Latest steel cap Tenders | Government steel cap Tenders

CTN :41056115

22 Jul, 2025 NA

Doda - Jammu And Kashmir

Tender For supply of wiper blade for maruti gypsy , wiper arm for maruti gypsy , fuel injection pump for genr set 30 kva , fuel diesel pipe tank to filter for genr set 15 kva , fuel diesel pipe filter to pump for genr set 15 kva , push rod tube seal both side for genr set 15 kva , valve spring inlet and exhaust for genr set 15 kva , valve lock and lock plate for genr set 15 kva , coupling for genr set 15 kva , valve left and right for genr set 15 kva , valve seal for genr set 15 kva , holder fuel double pipe 17 into 19 for genr set 15 kva , push rod for genr set 15 kva , valve guide for genr set 15 kva , fuel injection pump for genr set 15 kva , cyl head valve set for genr set 15 kva , air filter element for genr set 3.5 kva , seal intake exhaust valve for genr set 3.5 kva , pre fuel filter for genr set 3.5 kva , holder assy 19 into 19 mm for genr set 3.5 kva , diesel pipe prv to tank for genr set 3.5 kva , fuel pump assy for genr set 3.5 kva , pistong ring set for genr set 30 kva , connecting rod cell for genr set 30 kva , air filter element for genr set 30 kva , oil filter element for genr set 30 kva , push rod tube seal for genr set 30 kva , steel cap push rod tube for genr set 30 kva , pvr no 17 fuel filter for genr set 30 kva , seal head valve for genr set 30 kva , head gasket for genr set 30 kva , tappet cover gasket for genr set 30 kva , inlet and outlet gasket for genr set 30 kva , piston assy crank for genr set 30 kva ) /bid number : gem/2025/b/6445332 * /dated: 12-07-2025 & & / bid document 1 / 27

CTN :40000929

21 Jul, 2025 35.44 Crore

Parganas - West Bengal

Tender For corrigendum : balance shore protection work by u type hot rolled steel sheet pile and other ancillary work in connection with construction of shore protection against massive erosion to save century old igwtp of m/s kolkata municipal corporation (kmc)

CTN :41048616

26 Jul, 2025 NA

Howrah - West Bengal

Tender For e-quotation for supply of cold rolled u type or z type ms sheet pile at different block of howrah district

Central Government And Public Sector

CTN :40013183

23 Jul, 2025 NA

Damanjodi - Odisha

Tender For corrigendum : supply of cylinder liner , steel cap piston

Central Government/Public Sector

CTN :41019399

23 Jul, 2025 NA

Vadodara - Gujarat

Tender For supply of axle end high tensile steel cap screw to rdso drg.no.wd-18016-s-01, alt.2, item no.1 f or e-type ctrb & other technical requirements conforming to str.no.ab/rb-40-2016, rev.2 of june-20 21 [ warranty period: 30 months after the date of delivery ]

State Government

CTN :41013133

22 Jul, 2025 NA

Parganas - West Bengal

Tender For supply cold formed steel sheet pile and driving at kolkata basanti road from 12.00kmp to 29.00kmp under south 24 parganas highway division, p.w.(roads) dte.

Central Government/Public Sector

CTN :40997740

29 Jul, 2025 NA

Multi City - Multi State

Tender For supply of axle end high tensile steel cap screw to rdso drg.no.wd-18016-s-01, alt.2, item no.1 for e- type ctrb, & other requirements conforming to str.no.ab/rb-39-2002, rev.4 of feb.2018 [ warranty per iod: 48 months after the date of delivery ]

CTN :40859793

28 Jul, 2025 NA

Hooghly - West Bengal

Tender For procurement of equipment, instrument, machineries, tools etc. related to laboratories and workshops of mechanical, electrical, civil, chemical engineering and science and humanities departments of hooghly inst of tech. - v notch channel test section: size: 250mm wide, 180mm deep; 600mmlong.materials : made with m.s lined with fiber or s.s 304baffle and deepened entry section for steadying water supply.arrangement for 7 fixing interchangeable notches.set of three brass notchesv notch (60 , 45 ).rectangular notch, electric oven size: 24 x 24 x 24- 03 shelvesspecification: vertical model , triple walled construction: front opening door, top mounted control panel for easy access, inner wall made of stainless steel with mirror polish, outer body made of mild steel with powder coat finish electrically operated thermostat with corresponding indicators. nichrome made long lasting heating elements, high grade glass wool insulation, g.i. made wire mesh shelves with adjustable runners., adsorption isotherm apparatusmagnetic stirrer in multi-position 6 and erlenmeyer flasks with lids (125 ml. - six nos.), distillation unit 1.distillation column : material stainless steel, dia 110mm, seven sieve trays.pressure gauge: bourdon type, 0-2 kg/cm2.rotameter: for cooling water flow rate measurement.steam generator: made of stainless steel, provided with pressure gauge & level indicator, safety valve & insulated with ceramic wool and cladding with aluminium foil.reflux divider: special arrangement to change r/d ratio automatically. condenser: shell & tube type made of stainless steel.bottom product tank: made of stainless steel, capacity 5 ltrs.distillate tank: made of stainless steel, capacity 5 ltrs.heater: nichrome wire heater.temp. sensors: rtd pt-100 typecontrol panel comprises of:digital temp. controller : 0-199.9 c, for steam reboilerdigital temp. indicator : 0-199.9 c, with multi-channel switchwith standard make on/off switch, mains indicator etc.2. flow measurement: rotameter for cold water for condenserdistillation still: material- stainless steel, capacity 5 ltrs (approx.) insulated with ceramic wool and cladding with aluminum foil.condenser: concentric tube type (material- stainless steel)distillate tank: material- stainless steel, capacity 2 ltrs.heater: nichrome wire heater.control panel comprises of :digital temp. controller: 0-199.9 c, rtd pt-100 type (for steam generator)digital temp. indicator: 0-199.9 c with multi-channel switch.temp. sensors: rtd pt-100 typewith standard make on/off switch, mains indicator, set up to determine the linear expansion co-efficient of a metal rod.material of metal bar: copper, length of metal bar(total):500mm, dia: 25mm, no of thermocouples mounted on the bar:6 , no of thermocouples in the insulated shell: 2, heater: band type, cooling jacket dia:75mm, no of thermocouples:10, ammeter: 0-5amp, voltmeter: -0-300v, dimmerstate:1000w, temp indicator: 0-300oc, experimental set up of bricks/walls in series for conductivity measurementdiameter of slab:0.3 m, thickness of bakelite, wood and ms plates: 0.012 m, temp of indicator: 0-300oc, ammeter - 0-5amp, voltmeter- 0-300v,heater: mica type, dimmer state: 1000w, vacuum filtration apparatus with buckner funnel apparatus.material porcelain, for use with (application)suction filtration, product type buchner funnel, glass reciver - 2000 ml, 5000ml , (customised), grade 41 filter paper pkt/ 100, concentric tube heat exchanger apparatusinner copper tube i.d, 12.7mm. and outer g. i. pipe i. d. 15mm. approx. and 1.5m. length.2. thermometers - 4 nos.3. measuring flask - 1 lit. capacity.4. geyser-3 kw. single phase.services required-1. 220v, 15a, stabilized single-phase ac supply.2. floor area - 3m x i m x 1 m height.concentric tube heat exchanger: (a)plain tube ( water to water ):the apparatus consists of two concentric tubes. inner tube consists of copper tube through which hot water flows. while the outer tube consists of gi pipe through which cold wat

Central Government/Public Sector

CTN :40962135

25 Jul, 2025 NA

Solan - Himachal Pradesh

Tender For custom bid for services - farm filed and operation job contract -1a. field/farm job work for the period 01.09.2025 to 31.08.2026 67160 man hours/12 months= 23 points- wetting of saw dust 6 qtls. mixing bag filling, autoclaving,, spawning, shifting bags to incubation room, composting yard,, spwan unit, incubation room, wetting wheat straw 8 qtls., mixing, filling in tunnel,, spawning of oyster and milky mushroom, shifting to, incubation room, composting yard,, spawning area, wetting wheat straw 3 ton, mixing ingredients, stack, formation, mixing ingredients on alternative day and filling, in tunnel, phase-ii composting, -dowetting of saw dust 6 qtls. mixing bag filling, autoclaving,, spawning, shifting bags to incubation room, composting yard,, spwan unit &, incubation room, wetting wheat straw 8 qtls., mixing, filling in tunnel,, spawning of oyster and milky mushroom, shifting to, incubation room, composting yard,, spawning area, wetting wheat straw 3 ton, mixing ingredients, stack, formation, mixing ingredients on alternative day and filling, in tunnel, phase-ii composting and continuation of, experiments of previous month, -dospawning of button mushroom compost, shifting bags to, incubation rooms, media preparation, cotton plugging., spawning area, and cropping, rooms, maintaining of cropping room condition, 13 rooms (12x16), like watering, cleaning, casing., -, harvesting, removal of used bags, preparation of casing,, casing of bags, cropping rooms, used bags emptying in pits, collection of used bags,, washing and treatment for empty rooms., -dowetting of cotton ginning mill waste (4 qtls.), mixing of, ingredients, stacking, turning, filling in tunnel, spawning,, plastic sheet covering, room cleaning, dusting of office and, labs etc., composting yard, wetting of wheat straw (4 qtls.) for milky and oyster, mushroom (3 qtls.) filling in tunnel, spawning, casing,, harvesting, watering, etc., composting yard, and cropping, room, daily watering in 13 cropping rooms, harvesting and, cleaning of cropping rooms, cropping rooms, removal of used bags, cleaning of rooms, disposing in, pits,, cropping rooms, and nearby area, substrate wetting (4 qtls.) of paddy straw mushroom,, mixing of ingredients, pile making, turning and filling in, tunnel, composting yard, wetting of wheat straw (4 tonnes) mixing ingredients,, shifting of tunnel, spawning, casing and watering,, harvesting, etc., cropping room, wetting saw dust, mixing wheat bran, filling in bags,, autoclaving, spawning, shifting to incubation rooms,, watering, cleaning, composting yard, watering in cropping rooms, cleaning, casing, filling,, packing, pesticide spraying, media preparation, millipore, water., cropping rooms, wetting of wheat straw (2 tonnes), stacking, turning, filling, in tunnel, spawning, bag filling, shifting to incubation room,, casing, watering, harvesting, etc. and continuation of, experiments of previous month, composting yard, and cropping, rooms, wetting wheat straw (4 qtls.) for oyster mushroom, mixing,, filling in tunnel, spawning, bag removal, watering,, harvesting, cleaning of rooms, etc., -dowetting saw dust (3 qtls.) mixing, autoclaving, spawning,, shifting to incubation room, etc., -docasing material preparation, tunneling, casing, watering,, digging pits, etc., -dowetting saw dust, mixing wheat bran, filling in bags,, autoclaving, spawning, shifting to incubation rooms,, watering, cleaning, -dowetting 6 qtls. of saw dust for shiitake and agrocybe,, mixing, filling in bags, autoclaving, spawning, shifting to, incubation rooms, etc., composting yard, wetting 6 qtls. wheat straw, mixing ingredients, turning,, inserting pvc pipes, covering with sheet, spawning,, shifting bags to incubation rooms,, -domaintaining cropping rooms, watering, cleaning, etc. cropping room, casing mixture preparation, sieving, filling in tunnel, casing, on spawn run bags, watering, -doharvesting, re-casing, watering, cleaning, etc. cropping rooms, wetting of wheat straw (4

Corporations And Associations And Others

CTN :40937103

11 Jul, 2025 9.46 Lacs

Ghazipur - Uttar Pradesh

Tender For :provision of water facility at slf bhalswa - boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in is: 2800 (part i), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer-in-charge, upto 90 metre depth below ground level. all type of soil (350 mm dia), boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in is: 2800 (part i), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer-in-charge, upto 90 metre depth below ground level. rocky strata including boulders-350mm, gravel packing in tubewell construction in accordance with is:4097, including providing gravel fine/medium/coarse, in required grading & sizes as per actual requirement, all complete as per direction of engineer-in-charge., development of tube well with suitable capacity of air compressor i/c lowering of the necessary induction pipe or line i/c cost of fuel, hire charges of compressor etc as reqd. the development shall be considered complete when gravel stop sinking, discharge ceased to improve and the sand contents are not more than 10 ppm after 20 minutes of starting the pump complete as reqd., providing, lowering and fixing/placing in vertical position ms black casing medium ( b-class) pipe of following size conforming to is 1239/3589 part-i (2004) at all depth, both ends threaded as required.(a) 200 mm dia. (nominal bore), providing, lowering and fixing/placing in vertical position ms slotted casing medium ( b-class) pipe of following size conforming to is 1239/3589 part-i (2004) at all depth, both ends threaded as required.(a) 200 mm dia. (nominal bore), providing, lowering and fixing/placing in vertical position ms slotted casing medium ( b-class) pipe of following size conforming to is 1239/3589 part-i (2004) at all depth, both ends threaded as required. (b) 150 mm dia (nominal bore), providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell. (a) 200 mm dia., supply, lowering and fixing following size of g.i. pipe (m-class) i/c cutting threading on both sides etc. isi marked etc as reqd. (d). 50mm(nominal bore), s & f following size of g.i. elbow. as reqd. (d). 50mm, s & f ms clamp made up of iron flat of size 50x6 mm with 4 nut bolt for holding the gi pipe as reqd. (b) 50 mm., providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) : 50 mm nominal bore, supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. (e) three phase 7.5 hp having discharge of 480 lpm approx. at 48 m head., s&f following size of g.i.socket as required. 50mm, s&f following size of g.i.union as required. 50mm, p&f following sizes of pvc insulated & pvc sheathed copper conductor 3 core submersible cable confirming to is.694/1990 etc. as reqd. (b) 3x 4 sq.mm., supply of cubical type control panel board for three phase star delta starter, three position selection with auto switch for submersible pumping set of following rating complete with single phasing preventer in auto, contactor (25amp), 0/l relay tp, mcb, voltmeter, ammeter, vss and indication lamp etc. including lamp etc. including connection etc. as required. (a) 10 h.p. rating submersible pump set over load relay (range13-21 amp) & contactor (range 25 amp)., supplying and fixing following sizes of steel flexible safety rope for holding s

Steel Cap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Corporations And Associations And Others