Latest steel bar Tenders | Government steel bar Tenders

State Government

CTN :43016746

23 Dec, 2025 5.05 Lacs

Sundernagar - Himachal Pradesh

Tender For supply of steel bars 8 mm dia , steel bars 10 mm dia , steel bars 12 mm dia , ms channel 74 x 40 x5 mm medium , isa 25 x25x 3 mm , isa 40 x40x 5 mm , ms tee 40x25x3 mm , ms flat 25x3 mm , gi wire 8 swg , ms plate 14 mm thick , ms pipe 1 and 1 fourth inch dia , barbed wire , m s plate 1and half mm thick

State Government

CTN :43013330

12 Dec, 2025 NA

Unnao - Uttar Pradesh

Tender For supply of galvanized steel barbed wire for fencing (v2) as per is 278 (q2)

State Government

CTN :43022632

13 Dec, 2025 88.04 Lacs

Rajandgaon - Chhattisgarh

Tender For supply of galvanized steel barbed wire for fencing (v2) as per is 278 (q2)

State Government

CTN :43020199

12 Dec, 2025 78.82 Lacs

Dhamtari - Chhattisgarh

Tender For supply of galvanized steel barbed wire for fencing (v2) as per is 278 (q2)

State Government

CTN :42441301

17 Dec, 2025 12.55 Lacs

Tapi - Gujarat

Tender For corrigendum : supply of various pumps mechanical seal, coupling, gland packing and rubber items for bmd-6 500mw utps unit-6.(et-6128 bmd-6) - mechanical seal for m/s.tushaco pumps make air pre heater lub oil pump model:,t3s-25/46 shaft dia-15mm ,rpm:1450, dis pressure : 5 kg/cm2 , fluid:oil servo cycle 680 temp-90?c ,faces: c/sic, hardware in ss316 without gland plate, mechanical seal for m/s.tushaco pumps make i d fan lub oil pump model:,t3s-25/38 shaft dia-15mm ,rpm:1450, dis pressure : 5 kg/cm2 , fluid:oil servo prime 68, temp-90?c ,faces: c/sic, hardware in ss316 without gland plate, mechanical seal for n-pit pump model :wpe/wpil 40/260,shaft dia-44.5mm ,rpm:2900, dis pressure : 10.0kg/cm2 , fluid : water (5 to 11.00 ph value) temp-ambiant , faces: c/ sic, hardware in ss316 along with ss 316/cf8m gland plate, mechanical seal assembly for dm regeneration pump model wp/40/320 of 500mw unit-6, mechanical seal assembly for dm water transfer pump model wp 65/320 for 500 mw, mechanical seal asslly. for flowmore make dm water make up pump fig.k5922 -100 x 80, rubber spider for love joy coupling for l-70, rubber spider (star bush) for love joy coupling l-075, rubber spider (star bush) for love joy coupling l-095, rubber element/ spider for love joy coupling size-l-100, rubber spider for love joy coupling size l-110, rubber spider for love joy flexible coupling size: sw-110, rubber element set for jaw flexible coupling size : swq -226/140, rubber spider (star bush) for love joy coupling l-150, love joy coupling size l-075, lovejoy make jaw- flex coupling with rubber spider, size- l 95 (aluminum), ms love joy coupling l- 100, ms love joy coupling size l-110, love joy make flexible coupling with pilot bore size rrs-110 spacer length 140., jaw flexible coupling size: swq -226/140, moc: cast iron, bore: pilot bore., lovejoy coupling size rrl-150 (c.i.), 100per. neopren rubber diaphragm 25 nb for d.m.plant, 100per. neoprene rubber diaphragm 40 nb for d.m.plant, 100per. neoprene rubber diaphragm 50 nb for d.m plant, neoprene rubber diaphragm for 65 mm r.l.dia valve, neoprene 100 per. pure rubber diaphragm 80 mm, neoprene 100 per. pure rubber diaphragm 100 mm, neoprene 100 per. pure rubber diaphragm 150 mm, 100per. neoprene rubber sheet size 1 mtrx2 mtrx3 mm thick, 100per. neoprene rubber sheet size 1 mtrx2 mtrx5 mm thick, 100per. neoprene rubber sheet,size-1.5 m x 2 m x 2mm thick, oil seal 50 x 68 x 8 mm fenner make, oil seal size 19x32x7 mm, oil seal size:30x50x7 mm, oil seal size 30x40x7 mm, neoprene oil seal size 35 x 47 x 8 mm, oil seal size:35x47x7 mm, oil seal size 45 x 60 x 10 mm fanner/pioneer/sunny, non asbestos, ptfe, graphite gland packing for water application, square in cross section suitable to temparature 280 deg c & pressure 250 bar size :: 6mm, non asbestos, ptfe, graphite gland packing for water application, square in cross section suitable to temparature 280 deg c & pressure 250 bar size :: 8mm, non asbestos, ptfe, graphite gland packing for water application, square in cross section suitable to temparature 280 deg c & pressure 250 bar size :: 10mm, non asbestos, ptfe, graphite gland packing for water application, square in cross section suitable to temparature 280 deg c & pressure 250 bar size :: 12mm, non asbestos, ptfe, graphite gland packing for water application, square in cross section suitable to temparature 280 deg c & pressure 250 bar size :: 16mm, teflon round bar , 300 mm long x 30 mm dia., teflon round bar , 300 mm long x 50 mm dia., teflon round bar , 300 mm long x 80 mm dia.

Central Government/Public Sector

CTN :42883195

09 Dec, 2025 NA

Haridwar - Uttarakhand

Tender For corrigendum : supply of galvanized steel barbed wire for fencing (v2) as per is 278

Central Government And Public Sector

CTN :43015451

30 Dec, 2025 NA

Angul - Odisha

Tender For supply of high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786 (q2)

corporations/Associations/Others

CTN :42485358

15 Dec, 2025 55.80 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type c (qty:10) - digital radiography system 50kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

corporations/Associations/Others

CTN :42485371

15 Dec, 2025 75.33 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type b (qty:10) - digital radiography system 80kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

Central Government/Public Sector

CTN :43000419

13 Dec, 2025 97.5 Thousand

Dhanbad - Jharkhand

Tender For fabrication of iron material and making power distribution panel size 3ft x 2ft with supply and installation of all accessories mccb, indicator, ampere and volt meter, frequency meter, bus bar etc. at area office kusunda area

Steel Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors