Latest steel anchor lock Tenders | Government steel anchor lock Tenders

State Government

CTN :40125270

05 May, 2025 70.0 Thousand

Meerut - Uttar Pradesh

Tender For supply of polycarbonate seal - 1- seals should be made of high quality of uv stabilized polycarbonate plastic materials (engineering plastic), which shall give complete visualization of its fixing mechanism and shall show clear indication if tampered and it should not be effected by boiling water etc- the seal must be able to withstand harsh environment direct sunlight exposure.the seal will be tamper evident with double locking system with additional third locking system facility, which works when the double anchor system is put in place with the female part of the seal. the seal should be transparent clear. the seal should be of one- piece polycarbonate body consisting of capsule and double locking anchor having stainless steel twisted wire (two stained) of 20 cm long molded itself in the temper proof seal male part. the wire should be non-corrosive and nonmagnetic made of 304 grades. sequential serial nos. of one alpha and six numeric numbers to be provided on the female part. the seal should have high rise molded logo be embossed of purchaser and companys name one each side of the seal. the provision for tamperproof sticker signature in the field of13.5mm x 21.5mm should be given, as and when the purchaser requires the need for the same for its proper utilization. the sealing arrangement should be such that its original position cannot be restored after any effort of tamper or breaking of the seals. the third lock as said should work as deterrent for opening the main male & female part of the seal.packaging: the seal should be supplied in packet of 100 seals. each packet shall be labeled for following information., 1.1- the seal should have following essential features.a. tamper resistanceb. heat resistance c. environmentally safed. should withstand direct sun light & rain water exposuree. tamper evident: material must show clear sign of tampering when material is compromised by penetration, drilling cutting, bending or pulling etc.f. one end of the wire should be loose and other end of wire should be permanently fixed on the upper part of female body passing thru the male part of sealg. ultra violet ray resistant h. must have third lock to secure male & female part from tampering.the sealing mechanism should be such that it can be sealed without using any pliers or tools. the sealing procedure must be fool proof and there should not any scope of pre tampering/malpractice with sealing wire while sealing.above mentioned essential features of seal must be verified by approved laboratory test report including melting point test, boiling water test, temperature with stand test etc.construction: one piece construction comprising of polycarbonate capsule & anchor and integrally connected pin part lock & non corrosive & nonmagnetic 2 strand twisted stainless steel sealing wire, all these features molded into one piece {called seal}capsule: contains and internal locking mechanism which accepts the anchor and permanently secure the sealing wire.anchor: the locking cap shall have double anchors, which secures the loose end of the sealing wire into the capsule locking mechanism.pin lock: lt is molded in the seal at time of manufacturing of the said seal and passes. through female part and locks the male part and secures the seal at the operational level

Central Government And Public Sector

CTN :40100136

07 May, 2025 27.03 Lacs

Gadag - Karnataka

Tender For supply of stationary items to gims gadag - pencil sharpner pcs., pencils pcs., pen drive 64 gb., file flags colors., cloth envelops fs size with print., envelops with print 11x5., envelops with print 9x4., file tags 500 pcs packing, single board file rekki file., thick files with print., files wrapers thin with print., king size note book 200 pg., stock register book 200 pg., cash book 200 pg., ledger book 200 pg., motar log book 200 pg., attendance register 200 pg., attendance register 100 pg., bond register 300 pg., bond register 200 pg., bond register 100 pg., carbon paper box a4 size., a4 colour paper fs size 75 gsm rimonly opd/ipd/ lab/report., ligal fs sige paper 70 gsm., a4 paper 70 gsm rim., double hole punch., singal hole punch., calculated desk type big. , wax seal 8 gross 175 gram pack., match box 10x1 1box, biscuits., fruity., shaving blades 10x1 1box, plastic weir thread., battares cells., pencil cells., stamp pad ink 25ml., brown tixo tape 2 inch., white tixo tape 2 inch., stapler pins 24x6 nos., stapler pins no 10., color chock box dustless., white chalk box dustless., white board marker., permanent marker big., marker pen small cd-dvd marker., highlighter pen., whitner pen correction pen., gum bottel 150 ml white., eraser rubber pcs., hawayi rubber slippers., gum shoes, size-8 9 no, shaving razor steel., dustbins big with lid 25kg., dustbins big with lid 75kg., square box fiber., plastic mug., plastic buckets 15 ltr capacity., duste.r, exam pads., locks medium size 6 lever 50mm., paper cutting scissior., plastick office tray., stamp pad small., calling bell., metal asd plastic scale., stapler 24x6 nos., stapler no 10., candl.e, tissue. paper roll., tissue. paper., laryngoscope cells., t type pins 45 grams., indent book with print., box. files

CTN :40071722

08 May, 2025 NA

Jalpaiguri - West Bengal

Tender For supply of furniture articles / items - godrej steel almirah (78" x 35" x 19") four fixed shelves painted 20 gauge color -ash / brown, raj & raj steel almirah (78" x 35" x 19") four fixed shelves painted 20 gauge color -ash / brown, khaitan steel almirah (78" x 35" x 19") four fixed shelves painted 20 gauge color -ash / brown, local made non-branded steel almirah (78" x 35" x 19") four fixed shelves painted 20 gaugecolor -ash / brown, godrej steel almirah (50" x 30" x 17") three fixed shelves painted 20 gauge color -ash / brown, raj & raj steel almirah (50" x 30" x 17") three fixed shelves painted 20 gauge color -ash / brown, khaitan steel almirah (50" x 30" x 17") three fixed shelves painted 20 gauge color -ash / brown, local made non-branded steel almirah (50" x 30" x 17") three fixed shelves painted 20 gauge color -ash / brown, godrej half secretariat table (48" x 24" x 30") steel tabulbar frame (24 gauge) with sunmica top and three side drawers(with 24 gauge sheet) with locks and fully painted., raj & raj half secretariat table (48" x 24" x 30") steel tabulbar frame (24 gauge) with sunmica top and three side drawers (with 24 gauge sheet) with locks and fully painted., khaitan half secretariat table (48" x 24" x 30") steel tabulbar frame (24 gauge) with sunmica top and three side drawers (with 24 gauge sheet) with locks and fully painted., local made non-branded half secretariat table (48" x 24" x 30") steel tabulbar frame (24 gauge) with sunmica top and three side drawers(with 24 gauge sheet) with locks and fully painted., godrej full secretariat table (60" x 36" x 30") steel tabulbar frame (24 gauge) with sunmica top and three side drawers (with 24 gauge sheet) with locks and fully painted., raj & raj full secretariat table (60" x 36" x 30") steel tabulbar frame (24 gauge) with sunmica top and three side drawers (with 24 gauge sheet) with locks and fully painted., khaitan full secretariat table (60" x 36" x 30") steel tabulbar frame (24 gauge) with sunmica top and three side drawers (with 24 gauge sheet) with locks and fully painted., local made non-branded full secretariat table (60" x 36" x 30") steel tabulbar frame (24 gauge) withsunmica top and three side drawers (with 24 gauge sheet) with locks and fully painted., godrej excutive tables (72"x48"x30") steel frame with three drawers and a tray on one side and a cup board with one shelf on the other side with door and handle, sunmika top, full painted., raj & raj excutive tables (72"x48"x30") steel frame with three drawers and a tray on one side and a cup board with one shelf on the other side with door and handle, sunmika top, full painted., khaitan excutive tables (72"x48"x30") steel frame with three drawers and a tray on one side and a cup board with one shelf on the other side with door and handle, sunmika top, full painted., local made non-branded excutive tables (72"x48"x30") steel frame with three drawers and a tray on one side and a cup board with one shelf on the other side with door and handle, sunmika top, full painted., godrej excutive revolving chair-high back godrej type (5 wheels balls) {for superior officer}, raj & raj excutive revolving chair-high back godrej type (5 wheels balls) {for superior officer}, khaitan excutive revolving chair-high back godrej type (5 wheels balls) {for superior officer}, local made non-branded excutive revolving chair-high back godrej type (5 wheels balls) {for superior officer}, local made non-branded steel rack (72"x35"x15") with six shelves duly fixed with nut & bolts painted 18 gauges.color -ash / brown., local made non-branded steel rack (35"x35"x15") with three shelves duly fixed with nut & bolts painted 18 gauges. color -ash / brown., local made non-branded steel rack, size 6x7x13" with 5 (five) shelves, heavy type. color -ash / brown, plastic chair with arms- nilkamal - chr 2051, plastic moulded table - cello - luxury, plastic moulded chair - without arms- cello - luxury, godrej composit

CTN :40090922

13 May, 2025 NA

Jaipur - Rajasthan

Tender For supply of supplying and installing prefabricated wall birla aerocon panels 2ft x 8ft , toilet complex to be created for doctors and common people at mi room with complete sanitary fitting to washroom and , 12mm thick toughened glass doors with vinyl film frosting and aluminum handles on both sides. , false ceiling in gypsum boral board 6ft x 4ft also old false ceiling to be removed , 2ft x 2ft vitrified floor tiles supplying and fixing , havelles electrical wiring with 30 power socket switch boards and 50 three pin socket and switches for them , old ac fitting to be removed and new to be redone according to cubicles in , osram 15watt led panels supply and installation. also complete old lights to be removed for constriction and reinstalled after work done. , paint work berger premium inner paint and outside paint of complete complex , artificial corner plants up to 18inches height , inauguration stone to be supplied and fixed to be made in granite slab , lock and key for the cubicles ozem door locks to installed , disposal of building material waste caused during renovation of building bid number/ & ( * ) : gem/2025/b/6149684 dated/ + : 22-04-2025 bid document/ 2 2 1 / 15

Central Government/Public Sector

CTN :39671205

29 Apr, 2025 NA

Aurangabad(Bh) - Bihar

Tender For corrigendum : tender for supply of spares for ipsv and ipcv along with axial locks of lpt blades for ntpc nabinagar - seg ring kit ggmv8030 9 10 11 gepil , clamp rng kit ggmv80305 16 803 30 gepil , clamp rng kit ggmv8030 47 62 803 gepil , cv cylindrical pin ggmv803059 15 alstom , coupling nut ggmv803059 19 alstom , control valve pin ggmv803059 22 alstom , cylindrical pin ggmv803059 18 alstom , axial lock rh4 ggmv800105v0019 204 ge , axial lock rh5 ggmv800105v0019 205 ge , axial lock rh4 ggmv800105v0019 209 ge , axial lock rh5 ggmv800105v0019 210 ge

CTN :39901284

26 Apr, 2025 NA

Jodhpur - Rajasthan

Tender For corrigendum : supply of installation of gym equipment - treadmill , upright exercise cycle , cross trainer elliptical , counter balanced smith machine , hyper extension bench , rubberized weight dumbbells , rubberized weight plates , olympic barbell rod with locks seven feet , olympic barbell rod with locks six feet , olympic barbell rod with locks five feet , olympic barbell rod with locks three feet , olympic barbell rod with locks one feet , olympic size ez curl bar , olympic triceps bar , olympic trapezius 48 inches bar , kettle bell dumbbells two kg , kettle bell dumbbells four kg , kettle bell dumbbells eight kg , kettle bell dumbbells sixteen kg , kettle bell dumbbells twenty four kg , dumbbell rack , rod stand , swiss gym ball forty five cm , swiss gym ball fifty five cm , swiss gym ball sixty five cm , rubber flooring , yoga mats

CTN :40094311

13 May, 2025 NA

Liluah - West Bengal

Tender For supply and fitment of staff locker of ms sheet conforming to quality grade d (new grade cr2 ) of is 513/2008 with amendment no. 1. locker size 2x6x6 (approx) consisting of 12 cages as per size 16 x 24. thickness 22 swg. colour- blue powder coated. locking plate thickness 8 mm with 16 mm hole, 38 m m square type locks with key for each cage. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40065099

28 Apr, 2025 NA

Haridwar - Uttarakhand

Tender For tender for supply of insrt helcoil - high resistance series threade d insert with 4 key locks , internal thread size-m16(x2) , external thread size-m22(x1.5) length 22(+/-0.3) mm , tolerance class for internal thread-6h & for external thread-6(small-g ) , lower tolerance classes acceptable. material- aisi 303 , passivation , make- kipp or other size- pn-210027400 , insert knm 8x1.25 , standard , internal thread size- m8x1.25 , internal thread class-5h , external thread size-m12x1.25 , external thread class- 4(small-h) , insert material- stainless steel- aisi 303 , finish- passivation size- p/n-210027352 , heli-coil m6x1 1.5d material- stainless steel 18/8austenitic grade finish- passivated size- p/n 210602535 , drg- 210002530 rev-00 heli-coil , m2.5(x0.45) x 1.5d , odmax 3.5 & od min 3.3 , no. of turns 5.9 , matl 18/8 auste ntic steel , finish passivated , heli-coil , m12x1.75x1.5d , od max 14.8 & od min 14.4 , no. of turns 8.4 , matl 18/8 au stentic steel , finish passiv ated.size- 210002542 , heli-coil , m5x0.8 - 1 d , od ma x 6.6 & od min 6.35 , no. of tu rns 4.3 , matl 18/8 austent ic steel , finish passivated. size- p/n 210602504 , 210002504 , heli-coil , m6x1.0 - 1.5 d , od max 7.85 & od min 7.6 , no. of turns 6.9 , matl 18/8 aust entic steel , finish passivated. size- p/n 210602535 , 210002535 , heli-coil , m2.5x0.45 - 1 d , od max 3.5 & od min 3.3 , no. of turns 3.5 , matl 18/8 auste ntic steel , finish passivated. size- p/n 210002500 , heli-coil , m10x1.5 - 1.5 d , od max 12.5 & od min 12.1 , no. of turns 8.1 , matl 18/8 auste ntic steel , finish passivated. size- p/n-210002539 , heli-coil , m6x1.0 - 1 d , od ma x 7.85 & od min 7.6 , no. of turns 4.2 , matl 18/8 auste ntic steel , finish passivated. size- p/n 210602505

State Government

CTN :40075743

06 May, 2025 4.07 Lacs

Shimoga - Karnataka

Tender For supply of printing & stationery to kuvempu university shankaragatta shimoga - attendance book. 24 sheets 48 pages with thick cover page (str), carbon sheets black/blue 210 mm x 330 mm (per box)(100 sheets) (str), cloth lined covers with printing size16 x 12 1st quality (each cover) (str), colour papers covers with printing 11 x 5 (each cover) (str), formats printing in 60 gsm paper a4 size single side print (per 100 sheets pad) (str), formats printing in 60 gsm paper a4 size double side print (per 100 sheets pad) (str), paper duplicating full scape size (per ream)- 70 gsm 2.3kg (str), paper duplicating a4 size (per ream) 70 gsm 2.3 kg (str), paper- green , yellow, blue, pink, maplitho 80 gsm cut sheets .25size (21.3 k.g.) (per ream) (str), paper xerox a4 size 80 gsm (per ream) (str), paper xerox a3 size 75 gsm (per ream) (str), paper xerox full scape 75 gsm (per ream) (str), pre-printed envelops 9 x 4 (per 1000) (str), pre-printed envelops 11 x 5 (per 1000) (str), pre-printed envelops 11 x 5 window (per 1000) (str), pre-printed envelops 16 x 12 (per 1000) (str), pre printed file wrapper size 13 x 10 craft paper for 1000 sheets (str), pre printed file opening sheets white paper 70 gsm size 8 x 12.5 (100 sheet each pad) (str), pre printed file continuation sheets white paper 70 gsm size 8 x12.5 (100 sheets each pad) (str), bell pin per kg (100 gm x 10 box) (str), gem clips- per kg (100gm x 10 box) (str), stapler pin box no. 10 (pkt. each) (str), stapler pin box no. 24/6 (pkt. each) (str), stapler pin box heavy duty (pkt. each) (str), coffee colour paper gum tape size 1 (60 mtr role) (str), glue stick gum 15 gm (str), gum camel 300 ml (each) (str), gum camel 700 ml (each) (str), gum tape per roll 2 (60mtr per each role) (str), gum tape per roll 3 (60mtr per each role) (str), toner cartridge for printer (model q 2612 a (str), toner cartridge for printer (model 1020 toner 12 a ) (str), color printer (black) (per toner) (model a3060 ) (str), colour printer toner npg 67 yellow, cyan, megenta (str), colour printer toner npg 67 black (str), printer toner p1007- 388a (per toner) (str), laserjet 328 (per toner) (str), laserjet 36a (per toner) (str), xerox toner ar-6020 (str), xerox toner ar-6031n (str), xerox toner ar-m205 (str), candle all size (per kg) (str), cd writer pen (str), cloth bags kora cloth size 47 x 39 cm each bag(str), cleaning liquid spray bottle 500 ml (str), dusters- per 10 pieces cot wool (str), eraze ex- 15ml pen type each (str), godrej locks navtal 6 livers (3 keys) per lock (str), godrej locks navtal 7 livers (3 keys) per lock (str), marker pen standard size each (str), napthalin balls (per kg) (str), pen stand with 2 pens golden colour (str), pen stand day and date with pens golden colour (str), paper weight glass (str), paper cutter blade small (str), pen gel 0.7 blue , black, green (str), pen (highlighter) (str), pencil per box standard size (str), piece of chalk non dust white per box (str), piece of chalk non dust colour per box (str), pin cushion with magnet size small (str), plastic dust bin medium plain or netted (str), plastic office tray per piece (str), poker (str), punching machine single hole 280 (small) (str), rubber band all sizes per kg (str), scale plastic 30 cm (str), scale steel 30 cm (str), scissors medium 165 m (str), sketch pen box regular (str), calling bell (str), stamp pad size medium (str), stamp pad size big (str), stamp pad ink bottle blue 100 ml (str), stapler no. 10 (standard) (str), stapler no. 24/6 (str), stapler heavy duty (str), stapler hp 45 with handle (str), tags (per 1000) ist quality size 10 (str), thapal box big (str), water sponge (str), twain tread (chaladuri) (per kg) (str), cds recordable/ re-writable 700 mb (str), computer usb pen drive 32.0 gb (str), computer usb pen drive 64.0 gb (str), calculator ct 555 (str), calculator mt 120 (str), file board size 14 x 10 3 pounds (str), board file 14 x 10 (str), file (lever files) (str), registers deluxe 60 gsm 4 quire (str), r

CTN :40049441

23 Apr, 2025 NA

Krishnanagar - West Bengal

Tender For supplying of wooden items for the newly renovated suit rooms at new circuit house, nadia - supply, fitting & fixing including transportation charges of the king-size bed (6x7) with the following specifications: a) made from high-quality durable cp solid teak wood b) hydraulic lifting system for under-bed storage with drawers on both sides c) solid wood slats for optimal mattress support with a back support of 4ft height d) polished finish (pu) for refined look and safety standards e) includes two side tables of the same material for storage and aesthetic appeal , supply, fitting & fixing including transportation charges of cupboard with the following specifications: a) made of premium-quality teak wood (cp segun) b) dimensions: 3.0 ft width x 2.5 ft height x 1.50 ftlength c) multiple shelves and smooth, sturdy doors with quality hinges d) treated and polished wood for durability and finish e) stable structure for long-lasting use , supply, fitting & fixing including transportation charges of dressing table with the following specifications: a) crafted from high-quality cp solid teak wood (cp segun) b) dimensions: 6 ft length x 2.5 ft width x 1.25 ft length c) large mirror and multiple drawers for organized storage d) polished smooth finish for durability and refined look , supply, fitting & fixing including transportation charges of almirah with the following specifications: a) made from premium-quality teak wood (cp segun) b) dimensions: 6 ft height x 4.5 ft width x 1.75ft length c) multiple shelves and hanging rods for clothes, sturdy doors with secure locks d) treated and polished wood for finish and durability e) strong structure ensuring long-lasting stability , supply, fitting & fixing including transportation charges of tea table with the following specifications: a) made from high-quality teak wood (cp segun) b) dimensions: 2.5 ft height x 4.5 ft length x 1.75 ftwidth c) includes both closed and open storage zones d) treated and polished (pu) for durability and wear resistance , supply, fitting & fixing including transportation charges of tv showcase with the following specifications: a) crafted from premium cp solid teak wood b) dimensions: 2.5 ft height x 5.5 ft length x 1.75 ftwidth c) includes both open and closed storage zones d) polished (pu) wood finish for refined look and long-lasting performance , supply, fitting & fixing including transportation charges of cp solid teak wooden study table with chair with the following specifications: a) classic vintage design with detailed craftsmanship b) table dimensions: 48 inches width, 24 inches depth, 30 inches height c) hutch with open shelves and drawers for document organization d) paired with a sturdy wooden chair (cp segun)of 18 inches seat height

Steel Anchor Lock Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government