Latest steel enclosure Tenders | Government steel enclosure Tenders

Central Government / Public Sector

CTN :40561487

27 Jun, 2025 NA

Vijayawada - Andhra Pradesh

Tender For supply, installation & commissioning of high current injection test kit as per sp ecification attached. note- the item must be in sheet steel enclosure, in proper cooled cons truction suitable for indoor use in maximum atmospheric temperature of 45 degree centigr ade. make: vivid or similar. note: the similar make firms with past performance of the tendered/same ite ms subject to submission of proof of documents such as pos/r note are only eligible. [ warranty period: 30 months after the date of delivery ]

CTN :40556674

21 Jun, 2025 NA

Parganas - West Bengal

Tender For supply of double door , 8-way tpn db double door , 12-way tpn db double door , 6-way vtpn db double door with mccb incomer , 8-way vtpn db double door with mccb incomer , 12-way tpn db double door with mccb incomer , 32a main switch in sheet steel enclosure , 63a main switch in sheet steel enclosure , 100a main switch in sheet steel enclosure , 125a main switch in sheet steel enclosure , 32a hrc fuse , 63a hrc fuse , 100a hrc fuse , 125a hrc fuse , digital time switch , 3p 25 a automatic modular contactor , 1ph led ammeter cl 1 , 1ph led voltmeter cl 1 , red, yellow, green, amber indicating lamp , blue, white indicating lamp , ammeter selector switch , voltmeter selector switch , terminal 6mm size nut bolt , terminal 8mm size nut bolt , 1.5 sqmm copper wire , 2.5 sqmm copper wire , 4 sqmm copper wire , 6 sqmm copper wire , 10 sqmm copper wire , 16 sqmm copper wire , 2 core 1.5 sqmm copper flexible cable , 2 core 2.5 sqmm copper flexible cable , 3 core 1.5 sqmm copper flexible cable , 3 core 2.5 sqmm copper flexible cable , 4 core 1.5 sqmm copper flexible cable , 4 core 2.5 sqmm copper flexible cable , 2.5 sqmm copper pin sockets , 4 sqmm copper pin sockets , 6 sqmm copper pin sockets , 10 sqmm copper pin sockets , 16 sqmm copper pin sockets , 25 sqmm copper pin sockets , 6 sqmm copper ring sockets , 10 sqmm copper ring sockets , 16 sqmm copper ring sockets , 25 sqmm copper ring sockets , 10 sqmm aluminium bottle sockets , 16 sqmm aluminium bottle sockets , 25 sqmm aluminium bottle sockets , 35 sqmm aluminium bottle sockets , 50 sqmm aluminium bottle sockets , 70 sqmm aluminium bottle sockets , 10 sqmm aluminium flat sockets , 16 sqmm aluminium flat sockets , 25 sqmm aluminium flat sockets , 35 sqmm aluminium flat sockets , 50 sqmm aluminium flat sockets , 70 sqmm aluminium flat sockets , 95 sqmm aluminium flat sockets , 150 sqmm aluminium flat sockets , 185 sqmm aluminium flat sockets , single compression cable gland for 16 sqmm cable , single compression cable gland for 25 sqmm cable , single compression cable gland for 35 sqmm cable , single compression cable gland for 50 sqmm cable , single compression cable gland for 70 sqmm cable , single compression cable gland for 95 sqmm cable , double compression cable gland for 185 sqmm cable , 20mm dia pvc pipe , 25mm dia pvc pipe , 12 per20 mm pvc casing , 20 per25 mm pvc casing , 25 per32 mm pvc casing , 20mm gi bar saddle , 25mm gi bar saddle , 20mm pvc saddle , 25mm pvc saddle , pvc l for 20 mm dia pvc pipe , pvc t for 20 mm dia pvc pipe , pvc bend for 20 mm dia pvc pipe , pvc l for 25 mm dia pvc pipe , pvc t for 25 mm dia pvc pipe , pvc bend for 25 mm dia pvc pipe , 1 way pvc circular box , 2 way pvc circular box , 3 way pvc circular box , 4 way pvc circular box , ceiling rose with box , batton holder , 3 inchx3 inch box , 8 inch per6 inch jb box , 1 inch screw stainless steel 200 nos. perpacket , 1.5 inch screw stainless steel 100 nos perpacket , 2.5 inch screw stainless steel 100 nos perpacket , wooden fashnut gutkha , 3 per4 aluminium strip , 6 mm 2.5 inch fastener , 6 mm 3 inch fastener , 8 mm 2.5 inch fastener , 8 mm 3 inch fastener , 10 mm 2.5 inch fastener , 10 mm 3 inch fastener , 12 mm 2.5 inch fastener , 12 mm 3 inch fastener , 6 mm 1.5 inch nut, bolt, with double washer , 6 mm 2 inch nut, bolt, with double washer , 6 mm 2.5 inch nut, bolt, with double washer , 8 mm 1.5 inch nut, bolt, with double washer , 8 mm 2 inch nut, bolt, with double washer , 8 mm 2.5 inch nut, bolt, with double washer , 10 mm 1.5 inch nut, bolt, with double washer , 10 mm 2 inch nut, bolt, with bid details/ 2 / 119 double washer , 10 mm 2.5 inch nut, bolt, with double washer , 150mm cable tie , 200mm cable tie , 300mm cable tie , pvc insulation tape , electrical contact cleaner crc , 150mm 6 inch sweep exhaust fan , 225mm 9 inch sweep exhaust fan , 300mm 12 inch sweep exhaust fan , 450mm 18 inch sweep heavy duty exhaust fan , 600mm 24 inch sweep heavy duty exhaust fan , spray paint color for c

Central Government / Public Sector

CTN :40530138

30 Jun, 2025 NA

Bhubaneswar - Odisha

Tender For supply of disconnecting and earthing device, 8 pole, 2 way, without off, on load 125a at 1000v ac, 2no+2nc and heavy handle and pad locking arrangement in one position, mounted in a stainless steel enclosure suitable for ac 23 duty and conforming to iec:60947, maximum depth including handl e 480 mm. accepted make: m/s l&t-salzer (cat. no. 74168slb32logbss) / m/s schaltbau (cat. no. m 137.0827407.r1) / m/s techno trendz (cat. no. is81210tt19l) / m/s kaycee (part. no. 12580892a34v 49xe)/any other make approved by rdso in the list of bill of materials (bom) of switch board cabinets . [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40500520

11 Jun, 2025 NA

Multi City - Multi State

Tender For supply of disconnecting and earthing device 8 poles, 2 way no-off, on load, 63 amps, 750 v ac (1000v insulation) 2 no+ 2 nc with heavy handle without stainless steel enclosure suitab le for ac 23 duty, confirming to is/iec 60947 as per cat. no. m137.0827407 of m/s schaltbau or cat. no. 73342sib03logbs of m/s l&t/salzer. suitable for eog lhb non-ac coaches confirming to rcf specification no. 2013 edts-355 rev 1 or latest. [ warranty period: 30 months after the dat e of delivery ]

Central Government And Public Sector

CTN :40241811

04 Jun, 2025 6.08 Lacs

Chandigarh - Chandigarh

Tender For corrigendum : tender for supply of 4500 cmtr tublar steel pole , gi pole coolar with cement concrete , dp sheet steel enclosure , 50 w led flood light fixtures , 50 w led street light , 9 w led bollard light , 4 core 2 point 5 sqmm copper conductor , 3 core 1 point 5 sqmm copper wire , g i pipe earthing , 6 swg dia gi wire

Central Government/Public Sector

CTN :40503496

14 Jul, 2025 NA

Kanakapura - Karnataka

Tender For supply of ferritic steel sheet 5x1250 x 3000 mm., as per drawing: rdso spec no.c-k201, gr ade x2crni12 (409m) table 1&2. heat treatment condition 2d as per table-5., packing instruc tion: stainless steel sheets, coils and plates:- (a) stainless steel (austenitic & ferritic st eel) coils. the coil shall be protected in reasonably good condition to withstand nor mal handling hazard during transit with the following provision as the barest minimu m: i) coil should be wrapped with a layer of water proof paper through out whole leng th. ii) coil should be wrapped with a layer of biodegradeable sheet. iii) outer & inner of coil should be wrapped with gi sheet. iv) side of the coil should be covered with card b oard sheet. v) after this whole coil should be wrapped with biodegradeable plastic sh eet of suitable thickness. vi) the inner edge of the coil should be protected by gi ring f ollowed by another iron ring. vii) outer edge of the coil should be wrapped with gi rin g. viii) coil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on the circumference of the eye. ix) whole coil shoul d be mounted on wooden blocks for easy lifting/stacking. x) the sheets in coil form fo r thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 100 0-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness below 2 mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil 5.0 - 10 tonnes. (b) stainless steel (austenitic & ferritic steel plates/sheets) i) the sheet s/plates shall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/plate s hall be seprated with a layer of water proof paper, after this the whole bundle shoul d be wrapped with double layer of water proof paper and a biodegradeable plastic she et of suitable thickness. a metal protection in edges should also be provided. ii) all bu ndles shall have a minimum of 2 hoops upto 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling. mechanical damange & corrosion during transit if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40468611

04 Jun, 2025 27.21 Lacs

Meerut - Uttar Pradesh

Tender For tender for supply of supplying of 3.0 tr ductable split ac unit , supplying of 1.5 tr ductable split ac unit , itc of 3.0 tr ductable , itc of 1.5 tr ductable , ms bracket compatible with outdoor unit , stand for outdoor unit , 1/4 inch dia. (od) 1.2mm thickness , 3/8 inch dia. (od) 1.2mm thickness , 1/2 inch dia. (od) 1.2mm thickness , 5/8 inch dia. od) 1.2mm thickness , 3/4 inch dia. (od) 1.2mm thickness , 40 mm dia. , 25 mm dia. , 3 x 4.0 sq.mm , 3 x 1.5 sq mm , copper conductor armoured cable of 4 x 2.5 sq.mm , supplying and fixing fp sheet steel enclosure , thickness 0.63 mm sheet , thickness 0.80 mm sheet , providing & fixing supply air grills , cable tray 150mm width x 50mm x 1.6mm thickness , without aluminium faced surface , with aluminium faced surface , providing and fixing of sandwitched artition , charging of refrigerant

Central Government And Public Sector

CTN :40473078

18 Jun, 2025 NA

Raigarh - Chhattisgarh

Tender For i) supply of lt copper distribution panel fabricated from 16 swg crca, powder coated with copper bus bar of required size suitable for 400a as i/c 02 nos. mccb 3pn, 400 a , outgoing are -4 no. mcc b 3p,100 a, 1 no. mccb 3p, 63 a with rotary handle are i/c having r/y/b indication, metering arrangement etc. complete with supply of manual changeover in sheet steel enclosure, rated current:400a, three phase 415v, 4pole suitable for horizontal and/or vertical mounting with extended handle, terminal shrouds, sour ce separator and phase barriers. make: l&t or equivalent at ib station. ii)transportation, installation, testin g & commissioning of lt distribution panel with earthing arrangement ( 3 nos.) complete with all accessori es at ib station. [ warranty period: 30 months after the date of delivery ]

CTN :40402903

10 Jun, 2025 NA

Chittorgarh - Rajasthan

Tender For supply of crca sheet steel enclosure with dimension 200 x 200 x 150 mm as per annexure , crca sheet steel enclosure with dimension 300 x 300 x 200 mm as per annexure , crca sheet steel enclosure with dimension 400 x 600 x 200 mm as per annexure

Central Government/Public Sector

CTN :40365950

09 Jun, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of disconnecting & earthing device, 8 pole, 2 way, without off, on load 125 amp at 1000 v olt ac, 2 no+2 nc and heavy handle and pad locking arrangement in one position, mounted in a stainl ess-steel enclosure suitable for ac 23 duty and conforming to iec 60947 maximum depth including han dle 480mm, as per bom sr. no.1 of rdso l.no.el/7.1.108/mssbc dtd.17.09.2021,place of installation s 1a2 of rdso spec no.rdso/pe/spec/ac/0192-2018 (rev-1) make:- schaltbau, salzer-l&t, techno -tren dz and kaycee (25% qty) only. material to be supplied with oem proof of purchase test & warranty certi fied. [ warranty period: 30 months after the date of delivery ]

Steel Enclosure Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors