Latest stage craft Tenders | Government stage craft Tenders

Central Government/Public Sector

CTN :43502683

29 Jan, 2026 NA

Bangalore - Karnataka

Tender For supply of supply of air cooled split airconditioners please refer as per specification attached , installation charges for complete system please refer as per specification attached , supply installation of hard drawn copper refrigerant piping please refer as per specification attached , communication cable of suitable rating, as per site requirement please refer as per specification attached , fabrication and installation of ms base frame for indoor units and outdoor units please refer as per specification attached , during commissioning please refer as per specification attached , providing and fixing copper armoured power cable please refer as per specification attached , cable tray gi perforated cable tray with cover for piping work please refer as per specification attached , supply fabrication installation and commissioning of ducting please refer as per specification attached , supply and fixing of nitrile rubber of thickness 13 mm or higher please refer as per specification attached please refer as per specification attached , suitable air eye ball jet diffuser with damper to supply air at least 12 nos or higher refer as per specification attached , suitable air eye ball jet diffuser with damper to supply air at least 12 nos or higher as per site requirement please refer as per specification attached , cpvc drain pipe with nitrile rubber insulation and all necessary fittings please refer as per specification attached

CTN :43334715

14 Jan, 2026 NA

Panipat - Haryana

Tender For corrigendum : development of fabrication yard including area grading work and for structural fabrication work related to civil structural and piping works for ms block balance work project of iocl at panipat refinery

State Government

CTN :43004977

20 Jan, 2026 1.68 Crore

Kutch - Gujarat

Tender For corrigendum : work of strengthening, fabrication and erection of steel structures of lhp unit 3 including applying anti-corrosive epoxy paint at kltps

CTN :43493293

23 Jan, 2026 10.00 Lacs

Vidisha - Madhya Pradesh

Tender For repairing work of m.s.fabrication work and valve repairing wok vidisha

State Government

CTN :43494533

19 Jan, 2026 4.50 Lacs

Pali - Rajasthan

Tender For cutting, welding, threading & fabrication etc pipeline specials, sluice valve, nrv repairing work in jurisdiction of city sub division pali

State Government

CTN :43494535

19 Jan, 2026 4.50 Lacs

Pali - Rajasthan

Tender For cutting, welding, threading & fabrication etc pipeline specials, sluice valve, nrv repairing work in jurisdiction of project sub division pali

State Government

CTN :43494754

20 Jan, 2026 15.00 Lacs

Pali - Rajasthan

Tender For providing, supplying and installation ms fabrication work under division falna

corporations/Associations/Others

CTN :43494836

29 Jan, 2026 NA

Bharuch - Gujarat

Tender For providing, fixing and installing of 1.5 ton, 5 star rating window ac inverter- air conditioner machine including work of fabrication with buyback of existing in kiosk at 400kv kosamba s/s under bharuch tr circle

State Government

CTN :43467490

13 Jan, 2026 NA

Delhi - Delhi

Tender For s/i/t/c of e/m equipments and allied works for newly re-bored tube well at okhla vihar near majar in okhla constituency ac-54. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 15 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point: 200-125-75 lpm on 89-124-133 mtr. head.having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved. , supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted. a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no. b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 no c) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no. e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable banking g) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos.complete wiring &installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated and pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs. make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., supply of ms nut bolts off size as per requirement., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 1x1 made out from 6mm thick m.s. sheet in 2 halves and a circular hole in centre 3-1/2 dia. with locking arrangement by nuts and bolt. , earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

CTN :43504064

08 Jan, 2026 NA

Vadodara - Gujarat

Tender For work of fabrication of alignment mechanism though universal coupling on butterfly valves spindles and supply of caps for valves in north zone area.

Stage Craft Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

State Government

corporations/Associations/Others

State Government