Latest steel belt Tenders | Government steel belt Tenders

Central Government/Public Sector

CTN :43534654

21 Jan, 2026 NA

Multi City - Multi State

Tender For supply of hex head stainless steel bolt m8x30mm length with suitable flat washer (01 no)& spring washer (01 no) standard: a2-70. make: tvs / unbrako / lps / deepakfast / tuff / precision fasteners limited/apl or similar. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43532439

27 Jan, 2026 NA

Multi City - Multi State

Tender For supply of stainless steel hexagonal head bolt fully threaded of size m 12 x 70 mm with one full nut andone half nut conforming to is: 1367 (part -14) 2002 along with two ss flat washers id 15 mm, od 24 mm and 2.4 mm thickness confirming to is 2016 -1967 / din 125, one ss spring washer of id 13 mm, od 20 mm, thickness 2.4 mm conforming to is: 3063 - 1994 / din 127 and one ss full nut and one ss half nut conforming is : 1364 (part 3) / 2002. all item shall conform to ss 304 , grade a2 - 70 make acceptable: tvs, unbrako, apl, lps. note : material should be supplied in assembled condition and shall be packed 100 nos in one carton box [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :43532514

27 Jan, 2026 NA

Multi City - Multi State

Tender For supply of stainless steel hexagonal head bolt with nut fully threaded of size m8 x 40 conforming to is 1367 (part 14) 2002, along with suitable two ss flat washers conforming to is : 2016 - 1967 / din 125, one ss spring washer conforming to is: 3063 - 1994 / din 127 and one ss nut conforming to is: 1364 / part 3 / 2002. all item shall conform to ss 304 , grade a2 - 70 make acceptable : tvs, lps, unbrako, apl note : material should be supplied in assembled condition and shall be packed 200 nos in one carton box [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :43532518

27 Jan, 2026 NA

Multi City - Multi State

Tender For supply of stainless steel hexagonal head bolt fully threaded of size m 10 x 50 mm with one full nut andone half nut conforming to is: 1367 (part -14) 2002 along with two ss flat washers id 13 mm, od 24 mm and 2.4 mm thickness confirming to is 2016 -1967 / din 125, one ss spring washer of id 11 mm, od 20 mm, thickness 2.4 mm conforming to is: 3063 - 1994/ din 127 and one ss full nut and one ss half nut conforming is : 1364 (part 3) / 2002. all item shall conform to ss 304 , grade a2 - 70 make acceptable: tvs, unbrako, apl, lps. note : material should be supplied in assembled condition and shall be packed 100 nos in onecarton box [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :43531924

03 Feb, 2026 NA

Ajmer - Rajasthan

Tender For supply of stainless steel full thread hexagonal head bolt size:-10x40mm, with 01 nos. nut, 02 nos. flat washer and 01 nos. spring washer, grade-304. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41672086

12 Jan, 2026 NA

Hyderabad - Telangana

Tender For bid to ras corrigendum : supply of maxillo faciall and auricular reconstruction set - dingmans gag adult , dingmans gag pediatric , fergusons 1 pair , stainless steel flat-adult , stainless steel flat-pediatric , mouth props set , dissecting scissors curved, sharp by sharp 13 cm -goldman-fox , goldman-fox blepharoplastic scissors saw edge 10.5 cm , mandibular channel retractor 17.5 cm , mandibular channel retractor 8 mm , mandibular channel retractor 10mm , forked ramus retractor , tessier maxilla mobilizer. left and right - 1 set , multi purpose periosteal elevator with beveled edge, sharp, 9mm , ramus stripper sharp, approx 7mm , rowe zygoma elevator blunt 25.5 cm , obwegeser nasal rasps channel type , williger raspatory , palatal raspatory right and left , castroviejo caliper, straight. measuring range up to 20 mm , osteotomes-curved 4mm, 6 mm, 10mm, 2 each , osteotomes- straight 4mm, 6mm, 10mm, 4each , osteotomes-bone gouge 5 mm , cottle osteotome , tessier nasal osteotome , nasal septum osteotome , lateral nasal wall osteotome, left and right , pterygomaxillary osteotome , bone mallet 340 g 19 cm 26 mm , rowe maxillary disimpaction forceps 23 cms left and right , connecting clamp for pair of maxillary disimpaction forceps , hyton william forceps forward and downward traction , obwegeser ramus clamps left and right , walsam nasal forceps , aschs nasal forceps , smiths ramus spreader , wire twister with tungsten carbide inserts 13.5 cm , wire cutter-heavy duty 2 , erichs arch , stainless steel imf wire spool , condyle retractors , sigmoid notch retractor , tmj spreader , eckelt tmj clamp left and right , skin hooks , double ended lucas curette 2 , volkmann double ended curette 2 , carbide flat fissure burs no 701 for surgical bone cutting , carbide flat fissure burs no 702 for surgical bone cutting , carbide flat fissure burs no 703 for surgical bone cutting , adson brown delicate tissue forceps, 12cm, 7x7 teeth, straight , select tissue forceps, 20cm, 1x2 teeth , gubisch t.c. needle holder, 12.5cm, extra fine - , baby crile wood t.c. needle holder, 15cm , gillies dura and skin retractor hook, 19cm, small , joseph delicate retractor, 17cm, 2 prong, 5mm, sharp , walter retractor, 19cm, 4 prongs, , langenbeck kocher retractor , iris supercut scissors, 12.5cm, curved , iris supercut scissors, 12.5cm, straight , supercut mayo scissors, 14cm, straight , supercut mayo scissors, 14cm, curved , scissors, 20cm, curved, supercut golden handle , earlobe repairing clamp //bid details 2 / 51

Central Government/Public Sector

CTN :43521430

30 Jan, 2026 NA

Multi City - Multi State

Tender For supply of bend nose plier taparia , biddle file set taparia j k tools , screw driver set taparia , armr tools bag and jcb nylon 18inch by stanley , milton plastic container 500 gm , tin sheet cutter taparia , pilot paint gun with jar 1 ltr , nosel paint gun , screw driver 3mm taparia , brass rod 5mm , squre file smooth 8 inch by j k tools , smooth file 10 inch flat by j k tools , smooth file 8 inch and 6 inch flat j k tools , round file smooth 8 inch and 6 inch flat by j k tools , chisel cold taparia , half round file smooth 8 inch and 6 inch bastard by j k tools , half round file smooth 8 inch and 6 inch smooth by j k tools , engine oil for compressor , straight pane hammer , house clip , magnifying glass 5 and 6x dia 6 cm , diamond glass cutter , bosco cordless screw driver , stainless steel container with lid 3 ltr cap , plastic bucket with lid 10 ltr cap , stainless steel scale 02 feet size

State Government

CTN :43467490

13 Jan, 2026 NA

Delhi - Delhi

Tender For s/i/t/c of e/m equipments and allied works for newly re-bored tube well at okhla vihar near majar in okhla constituency ac-54. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 15 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point: 200-125-75 lpm on 89-124-133 mtr. head.having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved. , supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted. a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no. b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 no c) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no. e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable banking g) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos.complete wiring &installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated and pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs. make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., supply of ms nut bolts off size as per requirement., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 1x1 made out from 6mm thick m.s. sheet in 2 halves and a circular hole in centre 3-1/2 dia. with locking arrangement by nuts and bolt. , earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

CTN :43504231

17 Jan, 2026 NA

Pune - Maharashtra

Tender For supply of lv6-mt14 2610-001597 tyre pneu 16.00 r 20 22pr 173g a/t , lv6-mt14 2610-000324 tyre pneu 165/80 r15 steel belted 86 s , lv6-mt14 110279 tyre pneu 3.25-19 4/6 pr block (studded , lv6-mt14 2610-000199 tyre pneu 13.6/12x28 6 pr cc , lv6-mt14 lv6/mt14 ace- 182082400200 tyre pneu 7.00-12 16 pr nhs tube type

corporations/Associations/Others

CTN :43019823

12 Jan, 2026 1.27 Lacs

Kakinada - Andhra Pradesh

Tender For bid to ras supply of dental consumables -round bur , tapered round , straight flat end , tapered conical end , inverted cone , endo z tungsten carbide bur , endodontic bur kit , gates-glidden drills , peeso reamers , composite and porcelain finishing bur kit , 702 carbide straight hand piece burs , 703 carbide straight hand piece burs , gic luting , gic restorative , temporary filling material , etchant , bonding agent , bonding agent applicator tips , tofflemire matrix retainer , stainless steel matrix bands , mylar strips , wooden wedges , suction tips disposable , barbed broaches , k files assorted , k file , h file assorted , spreaders assorted-15-40 , pluggers assorted 15-40 , hand protaper files , rc prep , rc cal , rotary endodontic files , sodium hypochlorite , endomethasone root canal , bio ceramic root canal sealer , paper points , gutta percha points protaper , metapex , wire twister , petroleum jelly , cotton roll dispenser , airotor lubricant oil , intraoral camera sleeves , topical anesthetic spray , chlorhexidine gluconate , glass slab, , instruments kit , endomotor , castroviejo scissors , suture cutting scissors , spirit lamp , cheek retractor , dental instrument tray ) /bid number: gem/2025/b/6933308 * /dated: 02-12-2025 & & / bid document1 / 48

Steel Belt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors