Latest steady arm clamp Tenders | Government steady arm clamp Tenders

CTN :44801715

29 Apr, 2026 NA

Liluah - West Bengal

Tender For supply of capillary sampling point for fsds with clamping assembly for ac coaches to sk no. llh-20/2025, alt-nil. material specification as per drawing. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44760882

10 Apr, 2026 NA

Kapurthala - Punjab

Tender For set of carline for lhb bangladesh non ac chair car coaches note: make/manufacturer of raw material shall be m/s jsl or m/s sail., as per drawing: mp25wecbgcarline version 2, packing instruction: carline assly the supplier shall pack the three c/set (segments) of carlines in a suitably designed robust returnable metallic cage/structure in such a way that carlines shall not get entangle, damaged, twisted, dented during transportation, storage, handling and lifting and to avoid scratches on outer surface suitable environment friendly cushioning material is to be placed between two segments,transit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear approximate 1.5 tonne material load in static & moving condition of three coach set of carline. the bottom part of this packing cage/pallet should be such that curvature profile of bottom carline should match with the profile of packing cage and it can accommodate fork lifter arms for lifting and transportation. it should have standard clamping/fastening mechanism to facilitate easy unpacking & unloading. it should have firm's identification/color mark. the packing cages along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open sky.packing slip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warrantyperiod: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44754801

04 May, 2026 NA

Kapurthala - Punjab

Tender For integerated wtcc., as per drawing: lg10344 alt.'b', packing instruction: 1. the supplier shall pack the integrated wtcc in a suitably designed returnable fixture in such a way that integrated wtcc shall not get scratched, damaged, twisted during transportation, storage and lifting and to avoid scratches on outer surface. it should be wrapped with enviroment friendly material and it should have standard clamping /fastening mechanism so that it can be opened easily. it should have firm's identification mark.2. first returanable fixture along with integrated wtcc be retained by rcf & thisfixture shall be exchanged in the second lot supply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixture from rcf. 3. the packing fixture/frame to be fabricated having sufficient strenght to bear approximate 1 tonne load in static & moving condition of two coach set of integrated wtcc. 4. the fixture /frame/pallet should be designed so that the packed wtcc remain preferably in horizontal position to minimize surface area. 5. it should also be suitable for storage of integrated wtcc under open sky. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44690067

02 Apr, 2026 NA

Kapurthala - Punjab

Tender For set of side wall sheet assembly for vande bharat ndtc coaches., as per drawing: mp25savbndtc version 0, packing instruction: 1. the supplier shall pack the side wall set (minimum one c/set ) in a suitably designed returnable fixture(as per drawing no icf/j&t/misc-2201 alt. `e?) in such a way that side wall shell not get scratched, damaged ,twisted during transportation ,storage and lifting and to avoid scratches on outer surface. it should be wrapped with environment friendly material and it should have standard clamping/fastening mechanism so that it can be opened easily. it should have firm's identification mark . 2. first returnable fixture along with set of side wall shall be retained by rcf & this fixture shall be exchanged in the second lot supply and so on. at the end of the contract , the firm shall collect the remaining returnable packing fixture from rcf. 3. the packing fixture/frame to be fabricated having sufficient strength to bear approx 4 tonne load in static & moving condition of one coach set of side wall. 4. the fixture/frame /pallet should be designed so that the packed side wall remain in vertical/slanting position to minimize surface area and to avoid road bumps. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44690068

02 Apr, 2026 NA

Kapurthala - Punjab

Tender For set of carline for lhb bangladesh non ac chair car coaches note: make/manufacturer of raw material shall be m/s jsl or m/s sail., as per drawing: mp25wecbgcarline version 2, packing instruction: carline assly the supplier shall pack the three c/set (segments) of carlines in a suitably designed robust returnable metallic cage/structure in such a way that carlines shall not get entangle, damaged, twisted, dented during transportation, storage, handling and lifting and to avoid scratches on outer surface suitable environment friendly cushioning material is to be placed between two segments,transit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear approximate 1.5 tonne material load in static & moving condition of three coach set of carline. the bottom part of this packing cage/pallet should be such that curvature profile of bottom carline should match with the profile of packing cage and it can accommodate fork lifter arms for lifting and transportation. it should have standard clamping/fastening mechanism to facilitate easy unpacking & unloading. it should have firm's identification/color mark. the packing cages along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open sky.packing slip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warrantyperiod: 30 months after the date of delivery ]

State Government

CTN :43725176

13 Apr, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : supply of supply of coal feeder spares at gtps d d -head pulley bushing , half coupling for feeder head pulley, moc- carbon steel , seal cover plate for bearing housing of drive roller for 36 inch gravimatric feeder at gtps , bearing cap-housing for head-drive pulley for gravimetric feeder , block for belt take-up pulley, moc-carbon steel , screw for belt take-up pulley, moc-ss 410 , feeder take up mounting ring for 36 inch gravimatric feeder at gtps , feeder take uplocking ring for 36 inch gravimatric feeder at gtps , bearing housing of idle roller for 36 inch gravimatric feeder at gtps , bearing housing with cap for weigh span roller for 36 inch gravimatric feeder at gtps , bearing housing for instrument roller for 36 inch gravimatric feeder at gtps , shear pin torsion cup for clean out conveyer of 36 inch gravimetric feeder. , shear pin dia 8 x 25mm long for coc drive of coal feeder , feeder fire quenching nozzle with connector for 36 inch gravimatric feeder at gtps , end door clamping bolt assembly of coal feeder of unit -3,4 and 5 gtps , guide for sproket of feeder gate for 36 inch gravimetric feeder , pin rack plate for bunker outlet and feeder inlet gate for unit unit no. 3 and unit no. 4 of sikka tps. , set of gear and pinion assembly for gc feeder inlet gate, material - en 19 and key material - ms as per drawing no. stps- bmd-cm-32.

Central Government/Public Sector

CTN :44679088

13 Apr, 2026 NA

Chennai - Tamil Nadu

Tender For supply of 8 way mccb distribution board panel made of thermoplastic polycorbonate ip65 & ik08 rated material. incomer: 250a 4 pole 36ka mccb - 1 no, 230v indication lamp for r, y, and b - 1 set., multifunction meter with current transformer - 1 set., copper busbar of size 20mm x 10mm for r, y, b & n - 1 set. outgoing: 125a 4 pole mccb 18ka - 4 nos., 35 sq.mm terminal blocks - 16 nos., 63a 4 pole mccb 18ka - 4 nos., 16 sq.mm terminal blocks - 16 nos. wall mounting type with clamping arrangements., dimensions: 1600(l) x 1200(h) x 274(d)mm. db make: cape, spelsberg or similar and mccb make - abb, c&s, l&t, havells, siemens, schneider electric, standard, indo asian, legrand or similar [ warranty period:30 months after the date of delivery ]

CTN :42579207

17 Apr, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of sch viii (supply of needle & syringes) - sch viii (supply of needle & syringes), disposable needle sterile length 1/2" guage 25, suture needle, half circle triangular nos. 2 to 20 (cutting), insulated needle for use with peripheral nerve stimulator 22g x 2" x 50 mm., insulated needle for use with peripheral nerve stimulator 22g x 35 mm., insulated needle for use with peripheral nerve stimulator 24g x 1"x 25 mm., echogent needles for usg guided peripheral nerve blocks 20g / 21g x 100 mm., echogent needles for usg guided peripheral nerve blocks 22g x 50 mm., epidural needles 16 & 18 guage 7.5cm to 11cm (disposable), epidural needles (long length) 18g (more than 100 mm. length), sterile disposable lancet size 28-32 (plastic lancet needle type), sterile disposable hypodermic plastic syringe 20cc, cn. with leur lock, hypodermic syringes,disposable sterile, sterile pack,with/without leur lock, hub 1ml syringe with marking at 0.1 ml, asepto syringe 100 ml of heavy plastic barrel and rubber bulb with marking., bag arm rubber with cover for b.p. apparatus, adult size velcro.rubber bag size 13 x 23 cms., keratome, size 2.8 mm, type-regular(ophthalmic), angle-45 degrees, bevel type- bevel up (pointed)blade-stainless steel/carbon steel,handle- polycarbonate, use- disposable single use, mvr, gauge 23g type-regular(ophthalmic), blade-stainless steel handle- polycarbonate, use- single disposable use, triple lumen catheter 7.5fr with 14g distal lumen, length-15cm. kit contain 1 teflon-coated j nitinol guidewire particularly kink-resistant with guide-advancer. 1 dilator, 10cm long, 3 injection caps, 3 clamps,1 supplementary fixation wing,1 scalpel, 1 syringe 5 ml, 1 adaptor for pressure transducer, 1 puncture needle 18g, 70mm long with a pre-connected valve to aviod air embolism and blood loss, 18g short iv cannula, double lumen subclavian/ jugular catheter kit (adult) ptfe (teflon) cannula curved od 2.7/d 11.5fr-12fr/chx5.3in. (3.8 mm x 13.5 cm) 6 side holes silicon tube s clamping extension, clamp luer lock "y" connector with protective caps size 12.5, 15 with guide wire introducer needle, dialator , 3fr double lumen cvc catheter with 60mm double-lumen polyurethane central venous catheter inserted by seldinger technique, radio opaque material for catheter, the user should be able to choose from 2 type of introducer, i.e.needle 23g or i.v. cannula 22g, latex free, the central venous catheter set should contain: 1 double-lumen polyurethane 3fr catheter, 1 short i.v. cannula 22g, 1 introducer needle 23g, 1 kink resistant guidewire with soft flexible tip, dilator with cylindrical /pencil point tip, 1 secondary fixation wing, 2 injection caps, 1 scalpel, 1.5 ml syringe, peripherally placed radiopaque central single lumen catheter. guage 14/16 (100%) (needles size/catheter size) length - 55cm - 70cm, peripherally placed radiopaque central single lumen catheter. guage 18/20 (100%) (needles size/catheter size) length 30cm - 45cm, fully radiopaque pur catheter 16g for femoral artery centimeter marking from 5-15cm, winged hub for skin fixation, supple distal tip. kit should contain 1 pur catheter with xro lines,1 puncture needle, 1 j guidewire with wishbone-type guidewire advancer, 1 dilator, radial/femoral arterial pe catheter with antikinking collar & fixation wings,straight guide wire, introducer needle.catherter size g- 18, length 10cm, radial/femoral arterial pe catheter 20g, 8cm puncture needle is fitted with a visualization chamber allowing to confirm that the vessel punctured is an artery (pulsatile movement of the blood). the needle is also fitted with a silicone bloodless system valve to avoid loss of blood during vessel puncture and a funnel hub to facilitate the insertion of the guidewire, peripherally inserted central catheter with guide wire with peelable cannula, made of polyurethane, non-toxic, with radio opaque line throughout the catheter with marking every cm with leur connector at proximal en

Central Government/Public Sector

CTN :44439491

01 Apr, 2026 NA

Ajmer - Rajasthan

Tender For supply of set consisting of 3 items. - 1) lug bracket as per drg no aak11057 qty - 01 number. 2) bracket for wire rope as per drg no lw36353 qty - 02 numbers - 3) qrv clamping guide plate as per drg no lw36352 - 01 number. - all the material and specifications to be confirmed as per respective drg's & specifications.

Steady Arm Clamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector