Latest steel pipe laying Tenders | Government steel pipe laying Tenders

State Government

CTN :40183142

31 Jul, 2025 14.56 Lacs

Malda - West Bengal

Tender For corrigendum : design, supplying. fabrication, erection an commissioning including 3 (three) months trial run of 25m3/hr. capacity pressure type iron elimination plant and backwash water disposal at head work site and laying of dedicated/parallel pipe line

Central Government/Public Sector

CTN :40743544

16 Jul, 2025 71.34 Lacs

Bathinda - Punjab

Tender For corrigendum : annual rate contract of instrument maintenance jobs for the year 2025-26 - removing of level gauges, fixing of level gauges, transportation of level gauges, removing of level switches, fixing of level switches, removing of leveltrols, fixing of leveltrols, transportation of leveltrols, removal of differential pressure/ pressure transmitter with or without capillary with flange size upto 80mm and upto 600# rating, diaphragm seal type transmitter, ordinary transmitter, fixing of differential pressure/ pressure transmitter with or without capillary, diaphragm seal type transmitter, ordinary transmitter, fixing of differential pressure/ pressure transmitter with or without capillary, diaphragm seal type transmitter, ordinary transmitter, removal of diaphragm seal type pressure/d.p gauges with flange size upto 80mm and upto 600# rating, fixing of diaphragm seal type pressure gauges with flange size upto 80mm and upto 600# rating, transportation of diaphragm seal type pressure gauges / ordinary pressure gauges, removal of pressure switch, installaltion of pressure switch, removal of glass tube type rotameter, removal of magnetic type rotameter, fixing of glass tube type rotameter, fixing of magnetic type rotameter, transportation of rotameters (any type), removal of different type of flow meters, upto and including 4" size irrespective of pr. rating, above 4" size irrespective of pr. rating, fixing of different type of flow meters, upto and including 4" size irrespective of pr. rating, above 4" size irrespective of pr. rating, transportation of different types of flowmeters irrespective of size & pr rating, removal of orifice plate from flange assembly, upto & including 6" line size (of any rating) ., more than 6" line size (of any rating), fixing of orifice plate at flange assemply, upto & including 6" line size (of any rating) ., more than 6" line size (of any rating), removal of power cylinders, size upto 4" dia, size > 4" dia, mounting of power cylinders., size upto 4" dia, size > 4" dia, transportation of power cylinders, shifting of empty or filled calibration gas cylinders, removal of thermowells alongwith thermocouple, removal of thermocouple without thermowells, fixing of thermowells alongwith thermocouple, fixing of thermocouple without thermowell, removal of weep hole probes of urea reactor, fixing of weep hole probes of urea reactor, laying of tubing., size 6/8mm of copper or ss tube, size 10/12mm of copper or ss tube, removal of tubing, size 6/8mm of copper or ss tube, size 10/12mm of copper or ss tube, laying of gi pipe., upto size 1/2", > 1/2" , upto size 1", > 1" , upto size 2", > 2" , upto size 4", fabriction & laying of impulse lines/air header etc. of following sizes of pipes (non ibr) including welding upto sch 40, upto & including 1/2" carbon steel, upto & including 1/2" stainless steel/alloy steel, > 1/2" upto & including size 1" carbon steel, > 1/2" upto & including size 1" stainless steel/alloy steel, > 1" upto & including size 2" carbon steel, > 1" upto & including size 2" stainless steel/alloy steel, > 2" upto and including size 4" stainless steel/alloy steel, fabriction & laying of impulse lines/air header etc. of following sizes of pipes (non ibr) including welding more than sch 40, upto & including 1/2" carbon steel, upto & including 1/2" stainless steel/alloy steel, > 1/2" upto & including size 1" carbon steel, > 1/2" upto & including size 1" stainless steel/alloy steel, > 1" upto & including size 2" carbon steel, > 1" upto & including size 2" stainless steel/alloy steel, fabriction & laying of impulse lines/air header etc. of upto & including 1/2" carbon steel of pipes (ibr) more than sch 40, removal of impulse line/air header of ibr/non-ibr (for all ratings), size upto & including 1/2" of carbon steel/gi, size > 1/2" upto & including 1" of carbon steel/gi, size > 1" upto & including 2" of carbon steel

State Government

CTN :40127210

12 Jul, 2025 59.82 Lacs

Malda - West Bengal

Tender For corrigendum : laying of dedicated pipe line for improvement of functionality and design, supplying. fabrication, erection commissioning including 3 (three) months trial run of 135m3 hr. capacity pressure type iron elimination plant with backwash water disp

corporations/Associations/Others

CTN :40959145

12 Jul, 2025 2.98 Lacs

Kolkata - West Bengal

Tender For supply and installation of 300 mm diameter actuator operated butterfly valve, pressure gauge and repairing of short piece and laying of drainage line for pump gland water upto sump at daspara bps

State Government

CTN :40955361

19 Jul, 2025 39.45 Lacs

Delhi - Delhi

Tender For improvement of water pressure / supply in vijay park and adjoining area by laying a new water pipe line from noor - e -ilahi road to durga gali vijay park in ac -67

State Government

CTN :40939435

15 Jul, 2025 4.89 Lacs

Jummu - Jammu And Kashmir

Tender For as per boq - drilling of gravel packed bore hole of 250mm diameter and lowering of liner assembly consisting of blind and strainer pipes of 125mm dia. upto 90 mtr by using direct/ rotary / dual rotary method including installation of mark-ii hand pump and construction of platform as per unicef norms / as per site conditions, providing of 125 mm dia. m.s. casing pipe. the 125mm dia. m.s. casing pipe isi marked should have thickness of 5.4mm conforming to as per is 4270 / 2001 medium class (part-i) 2004 (heavy c class) electric resistance welded beveled ended inside beed free pipes. all pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. there should be no circumferential weld. the pipe from inside should be beed free having smooth finish. each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with is 4270/2001 with latest amendments. all the physical and chemical properties of pipe including tensile strength should be in accordance with is 4270/2001 with latest amendments., providing of pea shaped gravel as per is-4097 of 1967 with latest amendments for gravel packing of hand pump, shrouding during lowering of liner assembly, cost of slotting of ms pipe 125 mm dia ( to be charged as per actual), development of bore hole by air compressor of adequate capacity to give clear water free from sand and impurities, providing, fitting, installation, testing and commissioning of submersible pump set (reputed make) of suitable parameters depending upon the depth and discharge of the bore hole. the job includes erection of tripod stand and fixing of chain pulley block. then lowering of submersible pump set in to the bore hole by way of providing and lowering of 32 mm dia. hdpe pipe, submersible cable with fixtures such as rope, clamp, nuts, bolts & washers. fabrication and fitting of well cap. providing, fitting and installation of single-phase starter cum controller panel in sheet enclosure outdoor type conforming to is standard. providing and laying of 3 core submersible cable and 2-core pvc insulated copper conductor of suitable capacity as service line required from lt pole to starter panel of reputed make and fixing of lt control panel on wall by using wall mount fastners. making of electrical connections with the starter panel, service line and submersible pump set after properly thimbling and testing and commissioning thereof. the job includes the cost of material and labour charges. complete job.

State Government

CTN :40901606

14 Jul, 2025 9.78 Lacs

Diu - Daman And Diu

Tender For providing erecting and fixing of electric pole accessories from check post main road to say site bucharwada panchayat area diu - supplying and erecting led street light fittings with high power white leds wattage of 3 watt and above assembled on single mcpcb, efficiency more than 130 lm/w and corrosion free high pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and polycarbonate optics/ lenses, with toughened glass with company mark/ name engraved or embossed 160 to 270v, power factor more than 0.95, thd 10%, cct 3000k to 5700k,uniformity ratio >0.45, luminaire efficacy> 100 lumens/ watt. led driver efficiency > 85%. (fittings required lm-79 & lm-80 certificates) (note: below description have shown ranges of wattage capacity of led fittings. the engineer in charge may select any wattage capacity between the ranges shown.) (a) street light (ip-65), surge protection- 4kv integral and, light must have 440vac line supply with over-voltage protection. 90 watts cat. ii (make: wipro, crompton, philips, bajaj, osram) as directed by the engineer-in-charge., providing and erecting street light pole bracket comprising main b class gi pipe of 4.2 cm/ require outside dia. complete with suitable b class g.i sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete painted with one coat of red oxide / pu base primer and two coats of aluminium / pu paint. paint with following nos of arms. single arm bracket 1 mtr, providing and erecting xlpe (is:7098) (i)-88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (a) 4 core 16 sq. mm, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed 1.50 sq.mm 3 core round pvc sheathed., providing and erecting pipe type earthing having 150 cms. long and 2.5 cms. dia. galvanised iron pipe with coupling and buch buried in specially prepared earth pit complete with necessary 8 swg earth wire., supplying & erecting earth pit of minimum bore dia. 150mm size approved make earthing electrode consisting pipe-in-pipe technology as per is 3043-1987 made of corrosion free hot dipped g.i. pipes having outer pipe dia of 50mm having 80-200 micron galvanising, inner pipe dia of 25 mm having 200-250 micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover. (approved make oem has to submit test certificate) & having back filling compound of (b) inner chemical (ccm compound)- resistivity:- 0.2 / meter testing as per iec 62561-2017, voltage drop:- 1 volt at no load & dry form, sulphar content:- 2%(c) back fill compound :- earthing compound should be capable to retain moisture for long time necessary test report must be submitted. (b) for electrical installation up to 11kv in normal soil length of pipe - 2.00 mtrs back filling compound - 1 nos bag of 25 kg., making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface as normal ground., making trench in hard murrum / tar road of suitable width of 90 cm or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground., providing & laying approved make isi marked hdpe 6kg / cm2 (class-3) as per is:4984:1995 pe-80 to be erected at road crossing on or floor as directed for laying of cable. the pipes as follow

State Government

CTN :40896526

19 Jul, 2025 26.20 Lacs

Purulia - West Bengal

Tender For balance work for supplying laying fitting fixing of hdpe pipe line from kolaboni zone -ii ohr site doulatpur public school to saldiga village , belabhal village , bahukata village ladurka padarpara to simlapara village for increase pressure of

Steel Pipe Laying Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors