Latest steel chain Tenders | Government steel chain Tenders

Central Government/Public Sector

CTN :44568126

28 Mar, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - scrap condemned icf/rcf garibrath ac coaches lying at poh siding/amv/lko. sl. no., coach no., desc., railway, type, auth dt. (1) 084913 waccnh nr rcf 04.02.2026 (2) 061324 waccnh nr rcf 04.02.2026 (3) 081085 waccnh nr rcf 04.02.2026 (4) 091271 waccnh nr rcf 04.02.2026 (5) 084907 waccnh nr rcf 04.02.2026 (6) 091258 waccnh nr rcf 04.02.2026. total qty- 06 coaches = 12 units of coaches body. note- (1) complete trolley consisting of bogie, fittings under it and bronze pieces will not be delivered. (2) other excluded components as mentioned in dy. cme/w/amv/lko letter no. m/dcme/amv/misc./2024-25 dtd. 04.02.2026 (complete side buffer assembly, complete screw coupling/cbc assembly, complete assembled bogie, vesda items (control panel, power supply panel, speaker, flasher light, hooter), chain for middle berth, double acting door complete with frame, c3v distributer valve, control reservoir & auxiliary reservoir) and in attached depot e-auction sale conditions will be deposited by purchaser to custodian/ amv workshop lko before comencement of delivery of lot, if not already the part of complete trolley. (3) approximate weight offered for sale per waccnh coach- (i) ferrous = 21 mts approx, (ii) stainless steel = 1.30 mts approx (iii) copper = 0.80 mts approx (iv) aluminium = 0.07 mts approx (v) timber/wooden = 1 mts (vi) low/nil value items = 5.5 mts (4) cutting allowed. (5) loading by purchaser. (6) nil value items (glass wool, mica sheet, rubber, frp, fibre, curtains, rexine etc) released from coaches will be fully lifted by purchaser from the railway premisis before final delivery. (7) released trolleys will be shifted from cutting line to designated place in poh yard/amv by purchaser before final delivery. (8) delivery not allowed against part payment . custodian- sse/poh siding/amv/lko. location- lying at poh siding/amv/lko. ref.-cwm/amv/lko l. no. m/dcme/amv/misc/2024-25 dtd. 04.02.2026, 10.02.2026, 11.03.2026, sse/poh/amv letter no. nil dtd. 17.02.2026

Central Government/Public Sector

CTN :44568128

28 Mar, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - scrap condemned icf/rcf garibrath ac coaches lying at poh siding/amv/lko. sl. no., coach no., desc., railway, type, auth dt. (1) 081385 waccnh nr rcf 04.02.2026 (2) 084902 waccnh nr rcf 04.02.2026 (3) 081423 waccnh nr rcf 04.02.2026 (4) 074947 waccnh nr rcf 04.02.2026 (5) 094960 waccnh nr rcf 04.02.2026 (6) 074939 waccnh nr rcf 04.02.2026. total qty- 06 coaches = 12 units of coaches body. note- (1) complete trolley consisting of bogie, fittings under it and bronze pieces will not be delivered. (2) other excluded components as mentioned in dy. cme/w/amv/lko letter no. m/dcme/amv/misc./2024-25 dtd. 04.02.2026 (complete side buffer assembly, complete screw coupling/cbc assembly, complete assembled bogie, vesda items (control panel, power supply panel, speaker, flasher light, hooter), chain for middle berth, double acting door complete with frame, c3v distributer valve, control reservoir & auxiliary reservoir) and in attached depot e-auction sale conditions will be deposited by purchaser to custodian/ amv workshop lko before comencement of delivery of lot, if not already the part of complete trolley. (3) approximate weight offered for sale per waccnh coach - (i) ferrous = 21 mts approx, (ii) stainless steel = 1.30 mts approx (iii) copper = 0.80 mts approx (iv) aluminium = 0.07 mts approx (v) timber/wooden = 1 mts (vi) low/nil value items = 5.5 mts (4) cutting allowed. (5) loading by purchaser. (6) nil value items (glass wool, mica sheet, rubber, frp, fibre, curtains, rexine etc) released from coaches will be fully lifted by purchaser from the railway premisis before final delivery. (7) released trolleys will be shifted from cutting line to designated place in poh yard/amv by purchaser before final delivery. (8) delivery against part payment not allowed. custodian- sse/poh siding/amv/lko. location- lying at poh siding/amv/lko. ref.-cwm/amv/lko l. no. m/dcme/amv/misc/2024-25 dtd. 04.02.2026, 10.02.2026, 11.03.2026, sse/poh/amv letter no. nil dtd. 17.02.2026 , 25.02.2026.

Central Government/Public Sector

CTN :44568749

30 Mar, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - 98050114 scrap release all types of railway ferrous material consisting of s&t, p way, works and ohe items c & w items-suchas ms, gi, ci containing signalling units, rods, junction boxes, panels, ms gi structures, ladders, mast, rtu, cb, etc. andallother types of signaling items, gear case, the ground connection, ohe fitting, ms chains, heavy structure almirah/racks,rodsangle, top housing, road bar, glude joint, ground connection channel, pipes, lc material, ladders, jali, spring plank,pantographwith or without pneumatic motor, gate, door, brake cylinder, tie bar, fencing, trolley, ms machines etc., tmt barsrods, pulley,rib cage, point machines without motors, wagon body cut piece bogies side frame, machines, sleeper, ms sheet,various typessleeper part, tie bar, fencing bars, i-beam, damaged empty drums, light fittings, rail & rail pieces, ms wires, junklightweight/corroded material consist of toughened sheets, m.s./gi sheets, grease seal, drum, wire, parts of rolling shutter,lightweight cuttings, various damaged and rusty drums filled with coalter, dry paint, mud and dray fo if any of sort andsizes,g.i. buckets, steel buckets baskets, signal lamps, duct, vent pcs., fencing and pipes, wire mesh, stretcher, bicycle,pan,frames, electrical fittings, t.l. fittings, grill- jali, cabinet frames, rack ballast, rusted body and parts of weighingmachine,electronic/electrical material, small rods angle, battery boxes, tool boxes, shovel, rail door handles, main door, footplate,step plates, bench pipes, typewriter g.i. pipes, trolleys, water tank bond, location box with or without their componentandwiring fittings, trolly, different type of ohe bonds of rail and other various ms fabricated structures, break load rings,pins,screw, bolts, spikes, keys, loco parts, stay rods, sleeve for centre pivot, pantograph parts, palm pull rods, lever, axleboxhousings, air motor, springs of pantograph, connecting rods, and other rods, rear cover of axle box housing, etc. longerhanger,spare parts of spt machine, pipe fittings, end shield covers, break beam hangers, brake shoe, vertical lever, suspensionlevers,compressor spares, tension rods bushes, dash pots, collars, vehicle spares, ci items consisting ofrusty and dustydrainage pipe, valve, meter, brake block, pulley, motors body, pipes, plates, d.v, vacuum cylinder chamber, pigirons pieces,signaling box ohe fittings, steel furniture consisting of chairs, tables, g.i. separation sheet, chair , stretcher, beds,ms rack,almira, other types of steel furniture of sorts and sizes, broken, damaged with or without wood, cushions, plastic,mica, foamseat attachment, parts brake liner, thrust bearing, spring, yoke, insulation block hangers, slides, locking rods, partsof pointmachine, a b cover, break head, cylinder head, pcs. of break beam, protective tubes, and other p-way fittings, coupler,knuckles,cp top/bottom, pu pad, narrow/wide jaw adapter, released bulk head components, wagon doors, cutting plate, andassorted cutpieces thereof, fabricated from irsm 44, etc. brake cylinder, cs & ci if any. valve, broken pcs. of bearings, inner and outer raceof bearings, spares of break valve, trolley wheels, clamps, bmbc parts, pump shafts, impellers, tension device parts, fanarmatures, chain sling, rev. centre, hooks, spares of trucks, accessories of transformer, fish plates, hooks, silentblocks, cutpieces of plates, doors, angles, etc., fasteners such as bolts, nuts, and other related misc, etc., with or without, rail,of sorts andsizes with or without parts, fittings, and minor non-ferrous attachments, unserviceable. if any non-ferrous material is found willnot be delivered and retained by the custodian. minor/negligible nf attachment may be allowed. excluding items -rubber/wooden /plastic/ material and shed.

Central Government/Public Sector

CTN :44568751

30 Mar, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - 98050114 scrap release all types of railway ferrous material consisting of s&t, p way, works and ohe items c & w items- suchas ms, gi, ci containing signalling units, rods, junction boxes, panels, ms gi structures, ladders, mast, rtu, cb, etc. and allother types of signaling items, gear case, the ground connection, ohe fitting, ms chains, heavy structure almirah/racks, rodsangle, top housing, road bar, glude joint, ground connection channel, pipes, lc material, ladders, jali, spring plank, pantographwith or without pneumatic motor, gate, door, brake cylinder, tie bar, fencing, trolley, ms machines etc., tmt bars rods, pulley,rib cage, point machines without motors, wagon body cut piece bogies side frame, machines, sleeper, ms sheet, various typessleeper part, tie bar, fencing bars, i-beam, damaged empty drums, light fittings, rail & rail pieces, ms wires, junk lightweight/corroded material consist of toughened sheets, m.s./gi sheets, grease seal, drum, wire, parts of rolling shutter, lightweight cuttings, various damaged and rusty drums filled with coalter, dry paint, mud and dray fo if any of sort and sizes,g.i. buckets, steel buckets baskets, signal lamps, duct, vent pcs., fencing and pipes, wire mesh, stretcher, bicycle, pan,frames, electrical fittings, t.l. fittings, grill- jali, cabinet frames, rack ballast, rusted body and parts of weighing machine,electronic/electrical material, small rods angle, battery boxes, tool boxes, shovel, rail door handles, main door, foot plate,step plates, bench pipes, typewriter g.i. pipes, trolleys, water tank bond, location box with or without their component andwiring fittings, trolly, different type of ohe bonds of rail and other various ms fabricated structures, break load rings, pins,screw, bolts, spikes, keys, loco parts, stay rods, sleeve for centre pivot, pantograph parts, palm pull rods, lever, axle boxhousings, air motor, springs of pantograph, connecting rods, and other rods, rear cover of axle box housing, etc. longer hanger,spare parts of spt machine, pipe fittings, end shield covers, break beam hangers, brake shoe, vertical lever, suspension levers,compressor spares, tension rods bushes, dash pots, collars, vehicle spares, ci items consisting ofrusty and dusty drainage pipe, valve, meter, brake block, pulley, motors body, pipes, plates, d.v, vacuum cylinder chamber, pigirons pieces, signaling box ohe fittings, steel furniture consisting of chairs, tables, g.i. separation sheet, chair , stretcher, beds,ms rack, almira, other types of steel furniture of sorts and sizes, broken, damaged with or without wood, cushions, plastic,mica, foam seat attachment, parts brake liner, thrust bearing, spring, yoke, insulation block hangers, slides, locking rods, partsof point machine, a b cover, break head, cylinder head, pcs. of break beam, protective tubes, and other p-way fittings, coupler,knuckles, cp top/bottom, pu pad, narrow/wide jaw adapter, released bulk head components, wagon doors, cutting plate, andassorted cut pieces thereof, fabricated from irsm 44, etc. brake cylinder, cs & ci if any. valve, broken pcs. of bearings, inner and outer race of bearings, spares of break valve, trolley wheels, clamps, bmbc parts, pump shafts, impellers, tension device parts, fan armatures, chain sling, rev. centre, hooks, spares of trucks, accessories of transformer, fish plates, hooks, silentblocks, cut pieces of plates, doors, angles, etc., fasteners such as bolts, nuts, and other related misc, etc., with or without, rail,of sorts and sizes with or without parts, fittings, and minor non-ferrous attachments, unserviceable. if any non-ferrous material is found will not be delivered and retained by the custodian. minor/negligible nf attachment may be allowed. excluding items -rubber/wooden /plastic/ material and shed.

CTN :44561178

03 Apr, 2026 NA

Darjeeling - West Bengal

Tender For supply of supply of pre cast rcc box culverts of internal size 1000mm x 2000mm x 1600mm , app bitumen membrane sheet of grade 2504 thickness 3.0mm , cement ppc opc 53 grade in polythene of 50 kg each , sand coarse , graded stone aggregate coarse 20mm , stone aggregate coarse 40mm , quick setting compound , angle iron fencing post fabricated with isa 65x65x6mm of 3.75m long , angle iron corner post struts fabricated with isa 65x65x6mm of 2.43m , flat iron 40x3mm, 2.20m long with five holes for 12mm dia bolt , ms black bolts 12mm dia 50mm long , flat iron 25x3mm, 3.0m long with seven holes for 8mm dia , ms black bolts 8mm dia 50mm long with one hexagonal nut and two 3mm washer , galvanized steel chain link fence manufactured with 3.80mm dia , galvanised steel brt wire , 600 mm dia steel wire entanglements wth galvanised steel concertina coil reinforced with punched , paint synthetic enamel , painting brush 2 inch superior quality , red oxide primer , ms steel wicket gate 1.20m wide single leaf 2.10m height , supply solar lantern model no ms122 solar lantern , 7 kw powered self start portable generator of heavy duty petrol engine , hdpe hose pipe 25mm dia , 1hp petrol water pump of capacity 35cc 4 stroke pertol engine , pcc solid block 400x200x200mm , pre cast rcc bench , 60mm thk heavy duty rubberised mat finish paver block tiles m-40 grade , transparent pipe 5mm dia bore , plaster trowel with wooden handle , fish line , plumb bob iron , galvanised iron pan mortar 18 gauge 16 inch dia , rammer earth with handle , picks axes with chiesel and point ends , showel square nose 14 gauge tata high carbon steel , multipurpose non-slip rubber reusable gloves , brick trowel steel 305 mm , gum boot , plaster rod rod 1.2 m long , water bucket steel 13inch dia , crow bar 5.1 kgs , measuring tape 5 mtr , measuring tape 15 mtr ) /bid number : gem/2026/b/7378640 * /dated: 20-03-2026 & & / bid document 1 / 31

CTN :44561341

17 Apr, 2026 NA

Pune - Maharashtra

Tender For supply of mt spares c c - , lv7 av 15 578 003 007 352 64 pin , lv7 av 15 578 003 910 952 85 clip , lv7 av 15 578 003 005 452 64 chain , lv7 av 15 578 003 107 652 85 flap , lv7 av 15 dp av 023 drift punch 75 for driving out , lv7 av 15 dp av 027 drift punch 100 for driving out , lv7 av 15 309 543 181 026 screw m10x45 , lv7 av 15 578 003 101 552 63 gasket dg 500219 , lv7 av 15 675 431 308 135 rope 20 mtr , lv7 av 15 dp av 003 drift punch 08 driving out bolts , lv7 av 15 2224 0 333 ring let 40615 35 , lv7 av 15 443 851 110 001 plug switch , lv7 av 15 dp av 022 screw for pulling out inserting the , lv7 av 15 578 003 117 052 34 pin , lv7 av 15 2226 0 357 packing ring 13x17 , lv7 bz t 815 csn 02 9310 2 t 815 sealing ring let 8x14 , lv7 pinaka lcr w 119029 outrigger extension cylinder assy , lv7 pinaka lcr v7722000033 axial piston pump , lv7 t 815 107 214 114 160 spring washer , lv7 t 815 150 141 006 004 lock washer , lv7 t 815 442 070 211 624 discharge tube , lv7 t 815 442 035 260 544 side cover sheet lh , lv7 t 815 323 041 488 449 connecting rod bushing 6039 05 4v , lv7 t 815 990 100 743 000 distance washer s 1 72 00484 37 , lv7 t 815 442 072 850 354 run in gearing rh , lv7 t 815 443 852 042 000 oil pressure switch , lv7 t 815 130 054 390 604 protective bag , lv7 t 815 150 130 029 004 air cleaner spp 1200r repair kit , lv7 t 815 2530 72 0255579 tie rod streering 130 021 210 324 , lv7 t 815 207 112 033 4 handle with thread , lv7 t 815 129 928 300 034 handle cover , lv7 t 815 8x8 130 051 361 324 plug , lv7 t 815 448 104 461 226 clip , lv7 t 815 8x8 443 934 901 109 washer 5 3x13x1 mgn 19 05 04 01 109 , lv7 t 815 442 053 621 404 reduction coupling , lv7 t 815 452 330 352 808 clamping strip 5x175 csn 02 2757 , lv7 t 815 443 934 901 221 washer insulation , lv7 t 815 441 010 680 554 fan blade wheel , lv7 t 815 8x8 442 050 512 324 spring , lv7 t 815 442 076 632 144 oil supply tube , lv7 t 815 443 975 485 523 carrying pin 54855 23 , lv7 t 815 273 112 451 134 gasket , lv7 t 815 8x8 5310 72 0220163 washer convex 130 051 110 244 , lv7 t 815 4x4 107 112 175 000 clevis pin 10f8x28x24 is 6863 73 , lv7 t 815 4x4 107 112 104 000 clevis pin b8 c11x56x53 is 6863 73 , lv7 t 815 4x4 107 338 125 016 split pin 2 5x16 is 549 74 , lv7 t 815 4x4 107 520 612 080 clevis pin b12x80 is 6862 2005 steel , lv7 t 815 4x4 106 112 361 000 csk screw m5x22 is 8911 78 5 8 , lv7 t 815 4x4 107 110 205 000 hex thin nut m8 is 1364 part iv 2003 04 , lv7 t 815 4x4 107 214 113 100 spring washer 10 , lv7 t 815 4x4 311 901 072 000 sealing ring , lv7 t 815 4x4 548 212 003 000 insert 8x13 203 66 00024 , lv7 t 815 4x4 106 111 688 000 slotted cheese head screw m6x10 , lv7 t 815 4x4 273 111 032 000 rubber plug 30 35 cm 3238 , lv7 t 815 4x4 101 442 001 000 rubber border , lv7 t 815 4x4 106 113 294 000 tapping screw st 4 8x19f is 7173 89 , lv7 t 815 4x4 106 112 120 000 csk screw m3x6 is 1365 78 5 8 , lv7 t 815 4x4 442 954 180 034 border , lv7 t 815 hmv 311 693 000 000 rivet 8x18 csn 02 2331 7 , lv7 t 815 hmv 990 300 775 000 shaft sealing g 150x180x15 si 40235 , lv7 t 815 hmv 443 654 162 000 hose of 412 dn20x500 dkl dkl , lv7 t 815 hmv 201 383 005 4 clutch plate of fan drive , lv7 t 815 hmv 441 951 110 024 washer , lv7 t 815 hmv 319 411 039 0 neck , lv7 t 815 hmv 321 841 214 000 pipe line clip , lv7 t 815 hmv 130 054 470 134 sleeve , lv7 t 815 hmv 627 839 225 025 gasket 0 25mm , lv7 t 815 hmv //bid details 2 / 117 311 901 318 000 sealing ring 18x24 csn 02 9310 2 , lv7 t 815 hmv 442 600 779 000 nut , lv7 t 815 hmv 106 114 922 000 socket hd cap screw m5x30 is 2269 2002 , lv7 t 815 hmv 106 111 658 000 slotted cheese hd screw m4x16 is 1366 2 , lv7 t 815 hmv 106 201 140 416 hex hd bolt m12x45 is 1364 part 1 , lv7 t 815 hmv 107 338 163 018 split pin 3 2x1 8 is 549 74 , lv7 t 815 hmv 107 214 113 000 spring washer b 10 is 3063 , lv7 t 815 hmv 107 212 115 043 washer a4 3 is 5370 69 steel , lv7 t 815 hmv 107 110 995 000 circlip 4 is 3075 part 3 86 , lv7 t 815 hmv 106 251 140 612 csk screw m6x14 i

CTN :44538617

27 Mar, 2026 NA

Jaisalmer - Rajasthan

Tender For supply of welding machine 400 amp phase modular igbt amc or mma or tig , gauge shaper machine for wood with wedge system 13 inches , die system for molding of steel pipe rectangular shape , die system for molding of steel pipe round shape , heavy duty vertical bench drill 40mm machine for steel and wooden structure with 1 point 5 hp motor with gear , band saw ara machine cutter dia 15 to18 inches with 2 hp motor , bench grinder for wood surface finish 125 to 50 mm dia , carpenter try square set 3ft or 4ft or 5ft , wood chisel set , screw driver set , hand saw 450 mm heavy duty ss , wooden mallet upto 1 kgs , auger bit set for wood , bending machine for wood work , combination plier 200 mm heavy duty , iron jack clamp for carpenter , flat file medium cut , triangular file medium cut , plane steel body for hand carpenter , cutter blade steel size 10 no , cutter blade steel size 8 no , cutter blade steel size 4 no , cutter blade steel size 5 no , drill bit set hss , stell wire brush set , hinges 0 degree hettich , conealed hinges , soft close hinges , pivot centre hinges , flush hinges , soft close channel telescopic 14 inch colour matte black , soft close channel telescopic 14 inch colour soft silver , hammer drill machine with bits of bosch gsb 2 to 26 , angle grinder machine 670 watt , hand grinder cutting wheels 4 inch dia , hammer drill bit set 6 oblique 16mm , hammer drill bit set of 15mm od having length 18 inch compataible with bosch gdb 179 , hammer drill bit set bit of 25mm od having length 18 inch compataible with bosch gdb 180 , portable welding machine , welding electrodes of 4 x 450mm , cilampmeter , screw driver , line tester , cutting plier , long nose plier , wire stripper , ball pain hammer with handle 300 gm confirming , club hammer with handle 800 gm confirming , allen folding type key set blister packing confirming to is 3082 1988 , open end spanner 6 to 22mm , open end spanner 12 or 13 mm , hex type t spanner with handle of size 8mm , hex type t spanner with handle of size 10mm , hex type t spanner with handle of size 13mm , adjustable spanner 12 inch , file 10 inch long , chisel 6 inch , measuring tap 5 mtr long , teflon tape , digital vernier caliper , pressure washer pump , flaring tool , swaging punch for 1 oblique 4 inch to 5 oblique 8 inch size , refrigerent charging tube , pressure guage 250 psi , copper pipe spring 5 oblique 8 inch dia , copper pipe spring 1 oblique 4 inch dia , burner heating torch , can valve , sealing piler , cupler , copper pipe tube cutter 1 oblique 8 od , chain block with chain of 1 ton , tool bag , core cutting machine with having drill stand with water cooling arrangement , diamond core cutting bit of 75mm od having length 20 inch compataible with core cutting machine , diamond core cutting bit of 62mm od having length 20 inch compataible with core cutting machine , aluminium foldable ladder 20 feet , aluminium foldable ladder 10 feet , aluminium foldable step ladder 6 feet , indoor ac service cover , hand blower med size , nylon marine rope 25mm dia , socket set 6 to 32mm with driver complete set , vaccum pump double stage , water level scale , copper pipe tube bender cutter 1 oblique 2 od , copper pipe tube bender cutter 1 oblique 4 od , tube cleaning machine for heat exchanger and condenser cleaning electric having trolly handle with foot padel switch , flexible shaft of length 4 mtr for tube cleaning tube size for 25 point 40mm , de scaling rod 2 feet , de scaling rod 3 feet , de scaling rod 5 feet , de scaling brush 6mm dia , de scaling brush 8mm dia , de scaling brush 10mm dia //bid details 2 / 57 scaling brush 8mm dia , de scaling brush 10mm dia

CTN :44550446

30 Mar, 2026 NA

Patiala - Punjab

Tender For supply of copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , bathroom water shower (v2) (q3) , soap dish - case (q4) , waste fittings for washbasin and sinks as per is 2963 (q3) , bathroom or toilet mirror (v3) (q4) , plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763 (q3) , putty , convex mirrox 60cm , convex mirror 80cm , viterous china wash basin , syphon kit assembly , solar warning light with stand post , gun metal gate valve 25mm , wooden beading , stainless steel kitchen sink single bowl with drain board , stainless steel kitchen sink without drain board , french polish , cushioned for chair dining officers with cloth cover duly stitched 18x18x75mm thickness of 40 density , foam cushion sofa set size 530x560x100mm thick 40 density , chair dining cushion cover duly stitiched one side chain , sofa cushion cover duly stitched one side chain , plastic ewc seat cover , hydraulic door closer , plywood commerical bwr 7x3x12mm , turpentine oil , synthetic enamel paint black , synthetic enamel paint white , varnish , pvc tank nipple 15mm , pvc tank nipple 20mm , plywood commerical bwr 6x3x12mm , plywood commerical bwr 8x4x12mm , plywood one side teak face 8x4x6mm , brass spindle , pvc low level flushing cistern 10 litre , quartz sink for kitchen single bowl , flood light 100w , flood light 400w , prelaminted particle board 8x4x18mm , pvc waste pipe 32mm with adopter , pvc waste pipe 40mm , floor drain traps (v2) (q3) ) /bid number : gem/2026/b/7337236 * /dated: 19-03-2026 & & / bid document 1 / 48

CTN :43562992

21 Mar, 2026 NA

Netanar - Chhattisgarh

Tender For bid to ras providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - hiring of 5 nos of chain mounted excavators for loading unloading & stacking of pig iron for a period of 1 year for 3 mtpa integrated steel plant at nagarnar near jagdal..

CTN :44186509

21 Mar, 2026 NA

East Sikkim - Sikkim

Tender For bid to ras supply of non skid chain 235-75r15 , non skid chain 16 point x 28 , non skid chain 12 point 5 x 80-18 , non skid chain 1400 x 25 , non skid chain 365-85r-20 , non skid chain 365-65r22 point 5 , non skid chain 215-75r15 , non skid chain 1100 x 20 , double hook chain 3 x 2inch 2mm dia 20 feet long , alloy steel chain 2 x 1 point 5inch 10mm dia 02 ton cap 20 feet long , alloy steel chain 2 point 5 x 2inch 10mm dia 04 ton cap 20 feet long , alloy steel chain 20mm dia 12 ton cap 20 feet long , alloy steel chain 22mm dia 15 ton cap 20 feet long , d clamp alloy steel pin dia 22mm inner width 32 point 5mm and length 65mm , d clamp alloy steel pin dia 22mm inner width 32 point 5mm length 85mm , d clamp alloy steel pin dia 40mm inner width 62mm inner length 120mm , ratchet lashing belt size 16 ft x 5 ton b-s 10 ton , ratchet lashing belt size 18 ft x 10 ton b-s - 20 ton , ratchet lashing belt size 22 ft x 10 ton b-s - 20 ton , ratchet lashing belt size 24 ft x 10 ton b-s - 20 ton , ratchet lashing belt size 26 ft x 10 ton b-s - 20 ton ) /bid number: gem/2026/b/7280836 * /dated: 24-02-2026 & & / bid document1 / 24

Steel Chain Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector