Latest steel cross arm Tenders | Government steel cross arm Tenders

corporations/Associations/Others

CTN :40512346

09 Jun, 2025 3.11 Lacs

Erode - Tamil Nadu

Tender For supply of 1500nos. lt single phase channel cross arm

corporations/Associations/Others

CTN :40494712

11 Jun, 2025 7.90 Lacs

Cuddalore - Tamil Nadu

Tender For supply of tapping channel cross arm for operation and maintenance works in cuddalore edc

corporations/Associations/Others

CTN :40483327

09 Jun, 2025 14.00 Lacs

Coimbatore - Tamil Nadu

Tender For supply of lt three phase channel cross arm -2500 nos

State Government

CTN :40474645

29 May, 2025 NA

Thiruvananthapuram - Kerala

Tender For target for the year 2025-26-1st phase- fabrication of 2line & 4 line cross arm, 1.8m,2.4 m and 3m channel cross arm in production shop, c. m. division, pallom.

CTN :40319578

02 Jun, 2025 18.23 Lacs

Budaun - Uttar Pradesh

Tender For corrigendum : for running contract for hon,ble sansad nidhi/vidhayak nidhi and other deposit works under edd-budaun (semi turnkey). - cartage of following material from store center nawada, budaun to je store/je store to site of work including loading & unloading at both ends maximum distance up to 30 km., a) pcc pole 8.5 mrt long/st pole 11 mtr long., b) 11 kv xlpe cable of 3x70/3x120/3x185/3x300 sq.mm., c) 250/400 kva t/f., d) 11 kv ct/pt unit of different size, e) 11 kv jointing kit of different size, f) 11 kv pilfer proof cubical of different size, g) lt abc cable of size 1x16, 3x50, 3x95, 3x120 sq.mm., cartage of line material (11 kv pin insulator, disc insulator, stay set, cross arm, gi wire, earthing rod, ms channel, ms angle, etc) from store centre to dump site & then dump site to site of work on day to day basis, including loading & unloading at both ends maximum distance up to 30 km., cartage of 10 kva & 25 kva transformer from store centre to site of work including loading & unloading at both site, the work of safe carriage 11 kv o/g vcb store center nawada budaun to work of site distance up to 0 to 30 km including safe loading & unloading., cartage of 63 kva to 100 kva transformer from store centre to site of work including loading & unloading at both site., earthing of each 11 kv line pole & t/f properly after drive of electrodes if size 20mmx250mm and connection the earthing point with gi wire., erection of pcc pole 8.5 mtr long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of soil including back filling of the pole with proper ramming after completion of work., erection of stp pole 11 mrt long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of soil including back filling of the pole with proper ramming after completion of work., fabrication and fixing of all 11 kv h.t/l.t. line accessories., erection of double pole on pcc pole 8.5 mtr/stp 11 mtr. long after digging of pit of required size including fabrication and fixing of top channel, droper channel & base channel alongwith, fixing all 11 kv accessories, fuse set 11 kv pin insulators and making connection properly., construction of new plinth for 250/400 kva as per uppcl norms, mounting of 250/400 kva t/f on plinth as per uppcl norms, providing and fixing wiremess fencing for 250/400 kva, erection/installation of following of vcb o/g in consumers site and cable joint of the panel to including earthing, grouting, anchor bolt of panel of making/repairing of pocket for cable to insert in panel form trench and fixing taping of busbar with wiring for ac,dc connection including providing ac and dc supply., chemical earthing for 250/400 kva t/f neutral and body complete, chemical earthing for vcb o/g, mounting of 10 & 25 kva t/f with proper jumping of ht side and fixing of cable on lt. side of t/f making connection properly., mounting of 63 & 100 kva t/f with proper jumping of ht side and fixing of cable on lt. side of t/f making connection properly., mounting of ct/pt unit with proper jumping of ht side and fixing of cable on lt. side of meter cubical properly, fixing of meter cubical as per uppcl norms, making a section pole to exist pole after fabrication & fixing of t channel fixing of all 11 kv accessories., erection of stay rod complete after digging a pit of size 1.20 x 0.60 x 1.6 mtr and grouting the same in block of size 0.60 x 0.60 x 0.30 mtr and nuzzling at the both ends and filling the pit with excavated earth soil with proper ramming., laying lifting stringing of proper sagging of acsr weasel/rabbit/dog conductor for 3 phase, 3 wire 11 kv line including binding & jumpering properly., laying lifting stringing of proper sagging of 11 kv xlpe cable of 3x70, 3x120, 3x185, 3x300 sq.mm., laying of underground 11 kv xlpe cable of 3x70, 3x120, 3x185, 3x300 sq.mm. sizes with open trench by brick & sand as per uppcl norms., filling the 11 kv jointing kit (joint kit providing by c

CTN :40064870

27 May, 2025 NA

Chandigarh - Chandigarh

Tender For bid to ras bid to ras supply of mahindra veh spare parts - panel assy body side rh high , fender assy rh , fender assy lh , bracket assy fender front rh , panel shot gun outer rr rh , panel assy shot gun outer frt rh , panel assy shot gun rh , panel assy shot gun lh , panel assy shot gun outer frt lh , panel shot gun outer rr lh , cross member assy front upper , panel assy head lamp lh , cross member assy lower , panel assy head lamp rh , panel assy wheel house front rh , panel assy wheel house front lh , panel assy windshield outer top , panel assy windshield inr top , latch assy hood , lever assy latch hood , assy hood stay rod , alloy rim 18 inch , sensor tpms , cap assy wheel hub high , mirror assy orvm rh high , mirror assy orvm lh high , grill frt outer , gap hider grill front rh , mesh grill frt , gap hider grill front lh , grill frt inner , fender bezal assy frt rh , fender bezel assy frt lh , trim frt dr delta assy lh , trim frt dr delta assy rh , trim stone guard , splash shield front wheel frt lwr rh , front apron rh , splash shield front wheel frt lwr lh , front splash shield lh , front splash shield rh , cladding assy rr wheel arch rh , cladding assy frt wheel arch rh , cladding assy rr wheel arch lh , cladding assy frt wheel arch lh , foot step assy lh , foot step assy rh , bumper fascia front , cap foglamp front lh , bracket assy bumper frt lh , cap foglamp front rh , bracket assy bumper frt rh , assy center top bracket bumper fr , front bumper winch cover , facia rear bumper , panel hood assy , hinge assy hood lh , hinge assy hood , hood catcher assy lh , hood mounting bracket rh , seal hood side lh , hood catcher assy rh , seal hood side rh , seal hood on body rr , weatherstrip hood fr , bumper hood overslam , hood mounting bracket lh , panel assy door front rh , hinge assy frt door rh , seal glass run channel rh , waist seal outer rh , waist seal inner rh , seal edge beading rh , weatherstrip door opening otr rh , reg elect frt door window rh , handle assy door inner rh - mic black , handle assy door frt outer rh , check arm door frt , latch assy door frt rh , glass windshield , glass door frt rh , glass door frt lh , kit glass assy qtr window rh , kit glass assy qtr window lh , kit glass assy door back , kit hinge assy windshiled rear , gas strut hardtop lift glass , panel roof front , rear hardtop assy high , head lamp , tail lamp rh , tail lamp lh , rear reflex reflector rh , rear reflex reflector lh , high mount stop lamp , hose assy air cleaner out let , hose assy breather gsl , assy fuel pipe filler gasoline , module fuel delivery gsl , sensor lambda , sensor lambda top linear , pipe assy exhaust interm , cv joint , paint 2kd , thinner 2kd , putty , shinner , rubbing compound 250 gm pack , rubbing brush , harderner 2k , nc putty , front hub with bearing , hose pipe small and big , common rail sensor , 2431n pipe , assy clutch tube , tail light assy , fuel filter , fuel pump , fornt brake disc pad set , air filter , brake shoe rear set , engine oil filter , ignition coil , spark plug , uj cross , clutch plate , pressure plate , concentric slave cylinder , crank sensor , cam sensor , front shocker , rear shocker , wiper blade , wheel cylinder rear , rear brake drum , front disc rotor

CTN :40412114

26 May, 2025 NA

Mathura - Uttar Pradesh

Tender For deposit work in the area of edsd-laxminagar under edd-laxminagar, mathura - carriage of 8.5 mtr long pcc pole from 132 kv store center mathura to site of work through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work.(distance 00-70 kms.), carriage of 9/11 mtr long st pole from 132 kv store center mathura to site of work through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work.(distance 00-70 kms.), carriage of 16 kva transformer from store centre, mathura to pit site with loading & unloading at both ends, carriage of 25 kva transformer from store centre, mathura to pit site with loading & unloading at both ends, carriage of 63/100 kva transformer from store centre, mathura to pit site with loading & unloading at both ends, carriage of 250 kva transformer from store centre, mathura to pit site with loading & unloading at both ends, carriage of 11 kv xlpe cable size 3x70/3x120 sq.mm. cable form store center mathura/agra including cost of shifting of drum from inside of store, removing of cable from drum and re-rolling of extra removed cable including loading & unloading at both ends., carriage of 11 kv xlpe cable size 3x185/3x300 sq.mm. cable form store center mathura/agra including cost of shifting of drum from inside of store, removing of cable from drum and re-rolling of extra removed cable including loading & unloading at both ends., carriage of line material i.e. conductor, g.i. wire tpmo stay rod, disc insulator, cross arm, angle channel and other required material from store center at 132 kv substation mathura to the site of work including loading and unloading of material at both ends., erection of single pole structure 8.5 mtrs on pcc pole by digging of pits fitting of all relevant accessories as per respo norms., erection of single pole structure 9/11 mtrs on st pole by digging of pits fitting of all relevant accessories as per respo norms., erection of double pole structure 8.5 mtrs on pcc pole by digging of pits fitting of all relevant accessories as per respo norms., erection of double pole structure 9/11 mtrs on st pole by digging of pits fitting of all relevant accessories as per respo norms., installation of stay set with grouting and nuzzling etc. as per respo drawing along with all routine material to be used for such works., earthing of poles by fixing earthing rods and binding with earth wire as per standard norms including cost of labour t&p and required material for such work., laying, sagging stringing and binding of acsr weasel conductor on the erected pcc pole/stp including jumpering as per respo manual., laying, sagging stringing and binding of acsr dog conductor on the erected pcc pole/stp including jumpering as per respo manual., laying, sagging stringing and binding of arial bunch conductor on the erected pcc pole/stp including jumpering as per respo manual., laying, sagging stringing and binding of lt pvc cable on the erected pcc pole/stp including jumpering as per respo manual., laying of 11 kv xlpe cable size 3x70/3x120 sq.mm. in the trench/g.i pipe/hdpe pipe and re-dressing of trench after laying of xlpe cable for proper completion of work as per direction of supervising engineer., laying of 11 kv xlpe cable size 3x185/3x300 sq.mm. in the trench/g.i pipe/hdpe pipe and re-dressing of trench after laying of xlpe cable for proper completion of work as per direction of supervising engineer., filing of cable box as suitable size as per direction of supervising engineer., filing of straight through as suitable size as per direction of supervising engineer., chopping of tree branches to clear the route properly., mounting of 16 kva transformer on the double pole/plinth struct

CTN :40412121

27 May, 2025 NA

Mathura - Uttar Pradesh

Tender For deposit work in the area of edsd laxminagar under edd-laxminagar, mathura - carriage of 8.5 mtr long pcc pole from 132 kv store center mathura to site of work through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work.(distance 00-70 kms.), carriage of 9/11 mtr long st pole from 132 kv store center mathura to site of work through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work.(distance 00-70 kms.), carriage of 16 kva transformer from store centre, mathura to pit site with loading & unloading at both ends, carriage of 25 kva transformer from store centre, mathura to pit site with loading & unloading at both ends, carriage of 63/100 kva transformer from store centre, mathura to pit site with loading & unloading at both ends, carriage of 250 kva transformer from store centre, mathura to pit site with loading & unloading at both ends, carriage of 11 kv xlpe cable size 3x70/3x120 sq.mm. cable form store center mathura/agra including cost of shifting of drum from inside of store, removing of cable from drum and re-rolling of extra removed cable including loading & unloading at both ends., carriage of 11 kv xlpe cable size 3x185/3x300 sq.mm. cable form store center mathura/agra including cost of shifting of drum from inside of store, removing of cable from drum and re-rolling of extra removed cable including loading & unloading at both ends., carriage of line material i.e. conductor, g.i. wire tpmo stay rod, disc insulator, cross arm, angle channel and other required material from store center at 132 kv substation mathura to the site of work including loading and unloading of material at both ends., erection of single pole structure 8.5 mtrs on pcc pole by digging of pits fitting of all relevant accessories as per respo norms., erection of single pole structure 9/11 mtrs on st pole by digging of pits fitting of all relevant accessories as per respo norms., erection of double pole structure 8.5 mtrs on pcc pole by digging of pits fitting of all relevant accessories as per respo norms., erection of double pole structure 9/11 mtrs on st pole by digging of pits fitting of all relevant accessories as per respo norms., installation of stay set with grouting and nuzzling etc. as per respo drawing along with all routine material to be used for such works., earthing of poles by fixing earthing rods and binding with earth wire as per standard norms including cost of labour t&p and required material for such work., laying, sagging stringing and binding of acsr weasel conductor on the erected pcc pole/stp including jumpering as per respo manual., laying, sagging stringing and binding of acsr dog conductor on the erected pcc pole/stp including jumpering as per respo manual., laying, sagging stringing and binding of arial bunch conductor on the erected pcc pole/stp including jumpering as per respo manual., laying, sagging stringing and binding of lt pvc cable on the erected pcc pole/stp including jumpering as per respo manual., laying of 11 kv xlpe cable size 3x70/3x120 sq.mm. in the trench/g.i pipe/hdpe pipe and re-dressing of trench after laying of xlpe cable for proper completion of work as per direction of supervising engineer., laying of 11 kv xlpe cable size 3x185/3x300 sq.mm. in the trench/g.i pipe/hdpe pipe and re-dressing of trench after laying of xlpe cable for proper completion of work as per direction of supervising engineer., filing of cable box as suitable size as per direction of supervising engineer., filing of straight through as suitable size as per direction of supervising engineer., chopping of tree branches to clear the route properly., mounting of 16 kva transformer on the double pole/plinth struct

State Government

CTN :40408332

29 May, 2025 22.14 Lacs

Kottayam - Kerala

Tender For target for the year 2025-26-1st phase- fabrication of 2line , 4 line cross arm, 1.8m ,2.4 m and 3m channel cross arm in production shop, c. m. division, pallom.

CTN :40435033

09 Jun, 2025 24.07 Lacs

Deesa - Gujarat

Tender For e-tender for the work of fabrication of various item as per schedule-b for various sd/n under deesa do-1.-, labour charges for fabrication of v-x arm from, 65x65x6mm m.s. angle, labour charges for top fitting from, 65x65x6mm m.s. angle and 50x6mm m.s. flat, labour charges for anchor rod from, 65x65x6mm m.s. angle and 16 mm sq m.s, round bar, labour charges for turn buckle from, 65x65x6mm m.s. angle and 16mm sq m.s, round bar, labour charges for fabrication of eye bolt from, 16mm sq m.s round bar, labour charges for fabrication of c clamp(u), for lt shackle insulator made from 50x6mm, m.s. flat, labour charges for fabrication of earthig coils, made from g.i.wire no.8, labour charges for fabrication of side clamp, for psc pole made from 50x6mm m.s. flat, labour charges for fabrication of stay clamp, pair for psc pole made from 50x6mm m.s. flat, labour charges for fabrication of three hole, patti made from 50x6mm m.s. flat, labour charges for fabrication of (9ft) 2.75 mtr, angle made from 65x65x6mm m.s. angle, labour charges for fabrication of (4ft) 1.200 mtr, angle from 65x65x6mm m.s. angle, labour charges for fabrication of (2.6ft) 0.75, mtr angle made from 65x65x6mm m.s. angle, labour charges for fabrication of 760 mm, d.o.angle made from 65x65x6mm m.s. angle, labour charges for fabrication of (9ft) 2.75 mtr, , channel made from100x50x6mm m.s channel, labour charges for fabrication of x-arm (2.6ft), 750mm made from 100x50x6mm ms channel, labour charges for fabrication of (9ft) 2.75 mtr, angle cross arm made from 50x50x6 mm m.s., angle, labour charges for fabrication of (2.6ft) 0.75, mtr angle made from 50x50x6mm m.s. angle, labour charges for fabrication of 1200 mm, h.t.extension made from 100 x 50 x 6 mm, m.s.channel & 50 x 6 mm m.s. flat

Steel Cross Arm Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

State Government

State Government