Latest steel item Tenders | Government steel item Tenders

Co-operative

CTN :40120374

12 May, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For c s item on conversion supply basis and forged steel item - c.s coupling having material as per is:1030 grade 280-520w for mill size 30"x60" as per drg. supply basis, conversion basis, machining charge, cast steel crown pinion having material is:2708 grade-iii-b for mill size 30"x 60" as per drg.supply basis, conversion basis, machining charge, c.s.trash plate having material as per is:1030 and grade-iii-b supply basis, conversion basis, machining charge, teeth cutting/grooving of trash plate as per drg., c.s.trash beam as per is-1030/is 2708 as per drg.supply basis, conversion basis, machining charge, forge steel tail bar for taxmaco and kcp mill having material c-40/8 as per drg. mh- 6 & mh-56supply basis, conversion basis, forge steel pinion for transmission gear of taxmaco mill as per drg. no. mh 39,material en-24,tensile strength70-80 kg./sqcm, hardness 200-220 bhn, c.s.bearing housing for taxmaco mill as per deg no mh-17-c/04 side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-17-b side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-17-b top roller housingsupply basis, conversion basis, c.s.gear coupling for c/f machine as per drg.no.bh-14 (duly case hardness), c.s. pinion for cane unloader as per drg, cu- 16teeth-17, teeth -18, c.s.sprocket 2" pitch (both pilot bore)(i) no of teeth 18 , boss dia 3", (ii) no of teeth 36 , boss dia 6", c.s.sprocket for boiler rotary feeder as per drg.blr-73/1 pitch- 25.0 mm,no of teeth 21, od -180mm. p.b -25 mm, c.s.sprocket for bagasse elevator (pilot bore) as per drg.mh-75 pitch 50.8 mm,no of teeth 50, od 842.70mm. pcd 808.7mm,teeth thickness 28mm , boss- 270x130 mm, cs sprocket (pilot bore ) as per drg.blr-62 pitch 50.8 mm, no.of teeth-14 pcd 226.49mm,od 258.8mm, static coller of 25 mm thick duly hard faced of 5 mm thick layer . total thick 30 mm after hard facing for taxmaco & kcp mill as per drawing no. mm 105(i) m.s. material, (ii) c.s.material, sprocket of inter carrier od 280 mm,no.of teeth 45.pitch 19.5 mm, c.s. sprocket (duplex) for enter carrier teeth 12, as per drg. mh-72/sample, s.s. wear plate is 304 quality (i) length 435 mm x width 370 mm x thick 15 mm, (ii) length 385 mm x width 330 mm x thick 15 mm, c.s.tresh beam bracket as per sample /drg., c.s.eccentric pin trash bar adjusting device as per drg. mh-133/2024-25, c.s. trash beam adjusting connecting rod for taxmaco mill, as per drg. mh- 297, c.s. bridge wheel for cane unloader as per drg. cu25 (1),, trolly wheel for cane unloader as per sample /drg., pinion gear set for cane unloader as per sample /drg, c.s. pinion (gear) for rbc cross carrier pitch 41 mm. teeth 25 , type of teeth in valute (spur) module 12.7 mm width 125 mm .od 343 mm, bore 2" dia as per drg., clutch shaft for mill. as per drg. mh-76 , en-8for taxmaco mill -sl.no.2, for kcp mill - sl.no.1, cs worm for crystilizer wheel od 290 mm, bore 81 mm.pitch 80 mm complete, groving of c.s. trash plate as per drg., idler wheel gear for cane unloader., no of teeth 68, od-420 mm, module-6, pitch- 18.84 mm, pcd-408 mm, as per drg. no. cu-25 (i), pinion for cane unloader no. of teeth- 33, od-212 mm, pcd-198 mm, pitch- 18.84 mm, module-6 as per drg. no., pinion for cane unloader no. of teeth- 18, od-200 mm, pitch- 35 mm, bore- 50 mm, width-115 mm, module-6, teeth depth-25 mm as per drg. no., break stand complete for cane unloader, size-10", cs sprocket of rbc, nos of teeth 12, as per drg. blr 32/93, chain sprocket for inter carrier clucth shaft, od 280, pcd 270, bore 108, root dia 260, nos of teeth 45, nos of hole 4, as per drg. 001, pinion for transmission gear kcp mill, material en-24(as per drawing no. mh-95/2024-25), c.s. helical teeth pinion, teeth-20, od-60, bore-26, pitch-10(as per drawing no. bh-rg-05/2024-25), c.s. helical teeth pinion, teeth-17, od-62, bore-28, pitch-13(as per drawing no. bh-rg-04/2024-25), chief engineer

CTN :40091532

13 May, 2025 NA

Kolkata - West Bengal

Tender For supply of introducer sheath 8 point 5 fr compatible to swan ganz three lumen flow directed thermodilution pulmonary artery catheter , non absorbable temporary pacemaker electrodes fep 15e, 26mm 1slace2c, taper cut, v 7,60 mm straight reverse cutting, ks breakawayslaceauto-cassable point , valve suture organizer, set of three suture guide , snugger sets adult , disposable coronary micro knife 2mm, crescent knife, straight , steel wire monofilament 45 cms size 6, 1slace2 circle, conventional cutting slace reverse cutting needle, 40 to 55mm, foil of 4 , disposable customised drape set for cabg with adhesive lining with impervious layer and attached instrument and tubing bags adult , disposable customised drape set for valve surgery with adhesive lining with impervious layer and attached instrument and tubing bags , oxidised regenerated cellulose size 2x 4 box of 10 , asepto syringe , e ptfe patch size 2 x 9cm, thickness 0 point 4mm , bovine pericardial patch 10 x 15cm , membrane oxygenator for cardiac surgery adult , kole cardioplegia delivery system , custom pack with filter adult , antegrade cardioplegia needle 14gz with arm , wire reinforced aortic cannula straight tip size 20 f , wire reinforced aortic cannula straight tip size 22 f , wire reinforced aortic cannula straight tip size 24 f , rigid intracardiac sucker adult , pericardial sump suction with weighted metallic tip , intra aortic balloon pump, 34cc, 7slace7 point 5 , intra aortic balloon pump, 30cc 7 slace 7 point 5 fr , intra aortic balloon pump, 40cc, 7 point 5 , haemofilter adult , coronary ostial cardioplegia cannula basket tip adult size 12fr 45 degree angle tip , lv vent adult , coronary ostial cardioplegia cannula basket tip adult size 12fr 90 degree angle tip , coronary ostial cardioplegia cannula basket tip adult size 14 fr 45 degree angle tip , wire reinforced venous cannula, with side holes, size 30 fr , thoracic drainage catheter size 28f , thoracic drainage catherer size 32f , mechanical heart valve aortic,bileaflet, rotatable, supra annular, 22slace23mm ats ap 360, sj regent,conform-x , mechanical heart valve mitral, bileaflet rotatable 28slace29mm ats ap 360,sjm,conform x , polypropylene, blue filament 3slace8 c or 1slace2 c, rbslacetp, da, 60 to 75 cm, size 6slace0, 13 mm needle , polypropylene blue monofilament 70 to75 cm size 4slace0, 1slace2 circle rb 25 mm double needle , umbilical tape , bone wax , steel wire monofilment 75 cms size 5 1slace2 circle heavy needle trocar point 55mm , coseal surgical sealant 4ml , iodine impregnated antimicrobial incise drapes size 60 cm x45 cm , polybutylate coated braided polyster size 5 1slace2 circle taper cut 55 mm single needle , aortic punch 3 point 6mmslace3 point 5mm , aortic punch 2 point 7slace2 point 8mm , steel for sternal sutures size no 6, 1slace2 circle heavy 03 rb needle and 01 needle conventional cutting 48mm, ethi steel, monofilament 45cm foil of 4 , disposable coronary shunts 1 point 75mm , titanium haemostatic clips size medium lt 200 with two applicators and 500 clips open surgery, each cartridge containing 6 clips, each box contains 36 cartridges , aortic punch 3mm , scrub surgical scrubbing brushes 4percentage chlorhexidine impregnated , ptfe felt 10 point 2 x 10 point 2cm, box of 10 , wire reinforced venous cannula st tip size 24 fr , wire reinforced venous cannula st tip size 26 fr , wire reinforced venous cannula st tip size 28 fr , wire reinforced venous cannula st tip size 30 fr , wire reinforced venous cannula st tip size 32 fr , rigid incomplete 3d tricuspid annuloplasty ring, 30mm , rigid incomplete 3d tricuspid annuloplasty ring, 32mm , mechanical heart valve mitral, bileaflet rotatable 30slace31 mm ats ap 360,sjm,conform x , mechanical heart valve mitral, bileaflet rotatable 26slace27 mm ats ap 360,sjm,conform x , st jude heart valves aortic 25mm , bioprosthetic heart valve, bovine pericardial leaflet mitral 25 mm with anticalcification treatment , polypropylene blue monofilament 70

CTN :40083919

02 May, 2025 5.00 Lacs

Surat - Gujarat

Tender For annual rate contract for fabrication of steel items for various subdivision under bardoli division

CTN :40067535

08 May, 2025 NA

Tuticorin - Tamil Nadu

Tender For providing of custom bid for services - supply of structural steel items and replacement of existing corroded steel structural members in bottom ash conveyor system in ash handling system of unit-1 in ntpl

CTN :40062013

03 May, 2025 2.53 Crore

Karanjia - Odisha

Tender For procurement and installation of different instruments for instrumentation of earth dam and spillway in deo irrigation project for the year 2025. - supply of fiberglass reinforced plastic (frp) make universal enterprises an improved venturi plate conformed to is: 9108 for accurate measurement of water flowing through channels comprising of masonry construction provided with pre-fabricated glass fiber lining on both sides, a side chamber provided in one side masonry wall of the said flume on the upstream side, a pipe provided at the bottom of the chamber connecting the said chamber with the water flowing through the notch, a float means provided in the said chamber, enabling recording the rising or falling level of water in the said chamber such as a scale provided in the said chamber, moulded engraved gauge marking in lit/sec and also in centimeter including moulded and engraved discharge table, capacity marking, flow direction, m.s pipe stiffeners, hold fasts, sand treatment on the backside of plate but excluding gst as per the instruction of engineer-in-charge etc. complete, inside spillway foundation gallery - 15 lit./sec. v-notch, seepage drain - 90 lit./sec. v-notch, calibration marks:- supply of polymers composites improved calibration marks make universal enterprises with contact molding process, both side finish, m.s. strip embedded inside, engraved and molded marking for bands and figures covered with radium and covered with two coats of polyurethane for surface protection with marking in reduced levels, sill, fsl, frl, mwl but excluding gst as per the instruction of engineer-in-charge etc. complete, supply vw up-lift pressure meter provision for connected to das make : aimil ltd. uplift pressure meters are used for measuring and recording of uplift pressures acting in foundations of concrete/masonry dams. vibrating wire type uplift pressure meter : range: 0.2 mpa to 5.0 mpa./7ksc accuracy: 0.5 -1 % fs. temp limit: - 10 to 70 deg c. coil resistance: 140 - 160 ohm thermistor: ysi-44005 or equivalent. material: stainless steel cable: 1m, 4-core borehole for uplift pressure meter at foundation gallery (inside spillway) should be straight from foundation level and clear. proposed location : inside spillway foundation gallery in overflow section: 7 no. non overflow section: 2 no. purpose: uplift water pressure measurement. (but excluding gst), supply automatic seepage measuring system make : aimil ltd / sysgeo italy or equivalent vibrating wire water leakage measuring systems are used for measuring water leakage and flow in dam galleries by installing v notch weir coupled with vibrating wire sensor for remote monitoring of water leakage. sensor type: sensor : vibrating wire precision water level sensor range: 300mm resolution: 0.025%fs material : stainless steel excitation : sweep or pluck assembly: v.w. type sensors enclosed in an environmental proof fibre glass box. splicing kit & adhesive required accessories. proposed location : inside spillway foundation gallery: 1 no. toe drain: 1 no. (drainage outlet) purpose: seepage water measurement in liter per second (but excluding gst), supply data logger or data acquisition system aimil make dt85g with cem20 or ace s korea analog channels 16 analog input channels each channel is independent and supports: one isolated 3-wire or 4-wire input, or two isolated 2-wire inputs, or three common referenced 2-wire inputs. expansion requires optional cem20 sampling integrates over 50/60hz line period for accuracy and noise rejection maximum sample speed: 40hz effective resolution: 18 bits linearity: 0.01% common mode rejection: >90db line series mode rejection: >35db vibrating wire frequency range: 500 to 5khz coil resistance: 50 to 200 stimulation method: single pulse pluc digital channels 8 bi-directional channels input type: 8 logic level (max 20/30v) output type: 4 with open drain fet(max: 30v, 100ma) 4 with logic output alarms power supply , sim card will be in your scope. propo

State Government

CTN :40059377

25 Apr, 2025 NA

Jhajjar - Haryana

Tender For quotation for hiring of hydra machine, mild steel items/ m s nut bolt, glan dori, carriage of material, repair of sluice valve

Central Government/Public Sector

CTN :40082023

02 May, 2025 NA

Mandal - Gujarat

Tender For supply of m.s structural steel> - different types of ms steel items, uc 305 x 305 x 97, ub 203 x 133 x 25, ub 356x 171 x51, ismc 150, ismc 200, isa 100 x 100 x 8, isa 75 x 75 x 8, isa 65 x 65 x 6

Central Government / Public Sector

CTN :39896870

25 Apr, 2025 NA

Begusarai - Bihar

Tender For corrigendum : supply of holder pn 17.1 , item340-5629929013-flange pn 11 , item350-5629929023-flange pn 11.1 , item360- 5629930018-complete cartridge,drg no-115459 , item370-5629930903-back up ring, pn-44, ss 316 , item380-5629930933-retaining ring, pn-54.2, ss 316 , item390-5629932103-hex.hd.bolts, pn-40.1, ss 304 , item400-5629935113-lock pin, pn-5.1, ss 316 , item410- 5629935403-set screw, pn-57, ss 316 , item420- 5629935413-set screw, pn-57.1, ss 316 , item430- 5629935423-set screw, pn-57.2, alloy steel , item440- 5629935553-cap screw, pn-40, ss 304 , item450- 5629936653-coil spring, pn-16, alloy c-276 , item460- 5629936663-coil spring, pn-16.1, alloy c-276 , item470- 5629936673-coil spring, pn-16.2, hast-c , item480- 5629937253-spring holder, pn-17, ss 316 , item490- 5629937263-spring holder, pn-17.1, ss 316 , item500- 5629937353-adapter, pn-172, ss 316 , item510- 5629939013-flange, pn-11, ss 316 , item520- 5629939023-flange, pn-11.1, ss 316 , item530- 5632910013-comp seal cart 1.750 pto, drg 2h-154824 , item540-5632910091-comp.unit,unxexn13743 , item550-5632910941-composite ring,unrh38r457u , item560-5632911101-gland ring,un154g175c31 , item570-5632911661-shaft packing,un562fhy47uu , item580-5632912421-throttle bush,uc9670cs4750 , item590-5632912731-collar,unet45porgf , item600- 5632913531-stationary face,uny5fq0m33 , item610- 5632913541-rotating face,unk43t750333 , item620- 5632915131-drive pin,unefj432vr473 , item630- 5632915401-set screw,unmkau8841413 , item640- 5632916021-stub sleeve,un98207ssm135 , item650- 5632916041-sleeve,un141twgc31,pn10 , item660- 5632916611-spring pin,unew56d44523h , item670- 5632916621-spring,unrhjrq5488i , item680- 5632917301-insert mounting,un 568330gu , item690- 5632970981-retaining ring,un 668828db , item700- 5632970991-retainer,un4n42708db , item710- 5632972241-flange bush,un 76370y3r2375 , item720- 5632972701-drive collar,un 833121db , item730- 5632973121-inner flange,un c0299880db-q1 , item740- 5632973501-st. face,un 23295k432375 , item750- 5632973511-st. face,un 23296k432375 , item760- 5632973521-rot. face,un 76368y3r2375 , item770- 5632973531-rot. face,un 76369y3r2375 , item780- 5632975421-cap screw,un 4n01752nd , item790- 5632975461-pumping screw,un c0134549db , item800- 5632976001-shaft sleeve,un 3r93430dbc31 , item810- 5632979021-outer flange,un 159649gge2125c31 , item820-5633971123-auxilary gland pn 8 , item830- 5633979013-flange, pn 11 , item840-5638802403-insert pn-2 silcar-1 , item850-5638803313-lockring pn-rr , item860-5638805103-rot face pn-15 , item870- 5638805403-seal ring pn-3 , item880-5638805413- sleeve pn-10 , item890-5644970208-complete cartridge 2.753,2h-152804 , item900-5650219001- flange,un101570gge3125c31 , item910-5650901163- 568227gu 2.125 viton o-ring , item920-5650901633- 568235gu 3.1253.00 viton rotface gkt , item930- 5650910913-mkax8840432 set screw a200 , item940- 5650912643-mvsr2250333 2.125 viton rot face gasket , item950-5650912693-mvsr2500333 2.252.1252.5 viton pkg , item960-5650913753-mvvr2875333 3.000 viton adapter gasket , item970-5650915723-sb100x515 2.7503.000 snap ring , item980-5650915733-sb105x515 bid details/ 2 / 79 2.8753.000 snap ring , item990-5669039001-lock pin 316ss,un4r55650db , item1000-5260510013- mech.seal,fsl,pt , item1010-5248142703-drive collar,5u4x,fsl,position no 58 , item1020- 5248145423-set screw,5u4x,fsl,position no 57 , item1030-5248145403-set screw,5u4x,fsl,position no57.1 , item1040-5248145413-set screw,5u4x,fsl,position no 57.2 , item1060- 5248146613-spring holder,5u4x,fsl,position no 17 , item1070-5248164103-seat gasket,fsl,5a9x5a9x , item1080-5248164113-rotary face gskt,fsl,5a9x5a9x , item1090-5248164123-seat gasket,fsl,5a9x5a9x , item1100-5248169043-gasket ,fsl,5a9x5a9x , item1110- 5248162363-flange bushing,fsl,5a9x5a9x , item1120- 5248165403-set screw,fsl,5a9x5a9x , item1130- 5248165423-set screw,fsl,5a9x5a9x , item1140- 5248165673-seal face,fsl,5a9x5a9x , item1150- 5248166613-coil spring,fsl,5a9x5a9x , item1160- 52481

CTN :39873313

21 Apr, 2025 NA

Leh - Jammu And Kashmir

Tender For bid to ras tender for supply of lv2/icvs2520003240(765-12-sb102or765-12-sb472)lining friction , tool kitcvd-f4734811de spanner 12x13 mm , lv6/mt1ia-010075bins steel portable , lv6/mt132540-008838chock stowage vehicular metallic (small) , lv6/mt709263m20556bearing

corporations/Associations/Others

CTN :40038369

24 Apr, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of cast steel items for various sugar factories of sugar corporation in uttar pradesh for the season 2025-26 - supply of new cast steel crown pinion(only casting) confirm to is:2708 grade-iii for mill size 33 x66 (as per drawing), supply of cast steel crown pinion ( only casting) confirm to is:2708 grade-iii for mill size 33 x66 (as per drawing) on conversion basis, machining charges of above casted crown pinion of mill size 33 x66 ., supply of new cast steel crown pinion(only casting) confirm to is:2708 grade-iii for mill size 40"x80"(as per drawing), supply of cast steel crown pinion ( only casting) confirm to is:2708 grade-iii for mill size 40"x80"(as per drawing) on conversion basis, machining charges of above casted crown pinion of mill size 40 x80 , supply of cast steel trash plate(only casting) confirm to is:1030 grade 280/520w for mill size 33 x66 (as per drawing), supply of cast steel trash plate(only casting) confirm to is:1030 grade 280/520w for mill size 33 x66 (as per drawing) on conversion basis., supply of cast steel trash plate(only casting) confirm to is:2708 grade iii mill size 33 x66 (as per drawing), supply of cast steel trash plate(only casting) confirm to is:2708 grade iii mill size 33 x66 (as per drawing)on conversion basis, machining and grooving charges of above casted trash plate of mill size 33 x66 ., supply of cast steel trash plate(only casting) confirm to is:1030 grade 280/520w for mill size 40"x80"(as per drawing), supply of cast steel trash plate(only casting) confirm to is:1030 grade 280/520w for mill size 40"x80"(as per drawing) on conversion basis., machining and grooving charges of above casted trash plate of mill size 40 x80 ., supply of cast steel trash plate beam(only casting) confirm to is:2708 grade-iii for mill size 33 x66 (as per drawing), supply of cast steel trash plate beam(only casting) confirm to is:2708 grade-iii for mill size 33 x66 (as per drawing) on conversion basis, supply of cast steel trash plate beam(only casting) confirm to is:1030 grade 280/520w for mill size 33 x66 (as per drawing), supply of cast steel trash plate beam(only casting) confirm to is:1030 grade 280/520w for mill size 33 x66 (as per drawing) on conversion basis, machining and grooving charges of above casted trash plate beam of mill size 33 x66 ., supply cast steel trash plate beam (only casting) confirm to is:2708 grade 280/520w for mill size 40"x80"(as per drawing), supply cast steel trash plate beam (only casting) confirm to is:2708 grade 280/520w for mill size 40"x80"(as per drawing) on conversion basis, machining and grooving charges of above casted trash plate beam of mill size 40 x80 ., supply of new cast steel scrapper (only casting) confirm to is:1030 grade 280/520w for mill size 33"x66"(as per drawing), supply of new cast steel scrapper (only casting) confirm to is:1030 grade 280/520w for mill size 33"x66"(as per drawing) on conversion basis, machining and grooving charges of above casted scrapper of mill size 33 x66 ., suppy of new cast steel scrapper (only casting) confirm to is:1030 grade 3 for mill size 40"x80"(as per drawing), suppy of new cast steel scrapper (only casting) confirm to is:1030 grade 3 for mill size 40"x80"(as per drawing), suppy of new cast steel scrapper (only casting) confirm to steel grade e 250a is:2062-2011 for mill size 40"x80"(as per drawing)40"x80"(as per drawing), suppy of new cast steel scrapper (only casting) confirm to steel grade e 250a is:2062-2011 for mill size 40"x80"(as per drawing) on conversion basis, machining and grooving charges of above casted scrapper of mill size 40 x80 .

Steel Item Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Co-operative

State Government

Central Government/Public Sector

Central Government / Public Sector

corporations/Associations/Others