Latest stainless steel letter Tenders | Government stainless steel letter Tenders

Central Government/Public Sector

CTN :41544538

05 Sep, 2025 NA

Chennai - Tamil Nadu

Tender For supply of steel tubes, tubulars and other steel fittings as per is 1239 (part 2 - steel pipe fittings) (q3)

State Government

CTN :41533635

01 Sep, 2025 40.00 Lacs

Jaipur - Rajasthan

Tender For ग्राम पंचायत तूंगी में महात्मा गांधी नरेगा व अन्य योजनान्तर्गत विकास कार्यो के लिए निर्माण सामग्री आपूर्ति का कार्य --supply of construction material for development works under mahatma gandhi nrega and other schemes in gram panchayat tungi--, ghila/kankar/jhajhra, , mud masala, , lime from kali bhatta for lime masonry work, , cement, , ppc, , white cement, , fine aggregate, , sand/gravel, , gravel - local, , rakhi (fly ash), , surkhi, , stone dust (in masonry work), , ballast stone/brick (for other than road work), , 40mm measuring stone (hand broken grit) (cut voids 1/11), , 40mm grit stone (broken by crusher) (cut voids 1/11), , 20mm grit stone (broken by crusher), , 12/10/6mm stone grit (broken by crusher), , brick mortar, , material for road work (including 5 km lead), , 63-40mm crushed stone aggregate (cut voids 1/11), , 63-40mm hand broken stone aggregate (cut voids 1/11), , 90-45mm. hand broken stone aggregate (cut voids 1/11), , quarry rubbish (cut voids 1/6), , gravel (cut voids 1/6), , conker (cut voids 1/6), , binding material (pi 4-6) (cut voids 1/6), , brick (22.5 x 11 x 7.50 cm), , first class, , ii class, , soling / kharanja / masonry stone, , chinrai beradda (rr), , masonry course (cr), , kharanja soling (for flooring work upto 15cm height), , kharanja soling (23cm height for road/kharanja work), , jodhpuri type stone strips/bows/slices (length 2-3', width 10-, , 12", thickness 2.5-3.5"), , flaky material (3-4" thick & length and width 1-2"), , sandstone (dpc, sill, coping, lintel, tand, almirha etc), , up to 25mm thickness, , up to 25-40mm thickness, , upto 40-50mm thickness, , up to 50-75mm thickness, , upto 75-100mm thickness, , a, flooring / strip patan katla stone up to 100-150mm thickness, , floor planks upto 35mm thick, min. 3 sqft or more area, , katla for strip paving 60-75mm thickness, min. 3 sqft or more area, , unpolished rough kota stone, , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , polished kota stone (one side polished), , upto 900 sq.cm, , 901 to 2300 sq. cm, , marble stone (makrana adanga 20mm thick) more than 2300 sq.cm, , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , marble chips, , marble powder, , marble stone (rajnagar || quality/local 20mm thick), , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , stone threshold, , single patam size 100 x 75mm., , double paitaam size 125 x 75 mm. stone slabs, , up to 1.5 m length, minimum 40mm thick, , 1.5 m to 2.40 m length, minimum 50mm thick, , 2.4 m to 3.0 m length, minimum 65mm thick, , above 3.0 m length, minimum 75mm thick, , precast tiles/blocks, , glazed size-30x45 cm, , mosaic size-40mm thick, , vitrified size-60x60 cm, , interlock tiles/brick/block for road work, , cement interlocking block m-30grade, 60mm thick, , cement interlocking block m-30grade, 80mm thick, , cement interlocking block m-30grade, 100mm thick, , fr pvc insulated copper conductor single core cable isi marked, , 1.50 sq mm, , 2.50 sq mm, , 0.50 sq mm, , 1.00 sq mm, , 4.00 sq mm, , 6.00 sq mm, , local wood with fittings (for doors, windows and furniture), , mango, , force, , other, , factory made doors (30mm thick, solid core single leaf), , structural steel iron (tor steel fe 415/500 for reinforcement), , winding wire 18 gauge, , iron guard, , conical iron/square bar/patti/angle iron, , barbed iron wire(size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage, , forged, , iron mesh (24 gauge, 14 mesh), , cement concrete lattice sky patal 40mm thick, , glass, , 3mm thick glass, , color paint, , inamil paint, , distemper (water bound), , for lime whitewashing(aras/kali), , primer (for iron / wood), , petroleum products, , diesel hsd, , mobil oil, , bitumen shalitax board (25 mm thick), , plain sheet, , gi sheet 22 gauge (0.80 mm), , gi sheet 24 gauge (0.63 mm), , m.s. sheet 22 gauge (0.80mm) m.s. sheet 24 gauge (0.63mm), , corrugated sheet, , gi sheet 1mm thick, , gi sheet 22 gauge (0.80 m.m.), ,

Central Government/Public Sector

CTN :41540536

12 Sep, 2025 1.97 Lacs

Paschim Medinipur - West Bengal

Tender For supply of procurement of nbcd items c c - band multipurpose fpr twenty mm to fifty mm dia pipes , band multipurpose fpr one hundred mm to two hundred mm dia pipes , clamp emm two hundred thirty by one hundred ninety mm for use with one hundred fifty mm shore , circular stopper plate complete with fittings , caulking shipwrights common , flax canvas variey no one , dc patrol bag , anti flash gloves , antiflash hood , foam liquid afff twenty ltr plastic container , wedge soft wood one hundred fifty by seventy five by twenty five mm , splinter box three hundred five by three hundred five by one hundred twenty seven mm , sheet rubber type a grade one thickness three mm size one m by one m , plug sq tapered soft wood seventy mm by twenty five mm twelve mm , plug sq tapered soft wood three hundred mm by one hundred fifty mm by one hundred mm , plug sq tapered soft wood seventy five mm by twenty mm by twelve mm , plug sq tapered soft wood one hundred fifty mm by seventy five mm by fifty mm , plug sq tapered soft wood one hundred fifty mm by fifty mm by thirty eight mm , plug sq tapered soft wood one hundred mm by one hundred fifty mm by one hundred mm , splinter box one hundred sixty by one hundred sixty by one hundred twenty seven mm , splinter box two hundred fifty by one hundred twenty seven mm , engineers screw driver one decimal six by ten by two hundred mmpr , nail sixty three mm chequred head , hand hacksaw blade a two hundred fifty by twelve decimal five by sixty three , file three hundred mm bastared rough flat width twenty five mm with handle , firmer chisel short plain fifty mm , flat cold chisel twenty two by two hundred h button head , wire rope steel galvanised for seizing two decimal fifty seven mm , wooden mallet medium , tape insulation twenty five mm , nail double point spiked head , battery one decimal five v dry , tape measuring steel fifteen mtrs in mettalic case , spanner wheel three hundred five mm af

State Government

CTN :41535578

01 Sep, 2025 NA

Chennai - Tamil Nadu

Tender For procurement of fittings 15 items--, elbow bw ss304l 90 deg lr, , material: astm a403 wp 304l, seamless long radius butt weld ends,, , size 8 inch sch 40s equal tee bw ss304, , material: astm a403 wp 304, seamless, butt weld., , size: 8 inch x 8 inch sch.40s, , solar flange ss304l 150psi, , material: a 182 f 304l size 6 inch 150 lb, , tee bw ss304l material a 403 wp 304 l dimensions to ansi b 16.9 butt weld ends,, , size: 6 inch sch 40, , flange slip-on forged steel to astm spec a105 grade ii normalised and machined drilled to asa b16.5 standard 150 lb series raised face bored to suit sch.40 pipe, , size: 3 inch, , flange slip-on forged steel to astm spec a105 grade ii normalised and machined drilled to asa b16.5 standard 150 lb series raised face bored to suit sch.40 pipe, , size: 8 inch, , elbow 90 degree, , material: forged steel ss316l, , dimension: ansi b16.11, , socket weld ends, , size: 1/2 inch 3000 psi, , elbow 90 degree, , material: forged steel ss316l, , dimension: ansi b16.11, , socket weld ends, , size: 3/4 inch 3000 psi, , elbow 90 degree, , material: forged steel ss304l astm a182 f304l ansi b16.11 socket weld, , size: 1 inch 3000 psi, , elbow 90 degree socketweld, forged steel ss304l a182 f304l ansi b16.11 size: 2 inch 3000 psi, , flange sorf ss316l material a 182 f 304l, , size: 1/2 inch 150 psi, , flange sorf ss304l material a 182 f 304l, , size: 3/4 inch 150 lb, , solar flange ss304l 150psi, , material: a182 f 304l, , size: 1 inch 150 lb, , flange sorf ss304l, , material a 182 f 304l, , size: 1-1/2 inch 150 lb, , flange slip-on forged steel, , material a 182 f 304l, , size: 2 inch 150 psi, , as per, astm a 182 f 304l dim.b16.5

CTN :41536090

02 Sep, 2025 4.76 Lacs

Multi City - Karnataka

Tender For material supplay for construction of a kitchen room for the government higher primary school in nagalapura village - item name: flummoxadd 5 for fittings and wastage charges, item name: flummoxadd brush at 1 on cost of paint, item name: flummoxadd brush putty sand paper roller at 1 on cost of paint, item name: flummoxadd brush putty sand paper roller at 5 on cost of paint, item name: flummoxadd cement sand and grit 1 on material, item name: flummoxadd cutting and other wastage 5, item name: flummoxadd handling loading and unloading at 1 on material, item name: flummoxadd handling loading and unloading at 2 on material, item name: flummoxadd hom of welding and grinding machine 4 on material, item name: flummoxadd providing and removing scaffolding at 3 on labour, item name: flummoxadd sundries charges at 1 on labour, item name: flummoxadd sundries charges at 1 on material, item name: flummoxadd sundries charges at 2 on material, item name: flummoxadd watering charges at 1 on labour, item name: flummoxadd watering charges at 1 on material, item name: flummoxadd wire brush fine steel wool putty sand paper at 3 on cost of paint, item name: flummoxbib cock 20mm nominal bore, item name: flummoxbinding wire, item name: flummoxbond stone 20 20 45 cm, item name: flummoxboulders, item name: flummoxbroken stone aggregate 12 mm to 10 mm size, item name: flummoxbroken stone aggregate 20 mm size, item name: flummoxbroken stone aggregate 40 mm size, item name: flummoxcasurina poles 100 150 mm, item name: flummoxcasurina poles 75 100 mm dia, item name: flummoxcoarse sand zone iii, item name: flummoxcudddapah slab 25 cms thick, item name: flummoxenamel metal paint, item name: flummoxfitter class i, item name: flummoxgravel 236 mmmurrum, item name: flummoxhandling loading and unloading 3 on material, item name: flummoxhom of machinaries for planing, item name: flummoxhom of vibrator 071 days, item name: flummoxjungle wood runners and planks, item name: flummoxlabour charges for lifting and placing in position and making connection at 7 on material, item name: flummoxlicenced plumber with tools, item name: flummoxmason class i with tools, item name: flummoxmathinandi wood planks for panels 25 mm thick, item name: flummoxmathinandi wood scantling, item name: flummoxmier concrete 1 cum capacity, item name: flummoxmier concrete small used in culvert, item name: flummoxms flat, item name: flummoxms rods, item name: flummoxover head & other miscellaneous charges, item name: flummoxpainter class i, item name: flummoxpigment, item name: flummoxplastic emulsion paint, item name: flummoxplasticizer super plasticizer, item name: flummoxpolyenthylene water storage tank of specified capacity l, item name: flummoxpolythylene pipes high density 25mm eternal dia, item name: flummoxportland cement, item name: flummoxprimer, item name: flummoxpvc pipe of 4kgcum63 mm, item name: flummoxready mi primer paint ready mi red lead paint, item name: flummoxrubble stones, item name: flummoxsilver oak or equivalent planks 38 mm thick, item name: flummoxsize stone 20 20 25 cms, item name: flummoxsolid concrete blocks 40 20 20 cms400 nsqmm, item name: flummoxtmt bars fe 500, item name: flummoxtractor 40 hp, item name: flummoxvitrified tiles 600600 mm, item name: flummoxwater proofing cement paint, item name: flummoxwelder grade i

CTN :41531457

19 Sep, 2025 NA

Liluah - West Bengal

Tender For supply of stainless steel tubes & double ferrule fittings

CTN :41208812

25 Aug, 2025 NA

Ranga Reddy-T - Telangana

Tender For bid to ras supply of customised signage board , customised flex board , customised glass board , stainless steel boards , stainless steel letters

CTN :41523212

03 Sep, 2025 8.09 Lacs

Haveri - Karnataka

Tender For supply of materials for nrlm work shed bommanahalli grama panchayath hangal taluk haveri dist - display board / cib _bomnn, lumpsum material_bomnn, broken stone aggregate 40 mm size_bomnn, bond stone 20 x 20 x 45 cm_bomnn, rubble stones_bomnn, solid concrete block (40x15x20 cms) 5.00 n or sqmm_bomnn, jungle wood runners and planks_bomnn, casurina poles 75 to 100 mm dia_bomnn, casurina poles 100 to 150 mm_bomnn, silver oak or equivalent planks 38 mm thick_bomnn, binding wire_bomnn, tmt bars fe 500_bomnn, mathi or nandi wood planks for panels 25 mm thick_bomnn, hom of machinaries for planing_bomnn, add cutting and other wastage 5 percentage_bomnn, honnewood planks for panels 20 mm thick_bomnn, honne wood_bomnn, add wire brush, fine steel wool, putty, sand paper, at 3 percentage on cost of paint_bomnn, ready mix primer paint (ready mix red lead paint)_bomnn, fitter class i_bomnn, z section_bomnn, reeded glass 2 mm thick_bomnn, tw beading for fixing glass_bomnn, stays_bomnn, hinges 5 heavy duty_bomnn, handles_bomnn, ms clamps_bomnn, mullion section_bomnn, t section_bomnn, add brush, putty, glue at 5 percentage on cost of paint_bomnn, whitening_bomnn, dry distemper_bomnn, add brush, putty, sand paper at 2 percentage on cost of paint_bomnn, water proofing cement paint_bomnn, mason class ii (with tools)_bomnn, add providing and removing scaffolding at 3 percentage on labour_bomnn, painter class i_bomnn, add brush, putty, sand paper at 3 percentage on cost of paint_bomnn, enamel paint_bomnn, vitrified tiles 600x600 mm_bomnn, white cement_bomnn, ceramic tiles 30 x 30 cms_bomnn, add watering charges at 1 percentage on labour_bomnn, add white cement for pointing at 2 percentage on material_bomnn, add handling , loading and unloading at 2 percentage on material_bomnn, mixer (concrete small used in culvert)_bomnn, border tiles 30 x 10 cms_bomnn, glazed tiles 300x450_bomnn, mason class i (with tools)_bomnn, s or p 100mm trap_bomnn, indian type water closet of size 580 mm of specified make with footrests_bomnn, add white lead paint, gasket, cement, sand for making good the wall and floor at 2 percentage on material_bomnn, lead or pvc connection pipe 32mm dia (for wash basin)_bomnn, c.i. m.s. brackets for flushing cistern_bomnn, brass stop cock_bomnn, cp brass waste 32 mm of standard pattern_bomnn, cp brass chain with plug_bomnn, copper plated brass piller tap 15mm_bomnn, white vitreous china clay flat back wash basin size 550x400mm_bomnn, handling loading and unloading 3 percentage on material_bomnn, labour charges for lifting and placing in position and making connection at 7 percentage on material_bomnn, polyenthylene water storage tank of specified capacity l_bomnn, pvc pipe of 10kg cum,110 mm_bomnn, pvc pipe of 6kg cum,63 mm_bomnn, pvc pipe of 4kg cum,75 mm_bomnn, polythylene pipes high density 32mm external dia_bomnn, add 5 percentage for fittings and wastage charges_bomnn, licenced plumber with tools_bomnn, add cement sand and grit 1 percentage on material_bomnn, bib cock 20mm nominal bore_bomnn, tools and plants at 2 percentage on material_bomnn, hom of cutting and grinding machine_bomnn, mechanic class ii or mechanic hmp grade i or eme grade_bomnn, add_bomnn, hom of welding and grinding machine_bomnn, welder grade i_bomnn, corbon electrodes_bomnn, rms gusset plate_bomnn, ms pipes of 80 mm to 100 mm dia_bomnn, unit cost as per the specification_bomnn, labour charges for handing errection of rcc rings etc. at 5 percentage_bomnn, transportation charges of materials beyond 5 km at 10 percentage_bomnn, fabrication charges_bomnn, cost of 6.5mm m.s. coil_bomnn, add watering charges at 1 percentage on material_bomnn, hom of vibrator 0.71 days_bomnn, mixer (concrete) 1 cum capacity_bomnn, plasticizer super plasticizer_bomnn, portland cement_bomnn, coarse sand (zone iii)_bomnn, broken stone aggregate 12 mm to 10 mm size_bomnn, broken stone aggregate 20 mm size_bomnn, add handling , loading and unloading at 1 percentage on material_bomnn, rcc c

CTN :41523262

10 Sep, 2025 8.08 Lacs

Haveri - Karnataka

Tender For supply of materials for nrlm work shed araleshwar grama panchayath hangal taluk haveri dist - display board i cib_arshl, lumpsum material_arshl, broken stone aggregate 40 mm size_arshl, bond stone 20x20x45 cm_arshl, rubble stones_arshl, solid concrete block (40x15x20 cms) 5.00 n or sqmm_arshl, jungle wood runners and planks_arshl, casurina poles 75 to 100 mm dia_arshl, casurina poles 100 to 150 mm_arshl, silver oak or equivalent planks 38 mm thick_arshl, binding wire_arshl, tmt bars fe 500_arshl, mathi or nandi wood planks for panels 25 mm thick_arshl, hom of machinaries for planing_arshl, add cutting and other wastage 5 percentage_arshl, honnewood planks for panels 20 mm thick_arshl, honne wood_arshl, add wire brush, fine steel wool, putty, sand paper,3 percentage on cost of paint_arshl, ready mix primer paint (ready mix red lead paint)_arshl, fitter class i_arshl, z section_arshl, reeded glass 2 mm thick_arshl, tw beading for fixing glass_arshl, stays_arshl, hinges 5 heavy duty_arshl, handles_arshl, ms clamps_arshl, mullion section_arshl, t section_arshl, add brush, putty, glue at 5 percentage on cost of paint_arshl, whitening_arshl, dry distemper_arshl, add brush, putty, sand paper at 2 percentage on cost of paint_arshl, water proofing cement paint_arshl, add sundries charges at 1 percentage on labour_arshl, mason class ii (with tools)_arshl, add providing and removing scaffolding at 3 percentage on labour_arshl, painter class i_arshl, add brush, putty, sand paper at 3 percentage on cost of paint_arshl, enamel paint_arshl, vitrified tiles 600x600 mm_arshl, white cement_arshl, ceramic tiles 30 x 30 cms_arshl, add watering charges at 1 percentage on labour_arshl, add white cement for pointing at 2 percentage on material_arshl, add handling , loading and unloading at 2 percentage on material_arshl, mixer (concrete small used in culvert)_arshl, border tiles 30 x 10 cms_arshl, glazed tiles 300x450_arshl, mason class i (with tools)_arshl, s or p 100mm trap_arshl, indian type water closet of size 580 mm of make with footrests_arshl, add white lead paint, gasket, cement, sand for making good the wall and floor at 2 percentage on material_arshl, lead or pvc connection pipe 32mm dia (for wash basin)_arshl, c.i. or m.s. brackets for flushing cistern_arshl, brass stop cock_arshl, cp brass waste 32 mm of standard pattern_arshl, cp brass chain with plug_arshl, copper plated brass piller tap 15mm_arshl, white vitreous china clay flat back wash basin 550x400mm_arshl, handling loading and unloading 3 percentage on material_arshl, labour charges for lifting and placing in position d making connection at 7 percentage on material_arshl, polyenthylene water storage tank of specified capacity l_arshl, pvc pipe of 10kg cum,110 mm_arshl, pvc pipe of 6kg cum,63 mm_arshl, pvc pipe of 4kg cum,75 mm_arshl, polythylene pipes high density 32mm external dia_arshl, add 5 percentage for fittings and wastage charges_arshl, licenced plumber with tools_arshl, add cement sand and grit 1 percentage on material_arshl, bib cock 20mm nominal bore_arshl, tools and plants at 2 percentage on material_arshl, hom of cutting and grinding machine_arshl, mechanic class ii or mechanic hmp grade i or eme grade_arshl, add_arshl, hom of welding and grinding machine_arshl, welder grade i_arshl, corbon electrodes_arshl, rms gusset plate_arshl, ms pipes of 80 mm to 100 mm dia_arshl, unit cost as per the specification_arshl, labour charges for handing errection of rcc rings_arshl, transportation charges of materials beyond 5 km 10 percentage_arshl, fabrication charges_arshl, cost of 6.5mm m.s. coil_arshl, add watering charges at 1 percentage on material_arshl, hom of vibrator 0.71 days_arshl, mixer (concrete) 1 cum capacity_arshl, plasticizer or super plasticizer_arshl, portland cement_arshl, coarse sand (zone iii)_arshl, broken stone aggregate 12 mm to 10 mm size_arshl, broken stone aggregate 20 mm size_arshl, add handling , loading and unloading at 1 percentage on material_arsh

Central Government/Public Sector

CTN :41426100

23 Aug, 2025 NA

Ernakulam - Kerala

Tender For supply of procurement of pipe and pipe fittings e e - astm a105 wpb 234 sch 40 90 deg. 1d 100 nb black , bend 50nb astm a 234 wpb sch40 45 deg 1.5d bw carbon steel black , carbon steel bw bend astm a105 wpb 234 sch 40 45 deg. 1.5d 40 nb black , bend 65nb astm a 234 wpb sch40 90 deg 1.5d bw carbon steel galvanized , bend 40nb astm a 234 wpb sch40 45deg 1.5d bw carbon steel black , bend 80nb astm a 234 wpb sch80 90 deg 1.5d bw carbon steel galvanized , bend 50nb astm a 234 wpb sch80 90 deg 1.5d bw carbon steel galvanized , carbon steel bw bend astm a105 wpb 234 sch 80 90 deg. 3d 050 nb galvanized , carbon steel bw bend astm a105 wpb 234 sch 80 45 deg. 3d 050 nb galvanized , flange 20nb ms , flange 50nb gi , flange 80nb gi , 1 inch flange ms , flange ms 40nb , composite flange 80nb gi , composite flange 65nb gi , composite flange 50nb gi , flange soff dn25 pn10 carbon steel astm- a105 dimension std en1092-1 , flange soff dn50 pn10 carbon steel astm-a105 dimension std en1092-1 , flange soff dn100 pn10 carbon steel astm-a105 dimension std en1092-1 , flange soff dn125 pn10 carbon steel astm-a105 dimension std en1092-1 , flange soff dn150 pn10 carbon steel astm-a105 dimension std en1092-1 , flange soff dn65 pn10 carbon steel astm-a105 dimension std en1092-1 , flange soff dn40 pn10 carbon steel astm-a105 dimension std en1092-1 , is 1239 erw steel pipe - galvanized heavy 020 nb , is 1239 erw steel pipe - galvanized heavy 040 nb , is 1239 erw steel pipe - galvanized heavy 050 nb , carbon steel pipe astm a53 gr b seamless sch.80 galvanized 150 nb , carbon steel pipe astm a53 gr b sch.80 black 150 nb , carbon steel pipe astm a53 gr b sch.40 seamless.20 nb black , carbon steel pipe astm a53 gr b sch.40 seamless.25 nb black , carbon steel pipe astm a106 gr b seamless sch.40 black 025 nb , carbon steel pipe astm a106 gr b seamless sch.40 black 040 nb , carbon steel pipe astm a106 gr b seamless sch.80 galvanized 150 nb , carbon steel pipe astm a106 gr b seamless sch.80 galvanized 025 nb , carbon steel pipe astm a106 gr b seamless sch.80 galvanized 040 nb , carbon steel pipe astm a53 gr b sch.40 seamless.50 nb black , carbon steel pipe astm a106 gr b seamless sch.80 galvanized 080 nb cupronickel pipe 90-10 deg - odxthk 133x2.5mm, cupronickel pipe 90-10 deg - odxthk 88.9x2.5 mm, cupronickel pipe 90-10 deg - odxthk 57x1.5mm, cupronickel pipe 90-10 deg - odxthk 76.1x2mm, cupronickel pipe 90-10 deg - odxthk 57x1.5mm, cupronickel pipe 90-10 deg 38mm od x 1.5mm thk., cupronickel bend 90-10 deg od 57mm,thk 1.5mm,90deg,1.5d, cupronickel bend 90-10 deg od 57mm,thk 1.5mm,45deg,1.5d, cupronickel bend 90-10 deg od 38mm,thk 1.5mm,45deg,1.5d, bend 90 deg 1.5d cupronickel 90-10 deg 38 od x 1.5 mm thk, bend45 deg, 1.5d88.9 od x 2.5mm thk.cupronickel 90-10 deg, cupronickel bend 90-10 deg odxthk 133x2.5mm,90deg,1.5d, cupronickel bend 90-10 deg od 133mm,thk 2.5mm,90deg,1d, cupronickel bend 90- 10 deg odxthk 159x2.5mm,90deg,1.5d, cupronickel bend 90-10 deg odxthk 159x2.5mm,90deg,1d, cupronickel bend 90-10 deg od 159mm,thk 2.5mm,45deg,1.5d, cupronickel bend 90-10 deg odxthk 133x2.5mm,90deg,1.5d, cupronickel bend 90- 10 deg odxthk 159x2.5mm,90deg,1d, bend 65nb astm //bid details 2 / 87

Stainless Steel Letter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector