Latest stainless steel clamp Tenders | Government stainless steel clamp Tenders

corporations/Associations/Others

CTN :40507134

27 Jun, 2025 NA

Nashik - Maharashtra

Tender For supply of digital storage cro (cathode ray oscilloscope) , digital lcr meter , dc regulated power supply , soldering clamp holder , trinocular simul focal stereo microscope , illuminated stand magnifier , esd safe electronics re-work table , esd safe chair

CTN :40253011

31 May, 2025 NA

North 24 Paragana - West Bengal

Tender For bid to ras tender for supply of safety filter(jd mk-i plate-03) , bushing (plate-j-15) , lub fitting (ispl plate-i02) , cap screw m12 x 100 , turn indicating lamp lh(ispl plate-h03) , turn indicating lamp rh (ispl plate-h03) , washer(i01) , washer , rod (plate-i07) , flange nut(plate i-08) , stud(plate-j01) , t bolt type vacuum indicator(ispl plate-b03) , snap ring , wrench 10 (tat jd 315se mk-1 p-313 sl no-27) , tubuler spnr 12.5x21 , rod(plate -j01) , wear plate (ctlg plate-i10) , cap screw , adaptor( plate-j07) , hose clamp , rod , spanner 19x22(tool list) , hose clamp t bolt type , washer , accelerator rod , hex nut , rod(plate-j01) , rod , spnr 10x12 (tata jd 315se p-303 sl no-11) , fitting , knob , spanner 24x27mm (ojde) , rubber bellow (upper cooling water line to thermos , o ring(plate-k03) , valve(r2) , rod (plate-i08) , pin assy , adapter (ispl plate-j02) , wrench socket 2 , wire harness park break , union fitting (ispl plate-f05) , support(plate-j01) , adapter(plate-f03) , knob , push rod(r2) , spanner 24x27 mm (ojde) , rod , switch park brake(ms sl-286) , horn , flange nut , clamp (p-15) , tee fitting(p-179) , fitting (plate-j15) , wrench adjustable 305mm , jet assy , bell crank(plate-i08) , cap screw , arm service lock(plate i-06) , spacer(plate-j01) , grip with horn switch knob ctlg plate-j12) , o ring , hyd hose (ispl plate-f03) , spacer (plate-b06) , oil line (p-179) , hose assy , oil line(plate -f01) , spanner open end 18x 19 , hammer 1-1 by 2 , pin (ispl plate-i12) , spanner open end 16x 17 , pin , elbow fitting , elect temp gauge(ctlg plate-h05) , door retainer latch unit (tata jd 315v) , water reservoir , bushing , cabin harness , cutter for exhaust valve seat(smt-32) , knob(plate-j12) , switch pressure-(130psi) (price list tata jd 315v , stay rod lh & rh , hose , dial indicator , hose tank to fuel tank , pin(plate-j15) , pin (ispl plate-k03) , hyd hose (ms sl-314) , gear shaft lever switch assy , hydraulic hose , muffler extention(ispl plate-b04) , hydrolic hose (ispl plate-f01) , shaft seal , base , running disc , pedal lh (plate-j-15) , pedal rh (plate-j-15) , gauge speedometer (ispl plate-h03) , magnetic stand , hose (ispl plate-j04) , lever , knob , interior light (os sl no-407) , bar extension 2 , u ring , lever(plate-07) , tie rod end (ctlg plate-j01) , hose (ispl plate-b06) , digital hour meter (p-344) , wiper motor(ctlg plate-h02) , seal kit (p-347) , knob , tapper roller bearing (p-63) , screw joint coupling 9 by 26 inch (smt-28) , cassette ring (zf ser no 260) , tube , grab sleeve , assy hour meter(r1) , driver , assy tool box , measuring cover , indicator for transmeter , i clutch disk (ispl-old) , insert , handle set for water pump(smt-30) , piston rod s by a(315se mk-1 p-277) , atomiser assy includes 17 , 18 , 19 and 20 (ms sl-67) , steering cylinder (tata jd 315se plate j31) , cutter for 30o(smt-33) , instrument cluster , glass-4 , piston rod s a (315se mk-1 p-293) , wheel stud puller , glass-1 (tata jd 315v) , glass-6 (tata jd 315v) , glass 5(os sl no-347) , bell crank (plate-j-01) , straightedge , high pressure pump super(smt sl-10) , door glass rh & lh , fender l h (tata jd 315v) , fender (r h) (tata jd 315v) , seat(plate-g03) , entrance door(os sl no-335) , track rod , induction coil assy (ispl plate e4 , e6-7) , rear swivel door lh(os sl no-337) , rear swivel door rh(os sl no-338) , bucket tilt ldr cylinder , switch reverse control (ispl plate-c03) , single point ripper(ref-k03) , frame(i14) , wheel rim (hd) , backhoe bucket (0.09 cum)(tata jd mk-1 plate k04) , backhoe bucket(0.18 cum)-ispl plate-k05 , ditch cleaning bucket0.35 cum) , boom lock solenoid(ctlg plate-h02) , crain attachment hb crain , sliding frame(p-177) , converter (alt no from price list-15815) , converter , sliding frame with piston bushing 7 seal , gear box assy(zf p-64)

CTN :40469202

14 Jun, 2025 NA

Budgam - Jammu And Kashmir

Tender For tender for supply of chop saw machine make dewalt , gas cutter make esab , grinding goggle white , welding goggle black , nozzle cutting 1 oblique 64 , nozzle cutting 1 oblique 32 , nozzle cutting 1 oblique 16 , welding white glass shield screen , welding glass black , leather gloves , grinding wheel 100x6x16mm , cutting wheel 100x6 , hydrochloric acid , nausadar , cooper soldering chisel kavya , soldering lead 80 percent , 680 welding rod , gas welding aluminum rod and flux , ms welding rod 2 point 5mm , ms welding rod 3 point 15 mm , ms welding rod 4mm , painting brush 2 inch , painting brush 4 inch , painting brush 01 nos to 12 nos , m seal , anabond , thread tape , insulation tape , 12 nos benjo washer 01 pkt of 100 pcs , 15 nos benjo washer 01 pkt of 100 pcs , 17 nos benjo washer 01 pkt of 100 pcs , 19 nos benjo washer 01 pkt of 100 pcs , clamp hose 0 point 5 inch , clamp hose 1 inch , clamp hose 1 point 5 , feviquick , araldite 25 gm , nut and bolt 8x1 point 5mm , nut & bolt 10x1 point 5mm , nut & bolt 12x1 point 5mm , nut & bolt 14x1 point 5mm , steel screw 0 point 5 inch , steel screw 01 inch , steel screw 1 point 5 inch , water emery blade paper 180 , hacksaw blade , power hacksaw blade , dandrite , wheel balancing weight 10g 20g 50g , grease nipple 11mm , grease nipple 13mm , female thimble pkt of 100 nos , thimble 08mm pkt of 100 nos , thimble 10mm pkt of 100 nos , thimble 12mm pkt of 100 nos , thimble 16mm pkt of 100 nos , thimble 18mm pkt of 100 nos , pvc heat shrink sleeve 01mm , pvc heat shrink sleeve 02mm , pvc heat shrink sleeve 03mm , pvc heat shrink sleeve 04mm , pvc heat shrink sleeve 05mm , pvc heat shrink sleeve 06mm , pvc heat shrink sleeve 08mm , lt wire 1 sq mm auto cable 90 mtr roll , lt wire 2 sq mm auto cable , lt wire 4 sq mm auto cable , lt wire 0.75 sq mm auto cable , lt wire 6 sq mm auto cable , lt wire 8 sq mm auto cable , pvc harness tape black 19mmx60 mtr non adhesive , sleeve tape 25 mtr roll , cotton tape 25 mtr roll , ampper tape 25 mtr roll , battery terminal oblique positive heavy duty , battery cable 80 sq mm red 25 mtr roll , battery cable 80 sq mm black 25 mtr roll , battery cable 50 sq mm red 25 mtr roll , battery cable 50 sq mm black 25 mtr roll , auto blade fuse 05 amp , auto blade fuse 10 amp , auto blade fuse 15 amp , auto blade fuse 20 amp , auto blade fuse 25 amp , soldering wire 60 oblique 40 , head light blub 90 oblique 100 24v , single filament bulb 21w oblique 24v , double filament bulb 21w oblique 24v , single filament bulb 10w oblique 24v , single filament bulb 3w oblique 24v , fog light hallogen bulb 55w oblique 12v , relay 4 pin 12v oblique 30 amp , 4st relay 24v , push batton switch , toggle switch , fog light halogen bulb 55 oblique 21v , head light bulb 12v , assy tail lamp lh , bulb 12v , socket set 46 pcs 1 oblique 4 inch , screw driver set taparia , screw driver flat 150mm taparia , screw driver star 300mm taparia , screw driver star 150mm taparia , line tester taparia , allen key set bosch oblique taparia , ups battery 12v 7 point 5 ah make zebronics , digital wall clock having tempreture display feature

State Government

CTN :40477216

29 May, 2025 NA

Hyderabad-T - Telangana

Tender For supply of ac/dc digital clamp meter (fluke 317 model)

State Government

CTN :40474587

29 May, 2025 NA

Darjeeling - West Bengal

Tender For supply & delivery of 02 number digital multimeter, 02 numbers digital clamp meter, 01 number 185sqmm crimping cools(normal) and 01number 50sqmm-630sqmm hydraulic crimping tools for maintenance work and proper up keeping of 05(five) nos. of small hydel power stations under mini micro hydel division, wbsedcl, kurseong, as per the schedule of work in annexure-a.

State Government

CTN :40474588

29 May, 2025 NA

Darjeeling - West Bengal

Tender For supply & delivery of 02 number digital multimeter, 02 numbers digital clamp meter, 01 number 185sqmm crimping tools(normal) and 01number 50sqmm-630sqmm hydraulic crimping tools for maintenance work and proper up keeping of 05(five) nos. of small hydel power stations under mini micro hydel division, wbsedcl, kurseong, as per the schedule of work in annexure-a.

State Government

CTN :40425877

02 Jun, 2025 2.00 Lacs

Vidisha - Madhya Pradesh

Tender For corrigendum : enquiry for various item bi cell - clamp meter make/-meco-3510 phw trms power meter, clamp meter make/-meco mc-36 auto ranging 400 amp ac or dc 3 digit 4000 counts digital clamp meter, high voltage line tester, make ingco vd 1003-ac 12-100 volt, insulation resistance meter, make meco dit/954-6r 5kv, plier, make tapariya 8 inch, nose plier make tapariya 1420-6 (6 inch), cutter, make tapariya1101-6 (165mm), screw driver, make tapariya 10 inch, tester make tapariya 5 inch, analog multi meter make-sanwa, japan sp-180 along multi meter

State Government

CTN :40488630

31 May, 2025 NA

Karimnagar - Telangana

Tender For supply of digital multi meters, digital clamp meters, digital leakage clamp meters for omc circle, adilabad in karimnagar zone.

Corporations And Associations And Others

CTN :40472206

29 May, 2025 NA

Panipat - Haryana

Tender For purchase of general consumable item - araldite, make- pidilite (1.8kg packing), sr-998, make: pidilite, ( per kg), m-seal (per kg.), make: pidilite, locktite -406 (per 20ml), make: hankle, blue tube paste (set), hold tite (kg.), make-pidilite, rustolene (per ltr), birkosit sealing compound, dunlop adhesive (kg.), safeda (zink white powder) (per kg), graphite powder (kg.), make-vicco, safety solvent standard, molikote paste 1000 (pkt./tube), molykot- g rapid plus, molykot- d-321 spary, molykot spray 1000 (400 ml), molykot grease 1000, molykot-z powder (per kg), anabond 666 (100gram), molykot spray l-0500, stag-b compound jointing (per kg), dp test kit set of 03 bottles, make: checkmate, wd-40 spray (400 ml), make- pidilite, brasso (500 ml), puf spray pu foam insulation sealent (750gram), make- abro, roll guard grease, make: j.d jones (per kg), bearing retainer 660, thread seal 542, fevicol sh (per kg), cold galvansing spray, feviquick 50 ml, cotton waste (kg.), marking cloth (mtr.), filter cloth, coton cloth (canvas), size-48 (per mtr), heavy duty forged steel u-clamp (pcs), grease gun 2 kg., grease gun 5 kg., ultrasonic thickness tester (set), measuring tape 3 mtr., make-hi-wide (pcs.), measuring tape 5 mtr., make-hi-wide (pcs.), measuring tape, 13mm fiberglass water proof, 50 mtr, make- freemans, grinder ag-4, make: bosch, grinder ag-7, make: bosch, impact wrench model gds 18e, make: bosch, walkie talkie model-tk3501make: kenwood (license free), paint air spray gun, master level +0.02mm accuracy, size-6 , make- mitutoyo/rsk japan, dial test indicator with magnetic stand, 50mm, make- mitutoyo., shore-a digital rubber hardness durometer (din-53-505,aspm-d,2240) (pcs.), make- eco-sr, lead wire 0.5mm, zig zag clamp, size-3/4 , electronic weighing machine, size-400x400mm, cap-50 kg, straight shank drill bit set 1-13mm make bosch, heavy duty impact socket with hole 19mm for impact wrenach, heavy duty impact socket with hole 30mm(suitable for 1 inch square) for impact wrench, heavy duty impact socket with hole 32mm(suitable for 1 inch square) for impact wrench, heavy duty impact socket with hole 34mm(suitable for 1 inch square) for impact wrench, heavy duty impact socket with hole 46mm(suitable for 1 inch square) for impact wrench, sa-46 steel socket set, make- taparia, tool goti 34 no., surface block with adjustable screw, size- 12 inch, make- mitutoyo, outside caliper s.s, size- 6 inch, make- sumit tools, inside caliper s.s, size- 6 inch, make- sumit tools, steel spring inside caliper 6 , make- sumit tools, steel spring outside caliper 6 , make- sumit tools, filler guage 9 x 26 blade, filler guage set 150mm long x 26 blade, filler guage set 300mm long x 26 blade, rubber pad with nut, ag-4, buffing wheel 4 , emery paste rough (pcs./tube), make: carborandom, emery paste fine (pcs./tube), make: carborandom, emery tape rough, 2 inch (50 mtr. roll) make carborandom, emery tape medium, 2 inch (50 mtr. roll) make carborandom, emery tape fine, 2 inch (50 mtr roll) make carborandom, emery paper rough (pkt.25 pcs.) make carborandom, emery paper fine (pkt.25 pcs.) make carborandom, emery disc 4 (pcs.) make carborandom, emery disc 5 (pcs.) make carborandom, emery disc 7 (pcs.) make carborandom, cutting wheel 4 (pcs.) make bosch, cutting wheel 5 (pcs) makw: bosch, cutting wheel 7 (pcs.) make bosch, cutting wheel 11 (pcs.) make bosch, grinding wheel 4 (pcs.) make bosch, grinding wheel 5 (pcs.) make bosch, grinding wheel 7 (pcs.) make bosch, grinding wheel diamond 250x25x31.75 rough (pcs.), grinding wheel diamond rough 200x25x31.75mm (pcs.) make carborandom, grinding wheel diamond fine 250x25x31.75 (pcs.) make carborandom, hexa blade x 12 , make: miranda, power hexa blade 14 x 1 x 0.05 (6tpi), make: miranda, power hexa blade 14 x 1 x 0.05 (10tpi), make: miranda, power hexa blade hss (6tpi), size: 350 x 32 x 1.60mm, make- miranda, hecksaw blade 24 tpi, make; miranda, hss blade, size: 1.25 x 14 (10 tpi), make: miranda, heckshaw frame: x12 , leathe

State Government

CTN :40203265

16 Jun, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of measuring instruments for emd-1 to 8 at wtps. - digital infrared thermometer (type: portable non-contact type thermometer, range: -40 to 800 deg.centigrade, sighting: laser guided, accuracy: +/- 0.5 deg. centigrade), analog multi range insulation tester.hand driven type,voltage range-250v/500v/1000v., portable infrared thermal imaging camera with laser pointer., digital megger (insulation tester) dual voltage 500/1000 v 0 to 2000 megaohms resolution of 1 m? weght: 500 gm approx., digital vernier calipers size - 0-300 mm mitutoyo make, digital multimeter 4.1/2 digit (true rms), digital clamp on meter lcd display with backlight, 3-3/4 digit., digital ma clamp on meter, digital micro ohm meter model, clamp type digital earth resistance meter, digital insulation resistance measuring equipment. max. range: 1 tera ohm, selectable voltage range: 250/500/1000/2500/5000 v, portable, analog motor checker, ac ammeter 0-150a 4-20ma input , class - 1.5, 72 x 72 mm, ac ammeter 0-100a 4-20ma input , class - 1.5, 72 x 72 mm, ac ammeter 0-50a, 4-20 ma, class -1.5 ,72x72 mm,0- 90 deg scale, ammeter a.c range: 0-200 amp.(moving iron) 4 - 20 ma accuracy: 1.5 dimention: 72x72 mm (panel mounted), a-meter : range 0 to 250 - 1500a ac, moving coil, ctr 250/1 a, 1.5, mounting panel, size 96x96, scale 240 deg, is -1248, make ae., ac ammeter 0-150a 150/1, class - 1.5, 72 x 72 mm, ac ammeter 0-200a 200/1, class - 1.5, 72 x 72 mm, a.c.ammeter moving coil ac rectifier type ct operated (w/o ct) range 0-150 a ctr 150/1a size:96x96 mm , 240 deg circular scale,flush panel mounting, ac ammeter 0-100a, 100/1, class -1.5 ,96x96 mm, 0-20-40-60-80-100-600a, analog ammeter ctr 50/1 range 0-50-300, ac ammeter range 0-200 amp. ct operated ctr 200/1 a, 96x96, ac ammeter 0-30a, 30/5, class - ,96x96 mm,0- 90 deg scale, ac ammeter 0-75a, 75/5, 96x96 mm,0- 90 deg scale, ac voltmeter 0-300v, class -1.5 , 96x96 mm,0- 90 deg scale, ac volt meter range 0-500 volts 96x96 mm2 moving iron type 90 deg., accuracy class +/- 1 percentage, type sif 96, kew make, volt meter, range-0 to 500v, ptr:415/110v, size:96*96mm., dc ammeter range 0-500 amp, 96x96 mm2, moving coil type to be connected with 75 mv shunt (without shunt), dc center zero ammeter scale 200-0-200 a dc, 96 x 96 sq.mm switchboard flush panel mounting moving coil to be operated with an external shunt of 75 mv drop, 90 deg. scale (without shunt), accuracy class +/- 1 percentage type, dc ammeter 0-400a, 60 mv shunt, class -1.5 ,72x72 mm,0- 90 deg scale, dc ammeter 0-100a, 75 mv ext.shunt, class -1.0 ,96x96 mm,0- 90 deg scale, dc voltmeter 300-0-300v, class -1.0 , 96x96 mm,0- 90 deg scale, dc voltmeter 0-50v, class -1.5 , 72x72 mm,0- 90 deg scale, ac ammeter 0-630a, 630/1, class -1.0 ,96x96 mm,0- 90 deg scale, ac ammeter 0-4000a, 4000/1, class -1.0 ,96x96 mm,0- 90 deg scale, dc voltmeter range 0-100kv 400micro amp, analog ammeter ctr 400/1 range 0-400, ae make dc amp meter,moving coil type,range:-0 to 1500 milli amp,fsd:-0 to 1 milli amp for 2.25 vdc,accuracy class:-1.5,flush mounting type,240 degree circular scale.size:-96x96 mm

Stainless Steel Clamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors