Latest steel beam Tenders | Government steel beam Tenders

Central Government And Public Sector

CTN :42123496

21 Oct, 2025 67.01 Lacs

Najibabad - Uttar Pradesh

Tender For supply of materials and job work under the work of mc ew c of am special repair to conservation and restoration of entrance gateway of portion of old palace najibabad bijnor 2025 26 - items to be executed, u.s. lime, surkhi, coarse sand, lakhori brick, brick aggregate, sal wood, belgiri, gum, gur, demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineer- in-charge., demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 15.2.1 nominal concrete 1:3:6 or richer mix (including equivalent design mix), demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in charge. 15.7.4 in cement mortar, taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :15.13.1 of area 3 sq. metres and below, dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : 15.14.1 of sectional area 40 square centimetres and above, providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in charge. note:- (1) the elevational area of the scaffolding shall be measured for payment purpose. (2) the payment will be made once only for execution of all items for such works. ( including errection & dismental after work), disposal of rubbish/malba heap,soil etc. from monument to outside of municipal limit by tractor trolly including excavation loading and unloading etc.requirement proper completion of work at monument /site, provision for providing & making lime slacking & mortar pit by means of pit excavation, brick masonry & plastering over it. the size of the over all pit is 8.00m x 3.00m & depth is 0.90m. the pit is divided in to three parts & cement plaster, painting (two or more coats on new work) with oil type wood preservative of approved brand and manufacture, painting(one or more coats) with black japan paint of approved brand and manufacture to give an even shade

State Government

CTN :42093267

06 Oct, 2025 NA

Pune - Maharashtra

Tender For supplying electrical material for grampanchayat at manjari khurd tal haveli dist pune - electrical material, 50 watt flood light led, 20 watt flood light led, chock 14 w, chock 24 w, chock 36 pl, chock 3 pl 36w tube, bed switch, holder pl, pole clamp, steel grip tcp, 200 amp copper fuse, pendent holder, meter box 10*12, 36 w led tube, dp switch anchor, 2.5 sq.mm aluminium service wire, 4 sq.mm aluminium service wire, 6 sq.mm aluminium service wire, 10 sq.mm aluminium service wire, 63 amp d.pole mcb, 16 amp d.pole mcb, 6-32 amp s.pole mcb, 24 watt street light led, 36 watt street light led, 50 watt street light led, 100 watt street light led, 100 watt led flood light, led driver 36 watt, 33mm gi pie 2 ft, 40 mm gi pipe 3 ft, mcb box, ss combine 6/16a, led bulb 30 watt, led bulb 50 watt, tester, fuse 16 amp, fuse 32 amp, cement pole clamp, ms pole clamp, 18 watt led bulb, screw driver, plyer, bell, call bell, gang box, rccb, mccb, cooper patti, mani, kit kat 100 a, kit kat 32a, kitkat 63a, 1.sqmm wire, 1.5sqmm wire, 2.5 sqmm wire, 4 sqmm wire, 2.5 sqmm 3 core cable, 1.5sqmm 3 core cable, 2.5 sqmm 2 core cable, 6 sqmm 4 core cable, 6a switch, 6a socket, 16a socket, 16a switch, cooper lugs, aluminium lugs, waterproof tape, fan regulator, fan capacitor, extension board, 4 pole mcb

Central Government/Public Sector

CTN :41881033

07 Oct, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of slotted pan head tapping screw with a thread size of st 4.8, nominal length of 25 mm, type-c, made of steel in accordance with iso 2702 with cr/cd/ni plating, confirming to is 7173 : 2018 (re-affirmed %u2013 2023).material should be steel in accordance with iso 2702 mentioned in table%u2013 2.

Central Government/Public Sector

CTN :42145697

09 Oct, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of wheel distance measuring gauge as per following specn:- length: 1596 +/- 0.5mm (range 1585 to 1605mm) for meserment . accuracy : 0.1mm through vernier scale. setting : must set 90 degree to the flange . parallelism : to the main axle prospective of track level which should be indicated by the same equipment . material: hard extruted steel tube with 1.2mm thickness.

State Government

CTN :42061405

06 Oct, 2025 NA

Ernakulam - Kerala

Tender For purchases for open gymnasium - purchase of items for open gym, air walker,pipe make:- jindal / tata,combination equipment made up of b class gi pipe of different nb. nb stands for nominal bore size i.e. internal diameter of pipe in millimeters.100mm nb:- main frame. 80mm nb:- standing twister support. 32mm nb:- air walker pedal, leg press seat, standing twister base, support. 25mm nb:- leg press footrest support, air walker handle, standing twister handle.c channel of 38 x 73 x 4.5mm:- bottom support frame.ms plate of 8mm:- leg press profile, air walker pedal l-bend. 60mm seamless pipe:- bushes. 70mm seamless pipe:- bushes. ms sheet of size 330 x 300 x 1.8mm:- seat and backrest. ms plate of 245 x 113 x 2.8mm:- footrest support. ms round plate of 298 x 9mm:- standing twister plate. hdpe / ppcp plastic:- closing caps, leg press footrest. ms bright material:- pins made of 35mm, 25mm. bearings:- permanent lubricated bearings 6007 , 6205 of reputed brand are used. bearings end cap:- made up from nylon material. stopper:- stopper (bushes) used are made from poly urethin material of 50mm. nut & bolts:- high tensile steel with galvanised nut & bolts are used. circlips:- the circlips are used for locking is made up of a34, a24 & a16. powder coating:- the powder coating done with pure polyster powder of ackzonoble or berger with 60 to 70 micron thickness., chest press, length:- 1550mm, width:- 710mm, height:- 2150mm, safe area:- 3.0 mtr x 1.7 mtr, chest press equipment made up of b class gi pipe of different nb. nb stands for nominal bore size i.e.internal diameter of pipe in millimeters. 100mm nb:- centre pipe. 80mm nb:- foundation main pipe. 32mm nb:- handle frame duly bend, seat frame duly bend, support. 25mm nb:- connecting links, handle. ms angle 23 x 23 x 1.8mm:- foundation support frame. ms pipe 19 x 38 x 1.8mm:- foundation support frame. 50mm seamless pipe:- bushes. 60mm seamless pipe:- bushes. ms sheet of size 330 x 300 x 1.8mm:- seat and backrest. hdpe / ppcp plastic:- closing caps, base cover. ms bright material:- pins made of dia.25mm & dia.17mm. bearings:- permanent lubricated bearings 6205 & 6203 of reputed brand are used. bearings end cap:- made up from nylon material. nut & bolts:- high tensile steel with galvanized nut & bolts are used. circlips:- the circlips are used for locking is made up of a24 & a16. handle grips:- handle grips are made up of high quality rubber material. powder coating:- the powder coating done with pure polyster powder of ackzonoble or berger with 60 to 70 micron thickness., double standing twister,length:- 1800mm, width:- 540mm, height:- 1430mm, safe area:- 3.0 mtr x 1.0 mtr, seating & standing twister equipment made up of b class gi pipe of different nb.nb stands for nominal bore size i.e. internal diameter of pipe in millimeters. 100mm nb:- centre pipe. 80mm nb:- standing twister plate support, foundation main pipe. 50mm nb:- seating twister plate support. 32mm nb:- bottom frame, support. 25mm nb:- handle frame ring, foot resting frame. dia. 125mm od with 5mm thickness:- handle sleeve pipe. ms angle 23 x 23 x 1.8mm:- foundation support frame. ms pipe 19 x 38 x 1.8mm:- foundation support frame. ms round plate of 298 x 9mm:- twister plate. 70mm seamless pipe:- bushes. ms flat 38 x 9mm:- bottom frame. hdpe / ppcp plastic:- closing caps. ms bright material:- pins made of dia.45mm & dia.35mm. bearings:- permanent lubricated bearings 30206 , 6205 & 6007 of reputed brand are used. nut & bolts:- high tensile steel with galvanized nut & bolts are used. handle grips:- handle grips are made up of high quality rubber material. powder coating:- the powder coating done with pure polyster powder of ackzonobleor berger with 60 to 70 micron thickness., leg press, length:- 1700mm, width:- 380mm, height:- 1550mm, safe area:- 2.8 mtr x 1.4 mtr, leg press made up of b class gi pipe of different nb. nb stands for nominal,bore size i.e. internal diameter of pipe in

corporations/Associations/Others

CTN :42063030

06 Oct, 2025 1.00 Crore

Kashipur - Uttarakhand

Tender For supply of electric slaughterhouse (for animals) - primary & secondary chamber primary chamber* single chmber furnace of size 4270 mm x 1980 mm x 1820 mm.* plate thickness- 5 to 8 mm.* lining of interior of furnace- 400 mm wall cermaic blanketk, high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006* operation temperature- 800o c to 1000o c.* top smoke discharge for secondary chamber.* ash removal doors to be provided for ash collection after combustion.* ingtion- automatic.* temperature control- automatic* material loading- front gate- automaticsecondary chamber* operating temperature - 1050o c to 1250o c.* material of construction- mild steel with high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006.* made from is 2062 grade mild steel materials (or better) duty lined with insulation bricks, refractory bricks, hysil boards.* burner mounting arrangement with refractory burner block.furnace door:furnace door charging & discharging side fabricated from 5mm to 6 mm thickness door opening & closing automatic.ash door:* ash door (with casted cement lining) to remove nonhazardous ash from the chamber.* top inlet bottom smoke discharge for longer gas residence time.* furnace door charging & discharging side fabricated from 5mm to 6 mm thickness.* door opening & closing automatic/manual.refractory:{complete set of refractory shaped bricks for construction electric cremation of i.s. 8 bricks (approx. 1007nos bricks,insulation 4000 nos. refractory slid for construction of flue duct , as required, refractory heat resistant fire clay , ceramic blanket hysil board, asbestos ropes etc. as required for outer side of the furnace shall be constructed by red bricks by sand and cement as mortars and construction of chimney from basement of roof level including painting i.e. bricks portion shall be painted by two coats of red oxide as primer and to coats of synthetic enamel. (a) complete lining & assembling of entire cremation chamber according to standard size with proper arrangement of accommodation of heating elements, resting of dead body with sufficient opening for falling of ashes to the ash chamber & sufficient ventilation for fresh air spraying. (b) complete lining and assembling of entire cremation chamber according to standard size with provision of drawing out aces from the rear side and sufficient ventilation for fresh air injection. complete lining and assembling of entire cremation chamber according to the standard size with provision of air inlet supplying by fresh air blower and arrangement of multi ventilation path for fresh air}. osspl make, thermocouple heat sensor supply & fixing the thermocouple of heat sensing range 0 - 1200 c (cr.-al) sensor housed in s.s 304 casing of dimension 1200 mm long 22 mm od complete encased to and fitted terminal on other and for connection of compensating of 2 cores 0.5 aq. mm cr- al for heat sensing from thermocouple to temperature controller covered with asbestos embedded rope about 50 m length as per direction of eic., f.d. fan/centrifugal air blower with electric motor * supply and delivery at site, installation, testing and commissioing.* of fresh air injection system forced draft fan mild steel.* type: centrifugal.* capacity:- 500 cmh.* pressure:- 220 mmwg.* motor rating:- 2hp (kirloskar/crompton), burner assembly * total 2 nos. of lpg/cng/png fired automatic burner required.* the burner should be provided with comprising diffuser plate/ burner plate, photo cell housing electrodes with holding brackets, solenoid valve, electrodes caps, flexible hose pipes, spary nozzles, oil filter, blower, etc. connected with electric motor (each burner) & in built air regulator.* burners will work on auto on/off as per the set temperature for the combustion chambers.* the in-built bolwer will provide continuous air flow to the burners to prevent demages due to high temperature., supply and fixing of manifold with a p

Central Government And Public Sector

CTN :42145163

16 Oct, 2025 NA

Sonitpur - Assam

Tender For supply of stainless steel wire rope of size 3.18 mm (circumference 10 mm), material specification - aisi-304 as per drg no. scn 8-3-5-806 alt d item no. 26.

State Government

CTN :41850343

08 Oct, 2025 4.27 Lacs

Anuppur - Madhya Pradesh

Tender For supply of consumables for aoh 2026 turbine and boiler of 210mw atps mppgcl chachai. - "molycoat 1000 hs (1 kg pack) bin no 71324607600-03" , "molysulf rust penetrant ""penetrol"" arosol can or equivalent makebin no 71324010179-01" , "stag b compound steam seal jointing paste type red (1 kg pack) bin no 71304690799-01" , "hylomer blue compound (100 gms tube) bin no 71304690800-01" , "taflon tape/ ptfe tread seal tape size 12m (l) x 12.5 mm (w) make champion or equivalent bin no 71324762704-01" , "m-seal or equivalent makebin no 71324493605-03" , "darien adex steel 101 (steel epoxy putty) or equivalent make anabond/ loctite / belzonabin no 22395490002-01" , "anabond rapid set epoxy or equivalent make anabond/ loctite / belzonabin no 71304691062-01" , "molykote p-37 (01 kg pack) or equivalent makebin no 71304690861-03" , mecatech express (100 gms pack) or equivalent make bin no 71324101463-01 , aanabond 666/ rtv silicon compound or equivalent make bin no 71324100275-03 , "araldite (twin pack of 180 gms resin & hardner) or equivalent make bin no 71324024913-01" , red dye penetrant (dp test kit) bin no 71324902359-01 , cleanner pc-21 (dp test kit) bin no. not available for 5013 , developer pd-31 (dp test kit) bin no. not available for 5013 , compound copper antisieze mosil gm50 or equivalent make bin no 71324101588-01 , loctite-406 or equivalent make bin no 71324570606-01 , rust removing solution/ rustoline or equivalent make bin no 71324714709-04 , anabond 112 (50 ml) or equivalent make bin no 71304691089-01 , o ring kit, material- nbr, size: 2 - 46mm, minimum 30 sizes and minimum total qty in box 400 nos. bin no 71324721177-01 , loctite 243 or equivalent make bin no 71324570962-01 , graphite powder(fine) bin no 71324623108-03 , zinc chromate primer bin no 71302110308-04

State Government

CTN :42132336

12 Oct, 2025 90.00 Lacs

Satara - Maharashtra

Tender For annual contract for loading & unloading, transportation of power transformers, psc/rsj poles of all sizes, steel materials, distribution transformers, sub-station equipments, line material by suitable vehicles under phaltan & vaduj division of satara circle.

Central Government And Public Sector

CTN :42122274

25 Oct, 2025 NA

Kudankulam - Tamil Nadu

Tender For supply of 6000 mm diameter - 125 mm , carbon steel round rod grade en8 as per dimensional standard is 1732 with material test certificate from nabl accredited lab with diameter - 150 mm supply length 1500-2500 mm , carbon steel round rod grade en8 as per dimensional standard is 1732 with material test certificate from nabl accredited lab with diameter - 200 mm supply length 800-1000 mm , carbon steel round rod grade en8 as per dimensional standard is 1732 with material test certificate from nabl accredited lab with diameter - 300 mm supply length 800-1000 mm , carbon steel round rod as per is2062 grade e250 br with material test certificate from nabl accredited lab with supply length 5000-6000 mm diameter - 12 mm , carbon steel round rod as per is2062 grade e250 br with material test certificate from nabl accredited lab with supply length 5000-6000 mm diameter - 16 mm , carbon steel round rod as per is2062 grade e250 br with material test certificate from nabl accredited lab with supply length 5000-6000 mm diameter - 25 mm , carbon steel round rod as per is2062 grade e250 br with material test certificate from nabl accredited lab with supply length 5000-6000 mm diameter - 32 mm , carbon steel round rod as per is2062 grade e250 br with material test certificate from nabl accredited lab with supply length 5000-6000 mm diameter - 40 mm , carbon steel round rod as per is2062 grade e250 br with material test certificate from nabl accredited lab with supply length 5000-6000 mm diameter - 50 mm , carbon steel round rod as per is2062 grade e250 br with material test certificate from nabl accredited lab with supply length 5000-6000 mm diameter - 65 mm , carbon steel round rod as per is2062 grade e250 br with material test certificate from nabl accredited lab with supply length 5000-6000 mm diameter - 80 mm , carbon steel round rod as per is2062 grade e250 br with material test certificate from nabl accredited lab with supply length 5000-6000 mm diameter - 90 mm , carbon steel round rod as per is2062 grade e250 br with material test certificate from nabl accredited lab with supply length 5000-6000 mm diameter - 100 mm , carbon steel round rod as per is2062 grade e250 br with material test certificate from nabl accredited lab with diameter - 125 mm supply length 1500-2500 mm , carbon steel round rod as per is2062 grade e250 br with material test certificate from nabl accredited lab with diameter - 200 mm supply length 800-1000 mm , carbon steel round rod as per is2062 grade e250 br with material test certificate from nabl accredited lab with diameter - 300 mm supply length 800-1000 mm , carbon steel round rod as per astm -a105 with material test certificate from nabl accredited lab with supply length 5000-6000 mm diameter - 25 mm , carbon steel round rod as per astm -a105 with material test certificate from nabl accredited lab with supply length 5000-6000 mm diameter - 50 mm , carbon steel round rod as per astm -a105 with material test certificate from nabl accredited lab with supply length 5000-6000 mm diameter - 75 mm , carbon steel round rod as per astm - a105 with material test certificate from nabl accredited lab with supply length 5000-6000 mm diameter - 100 mm , mild steel round rod as per is-432 grade 1 with material test certificate from nabl accredited lab with supply length length 5000-6000 mm diameter - 12 mm , mild steel round rod as per is-432 grade 1 with material test certificate from nabl accredited lab with supply length length 5000-6000 mm diameter - 16 mm , machinable and defect free grey cast iron round rod as per is 210 gr fg-220 with material test certificate from nabl accredited lab with supply length 450-550 mm diameter - 25 mm , machinable and defect free grey cast iron round rod as per is 210 gr fg-220 with //bid details 2 / 48 grey cast iron round rod as per is 210 gr fg-220 with material test certificate from nabl accredited lab with supply length 450-550 mm diameter - 50 mm , machinable and defect free grey

Steel Beam Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors