Latest steel flume Tenders | Government steel flume Tenders

Central Government/Public Sector

CTN :44465883

15 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : supply of tee flange (stainless steel) 25x25x20 nb for air braked passenger coaches. drawing no.:- rdso/sk-96074, alt . (2) item-1 specification: - 04-abr-2019 (rev.-2 ) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45136759

19 May, 2026 NA

Kota - Rajasthan

Tender For mechanical liquid level content gauge using a flot to move the dial pointer via a magnetic coupling, side mounting type, flange: stainless steel, ingress protection : ip67 suitable for diesel tanks fitted in icf make lhb power cars as per icf specification / drawing no. lr 90105, make:- icf approved make metlord, alloys/ gaurav associates / shivalik fasteners or similar. note: 1.this item should be procured from oem/authorized dealer only to quote with documentary evidence along with offer. oem authorization letters specific to the tendered item and the tender number to be submitted along with offer . general or open-ended authorization letters shall not be considered valid. firm must submit oem dispatch challans, oem invoices, delivery documents, or direct oem dispatch confirmation at the time of supply. only warranty certificates issued and duly signed by the oem will be accepted. vendor-generated or self-issued warranty certificates using oem logos, formats, or templates shall not be accepted.) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45137910

19 May, 2026 54.25 Lacs

Chandrapur - Maharashtra

Tender For supply of tie rods ms set of 8 nos part no. 149hpb27 , shaft en 8 part no. hpb68 , rotating assly ci part no. rae , impeller key steel part no. hpb625 , balance valve bush bronze part no. hpb634 , balancing valve bronze part no. hpb69 , bearing block d cast iron part no. hpb67 , bearing block s cast iron part no. hpb630 , bearing cover s and d cast iron part no. hpb61 , bearing housing s and d cast iron part no. hpb62 , disc seat bronze part no. hpb619 , discharge bush bronze part no. hpb636 , discharges casing cast iron part no. hpb610 , gland flange s and d cast iron part no. hpb65 , guide vanes cast iron part no. hpb613 , impeller cast iron part no. hpb611 , intermediate stage assly cast iron part no. is149b6 , neck ring stage ring d cast iron part no. hpb626 , seal cage bronze part no. hpb631 , shaft sleeve d cast iron part no. hpb628 , shaft sleeve s cast iron part no. hpb66 , sleeve key s and d steel part no. hpb621 , sleeve nut s and d en 8 part no. hpb64 , splash ring s and d rubber part no. hpb629 , stage ring s cast iron part no. hpb618 , stage ring big cast iron part no. hpb635 ) /bid number : gem/2026/b/7508036 * /dated: 09-05-2026 & & / bid document 1 / 24

CTN :45012572

11 May, 2026 NA

Pune - Maharashtra

Tender For bid to ras supply of hydraulically regulated door closers conforming to is 3564 (q3) , tower bolts (non-ferrous metals) v2 as per is 204 (q2) , copper sulphte , tcca 90 , caustic soda , brass float valve 40mm with pvc ball , brass float valve 50mm with pvc ball , dwc pipe cable duct nominal outer dia 4030mm and minimum inner dia 30mm , dwc pipe cable duct nominal outer dia 5038mm and minimum inner dia 37mm , dwc pipe cable duct nominal outer dia 7561mm and minimum inner dia 56mm , dwc pipe cable duct nominal outer dia 1201035mm and minimum inner dia 90mm , dwc pipe cable duct nominal outer dia 200175mm and minimum inner dia 150mm , power contactor 16 a 3p 415v , power contactor 32 a 3p 415v , led flood lights 100 w with buit in drivers , led flood lights 50 w with buit in drivers , kpt pprc pipe 25mm , kpt pprc pipe 40mm , kpt pprc pipe 50mm , kpt ppr reducer 5025mm , slip on ppr c steel inlay flange 25mm , slip on ppr c steel inlay flange 40mm , slip on ppr c steel inlay flange 50mm , flange core stub end 25mm , flange core stub end 40mm , flange core stub end 50mm , slipon pprflanges 25 mm , slipon pprflanges 40 mm , slipon pprflanges 50 mm , plain union 25mm , plain union 40mm , plain union 50mm , 4 way cross tee 40mm , pipe clamp 25 mm , pipe clamp 50 mm , long plug 34 , long plug 1 , tank connector 20 mm , tank connector 25 mm , female threaded elbow 2512 , male threaded elbow 2512 , double union ball valve 25mm , by pass bend 25mm , deep freezer 350 ltr make blue star voltas daikin or equivalent , desert cooler 1350 rpm 11kcfm make kenstar symphony crompton , water cooler hot and cool 8040 ltr stainless steel make bluestar usha voltas , wall mounted fan 450mm bldc make atomberg bajaj havells , refrigerator double door 398 ltr inverter type make whirlpool samsung lg , plywood 8 x 4 12mm bwr , dwc hdpe pipe of dia 250 mm with elastomeric rubber rings and couplers conforms to is 16098 part 2 3013 , dwc hdpe pipe of dia 300 mm with elastomeric rubber rings and couplers conforms to is 16098 part 2 3013

CTN :45118963

18 May, 2026 NA

Delhi - Delhi

Tender For supply of anabond , metal putty , screw black 2 inch , steel angles 50x50x50 mm , throttle body cleaner , welding rod , automatic voltage regulator avr , coupling flange , injector assy , carburator assy , hose pvc

CTN :45119017

29 May, 2026 NA

Mathura - Uttar Pradesh

Tender For supply of latest is and description , supply and install non return valve nrv of ci of size 50 mm as per latest is and description , supply and fixing stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle, of dia 20 mm as per latest is and description , supply and fixing stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle, of dia 15 mm as per latest is and description , supply and fixing mild steel pot strainer of 100 mm bore as per latest is and description , supply and fixing new mild steel ystrainer of 80 mm bore as per latest is and description , supply and fixing new mild steel ystrainer of 65 mm bore as per latest is and description , supply and fixing new mild steel ystrainer of 50 mm bore as per latest is and description , supply and install pressure gauge in the pipe lines suitable for dia 15 mm pipe as per latest is and description , supply and install thermometers in the pipe line suitable for dia 15 mm as per latest is and description , gi pipe medium grade of 50 mm dia , gi pipe medium grade of 20 mm dia , gi pipe medium grade of 15 mm dia , supply assembly and erection of pgi sheet with tdf flange of thickness 22 gauge sheet as per description , m and l for duct insulation with 25 mm thick all as per description , m and l for wraping glass cloth incl uv chemical coating over nitrile rubber. thickness of glass cloth shall be provided as per oem recommendation , m and l for supply air grilis with extruder aluminium powder coated and size and type of air grills alongwith air volume shall be provided as per oem recommendation , m and l for return air grills with extruder aluminium powder coated without air volume control shall be provided as per oem recommendation , dismantling old false ceiling any type as per description , supply and install 3 way valve of ci of size 80 mm dia , demolition of brick work or floor as per description , m and l for brick work with sub class b brick straight or curved as per description , m and l for plastering 12 mm thick on fair faces of brick as per description , m and l 150 mm thick cement concrete 1 ratio 2 ratio 4 type b2 40 mm graded broken stone aggregate as per description , supply laying testing xlpe cable insulated heavy duty 1100 volts aluminium conductor of size 150 sq mm 3 and half core as specified and directed , m and l for 100 mm bore steel tubing light grade complete all as specified and as directed , supply laying testing xlpe cable insulated heavy duty 1100 volts aluminium conductor of size 95 sq mm 3 and half core as specified and directed , m and l for xlpe insulated armoured ug cables 3 point 5 core x 50 sqmm 1100 volts grade aluminium conductor including termination complete as specified and directed , m and l for xlpe insulated armoured ug cables 3 point 5 core x 35 sqmm 1100 volts grade aluminium conductor including termination complete as specified and directed , m and l for xlpe insulated armoured ug cables 4 core x 16 sqmm 1100 volts grade aluminium conductor including termination complete as specified and directed , m and l for earthing complete with gi earth plate electrode 600 x 600 x 6 mm thick burried directly in ground with 32 x 6 mm gi strip , sitc of lt control panel board cubical type indoor type floor mounted weather proof fabricated out of 2 point 0 mm crca sheet ae per drawing.

Central Government/Public Sector

CTN :45094170

16 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of spare parts-impact machines-50 items - bevel gear for machine model pnc-4 m1 o/a- 200/13/868 3pn008343a, bevel gear (crankshaft) for machine model pnc-4 m1 o/a-200/13/868 3pn008344a, mataflax coupling for machine model pnc-4 m1 , o/a-200/13/868 dbz163 4pn-004068a, taper fit coupling, spline shaft to mataflax for machinemodel pnc-4 m1 , o/a- 200/13/868 - spline shaft 3pn-004031awith tapered sleevv 3pn-004032, toothed coupling , spline shaft to bevel gear for machine model pnc 4m1 o/a 200/13/868 -radial shaft 3pn 008403bwith bush 4pn-125029, linear bearing complete (set of cage, housing &rollers) for slide for machine model pnc-4 m1 -o/a 200/13/868, cam box assembly fitted with proximity switches, htdtiming belt, htd driven pulley with flange - 2 nos. for machine model pnc-4 m1 , o/a- 200/13/868, clutch plate with liners, for machine model- pnc-4 m1o/a- 200/13/868, brake plate with liners for machine model- pnc-4 m1 o/a- 200/13/868 - 3pn-004031a/3pn-004032, spline shaft with taper sleev for for machine model pnc-4 m1 -o/a 200/13/868 3pn-004031a/3pn-004032, connecting rod-rear ,jointless, matl- c-45, forged steel, complete intermediate shaft unit- indexing mechanism, pinion shaft assembly, for intermediate shaft unit, sensor cum micro switch for reverse setting/turnover, oil seal 70 x 90 x10 for machine model pnc-12.5 -o/a 200-06-606, bevel gear for machine model pnc-12.5 o/a- 200-06-606, bevel gear (crank shaft) for machine model pnc-12.5, cam box assembly fitted with 03 nos. proximity switches, flat belt ntb extremultus lg-20 -2110 x30 endless, clutch plate with liners for machine model- pnc-12.5, brake plate with liners for machine model- pnc-12.5 -o/a, connecting rod (rear), jointless matl c-45 forged, spindle for main gear z4 for indexing, linear bearing complete (set of cage, housing & rollers, spline shaft with taper sleev for machine model pnc-12.5, mataflax coupling for machine model pnc-12.5 o/a 200-09, taper fit coupling, spline shaft to mataflax for machine, toothed coupling, spline shaft to bevel gear, rocker arm for machine model pnc-12.5 o/a- 200-09-703, adaptor shaft for machine model pnc-12.5 o/a- 200-09-703, complete intermediate shaft unit- indexing mechanism, pinion shaft assembly consisitng of- worm shaft - 1 no, sensor cum micro switch for reverse setting/turnover, ball(adjusting) screw (connecting front connecting, connecting rod-rear jointless matl- c-45 forged, spindle for main gear z4 for indexing for machine, crank shaft for machine model pnc-12.5 o/a 200-92-878, cam box assembly fitted with 03 nos. proximity switches, complete intermediate shaft unit- indexing mechanism, pinion shaft assembly, for intermediate shaft unit, sensor cum micro switch for reverse setting/turnover, bevel gear for ameteep model pnc-12.5, o/a no. 200.92.878, bevel gear (crank shaft) ameteep model pnc-12.5, o/a no, clutch plate with liners for machine model- pnc-12.5, brake plate with liners for machine model- pnc-12.5 -, spline shaft with taper sleev for machine model pnc-12.5, mataflax coupling for machine model pnc-12.5, taper fit coupling, spline shaft to mataflax, toothed coupling, spline shaft to bevel gear, rocker arm for machine model pnc-12.5 o/a- 200.92.878

Central Government/Public Sector

CTN :45103728

14 May, 2026 NA

Mysore - Karnataka

Tender For supply of flange welded joint 20 nb (pipe to equipment) as per drawing no. lw36306. one number of this item consists of item no. 01, 02, 03 and 04 of drawing lw36306. material spec: stainless steel -ss304.note: as per spec.no.04-abr-2002(rev.1 of 2017) [ warranty period: 30 months after the date of delivery ]

CTN :45109607

15 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For supply of stainless steel flange with drilled holes

CTN :45090802

20 May, 2026 NA

Saran - Bihar

Tender For supply of wafer-type butterfly valve - round flange, size - 100 nb, end connection - wafer type, application - oil line, body material - cast iron, dimensional details (all dimensions are in mm):- flange outer dia. (od) - 215, seat outer dia. (od) - 105 pcd (pitch circle diameter) - 180, sealing dia. - 95, mounting hole centre to centre distance - 145 hole dia. - 18, no. of holes - 4 bolt holes positioning - 90 degree spacingdisc dia. - 136, face to face thickness - 95 liner thickness - 3, total valve body thickness - 40 valve body inner portion thickness - 16 shaft centre spacing/mounting gap - 75 overall height of valve - 242, material of construction:- cap bolt (m8) - stainless steel/ mild steel, cap - aluminium, locking pin - mild steel, washer - teflon, thrust nut - mild steel, o ring - nitrile rubber, top pin - mild steel, rivet - mild steel, disc - mild steel, bottom pin - mild steel, valve body - cast iron, stop pin - mild steel. required make :- petson or similar [ warranty period: 30 months after the date of delivery ]

Steel Flume Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector