Latest steel hangar Tenders | Government steel hangar Tenders

State Government

CTN :40505230

13 Jun, 2025 10.76 Lacs

Haveri - Karnataka

Tender For providing qc necessary equipments for qulity control labs in qc charges of work construction of kittur rani chennamma residential school at akkur village sno 98 guttala hobli in haveri taluka,haveri district - item code: sl no 1 (data rate), item description: electronic weighing, balance with battery backup of capacity 30, kg accuracy - 5 gm ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 3 (data rate), item description: electronic weighing, balance with battery backup of capacity 1kg, and accuracy-1mg ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 5 (data rate), item description: stainless steel depth, guage-150mm long ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 6 (data rate), item description: slump cone complete with, base plate and graduated tamping rod. ---- in, addition to the conditions displayed in the, kppp portal, separate general conditions, sheet uploaded and should be considered, item code: sl no 9 (data rate), item description: core cutter, dolly and, rammer of 9.5 kg one set ---- in addition to, the conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 10 (data rate), item description: rapid moisture meter, apparatus with calcium carbide powder box, 1no packed in wooden box with calibration, report ---- in addition to the conditions, displayed in the kppp portal, separate, general conditions sheet uploaded and, should be considered, item code: sl no 11 (data rate), item description: bitumen extractor hand, operated with handle ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 12 (data rate), item description: filter paper ( bundle of, 100 pieces) ---- in addition to the conditions, displayed in the kppp portal, separate, general conditions sheet uploaded and, should be considered, item code: sl no 13 (data rate), item description: benzene ---- in addition, to the conditions displayed in the kppp, portal, separate general conditions sheet, uploaded and should be considered, item code: sl no 14 (data rate), item description: bosch digital camber, board range120 cm (bosch dnm120i digital, inclinometers) ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 15 (data rate), item description: digital temperature meter, / thermometer with sensor (o c to 300 c), with accuracy of +/-0.1 degree centigrade ----, in addition to the conditions displayed in the, kppp portal, separate general conditions, sheet uploaded and should be considered, item code: sl no 17 (data rate), item description: cast iron concrete cube, mould 15x15x15cm as per isi standard (set, of 3 cubes) ---- in addition to the conditions, displayed in the kppp portal, separate, general conditions sheet uploaded and, should be considered, item code: sl no 18 (data rate), item description: cast iron concrete beam, mould for flexural test 150x150x700 mm as, per isi standard ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 19 (data rate), item description: iron tray 10x12" ---- in, addition to the conditions displayed in the, kppp portal, separate general conditions, sheet uploaded and should be considered, item code: sl no 20 (data rate), item description: iron tray 12x18" ---- in, addition to the conditions displayed in the, kppp portal, separate general conditions, sheet uploaded and should be considered, item code: sl no 21 (data rate), item description: digital r

Central Government/Public Sector

CTN :40540279

20 Jun, 2025 NA

Hyderabad-T - Telangana

Tender For supply of office table executive l shaped gm , office table executive hods , office table , office chair executive gm , office chair executive hods , office chair executive , conference chairs executive , visitor chair , visitor sofa 2 plus1 plus1 seater , visitor sofa 2plus 2 plus2 seater , visitor sofa 3 plus 1 plus 1 seater , centre table glass , file storage racks glass storewel , dining tables 8 seater , portable kitchen pantry cabinet , personnel locker unit plu 4 lockers in each unit , high base revolving chair with backrest , computer table , centre table with glass , sofa set 3plus1plus1 , 3 seater sofa , vertical filing cabinet , cot with mattress , side table , office cupboard , sofa cum bed , visitors chairs , steel almirah

CTN :40289846

02 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For bid to ras purchase of spares - nut (a1-1-15) , nut m18 plain(jcb super plate xxx i ac) , bolt m18x90(jcb super xxx i ac) , joint water outlet (44tc plate-w) , radiator bottom hose(jcb super xxvii b-17) , de spanner 27x32(jcb super, plate- v11 d) , strut gas door(plate-iv j-1) , tail lamp left side(item no-906) , door seal right hand (jcb super page 95) , fuel pipe fuel filter to fuel pump(ms-174) , fuel pipe feed pump to fuel filter(ms-175) , arm wiper blade assy(item no- 957) , handle door right handle(plate-iv o-9) , hose assy suction(item no - 1202) , light hand lamp 12v , element fuel sediment filter(u v-2162) , bulk head hose(plate-xiii j-2) , secondary element(ispl sl-1904) , gasket for cyl head thickness 1.25(ms-156) , motor wiper linkage assy(plate-1x g-1) , injector assy(vs turbocharged engine)(ms -171) , hose 3 by 4 inch bsp usp 2150mm(plate-xxxi aa-15) , set piston ring 0.50 o s , header for cooler and filter( ms-177) , silencer exhaust box 240x150mm(p-627) , tool pyramide (plate- xxxi aa-21) , tools kit (set of 41items) , bonded washer seal, 1 by 2 inch bsp , bolt plough 3 by 4 inch unf x 23 by 4 inch bs311 type-9(sl-60) , cab base mounting , repair kit , oil seal(ms-183) , pin pivot( ms sl no-4) , hose 1 by 4 inch x 1 by 4 inch bspx520 long , bearing linner( ms-20) , filter engine oil , element suction(jcb 3dx plate b1-2-1 sl no 4) , wiper arm(ms-80) , lock handle with key(ms sl-51) , seal kit (ispl sl no 1513) , filter element , gaiter gear lever , light rear combination lh tail lamp lh (c1-3-11) , element fuel filter 30micron(sl no-xxx c-8) , leaver tipping (plate-vi t-1) , brake piston , seal rear( ms sl no-131e) , bush , plate pressure clutch 6.0mm (ms sl no-212) , seal , kit spider 106.4x43.9 dia(plate-f3-1-1) , rod seal , seal(ms sl-33) , brush carrier assy(ms-192) , v-belt (b-57) , throttle lever & control assy(jcb ispl sl no 806) , seal kit(ms-126) , lead bty positive ( ms sl no- 65) , seal shaft(ms sl no-131g) , brake shoe(ms-187) , thermosted abi(item no-2491) , bearing (h1-1-1 by 13) , filter assy , pressure hose(escou) , fuel maint filter 5 micron jcb 3dx super) , injector(item no-2526) , plate brake counter(ms sl no-144a) , tool kit standard(jcb super) item32 nos qty34 nos , unloader valve with inflator (ispl-97) , kit spider(jcb f1-6-10) , filter fuel assy.(item no-2132) , grease bucket pump , propshaft (p92)(price list-51883) , valve solenoid assembly(ctlg 3dx f5-1-1) , king post carriage(item no-647) , boom assy (jcb 3dx u v) plate b4-4-1 , drive head (item no-1536) , axle steer drive(item no-1521) , decal panel , dowel , spring(ms sl-64) , bolt banjo , rubber hose(plate-l1-4-10) , brush spring(ms-191) , seal,filter cap ( plate no- b1-3-2, sl no- 6a) , horn 12v (plate-c1-12-2) , bty cover (ms-67, jcb u v) , sealing ring ce(ms-190) , relay f r (ms sl-140) , cleaner active wiper(iv r-12,383) , adhesive(iv,r-10) , rh handle , jug oil 200cc , fan belt xpa1280(ispl 4r1040t sl-1 p-79) , oil seal hsg (plate-2h096) , feed pump (side opening)(ms -170) , cable assy throttle controll(ms-96(a)) , water pump assy , pump oil (f5-1-1 e jcb) , roof moulding(plate-iv e-1) , set piston ring 0.75 o s , fuel injection pump vs mico(ms-169) , alternator 12v 65amp(ms-197) , pump hydraulic(jcb super) , radiator aluminium (plate-xxxiii) , backhoe bucket 21 inch wide (ispl plate-k04) , clutch assy , rear axle assy 30 kph , seal kit(ms sl-62) , ignition switch (ispl escou sl no 637) , pressure plate(ms sl-429) , hose suction main hydraulic pump(e2-1-1) , hose , hose 1 by 2 inch x 1 by 2 inch bspx660mm long str , hose(plate-e1-2-1 by 13) , thermostat element(ms-164) , solenoid switch(ms-181) , pivot pin alloy steel(ms sl-18) , fuel filter , lead bty negative (jcb 3dx (u v) ms ser no 66) , rocker arm adjusting screw(ms sl-539) , link track rod (plate-f1-3010) , engine fan-21(jcb super) , alternator(item no-75) , grease bucket pump , kit seal main hyd pump(plate-e2-2-1) , drive assy(4r1040t starter page 70) , armature assy

CTN :40540699

20 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of complete stores for living shelter 16 men fems - main columns will be made of 100m x 100m x 4mm square section of 3 length , wind breaker columns c1 will be made of 80mmx40x3 point 2 mm rhs 2 x 2 point 70 mtr and 2x2 point 40 mtr , purlin should be made of rhs 80 x 40 x 2 point 9mm of length 2 point 60 mtr and 2 nos purlin of size 80x40x2 point 9mm of length 1 point 5 mtr for wind braker , truss made of rhs main member of 80x40x2 point 9mm , runner of length 2 point 53 mtr and 04 nos gable side runner of length 2 point 40 mtr made of shs 40x40x3 point 2mm , pedestal of height zero point 30 mtr made of shs 150mmx150mmx6mm , wind breaker a cabin of size 1500mm x 1500mm made of 4 nos ms square tube 80mmx40mmx3.2mm and hight 02 nos 2 point 70 and 2 nos 2 point 40 ht with 60mm thick puf panel , double bunks ms of size 1930mm x 930 x 1840 at leg side and 910mm hight with 02 nos mattress with each bunk , ladder shall be provided on kg side in between long rial connecting lower bunk and upper bank , mattress smart ortho mattress ultimate back pain relief of size 1890mm x 800mm , all nuts and bolts used for joining the structural members shall be of high quality and varieties of bolts as per specification , sun shade for door and window openings will be provided with 450mm wide sun shade made out of same material as of roof sheets matching with roof colour as per technical specification documents , suitable flashing with zero point 6mm thick pre coated sheet of matching colour with panels will be provided at all joints between roof and wall corners as per specification , lightning conductor made of copper tube 150cm long x 25 mm dia with five copper prongs of length 15cm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , earthing of building provided using 3mm dia gi earth wire connecting to main board to gi earth plate of size 60cm x60cm 6mm thick , lower outer frame rhs 80mm x 40mm 2.9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower gable outer frame rhs 80mm x 40mm x 2 point 9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower cross tie beam rhs 66x33x2 point 9mm has to be fitted with the columns in the u channel fitted at the lower side of the columns , floor panel 6 mm thick vinyl sheet of approved colour over 18mm thick bwp oblique bwr isi ply board shall be shall be provided for floor , pedestals will be made of 150x150x6mm sections of height 300mm with base plate of size 400x400x 12mm , foundation for all pedestals will be of pcc 1 2 4 type b1 20mm graded stone aggregate of size 450x450x900mm over the sub base 100mm thick pcc 1 4 8 using 40mm graded stone aggregate , field heating device , sleeves for field heating device as per specification , peg sets will be provided stainless steel premium fesue dual edge 8 pin cloth hanger bathroom wall door hooks , curtain rods for all openings of doors and windows of shelter will be provided with drapery rods made of 25mm dia , looking mirror of size zero point 5 x 1 point 65mm with wooden frame , iron foot scrapper for size 600mm x 450mm will be provided for entrance doors , iron foot mat for size 1200mmx900mm comprising of internal wire mesh of gauge 18 swg will be provided for entrance doors , all electric items shall be isi marked as per specification , stainless steel shoe rack and shoe stand and multipurpose stand of 31x24 inch , swing open to top dust bin stainless steel 12x28 inch 50l , supply only transitional end table with open shelvees size 24x22x18 inch , stainless steel heavy duty double pole 3 lalyer foldable and moveable prince jumbo cloth drying stand brc 786 ss grey , ordinary portland cement grade 43 and is 12269 to 1990 and packed in 50 kgs hdpe bags , coarse sand , stone aggregate shall be crushed stone 20mm graded conforming to is 383 1970 , stone aggregate shall be

CTN :40539961

20 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of complete stores for living shelter 16 men fems - main columns will be made of 100m x 100m x 4mm square section of 3 length , wind breaker columns c1 will be made of 80mmx40x3 point 2 mm rhs 2 x 2 point 70 mtr and 2x2 point 40 mtr , purlin should be made of rhs 80 x 40 x 2 point 9mm of length 2 point 60 mtr and 2 nos purlin of size 80x40x2 point 9mm of length 1 point 5 mtr for wind braker , truss made of rhs main member of 80x40x2 point 9mm , runner of length 2 point 53 mtr and 04 nos gable side runner of length 2 point 40 mtr made of shs 40x40x3 point 2mm , pedestal of height zero point 30 mtr made of shs 150mmx150mmx6mm , wind breaker a cabin of size 1500mm x 1500mm made of 4 nos ms square tube 80mmx40mmx3.2mm and hight 02 nos 2 point 70 and 2 nos 2 point 40 ht with 60mm thick puf panel , double bunks ms of size 1930mm x 930 x 1840 at leg side and 910mm hight with 02 nos mattress with each bunk , ladder shall be provided on kg side in between long rial connecting lower bunk and upper bank , mattress smart ortho mattress ultimate back pain relief of size 1890mm x 800mm , all nuts and bolts used for joining the structural members shall be of high quality and varieties of bolts as per specification , sun shade for door and window openings will be provided with 450mm wide sun shade made out of same material as of roof sheets matching with roof colour as per technical specification documents , suitable flashing with zero point 6mm thick pre coated sheet of matching colour with panels will be provided at all joints between roof and wall corners as per specification , lightning conductor made of copper tube 150cm long x 25 mm dia with five copper prongs of length 15cm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , earthing of building provided using 3mm dia gi earth wire connecting to main board to gi earth plate of size 60cm x60cm 6mm thick , lower outer frame rhs 80mm x 40mm 2.9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower gable outer frame rhs 80mm x 40mm x 2 point 9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower cross tie beam rhs 66x33x2 point 9mm has to be fitted with the columns in the u channel fitted at the lower side of the columns , floor panel 6 mm thick vinyl sheet of approved colour over 18mm thick bwp oblique bwr isi ply board shall be shall be provided for floor , pedestals will be made of 150x150x6mm sections of height 300mm with base plate of size 400x400x 12mm , foundation for all pedestals will be of pcc 1 2 4 type b1 20mm graded stone aggregate of size 450x450x900mm over the sub base 100mm thick pcc 1 4 8 using 40mm graded stone aggregate , field heating device , sleeves for field heating device as per specification , peg sets will be provided stainless steel premium fesue dual edge 8 pin cloth hanger bathroom wall door hooks , curtain rods for all openings of doors and windows of shelter will be provided with drapery rods made of 25mm dia , looking mirror of size zero point 5 x 1 point 65mm with wooden frame , iron foot scrapper for size 600mm x 450mm will be provided for entrance doors , iron foot mat for size 1200mmx900mm comprising of internal wire mesh of gauge 18 swg will be provided for entrance doors , all electric items shall be isi marked as per specification , stainless steel shoe rack and shoe stand and multipurpose stand of 31x24 inch , swing open to top dust bin stainless steel 12x28 inch 50l , supply only transitional end table with open shelvees size 24x22x18 inch , stainless steel heavy duty double pole 3 lalyer foldable and moveable prince jumbo cloth drying stand brc 786 ss grey , ordinary portland cement grade 43 and is 12269 to 1990 and packed in 50 kgs hdpe bags , coarse sand , stone aggregate shall be crushed stone 20mm graded conforming to is 383 1970 , stone aggregate shall be

CTN :40522831

18 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of surface dressing n exc 15 cm deepin hard oblique dense soil , excavating over areas not exceeding 1 point 5 m deep for foundations and getting out in hard oblique dense soil complete all as specified and directed , excavating over areas exceeding 1 point 5 m deep not exceeding 3 m deep for foundations and getting out in hard oblique dense soil complete all as specified and directed , excavating over areas exceeding 3 m deep for foundations and getting out in hard oblique dense soil complete all as specified and directed. , returning filling in including spreading and levelling and watering and well ramming in layers not exceeding 25 cm each , removing excavated material n exc 50m and depositing where directed at a level n exc 1 point 5 m above the starting point , m and l for hard core of gauge n exc 63 mm and deposeted and spread and levelled in layers n exc 15 cm thick and watered and rammed to a true surface complete all as specified and as directed , m and l cement concrete in fdn and 40 mm graded aggregate complete all as specified and as directed , m and l cement concrete 40 mm graded aggregate in sub base of flooring complete all as specified and as directed , m and l cement concrete 40 mm graded aggregate complete all as specified and as directed , m and l cement concrete 20 mm graded aggregate complete all as specified and as directed , m and l for rcc m30 reinforced cement concete design mix in foundation including rafts and footing and foundation beams and bases for column and etc basement slabs under reamed piles , m and l for mild steel tmt bar 10 mm dia and over cut to length and bent to shape required , m and l for mild steel tmt bar 8 mmn dia and overm cut to length and bent to shape required , m and l formwork to sides of rough finished flat surface of concrete foundations and footings and bases of colums and raft and raft beams and sides and sffits , m and l formwork to rough finished flat surface soffits of suspended slabs such as roof slabs and floor slabs and landing and similar work not exceeding 200mm thick horizontal or sloping all , m and l formwork to rough finished flat surface in sides and soffits of floor or roof beams and beam haunchings and girders and bressummers , formwork to faces of walls and retaining walls and butments and parapets and staircase railings and similar work including attached pillasters and buttresses , m and l formwork to edges of rough finished surfaces of concrete flats and trends and breaks in floors windows cills and concrete railing and openings in concrete walls and floor and roofs , m and l liquid water proofing compund , m and l for verified ceramic wall tiles light shade 10 mm thick square oblique rectangular polished and area of each tiles not exceeding zero point 36 sqm and in floors , m and l for verified ceramic non skid tiles light shade 10 mm thick square rectangular polished and area of each tiles not exceeding zero point 36 sqm , m and l for screed bed or bedding laver of mortar 15 mm thick for laying floor finished complete all as specified and as directed , m and l rendering 15 mm thick on wall on fair faces of bricks work or concrete surfaces complete all as specified and as directed , m and l rendering 10 mm thick on ceiling on fair faces of bricks work or concrete surfaces complete all as specified and as directed , m and l rendering 10 mm thick in on fair faces of bricks work or concrete surfaces complete all as specified and as directed , m and l preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed , m and l for preparation of wall surfaces including priming coat and wall care putty and applying two coats of distemper oil emulsion , m and l for preparing new plastered surfaces of wall and applying two coats of cement based paint complete all as specified and as directed , s and f anodised aluminium window and ventilator shutters and side hung type without sash bars and al

CTN :40541621

19 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of complete stores for sentry post - main columns 04 nos gable column 04 nos are made of ms shs 70mm x 70mm x 3 point 20mm of 2750 mm long , truss 02 nos and all are made of ms rhs bottom and top chord of size 80 x 40 x 2 point 60 mm including providing one side slope , purlins 04 nos of 2400 mm long shall be made of ms rhs 60 x 40 x 2 point 60mm , runners 08 nos made of ms shs 40 x 40 x 2 point 60 mm , base frames 4 nos made of ms rhs 80 x 40 x 2 point 60 mm and length of each 2400mm , necessary pedestals are made of bottom base plate of size 300x300x6mm at the bottom , all nut and bolts with washers of size m 16 x 50 and m 12 x 50 and m 12 x 75 and m 12 x 100 and m 8 x 75 used as per requirement for base plates and connection plates for various structural members , the puf panels shall be 60 mm thick made using zero point 50 mm ppgi skins on both sides and cfc free 44 kgs bulk density plus oblique minius 2 kgs puf insulation in between , the floor panels of the shelter shall be 6mm thick ms chequered sheet , all shelter flashing shall be provided using zero point 50 mm ppgi of ral 1001 and ral 9002 as per the colour scheme , the roof slope shall be 40 deg slope and roof shall be provided with zero point 60mm pre coated pre coloured steel of green colour , ridge cover zero zero point 60 mm thick pre coated plain sheet of green colour or as approved colour matching with the roof sheet of size 2400mm long and 600 mm wide will be provided , there are total of 01 types of doors size of 2100 x 1000 x 40 mm and doors shall be provided with ms frame , windows w1 of size 1000 x 1000 mm with aluminum sliding shutters with sheet glass 5 mm thick confirming to is 2553 , sun shed 1300 x 450 mm shall be made of angle iron frames of 30 x 30 x 3mm with pre painted zero point 6mm thick ppgi ral 9002 sheet , electric hand drill machine 10mm along with screw head , drill bits 9 oblique 64 inch in packet of 10 nos , drill bits 1 oblique 8 inch in packet of 10 nos , drill bit adopter 8mm , ring spanner 14 x 15 , ring spanner 16 x 17 , d spanner 15 x 16 , d spanner 17 x 18 , rope 20 mm dia , ball pin hammer 1 kg with wooden handle , insulated electric pliers 6 inch , hack saw frame circular saw , hack saw blades , aluminium spirit level 6 feet long , pgi tool box of size 60cm x 45cm x 30cm , metal cutting and grinding machine 100 mm disc dia and gsw 750 100 and part no 06013940f0 and hsn code 84672900 , mobile single phase welding machine , welding rod , lightning conductor made of copper tube 250 mm long x 25 mm dia with five copper prongs of length 15 cm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , earthing of building will be provided using 4mm dia 3 mtr long gi wire connecting to main board to gi earth plate , pvc casing and capping 25 mm width , led tube light fitting 18w 4 feet long , 15 amp switch and socket combination with gang box , 6 amp switch and socket combination with gang box , bulk head fitting with 9 watt led bulb , switch fuse unit 32 amp in sheet enclosure with side handle , armd cable 2 core 6 sqmm aluminium conductor xlpe insulated pvc type oblique extrucded inner sheathed for multicore cable armoured , pvc cable copper conductor 1 point 5 sqmm , pvc cable copper conductor 2 point 5 sqmm , ceiling rose , pvc gang box 4 way , star headed screws 1 inch , switch p oblique t 6 amp , batten angle holder , led bulb 9 watt , pvc gang box 6 way , pvc gang box 1 way , pvc square box 4 x 4 inch , insulation tape rolls , pvc flexible pipe for externally exposed wiring as per sample , flexible wire , mcb 16 amp sp , mcb 32 amp dp , mcb distribution box 4 way with single door , suitable flashing with zero point 6mm thick pre coated sheet of matching colour with panels will be provided at all joints between roof and wall corners , solar lantern mozda solar lantern 23cm x 14cm x 14cm , tarpaulin hdpe cover water proof 30 x 30 feet and 300gsm , keroheater warranty one year after completion of supply

CTN :40556337

21 Jun, 2025 NA

Darjeeling - West Bengal

Tender For supply of elbow 90 degree 25mm , ppr elbow 45 degree 25mm , ppr socket 20mm , ppr union 20mm , stop cock brass suitable for 20mm ppr water supply line , stop cock brass 15mm , stop cock brass 25mm , ppr male threaded socket 20 to15 mm dia. , ppr female threaded socket 20 to15 mm dia , ppr female threaded elbow 20 to15 mm dia , ppr male threaded elbow 20 to15 mm dia , ppr male threaded elbow 25 to 20 mm dia , taeflon tape , pvc float valve 25 mm dia suitable for ppr pipe , 25mm pp tor tank connector , puf insulated water tank 1000ltrs , wash hand basin 500x400mm stainless steel with waste pipe and coupling alongwith 02 nos ci bracket , decorative type ultra slim linear led lighting fixture with extruded polycarbonate environmental , led security light energy saving and environmental as per specification , pvc insulated and pvc sheathed multistranded copper conductor flexible industrial cable1100 volts , pvc sheathead copper frls cable 1 point 5 sqmm single core with multistrand 1100 volts grade in red black green colour volts , pvc sheathead copper frls cable 4 point single core with multistrand 1100 volts grade in red black green colour volts , pvc conduit pipe 20mm 10 feet long , pvc tee 20mm , pvc elbow 20mm , pvc circular jn box 2 to4 way , pvc shaddle with screw , pvc square block , surface plastic box suitable for moduler switches and socket of 4 module , surface plastic box suitable for moduler switches and socket of 3 module , solid plate with base frame suitable for surface plastic box of 4 module , solid plate with base frame suitable for surface plastic box of 3 module , switch piano moduler type 10 amp one way , switch piano moduler type 20 amp one way , socket 10 a modular type , plug and socket spn enclouser with 2 pole and earth metal plug and socket with 20 amps sp mcb , socket multipurpose 3 pin 10 and 3 pin 20 amp modular type of 2 module , insulation tape 10mtr , exhaust fan heavy duty ms body 450mm sweep with louver shutter , xlpe cable pvc insulated aluminium conductor served with inner sheathing of pvc tape pvc sheathed cross sectional area 10 sqmm 2 core , ceiling rose 2 to 3 terminal , mcb db 12 way 240w double door , mcb 6 amp sp 240 volts , mcb 16 amp single pole , mcb 20 amp single pole , mcb spn 63 amps 240 volts , pvc 2 point 5 sq mm copper cable single core frls multistrand conductor for power point , pvc copper cable 1 sqmm single core with solid conductor 1100 volts grade in green colour for ear thing , lc with chemical earthing , elect earthing set with following items , hot water boiler of capacity 150 ltrs , automatic ro plant 300lph , 40watt jumbo flying insect killer uv tube catcher zapper repellent machine electric insert killer of size 635mmx300mmx125mm , invertor and battery combo wave inverter rc 15000 200ah tall tubular battery with trolley box maximium bulb load 600 watt , hevy duty detachable square shape containers with lids with auto cut thermostat system of 2000watt , ir room heater,infared heater 1500w , electrician tool kit , multipurpose non slip rubber reusable gloves , measuring fibre glass tape 5 mtr long , industrial safety helmet , showel square nose 14 gauge blade size 310 x 245 mm shaft size 710 mm fitted with strong steel crutched wooden handles , puf rivet machine , galvanised iron pan mortar tasla 18 gauge 16 inch dia minimum weight 01 kg , hammer earth with handle minimum weight 5 kg without handle , electric tile cutting machine with interchangable blades 05 nos , electrical sheet cutter machine with blade , gum boots superior bid details/ 2 / 61

CTN :40540705

27 Jun, 2025 NA

Pune - Maharashtra

Tender For supply of laboratory equipments and standards as per spec. no. hemrl/qard/spec/2025/lab equipments & standards - acid storage cabinet with exhaust system, capacity: 100-120 liter, qty: 01 no a. construction of cabinet should be minimum 8mm polypropylene panels, which can give protection against harsh acids, alkali and corrosion. b. there should have adjustable and reversible shelves and can be customized. c. the storage should be divided into two parts to store different acids. d. front door of the cabinet shall be in twin door design having glass panel. e. door hasp should accept padlock to achieve double locks and also have safety lock system. f. there should have circulating fans with air vents. , acid storage cabinet with exhaust system, capacity: 220-250 liter, qty: 01 no a. construction of cabinet should be minimum 8mm polypropylene panels, which can give protection against harsh acids, alkali and corrosion. b. there should have adjustable and reversible shelves and can be customized. c. the storage should be divided into two parts to store different acids. d. front door of the cabinet shall be in twin door design having glass panel. e. door hasp should accept padlock to achieve double locks and also have safety lock system. f. there should have circulating fans with air vents. , sample storage cabinet, capacity: 220-250 liter, qty: 02 nos. a. the laboratory sample storage cabinet should be made of pure stainless steel. b. there should have adjustable shelves and can be customized. c. should have double lock system. d. front door of the cabinet shall be in twin door design having glass panel. ?. should be workable within temperature range of 10-50c and humidity of 20-80%. f. door handles shall make of ss 304., glass membrane filtration assembly with three manifold system and vacuum pump & other accessories, qty: 02nos. vacuum filtration assemblies made of borosilicate glass that should be compatible with most organic solvents for solvent filtration purpose. b. funnel, receiver flask & filter support base should be made of borosilicate glass the filter support base design should have an integral vacuum connection located above the filtrate dip such that it can prevent contamination of the vacuum line from droplets. d. it should be three place manifold glass filtration assembly. glass funnel capacity: 300ml f. filter support base with sintered glass filter: 47mm. g glass receiver flask: i) 500ml-01 no, ii) 1000ml-01 no iii) 2000ml-01 no. h. aluminium clamp: 47mm i. effective filtration area: 9.6cm the filtration base should have a silicon stopper. k. all accessories should come with assembly. vacuum pump: , vacuum pumps are to be equipped with vacuum regulator to adjust vacuum. b. vacuum pump should have thermal protection device to shut off the pump automatically when overheated and resume working when temperature cools down. c. max. vacuum (mbar): 100 d. max flow rate (l/min): 17 e. motor rotation (rpm): 1450 , digital rotary shaker, qty: 02 nos. the rotary shakers comprises of shaking platform, speed regulator and timer to adjust duration of orbital motion. b. shaking platform should be made of ss 304 to avoid any kind of rust formation. clamps should be made of either unbreakable plastic or stainless steel d. the housing should be made with thick sheet of mild steel duly powder coated. motion: rotary motion f shaking mechanism: brushless motor used for shaking b digital lcd display with rpm controller provided in the panel. h over temperature alarm. speed (rpm): 20-200 accuracy: 1c k. volume capacity: should be of different sizes like as 16 x 250ml and 16 x 500ml. l platform dimension (inches): 18 x18 m. temperature control: electronic/automatic ceramic hotplate magnetic stirrer, qty: 06 nos. a. digital lcd display with back light. b. big size ceramic hot plate with flame protection and durability. e. heating and stirring can proceed simultaneously. d. temperature & stirring speed is stepless adjusted.

CTN :40538592

24 Jun, 2025 NA

Liluah - West Bengal

Tender For supply of latex printed laminated vinyl pasted on white board fixed with ss strip & flexible nut with sin gle stand stainless steel (grade-304) stand with iron base plate. specification & printing matter on board as per annexure. [ warranty period: 30 months after the date of delivery ]

Steel Hangar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector