Latest steel pin Tenders | Government steel pin Tenders

Central Government/Public Sector

CTN :40041771

02 May, 2025 NA

Murshidabad - West Bengal

Tender For tender for supply of rc feeder - back plate f2 cms a2 02729 , take up pulley assy rc feeder f2mtpcmsa , chain pin coc feeder ss304 10x100 , plain link for feeder coc steel , pin f2 cms a4 02329 rev , frnt and bck door gskt rc feeder f2mtpcmsa , cplg half grav feder f2mtpcmsa403464 and 1 , bearing cover f2 cms a3 02663 , wing link feeder coc f2 mtp cms a4 3345

Co-operative

CTN :39976748

22 Apr, 2025 NA

Najibabad - Uttar Pradesh

Tender For 3272/supply of cast steel items - cast steel coupling for mill size 33x66 new material is1030, cast steel coupling for mill size 33x66 new material is2708, cast steel coupling for mill size 33x66 conversion material is1030, cast steel coupling for mill size 33x66 conversion material is2708, cast steel coupling for mill size 33x66 machining charges, cast steel crown pinion for mill size 33x66 new material is1030, cast steel crown pinion for mill size 33x66 new material is2708, cast steel crown pinion for mill size 33x66 conversion material is1030, cast steel crown pinion for mill size 33x66 conversion material is2708, cast steel crown pinion for mill size 33x66 profile teeth cutting and machining charges, cast steel trash plate for mill size 33x66 new material is1030, cast steel trash plate for mill size 33x66 new material is2708, cast steel trash plate for mill size 33x66 conversion material is1030, cast steel trash plate for mill size 33x66 conversion material is2708, cast steel trash plate for mill size 33x66 with rough machining charges, forged steel trash plate new material is 1030, forged steel trash plate new material is 2708, forged steel trash plate conversion material is 1030, forged steel trash plate conversion material is 2708, forged steel trash plate rough machining charges, other casting i.e. trash beam bearing housing and tail bar etc new material is 1030, other casting i.e. trash beam bearing housing and tail bar etc new material is 2708, other casting i.e. trash beam bearing housing and tail bar etc conversion material is 1030, other casting i.e. trash beam bearing housing and tail bar etc conversion material is 2708, other casting i.e. trash beam bearing housing and tail bar etc with final machining charges, other casting i.e. trash beam bearing housing and tail bar etc with final machining charges with drilling and taping, cast steel pinion 33 teeth module 30 face width 500 pressure angle 20 no of teeth to spanned 4 span mot rtl 323 84 material cast steel is2644 grade cs 85 material hardness 220 bhn min as per free hand sketch with material and ultrasonic test report (on conversion basis) with final teeth cutting, final machining, final bore with key-way approx. weight 2500 to 3000 kg), cast steel crown pinion 22 teeth, outer diameter-290mm, pitch-41 mm (appprox) length of teeth-170 mm (approx wt-58 kg each) 01 nos. mat-is2708 (on conversion basis) with profile teeth cutting, machining charges., cast steel scrapper for mill no. 04 (discharge roller) as per drawing no. sneh20060506 material is1030 grade ii (approx wt-400 kg each) (on conversion basis) with machining charges, cast steel square bracket size 230 mm x 230 mm x 25 mm, bosh size od-160 mm, id-85 mm, length-75 mm, hole size-27 mm (approx wt 14 kg each) (on conversion basis), cs sprocket for bagasse carrier chain having pitch 150mm as per following specification- outer dia of sprocket-750mm, pitch-150mm, sprocket thickness-63mm, teeth thickness-35mm, bosh thickness-135mm, bosh od-236mm, bush id as per shaft size

Co-operative

CTN :40022918

21 Apr, 2025 3.00 Lacs

Kheri - Uttar Pradesh

Tender For supply of cost iron items for season 2025-26 - a. supply of cast iron scrapper, magma rotor, magma peddle and coupling etc with new casting, b. supply of cast iron scrapper, magma rotor, magma peddle and coupling etc on conversion basis., c. machining charges (if required), supply of boiler material on conversion basis composition is210 grade 25cr, 1.2 suitable to with stands 1000 degree c. temp., a. ci furnace grate bar, b. ci furnace grate bar jally, c. ci furnace grate bar holder, d. ci furnace nozzle, e.ci mouth piece, f. ci bag furnace chute, g. ci hanger, supply of ci v grove pully with new casting, supply of ci v grove pully on conversion basis., supply of ci bearing housing for magma mixer with new casting, supply of ci bearing housing for magma mixer on conversion basis, supply of ci duck foot bend upto size 12" on conversion basis, ms scrapper for under feed roller material is2060 (sail) pitch 70mm as per drg no. 10/6/04m grooving details as per drg no. 8/9/19, cast steel worm for crystallizer as per drg no. 90/08/17, cast steel gear 48 teeth for magma mixer as per drg no. 2k1/10/90, cast steel pinion 19 teeth as per drg no. 15/7/86b, cast steel pinion 19 teeth as per drg no. 15/7/86c, cast steel helical pinion 12 teeth as per drg material en-8, en-8 spidle with gear for super heater drain valve teeth 10 as per drg, ms fins for steam seprator for boiler furnace, cast steel sporket for mud mixture as per drg no. 05/06/09, ms sprocket as per drg no. 16/8/06d item no. a (95 teeth), ms sporcket as per drg no. 16/8/06d item no. b, cast irom worm wheel for 60 ton crystillizer od 1362mm x bore 150.6 mm x no. of teeth 72 as per drg. no. 17/8/13c, ci pulleysize od 380 mmwidth 70 mm03 nos. v groove as per drg. n o. 06/7/0r(drawing enclosed), ci pulleysize od 602 mmwidth 112 mm04 nos. v groove as per drg. n o. 07/8/07(drawing enclosed), cast steel worm for 60 ton crystallizer od 220mm as per drg no. 17/8/13c (b), hanger with nut for super heater coil of new boiler cap. 40 ton/hr pr. 45 kg./cm2 material ss-316l, cast steel driving sprocket 17 no. teeth 76.2mm pitch as per drg. no. 17/05/3m item no. 02, cast iron pulley for c-1 c/f machine od 260 dia , 08 no. v groove, b section belt as per drg. no. 19/08/14 c/f , dynamically balanced, c. i clamp for boiler no. 01 & 02 as per drg. no. r/89/07/36/90, c. i clamp for beam of boiler no. 01 & 02 (complete set with bolt & nut), (a) as per drg. no. 89/07/35a ( 01 of 02), (b) as per drg. no. 89/07/35a ( 02 of 02), c.i supporting hanger for furnace beam of boiler no. 01 as per drg., c.i furnace hanger of back side beam for boiler no. 01& 02 as per drg., c.i plate for boiler no. 03 as per drg. no. 18/92/7/rev., c.i supporting clit for furnace as per drg. l-30 nos., r-30 nos., c.i supporting plate of furnace beam for boiler no. 04 as per drg., c.i grade bar (stocker) for boiler no. 03 as per drg. no. 91/01/01 suitable for 600 degree c. temp., c.i supporting plate for window near supper heater coil of boiler no. 03 size length - 760mm x width 500 mm x thick 25 mm, c.i tunion bar for new boiler as per drg. no. 2k1/09/83, c.i attachment of tunion of boiler no. 4& 5 as per drg. , cost steel worm no. of teeth 04, pitch 64, bore 80mm, od 220 dia, width 250mm as per drg. no. 90/08/17, supply of cast steel tape wedge block for mill as per mill drawing suitable for 5000 tcd plant, burning loss @ % on conversion basis item only

CTN :40022675

01 May, 2025 NA

Baghpat - Uttar Pradesh

Tender For supply of machinery parts as per drawing year 2025-26 - m.s. roller for mud conveyor as per drg. 1268/r-2 dated 22.06.09) od 100mmxlength 225mm, od 90mm.xlength 200mm, od75mm.x length 630mm, od 100mm x length 740mm, c.s. trash beam bottom bracket as per drawing no. b/2008/c-1357 dated 09.07.08 conversion basis, g.r. pressure feeder nose plates scrappers to be mfg. as per drawing no. b/94/c-1087/r-2 dated 05.06.09, g.r. pressure feeder nose plates scrappers to be mfg. as per drawing no. b/94/c-1087/r-2 dated 05.06.09, on conversion basis., cast steel swing arm left hand/right hand (gear side) all over machined as per drawing no. b/2002/c-1265/r-2 dated: 22.4.2009, en-19 forged steel spur gear pinion having machine cut teeth for cane unloader, as per drawing no. b/2001/c-1256/r-1, 33 teeth., en-19, forged steel spur gear pinion having machine cut teeth for cane unloader, as per drawing no. b/2001/c-1256/r-1, 68 teeth., c.s.bearing housing with fitted 02 nos. locking camp. plate for roller shaft for mill (all over machined) to be manufactured as per drawing no. b/93/c-1011/r-2 dated: 13-06-2009 material cast steel is: 1030 grade 27-54, dismentling of chopper tubs and replacement of worn out hubs by new hubs, fitting and balancing as per drg. no. b/05/c-1129/r-1, replacement of bronze linner of mill hydralic cap, machining, buffering, fitting & testing., c.s.sprocket on conversion basis as per drg. no. b/94/c-1056, maching of transmission gear shaft from old shaft as per drg. no. b/2001/c-1258/r-1(material-cl-4, is-2004), c.s double sprocket 76 teeth for welding & machining with teeth cutting, c.s double sprocket 25 teeth for welding & machining with teeth cutting, pinion 38 teeth of new main bagasse carrier chain, pinion 25 teeth of new return bagasse carrier chain, pinion 52 teeth of old main bagasse carrier chain, pinion 25 teeth of old main bagasse carrier chain, worm & worm wheel for crystlizer as per drg. no. b/73/c-310, worm as per drg. no. b/75/c310, en-9 forged steel pin for mill a frame as per drg. no. b/2010/c-1377 dated: 12.06.2010. (2 section per pin), c.s. gr 26/52 is-1030 machined knife holder hub for cane leveler as per drg. no. b/2007/c-1337/r-1 dt. 17.07.2022 (without key), repair of links hole of block type chain, c.i. idler for cane carrier as per drg. b/2007/c-1340 on conversion basis with machining, repair of pinion teeth-38 of bagasse elevator, c.s. sprocket wheel 14 teeth for cane carrier head shaft maics-26/52, is 1030 as drg. no. b/94/c-1041/r2 dt. 20.06.2007, en-24 helical pinion with shaft no. of teeth-19, od-90mm, root dia-72mm,teeth face wide-180mm, total pinion shaft length-490mm as per sample, leaf spring supporting frame for grader as per drg. no. b/2022/c-1530. type-1 (spring steel flat size 75 x 8mm), en-9 steel shaft for mill house crane as per drg. no. b/2020/c-1571, mark-1, repair of chain block 02 ton cap., repair of chain block 01 ton cap., repair of chain block 05 ton cap., repair of chain block 03 ton cap., en-9 forged steel pin for mill a frame as per drg. no. b/2010/c-1377 dt. 12.06.2010 (2 section per pin), metalon/teflon ptef bush for rotary screen as per drg. no. b/2024/c-1562 dt. 04.07.2024, brass seat for juice heater double beat valve size 8 as per drg. no. b/2024/c-1564 dt. 14.07.2024

CTN :40037797

25 Apr, 2025 NA

Multi City - Multi State

Tender For supply of set of manganese steel pins of wag7 locos comprising of-- (i) hanger lever pin to clw's drg. no.-06/4/19/22 (alt.-2)=8 nos. (ii) hanger pin to clw's drg. no.- 03/4/19/22 (alt.-4)=16 nos. (material to spec.-irs-r 65-78).

CTN :39964616

30 Apr, 2025 NA

Uttara Kannada - Karnataka

Tender For tender for supply of lateral pusher supply unit , tilting hoisting unit , limit switch assembly with zcke65 head , sertec washer d5 ss , sertec washer d6 , o-ring 18x2.65 20a8 , o-ring 53x2.65 20a8 , steering device , friction washer 40x30x1 , valve box , axis , spring , axis , spacer bush , spacer bush , grooved bush , lock plate , spacer bush , lip seal , sealed valve isolating ring , o-ring 21 , 30 x 3 , 60 20a8 gn , bs packing b12 20a8 , ring bp25 bronze , washer z12 e36 steel , lock tab washer nd16 x6crniti18-10 , v3.2-32 pin e36 steel , pin v5-45 steel , 3-15 thick spring pin xc80 steel , 3x20-a elastic spring pin steel xc90 , screw hc m5-15 with tapered end class 4-8 steel , cylindrical pin 5x15 stainless steel , spring pin 18x50 steel xc90 , bs ring c20 , lock tab washer nd12 x6crniti18-10 , lock tab washer nd6 x6crniti18-10 , o-ring 24.6x3.6 20a8 , o-ring 5.6x1.8 20 a8 , seal 22.5x34x3 copper , washer z8 steel , pin v2-40 steel , spring pin e8-30 steel xc90 , m4 dec washer , pilot non-return valve , gasket 20x10x2 , lock washer 95x58x1.5 , lockwasher steel , rotating actuator , ruch sealing ring od10.2 , cribo spring washer steel , seal washer 20x32x1 , cotter pin 2x18 , cotter pin 3.2 x25 , pin v3.2-32 , cotter pin 4x25 copper , pin , v4-40 stainless steel , split pin v 5-56 copper , thick spring pin 4x30 , thick spring pin 5x15 , lips seal (average dia. 845) , lips seal (average dia. 667) , friction washer , spring , lock plate , seal , friction washer , spring , lock washer , tongue spring , lip seal (average dia. 862) , o-ring 32.5x3.55 , round head parallel key 8x7x25 , lock plate , bush , lip seal (average dia. 445) , porthole , lip seal (average dia. 662) , friction washer , pin cylindrical 4 - l 28 , lip seal (average dia. 762) , cotter pin 2.5x25 , thick spring pin 5x12 , thick spring pin 5x12 , thick spring pin 7x20 , tooth lock washer de 2 stainless steel cd , pin spring , friction washer , lever release spring , shouldered ring rod tlt n.2 , o-ring 16.9x2.7 20a8 , hydrauxim valve od 10.2 , snap ring , flanged bearing bush c32 40x32 , tapered roller bearing 32307 , locking screw , pin , seal , locating pin , removable pin , bearing bush , removable pin , washer bp25 , plain washer12x19 th.1.5 , plain washer 8x16 th.15 , fitted bolt m30 class 12.9 , shouldered bush 6.5x11x7 , plain bearing , lock washer - nylon , plain bearing , o-ring 26.5x2.65 , o-ring 90x3.55 20a8 , o-ring 265x7 20a8 , o-ring 400x7 20a8 , nl washer nd36 steel , shouldered bush 12x16x11.5 , o-ring 106x3.55 20a8 , steel safety washer type n.l m30 , o-ring 2.62x59.99x65.23 , seal and seat assembly , lip seal type a 30x40x7 , safety wire dia 1 l900mm , seal , self-lubricating ring , support ring cp 3-40-60 , self-lubricating ring , flanged bearing bush c40-46x25 , support ring cp 3-35-52 , back-plate , drawn cup needle roller bearing , washer dic 10 , washer dic 4 , washer dec 6 stainless steel , washer dic 6 stainless steel , washer dic m8 , o-ring , needle roller bearing na4906 , nord lock washer m16 , radial roller bearing nu 1016 m , nut h m30 class 12 , ball bearing , o-ring 28.24x2.62 20a8 , stud rod m36 x 240 , nut h m36 stainless steel , v ring seal v8a , o-ring 290x3 , o-ring 291.47x6.99 20a8 , tapered roller bearing 80x125x29 , screw fs m2.5-8-8 , spring-type straight pin e4-60 (cut to l-45mm) , spring pin e 5x40 , washer dec 3 , washer dec 5 steel , washer dec6 galvanized steel , ring im 30-35-20 p , ring im 35-40-20.4 , preformed gasket , grease nipple lub g83 8 , spring-type straight pin e8-60 (cut to 40) , combined bearing rax440 , combined bearing rax435 , lip seal type a 35x50x7 , screw h m30 150/150 class 12.9 , v ring seal v75a , heating element 540w (plate 385mm) , heating element 960w (plate 385mm) , heating element 1290w (plate 385mm) , copper seal 27 , 3x32x1 , 5 , lock tab washer , serrated lock washer external teeth 8 , copper seal 14x18 , 5x1 , 5 , serrated lock washer external teeth 12 , o-ring 34 , 6x2 , 4x39 , 4 ,

CTN :39950461

22 Apr, 2025 NA

Multi City - Multi State

Tender For supply of set of mn steel pins and bushes (per loco) for wap4 locomotives as per irs-r 65/78 comprising of:- (a)set of pins comprising of (i) pin for brake hanger lever as per clw's drg. no. 03/4/19/114 alt-3 = 08 nos. (ii) pin for brake head hanger as per clw's drg. no. 03/4/19/75 alt-4 = 24 nos. (iii) pin for brake head hanger as per clw's drg. no. 03/4/19/76 alt-4 = 04 nos. (iv) pin for air brake cylinder lever as per clw's drg. no.03/4/19/77 alt-4 = 12 nos. (v) pin for push rod as per clw's drg. no. 03/4/19/78 alt-4 = 12 nos. (vi)pin for clevis as per clw's drg. no. 03/4/19/115 = 24 nos (b) set of bushes comprising of (i) bush (41od x32id x25 length) as per clw's drg no. 03/4/19/33 alt-4 = 24 nos (ii) bush (38od x28id x22 length) as per clw's drg no. 03/4/19/68 alt-4 = 12 nos (iii)bush (41od x32id x32 length) as per clw's drg no. 03/4/19/35alt-4 = 16 nos (iv)bush (41od x32id x22 length) as per clw's drg no. 03/4/19/30 alt-4 =32 nos (v) bush (45odx35id x32 length) as per clw's drg no. 03/4/19/34 alt-4 = 24 nos (vi)bush (41od x32id x16 length) as per clw's drg no. 03/4/19/43 alt-4 = 24nos (vii)bush (52od x42id x16 length) as per clw's drg no. 03/4/19/52 alt-5 = 72 nos(viii)bush (41od x3 2id x20 length) as per clw's drg no. 03/4/19/27 alt-4 = 48 nos (ix)bush (41od x32id x15.5 length) as per clw's drg no. 03/4/19/117 alt-1= 48nos (all test including optional test as mentioned in rdso's spec. no. irs:r65-78 are to be carried out during routine test).

Central Government/Public Sector

CTN :39949005

24 Apr, 2025 NA

Multi City - Multi State

Tender For supply of set of mn steel pins and bushes for wap 4 locos

Central Government/Public Sector

CTN :39857772

22 Apr, 2025 9.02 Lacs

Jaduguda - Jharkhand

Tender For supply of pinion 25 teeth for rod mill, size: 9' dia x 16' long moc: en24, forged & heat treated steel , pinion 19 teeth for rod mill, size: 8' dia x 12' long moc: en24, forged & heat treated steel , pinion 31 teeth for rod mill, size: 9' dia x 16' long moc: en24, forged & heat treated steel

CTN :39549692

07 May, 2025 NA

Multi City - Multi State

Tender For supply of set of manganese steel pins of wag7 locos comprising of ---(i) hanger lever pin to clw's drg. no.-06/4/19/22 (alt.-2) = 8 nos. (ii) hanger pin to clw's drg. no.-03/4/19/22 ( alt.-4) = 16 nos. (material to spec.-irs-r 65-78). [ warranty period: 30 months after the date of delivery ]

Steel Pin Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Co-operative

Co-operative

Central Government/Public Sector

Central Government/Public Sector