winding regulator rh , side mirror assy lh , light assy indicator front direction

Central Government / Public Sector

CTN :41053559

22 Jul, 2025 NA

Gooty - Andhra Pradesh

Tender For supply of rubber kit for 3 piece design 1 1/4 inch bp/fp angle cock as per ref.7,8,&12 of s.crly.dr g.no.c/els/lgd/pn. eqpt/3/54.set consists of 3 items. 1)flange as per ref.no.7 ,qty=02 nos. 2)valve s eat as per ref.no.8, qty=02 nos. 3) o ring as per ref.no.12, qty=01 nos. as per drg.no. s.crly.drg. no.c/els/lgd/pn. eqpt/3/54 ]

Central Government/Public Sector

CTN :41054819

04 Aug, 2025 5.84 Lacs

Bandipora - Jammu And Kashmir

Tender For supply of polyethylene water storage tank with cover and suitable locking arrangement 500 ltr make sintex or as approved by engineer in charge , providing of hdpe pipes 50 mm dia - 63 mm outer dia make jain or dolphin poly or as approved by engineer in charge , providing iron girder i section of lenth 420 centi meter meter web lenth 150 mm flange- 75 mm web thickness and flange thickness 12 mm or as approved by engineer in charge , providing of hdpe tee 50mm make jain or dolphin poly or as approved by engineer in charge , providing of hdpe elbow 50mm make jain or dolphin poly or as approved by engineer in charge , providing of hdpe union 50mm make jain or dolphin poly or as approved by engineer in charge , providing of gi tank nipple 50 mm isi mark or as approved by engineer in charge , providing of air release valve 50 mm isi mark or as approved by engineer in charge

CTN :41053957

04 Aug, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of spare parts of automatic smoke/fire detection system make- j k exim (as per rdso/2008/c g-04 rev 5.0) 1- datalogger card part no. jk-fsd-1124 qty-02 nos 2- dc/dc convertor (110 v to 24 v dc) part no. jk-fsd-1120 qty- 05 nos 3- electrical cable (each red & black) part no. jk-fsd-1116 qty- 50 mtr 4- aspiration main pipe-21.2 mm part no. jk-fsd-1102 qty-50 mtr 5- aspiration main pipe-15.8 mm part no. jk -fsd-1103 qty-50 mtr 6- brake module card part no. jk-fsd-1130 qty-03 nos 7- charging unit part no. jk-f sd-1121 qty-05 nos 8- air filter cartridge part no. jk-fsd-1131 qty-10 nos 9- prosense relay card part no. jk-fsd-1125 qty-02 nos 10- air filter part no. jk-fds-1101 qty-10 nos 11- prosense display card part no. j k-fsd-1140 qty-02 nos 12- brake valve part no. jk-fsd-1133 qty-02 nos 13- isolation cock part no. jk-fsd -1114 qty-15 nos 14- bp tee part no. jk-fsd-1112 qty-15 nos 15- brake pipe rotary part no. jk-fsd-1154 q ty-05 nos 16- action flasher light part no. jk-fsd-1143 qty-10 nos 17- valve clamp part no. jk-fsd-1115 q ty-25 nos 18- display leds part no. jk-fsd-1127 qty-25 nos 19- brake valve ioh kit-19item part no. jk-fsd -1155 qty-04 nos 20- elbow part no. jk-fsd-1106 qty-29 nos 21- flasher hooter with announcement part n o. jk-fsd-1128 qty-10 nos 22- pipe tee connector fsd-1108 qty-50 nos 23- switch/mcb part no. jk-fsd-11 29 qty-25 nos 24- reducer part no. jk-fsd-1109 qty-25 nos 25- flange part no. jk-fsd -1107 qty-25 nos [ warranty period: 30 months after the date of delivery ]

CTN :41055989

22 Jul, 2025 9.09 Lacs

Kajora - West Bengal

Tender For supply of balance valve bush bronze mf123hpb28 , disc seal seating bronze mf123hpb16 , shaft sleeve sd mf123hpb05 , discharge bush bronze mf123hpb29 , sleeve nut en 8 mf123hpb03 , gland flange bronze mf123hpb04 , impeller bronze mf123hpb11b , large seating and bush 0012 , bearing bush top and bottom 0040 , balance valve 4st1706297930 , shaft sleeve de and nde 0005 , impeller bronze ltb ii 19 , gland top and bottom de and nde 0031

Central Government And Public Sector

CTN :40478280

21 Jul, 2025 NA

Kudankulam - Tamil Nadu

Tender For corrigendum : tender for supply of cpvc pipes and fittings - cpvc butterfly valve with manual operated , wafer type , size- 8 inch , end connection wafer type .valve to be tested to api 598 bs 6755 standard. , cpvc butterfly valve with manual operated , wafer type , size- 6 inch , end connection wafer type. valve to be tested to api 598 bs 6755 standard. , cpvc butterfly valve with manual operated , wafer type , size- 4 inch , end connection wafer type. valve to be tested to api 598 bs 6755 standard. , cpvc butterfly valve with manual operated , wafer type , size- 3 inch , end connection wafer type. valve to be tested to api 598 bs 6755 standard. , cpvc butterfly valve with manual operated , wafer type , size- 2 inch , end connection wafer type. valve to be tested to api 598 bs 6755 standard. , cpvc flange , dn200 , pn10 , material standard astm d1784 , class 23447 , flange drilled to ansi b16.5 class 150 , cpvc pipe , dn200-sch80 , dimension standard-astm f441 , material standard-astm d1784 , class 23447 , cpvc elbow 90 , dn200-sch80 , dimension standard-astm f439 , material standard-astm d1784 , class 23447 , cpvc saddle clamp. pn10 , dn200 x dn25 , material standard-astm d1784 , class 23447 , cpvc pipe , dn25-sch40 , dimension standard-astm f441 , material standard-astm d1784 , class 23447 , cpvc flange , dn25 , pn10 , material standard-astm d1784 , class 23447 , flange drilled to ansi b16.5 class 150 , cpvc elbow 90 , dn25-sch40 , dimension standard-astm f438 , material standard-astm d1784 , class 23447 , cpvc coupler dn200-sch80 , dimension standard-astm f439 , material standard-astm d1784 , class 23447 , cpvc coupler dn-25 sch40 , dimension standard-astm f438 , material standard-astm d1784 , class 23447 , industrial grade cpvc primer solutions - p70

Ss Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Corporations And Associations And Others

Central Government / Public Sector

Central Government/Public Sector

Central Government And Public Sector