Latest steel conduit pipe Tenders | Government steel conduit pipe Tenders

Central Government/Public Sector

CTN :43531728

02 Mar, 2026 NA

Multi City - Multi State

Tender For supply of gasket for flange welded joint (pipe to equipment) for 25 mm n.b. pipe drawing no.:-wd-83062-s-07 , alt (6) item - 1 specification:- 04-abr-2019 (rev.-2 ) [ warranty period: 30 monthsafter the date of delivery ]

Central Government/Public Sector

CTN :43531986

22 Jan, 2026 NA

Multi City - Multi State

Tender For supply of flange male connector (pipe to eqpt) 20mm n.b (70 mm pitch) to drg no icf/std-3-5- 020, item-1, alt c, as per icf specification no. icf/md/spec-166 rev 4 (latest/revision). ]

Central Government / Public Sector

CTN :43532542

09 Feb, 2026 NA

Multi City - Multi State

Tender For supply of stainless steel flange a20 for 20 nb pipe conforming to rdso spec.no. 04-abr-2019, rev.02, december,2019 to rcf drg no : rcf drg. no. cc-36674 alt : nil. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :43532548

09 Feb, 2026 NA

Multi City - Multi State

Tender For supply of stainless steel moving flange for 25 nb pipe conforming to rdso spec.no. 04-abr-2019, rev.02, december,2019 to rcf drg no : cc-36670 alt : nil. [ warranty period: 30 months after the date of delivery ]

CTN :43400565

13 Jan, 2026 NA

Jalandhar - Punjab

Tender For corrigendum : supply of pipe tc to ic , rear wind shield rh , repair kit , major seal kit steering gear box , plug oxygen sensor , master cyl power unit clutch master cyl , gasket and seal set , assy cable complete , coil ignition , tci unit , carburetor flange washer

CTN :43264781

17 Jan, 2026 NA

Pune - Maharashtra

Tender For corrigendum : supply of lv1 r72 172 35 065 bolt , lv1 r72 54 20 087 2a grip lever , lv1 r72 188 31 261 gasket , lv1 r72 175 40 051 bushing , lv1 r72 54 12 093 1 plug , lv1 r72 175 93 040sb latch , lv1 r72 5340610099731 wedge 432-21017sb , lv1 r72 172 66 250 pipe union , lv1 r72 432 85 064 gasket , lv1 r72 432 44 027 cone , lv1 r72 5330720115354 seal oil 432-63-149 , lv1 r72 172 45 116 gasket flange , lv1 r72 175 33 328 gasket , lv1 r72 em30 025 dust cover , lv1 r72 172 93 387 01 cover plate , lv1 r72 613 28 50sb a wrench torque control , lv1 r72 172 11 075 1 wedge , lv1 r72 34 07 056 lock , lv1 r72 5306720059018 bolt 172-11-131 , lv1 r72 175 91 102 nut

State Government

CTN :43525740

16 Jan, 2026 1.68 Lacs

Ambala - Haryana

Tender For amtc of ephs in sector 1 ue ambala city repair of ohsr flange pipe in ohsr at water works in sector 1 amabala city complete in all respect and all other works contingent thereto

State Government

CTN :43467490

13 Jan, 2026 NA

Delhi - Delhi

Tender For s/i/t/c of e/m equipments and allied works for newly re-bored tube well at okhla vihar near majar in okhla constituency ac-54. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 15 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point: 200-125-75 lpm on 89-124-133 mtr. head.having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved. , supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted. a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no. b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 no c) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no. e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable banking g) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos.complete wiring &installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated and pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs. make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., supply of ms nut bolts off size as per requirement., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 1x1 made out from 6mm thick m.s. sheet in 2 halves and a circular hole in centre 3-1/2 dia. with locking arrangement by nuts and bolt. , earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

CTN :43334968

14 Jan, 2026 NA

Trivandrum - Kerala

Tender For corrigendum : supply and installation of plumbing items for the construction of isolation wards in kerala -zone 2. - plumbing items, providing and fixing white vitreous china coupled type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: w.c. pan with isi marked white solid plastic seat and lid, providing and fixing pedestal type wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: white vitreous china pedestal type wash basin with a 15 mm c.p. brass pillar tap, providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete., supplying and fixing stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supplying and fixing cp towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supplying and fixing cp health faucet superior quality ( jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supply,fixing, testing and commissioning angle valves make: kohler or equivalent, supply,fixing, testing and commissioning at site c.p. brass bib cocks long noze with wall flange make: kohler or equivalent, providing, fixing, testing and commissioning at site in position floor trap, with stainless steel grating, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 15 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 20 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 25 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-i

CTN :43334983

14 Jan, 2026 NA

Trivandrum - Kerala

Tender For corrigendum : supply and installation of plumbing items for the construction of isolation wards in kerala -zone 1 - plumbing items, providing and fixing white vitreous china coupled type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: w.c. pan with isi marked white solid plastic seat and lid, providing and fixing pedestal type wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: white vitreous china pedestal type wash basin with a 15 mm c.p. brass pillar tap, providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete., supplying and fixing stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supplying and fixing cp towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supplying and fixing cp health faucet superior quality ( jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supply,fixing, testing and commissioning angle valves make: kohler or equivalent, supply,fixing, testing and commissioning at site c.p. brass bib cocks long noze with wall flange make: kohler or equivalent, providing, fixing, testing and commissioning at site in position floor trap, with stainless steel grating, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 15 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 20 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 25 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in

Steel Conduit Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector

State Government

State Government