Latest steel flat Tenders | Government steel flat Tenders

State Government

CTN :43467490

13 Jan, 2026 NA

Delhi - Delhi

Tender For s/i/t/c of e/m equipments and allied works for newly re-bored tube well at okhla vihar near majar in okhla constituency ac-54. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 15 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point: 200-125-75 lpm on 89-124-133 mtr. head.having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved. , supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted. a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no. b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 no c) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no. e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable banking g) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos.complete wiring &installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated and pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs. make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., supply of ms nut bolts off size as per requirement., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 1x1 made out from 6mm thick m.s. sheet in 2 halves and a circular hole in centre 3-1/2 dia. with locking arrangement by nuts and bolt. , earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

Central Government/Public Sector

CTN :43501907

21 Jan, 2026 NA

Varanasi - Uttar Pradesh

Tender For tender for supply of supply of bi pin halogen lamp 200w , 6.6a suitable for mirl/hirl fitting complete as per site requirement. make- osram cat no.64386 or equivalent as per preferred make of aai. , supply of halogen lamp wih inbuilt holder of 105w , 6.6a , suitable for ocem make (p/n - slre-s-cpc-1p-200-o , code - 007.6255) inset type runway edge light fitting. model-64339 a 105-6.6 , make-osram or equivalent as per preferred make of aai. , supply of halogen lamp wih inbuilt holder of 105w , 6.6a , suitable for ocem make (p/n - slre-s-cpc-1p-200-o , code - 007.6255) inset type runway edge light fitting. model-64339 c 105-6.6 , make-osram or equivalent as per preferred make of aai. , supply of runway lamp holder suitable for 200 w bi pin halogen lamp complete as required as per site requirement. , supply of led strip for led based airfield signages suitable to be operated on input source of 2.5 amp to 6.6 amp constant current , 20v-25 v dc supply compatible for signboards complete as per site requirement. 1.2 mtr strip , supply of led strip for led based airfield signages suitable to be operated on input source of 2.5 amp to 6.6 amp constant current , 20v-25 v dc supply compatible for signboards complete as per site requirement. 0.7 mtr strip , supply of bi-directional elevated high intensity halogen type runway edge light fitting complete with prefocus lamp holder , upto 200 watt 6.6 a halogen lamp , clear outer prismatic dome , clear inner prismatic lens , 180 degree yellow filter/lens , 180 degree clear filter/lense , lense holding mechanisam , ball joint for easy leveling , breakable coupling , central column mounting assembly , gaskets , two pin secondary lead plug suitable for connection , base plate with 6 nos. m-10 stainless steel bolts , spring and plain washers and other accessories etc. and confirming to particular specification with lens including lamp etc. as required to meet latest icao requirement. make- as per aai approved make. , supply of 180 degree yellow filter lense suitable for 200 w ama make elevated type runway fitting as per site requirement. , supply of 180 degree yellow filter lense suitable for 200 w vardhman make elevated type runway fitting as per site requirement. , supply of 180 degree red filter lense suitable for 200 w vardhman make elevated type runway fitting as per site requirement. , supply of green spreader lense/glass suitable for elevated type runway threshold light fittings of make - thorn. , supply of green spreader lense/glass suitable for elevated type runway threshold light fittings of make - ama. , supply of clear spreader glass/lens suitable for elevated type simple approach light fitting of make - ama. , supply of red spreader lense suitable for elevated end light fitting of make - ama. , supply of red spreader lense suitable for elevated end light fitting of make - thorn , supply of reflectors suitable for elevated type thresold light fittings of make - thorn. , supply of reflectors suitable for elevated type simple approach light fittings of make - ama. , supply of 180 degree clear filter lense suitable for 200 w ama make elevated type runway fitting as per site requirement. , supply of isolating transformers of 200w , 20/6.6 amp rating of 5 kv grade , 50hz , series type , encapsulated in polyester resin finally moulded with neoprene rubber with primary and secondary connections as specified in particular specifications , complete as required. , supply of ss earth bolts of m10 x 25 mm suitable for fixing the housing box/msas per site requirement. , supply of 9 watts led bulb , 230v , 50hz , ac supply suitable for normal holder. , supply of red filter with holder (complete replacable kit) suitable for runway edge light inset fitting of ocem make (p/n - slre-s-cpc-1p-200-o , code - 007.6255) as per site requirement. , supply of yellow filter with holder (complete replacable kit) suitable for runway edge light inset fitting of ocem make (p/n - slre-s-cpc-1p-200-o , code - 007.625

corporations/Associations/Others

CTN :43504975

29 Jan, 2026 NA

Cuddalore - Tamil Nadu

Tender For supply of hot rolled steel beam, column, channel and angle sections (v2) conforming to is 808 (q3)

CTN :43504235

21 Jan, 2026 NA

Parganas - West Bengal

Tender For supply of tool & die steel flat as per specification is: 3748- 1990, to designation 118t3 size: 250mm x 50mm. , tool & die steel flat as per specification is: 3748- 1990, to designation 118t3, size: 250mm x 30mm , tool & die steel flat as per specification is: 3748- 1990, to designation size: 250mm x 45mm. , tool & die steel flat as per specification is: 3748-1990, to designation 118t3, size: 250mm x 20mm. , tool & die steel flat as per specification is: 3748-1990, to designation 118t3, size: 250mm x 10mm.

CTN :43504991

29 Jan, 2026 NA

Chhindwara - Madhya Pradesh

Tender For supply of steel flat as per is 2062 (q3)

CTN :43489884

28 Jan, 2026 NA

Chhindwara - Madhya Pradesh

Tender For supply of steel flat as per is 2062 (q3)

CTN :43488069

22 Jan, 2026 NA

Valsad - Gujarat

Tender For supply of steel flat as per is 2062 (q3) , hot rolled steel flats as per is 1730 (q3)

Central Government And Public Sector

CTN :43501212

12 Jan, 2026 NA

Katihar - Bihar

Tender For supply & testing of 3 core, 120 sq mm, ht 11 kv (e) cable : stranded compact circular aluminium conductor, conductor screen with extruded semi conducting compound, xlpe insulated, insulation screening with extruded semi conducting compound in combination with copper tape, cores laid up , innersheath of pvc tape, galvanised steel flat strip armoured, and overall pc sheahed cable conforming to is 7098 / (part-ii)1985 with latest amendment.

Central Government/Public Sector

CTN :43487562

28 Jan, 2026 NA

Parganas - West Bengal

Tender For tender for supply of procurement of steel rod and flat : : -steel rod 12 mm dia 35nc6 ht air 9160c , steel rod 30 mm dia 35nc6 ht air 9160c , steel rod 40 mm dia 35nc6 ht air 9160 c , steel rod 50 mm dia 35nc6 a air 9160c , steel rod 110 mm dia 35nc6 a air 9160c , steel rod 160 mm dia 35nc6 a air 9160c , steel rod 200 mm dia 35nc6 a air 9160c , steel flat 60mm x 40mm 35nc6 ht air 9160c

Central Government And Public Sector

CTN :43458957

27 Jan, 2026 1.98 Crore

Rawatbhata - Rajasthan

Tender For supply , storage, handling, erection, installation, commissioning and testing of electrical equipment like power and control cable ,cable trays and supports lighting system and earthing system at rr site in oesc system. - supply and installation of following pre-fabricated and galvanized cable tray supporting structure materials as per specification, tender drawing (raps-1to8/ 01652/2053/ga) and reference drawings nos. kapp-3&4/ 21490/ 2002, 2003 & 2004/dd., 22 (22 mm dia) first rod with m22x55 long threading on one end & m 22 hex nut, isa 65x65x6, 22 (22 mm dia) rod, isa 65x65x8, ismc 75 channels, couplers (36 odx6 thk.), weld attachment (made of 75x10 thk. plate,320 long), swivel washer seat (46 x16 thk.), swivel washer (40 x16 thk.), iso 1234, 3.5x32 spilit pin, shear bolt m10x70 with hex. head & nut & washer, iso 1234, 3.5x20 split pin, washer (48 , is 2016), 3 mm thick l clamp with m8x30 mm long bolt, 2 plain washer, 1 spring washer and nut, 600mm long, 30 mm wide & 2.5 mm hot dip galvanized strip with two nos. of m8x30 mm long bolt, 4 plain washer, 2 spring washer and 2 nuts, supply and installation of following sizes of 1100v rated, cu conductor, xlpe insulated, frls pvc (st2) inner and outer sheathed un-armoured power cables along with wooden cable drums, 3cx2.5 sq.mm, 4cx2.5 sq.mm, 2cx2.5 sq.mm, supply and installation of following medium duty gi pipes/ heavy duty erw rigid conduits for routing cables from cable trays to distribution boards or to various field equipment or between equipment as directed by engineer- in- charge., 100 mm dia pipe, 65 mm dia pipe, 40 mm dia pipe, 25 mm dia conduit, supply and termination / connection of following types and sizes of 415v power cables at both ends along with cable glands, lugs, ferrules, clamps, hardware etc., and drilling of gland plates, crimping of lugs for termination of following cables (source end & load end considered separately)., supply of 3.5cx300, al, unarmoured, supply of 3.5cx185, al, unarmoured, supply of 4cx16, cu, unarmoured, supply of 3cx6, cu, unarmoured, supply of 4cx2.5, cu, unarmoured, supply of 3cx2.5, cu, unarmoured, supply of 2cx2.5, cu, unarmoured, termination / connection of 3.5cx300, al, unarmoured, termination / connection of 3.5cx185, al, unarmoured, termination / connection of 4cx16, cu, unarmoured, termination / connection of 3cx6, cu, unarmoured, termination / connection of 4cx2.5, cu, unarmoured, termination / connection of 3cx2.5, cu, unarmoured, termination / connection of 2cx2.5, cu, unarmoured, supply and termination of lugs for the following power cables (suitable bi-metallic connector shall be provided for termination of aluminium cable on copper bus bar) (neutral core lug shall be of suitable size)., lugs for 3.5cx300, al, unarmoured, lugs for 3.5cx185, al, unarmoured, lugs for 4cx16, cu, unarmoured, lugs for 3cx6, cu, unarmoured, lugs for 4cx2.5, cu, unarmoured, lugs for 3cx2.5, cu, unarmoured, lugs for 2cx2.5, cu, unarmoured, supply and installation of mortar based fire stops and fire break for all floor & wall openings of cable trays and in the run of cable trays and for sealing of electrical conduits including supply of structural steel support material if required., supply of 3 hr. rated fire stop for cable penetration in floor/walls + fire stop for cable/wire conduits & pipe sleeves, supply of 30 minute rated fire retardant compound (fire break) over cable, installation of 3 hr. rated fire stop for cable penetration in floor/walls + fire stop for cable/wire conduits & pipe sleeves, installation of 30 minute rated fire retardant compound (fire break) over cable, supply and installation of following sizes of gi conduits including supply & installation of all accessories like bends, elbows, couplers, hospital saddles, spacers, gi junction boxes, gi pull boxes, etc., and other accessories required to complete the job on wall/ column/ ceiling etc. as per specification and drawings. (the run

Steel Flat Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

Central Government And Public Sector

Central Government/Public Sector

Central Government And Public Sector