Latest stabilator Tenders | Government stabilator Tenders

State Government

CTN :41037954

21 Jul, 2025 23.14 Lacs

Karaikal - Pondicherry

Tender For providing and laying 300 sq mm pvc insulated u.g cable double run with trenches for erection of new ct scanning equipment in ground floor of opd block at govt. general hospital, karaikal

Central Government/Public Sector

CTN :41045623

01 Aug, 2025 NA

Nashik - Maharashtra

Tender For supply of ground support equipment: small size swivel installation /turn table (part no. : mpu-1-i-ti)

CTN :41025043

22 Jul, 2025 NA

Jodhpur - Rajasthan

Tender For providing of professional painting service - painting of ground handling equipment; painting of ground handling equipment; painting of ground handling equipment

CTN :41024740

29 Jul, 2025 18.00 Lacs

Bagepalli - Karnataka

Tender For technical specifications specification and application of the auto tippers vehicle of 3 cum capacity certification at the time of supply of the equipment the chassis should not be more than 6 months old yes type of tipper garbage tipper type of chassis frame conventional category of vehicle for which chassis to be used light capacity commercial vehicles type of chasssis chassis with facecowl type of fuel diesel vehicle emission complaince bs vi fuel consumption declared by oem as certied by test agency under rule 115of cmvr 1989 kmpl 16 speed, max km hr 80 max engine power bhp bhp rpm44 2 rated rpm at max engine power 3750 max engine torque n m rpm 110 rated rpm at max engine torque 2500 main engine aspiration natural aspiration no of cylinder in main enginenos 2 fuel tank capacity ltrs 30 liter gradeability of vehicle with load 43 ground clearance mm 175 mm wheel base mm 2250 mm kerb weight kg 1120 kggross vehicle weight kg 2120 kg type of bis marked vehicle tyre radial chassis transmission system manual number of speed forward gears 5 type of steering power operated turning radius,min mm 4750 mm speed governers ecu yes abs fitted no front vehicle brake drum brake rear vehicle brake discbrake type of clutch singledry plate tipping angle degree 85 tipper container capacity volume cubic metres 3 size of front tyres mm 165rl4lt size of rear tyres mm 165rl4lt size of wheel mm 165mm tipper body pivot length mm 2300 mm tipper body length mm 2500 mm tipper body height mm 700 mm overall height of tipper from ground mm 1800 mm body plate thickness mm 2 main frame thickness mm 3 millimeter hydraulic system yes tipping hydraulic cylindersmake reputed make hydraulic system driven by main engine tipper container material mild steel thickness of sheet from tipper collector container made mm2 millimeter dumping height mm 1200 mm engine oil pressure level indicator in control panel yes fuel gauge indicator in controlpanel yes engine cooling liquid temperature indicator in control panel yes operating hour meter no locking unlocking of tipper discharge container yes lowering lifting of tipper discharge container yescounter weight no if yes counter weight kg 0 kilogram paint automotive paint standard sparewheel and tool kit yes warranty time month 12 month no. of free service nos 3 battery warranty months 12 month warranty distance km unlimited during warranty period yes vehicle registration insurance charges miscellaneous

CTN :41043092

28 Jul, 2025 5.88 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of ground in sathyan nagar estate ward in nemom lac, thiruvananthapuram - supply and installation of outdoor gym equipment

Central Government/Public Sector

CTN :41009211

25 Jul, 2025 NA

Bokaro - Jharkhand

Tender For upkeep of hangar building of aviation department and surroundings, regular cleaning of aircraft interior/exterior, ground support equipment & deep cleaning of aircraft and support in camo activity.

Corporations And Associations And Others

CTN :40996058

14 Jul, 2025 48.39 Lacs

Delhi - Delhi

Tender For repair and maintenance of mechanical and electrical equipment installed at parade ground car parking in ward no. 75 under city s.p. zone.

State Government

CTN :40985789

28 Jul, 2025 3.50 Crore

Mohali - Punjab

Tender For purchase of biomechanical lab - force platedimensions (w x d x h) in mm : 600 x 400 x up to 50 number of axes for force measurement: all 3 axes. x,y,z plate should be portable in naturesensor type: piezoelectricsampling frequency-(hz) =1000 hz or more force measured on each axis-fx,fy: 2,000 newton or more, fz: 10,000 newton or more hysteresis- (%fso): 0.5 linearity (%fso) 0.5 crosstalk (%) : 2water resistance rating: ip 50 or better.should be inclusive of installation.should be supplied with carrying case for 2 plates and noise free ups for on-ground assessment. the carrying case should be strong and sturdy.should be able to accommodate portable force plate 9286 ba, daq box 5695 and connecting cablesshould be able to protect the equipment from rain, impact and dust, should have rollers to move easilyshould be able to accommodate an ups also., isokinetic dynamometershould be able to access/test various joints in isolation should be able to meet requirements to test sports personsshould be able to test in different resistance modes such as isokinetic (concentric-concentric, concentric-eccentric ,eccentric, concentric ,and eccentric-eccentric), isotonic, isometric, and passive protocols should include options for angles, hold-times, rest period, repetitions, and sets. the system should be able to test all the major body segments and joints such as shoulder, forearm, elbow, wrist, hip, knee, and ankle.should have adjustable range of motion stops in full 360 degrees.should have 360-degree rotation for the force arm (connecting dynamometer to the pedal) to have wide range of motionshould be able to accommodate different athletes with varying height and weight with provision for seatbelt harness for better stabilitythe dynamometer or chair should be movable to accommodate different athletes for quick set-up and better usability with locking clamps for securing the system in place for testingshould be able to do gravity correction when the limbs are positioned with the lever arm on the dynamometerthe software should be provided to analyze the raw data and export the raw and processed data in different file formats such as excel, text, etc. the software should provide detailed report for various testing protocols such as individual test for joints, data/graph overlay for comparing pre and post testing, repeatability, progress, multi-session.should be provided with latest compatible workstation/laptop of reputed brand like hp, dell (latest generation) processor, minimum16gb ram, windows os 11, and laser printerconcentric speed: 500 deg/sec or more eccentric speed: 500 deg/sec or more concentric torque: 500 ft-lb (678nm) or more eccentric torque: 500 ft-lb (678 nm) or more isometric torque: 500 ft-lb (678 nm) or more isotonic torque: 500 ft-lb (678 nm) or more isotonic torque as low as .5 ft-lbfeedback formats: roadway, interactive line, interactive path, reaction training, proprioception training, breakout, and pong.torques. time, torques. angle, torque bars, work bars, power bars. it should be possible to use mechanical stops even with custom patterns (important for safety in research)the same attachment should be usable for left and right side of subject for consistencies in data.should be certified and approved by ce/eu medical devices directives or usfda, nord boardit should be portable and should have 2 load cell sensors per unit with easy to attach hooks pivoting 360 degrees joint improving sensor accuracy it should have knee position indicator for replication of test position in each time. should have sample rate per sensor: upto 400hz, capacity per sensor: 100 kg/980-1000n safe over load per sensor: 150kg/1500n, max over load per sensor: 200kg/ 2000n, resolution: 1n and sensitivity: 22.0+/-mv/v. should have rechargeable battery & battery life should be100 active hours approx. should have working temperature range 5-40 c. (all weather proof) latest upgradable software should have both wired & wireless connectivity connec

CTN :40966558

19 Jul, 2025 NA

Tirupati - Andhra Pradesh

Tender For certain repairs, supply and fixing of outdoor activity equipment and kid's play ground apparatus in babu jagjeevanram park and srinivasapuram parks of tirupati urban and rural mandals

Central Government/Public Sector

CTN :40966145

28 Jul, 2025 NA

Bhopal - Madhya Pradesh

Tender For bhopal division - part (a)-modernization of s & t infrastructure by construction of centralized store building (sse/sig./store/bpl) along with offices sse/sig./maint./bhopal. (i) construction of s & t equipment room of ground floor , first floor with rcc raft foundation, internal water supply with sanitary installation. (ii) boundary wall for s & t store building & offices. part (b)- construction of industrial shed with flooring and 14 storage shelfs. part (c)- repair and maintenance of track machine building and shed at rkmp zonal track machine depot. part (d)- proposal for repairs and maintenance of work of rms bhopal pf no. 1.

Stabilator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Corporations And Associations And Others

State Government

Central Government/Public Sector