Steel X Mas Tree Tenders

Tender For bid to ras supply of equilateral triangular signage board made of 4 mm thick acp size 900mm with angle post of 3 mtr ht and coated in two coats of red oxide and two coats of enamel paint as per irc 67 2022 as per appx a , equilateral triangular signage board made of 4 mm thick acp size 600mm with angle post of 3 mtrs ht and coated in two coats of red oxide and two coats of enamel paint as per irc 67 2022 as per appx b , rectangle signage board made of 4mm thick acp cheveron yellow black rt and lt comb size 600x450mm with post of 3 mtr ht and coated in 2 coats of red oxide and 2 coats of enamel paint as per irc672022 , retro reflective informatory road sign board made of 4 mm thick acp with angle post of 3 mtr height and coated in two coats of red oxide and two coats of enamel paint as per irc 672022 as per appx c , delineator mild xt-red-selected">steel road delineator rectangular fixed size of height 110 cm x width 9 cm , supply fixing and erection of 11pt00 mtr span overhead structure comprising of two verticle posts of 6 mtr ht 300mm nb ms pipe with micro prismatic type iv rr sheeting as per irc 67 2022 as per appx d , reflective sigh board, as per sample attd for design speed 50 kmph size 140 mm or as per table 12 pt1 of irc 67 2022 size of board min 4x3 ft with two angle post of 3 mtr ht as per attd at appx e , providing and fixing stainless xt-red-selected">steel bus stand shelter surface finish enamel paint colour customize colour dimension 20 feet x 6 feet, roof material stainless xt-red-selected">steel , providing and fixing public toilet modular type prefabricated 4 seater size 3x12x7ft mobile toilet with tank capacity 900l , w beam metal crash barrier 4318 mm per set as per irc119 2015 complete set ) /bid number : gem/2026/b/7394067 * /dated: 28-03-2026 & & / bid document 1 / 16

Tender For corrigendum : supply of hot rolled xt-red-selected">steel beam, column, channel and angle sections (v2) conforming to is 808 (q3) , xt-red-selected">steel flat as per is 2062 (q3) , xt-red-selected">steel round as per is 2062 (q3)

Tender For supply of hot rolled xt-red-selected">steel beam, column, channel and angle sections (v2) conforming to is 808 (q3)

Tender For supply, installation and testing of electronic equipments - supply -ece lab equipments, single output regulated dcvariable power supply- input voltage: 230v / 50hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., dual output regulated dc variable power supply- input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator - frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v, digital ic trainer kit with breadboard - +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie- points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulseper press)., dc voltmeter(digital) - dc digital voltmeter - 3 digit led/lcd display, measurement range: 0 20 v dc,accuracy: class 0.5( 0.5 % full-scale), dc ammeter - dc ammeter digital - 3 digit led/lcd display, measurement range: 0 5 a dc,accuracy: class 0.5 ( 0.5 % full-scale), lvdttrainer kit - ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain gauge trainer kit - ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. instrumentation amplifiers with 3 digit display for strain / output voltage. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual., ask modulation and demodulation kit - message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz,amplitude 5 v. carrier signal: sine wave, frequency 200 khz, amplitude 5 v. supply voltage (board): +12 v, +5 v dc. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., fpga trainer kit - must use industry-standard mid-range fpga device usb-jtag programmable, compatible with vivado ise (webpack). power supply: 5 v dc through usb or external adapter. on-board peripherals: leds, switches, push buttons, 7-segment display,clock source, gpio / pmod expansion ports, uart, vga / hdmi, usb- uart bridge, usb cable. user manual., measurement scale: a vertical xt-red-selected">steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

Central Government/Public Sector

Tender For auction sale of depot ferrous scrap - scrap released mix xt-red-selected">steel scrap link, cbc, brack beam, adopter, draft gear, buffer plunger, knuckle, lock pieces, pivot body cut pieces, truss bar, boxn door, cond. dv, fire extinguisher cylinder, ms xt-red-selected">steel scrap, cut plate, ms cut angle/channel of wagon body and cond. ms almirah, some solid, ms scrap from c and w fitting, coil springs of various sorts and sizes.

Central Government/Public Sector

Tender For brushless 110v dc fan 400 mm sweep fixed type to rdso specification no. rdso/pe/spec/tl/0021/2005, (rev.3) with amendment no.1 with stainless xt-red-selected">steel guard. (1) firm to supply 1 no. each of male connector with cage clamps similar to catalogue no. 721-603 and female connector withcage clamps similar to catalogue no. 721- 103/026-000 of wago (2) clause no.4.11 of the above specification shall be read as paint less stainless xt-red-selected">steel fan guard crash worthy design shall conform to coil of icf drawing no. icf/sk-7-6-158, alt.h. (3) the colour of the rating plate shall be black. (4) the fan shall be supplied in assembled condition in individual carton box with suitable packing. (5) guard round plate shall have indian railway logo as per rdso/sk/csc-1124a (but maximum dimensions scaled down to 60 mm dia.) and not the name of the manufacturer. (6) rubber packing to icf drawing no. icf/sk 7-3-058 / item-2, alt.e shall be supplied along with fans. (7) the connecting leads shall be 1.5 sq.mm e- beam cable to rdso spec.elrs/spec/elc/0019, rev.4 and 560 mm long, measured from outside the motor body crimped with suitable lug for termination on fly back connector side and fan body side. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

Tender For scope of work (sow) as mentioned in tender and schedule of work( 41 )items as given below ,[1] rprg,duct 55.000 to,[2] disman,fab,str 54.000 to,[3] chng,tube of roof 162.000 m,[4] rprg of receiving chute 11.700 to,[5] disman,pipe,manhole 27.000 ea,[6] disman,fab&ern,damaged str 54.000 to,[7] disman,pipe,ms 7.200 to,[8] ern of pipe,ms 7.200 to,[9] rprg of brg housing 68.000 ea,[10] remove & fix cross beam 32.000 le,[11] rprg,car frame 50.000 ea,[12] rprg of platform 14.400 to,[13] ern,bottom stiffeners of ladle 27.000 to,[14] ern,damaged shell of ladle 23.400 to,[15] ern,top shell complete 22.500 to,[16] rprg,trunion of hot metal ladle 11.700 to,[17] rprg,brick retainers in ladle 36.900 to,[18] disman of concrete 32.400 m3,[19] fab,stand,rack,bin&fencing 18.000 to,[20] ern,stand 18.000 to,[21] disman of damaged str 13.500 to,[22] align,cross travel gearbox&mtr 1.000 ea,[23] streng&fixg,side guard plate 9.000 to,[24] disman,co gas pipe 5.000 to,[25] disman,roller,end stopper housing 2.000 to,[26] fitg,trunion by wldg&finishing 4.000 ea,[27] chng,chrgng spout w/bend plate 18.900 to,[28] dism/fab/ere shell of ldl 22.500 mt,[29] dismantl of recup from bottom shell 15.000 mt,[30] rprg,ladle supporting str 11.250 to,[31] rprg,converter shell 27.000 m2,[32] testing of optical fiber cable 4.000 ea,[33] ultrasonic testng, repaired xt-red-selected">steel ladle 4.000 ea,[34] rprg,pouring out spout shell plate etc 5.400 to,[35] changing nut,bolt&screw f/centrifuge r20 41.000 ea,[36] ern of xt-red-selected">steel/slag car main beam etc 9.000 to,[37] fitg,trunion by wldg&finishing 12.000 ea,[38] rprg,brg housing 13.000 ea,[39] ern,cage bracket,link etc 11.250 to,[40] repair,str frame 22.000 to,[41] align,g/box mtr&base 10.000 ea

State Government

Tender For supply of hot rolled xt-red-selected">steel beam, column, channel and angle sections (v2) conforming to is 808 (q3)

Central Government And Public Sector

Tender For supply of hot rolled xt-red-selected">steel beam, column, channel and angle sections (v2) conforming to is 808 (q3)

Central Government/Public Sector

Tender For corrigendum : supply of hot rolled xt-red-selected">steel beam, column, channel and angle sections (v2) conforming to is 808 , mild xt-red-selected">steel plate conforming to is: 2062 latest, thickness - 6 mm, xt-red-selected">steel grade designation e 250 , mild xt-red-selected">steel plate conforming to is: 2062 latest, thickness - 10 mm, xt-red-selected">steel grade designation e 250 , mild xt-red-selected">steel plate conforming to is: 2062 latest, thickness - 12 mm, xt-red-selected">steel grade designation e 250 , mild xt-red-selected">steel plate conforming to is: 2062 latest, thickness - 16 mm, xt-red-selected">steel grade designation e 250 , mild xt-red-selected">steel plate conforming to is: 2062 latest, thickness - 20 mm, xt-red-selected">steel grade designation e 250 , mild xt-red-selected">steel plate conforming to is: 2062 latest, thickness - 25 mm, xt-red-selected">steel grade designation e 250 , mild xt-red-selected">steel plate conforming to is: 2062 latest, thickness - 32 mm, xt-red-selected">steel grade designation e 250 , mild xt-red-selected">steel plate conforming to is: 2062 latest, thickness - 36 mm, xt-red-selected">steel grade designation e 250 , mild xt-red-selected">steel plate conforming to is: 2062 latest, thickness - 40 mm, xt-red-selected">steel grade designation e 250 , mild xt-red-selected">steel plate conforming to is: 2062 latest, thickness - 50 mm, xt-red-selected">steel grade designation e 250 , ms beam 600 mm x 210 mm as per is 808 , hard plate 12mm as per is 2062 for structural xt-red-selected">steel and is 1730 for dimensions and tolerance , rail, 52kg/m, conforming to indian railway standard specification (sr. no. - t- 12- 96) , m s sheet as per is 1079 (unit - mass) , xt-red-selected">steel chequered plates as per is 3502 (unit - mass)