Latest steel profile Tenders | Government steel profile Tenders

CTN :41545681

25 Aug, 2025 1.37 Lacs

Jammu - Jammu And Kashmir

Tender For supply of steel roofing through sheet or srt (steel profiles) as per is 1079

CTN :41465818

30 Aug, 2025 16.60 Lacs

Baramulla - Jammu And Kashmir

Tender For corrigendum : supply and construction of a ane tower concrete of 8.4 mtr 7 7 0 7 height made of rcc framed structure and bullet proof rcc cabin with internal dimension of 2.8m x 2.8m x 2.7m height , structural stay in place double panel of size 2.5mx 1.1m , structural stay in place single panel 2.5m x 0.45m , bullet proof glass of size 600mm x 300mm 45mm thick , rapidite quick setting compound 01 ltrs per beg of cement. , heavy duty ceramic industrial floor tiles of size not exc 0.42 sqm of dark light shade 10 15mm thicksquare rectangular , white cement , chalk whitining for white wash , aggregate 20mm. , aggregate 40mm. , natural sand , oild bound distemper , exterier emulsion paint , ms tmt bars 16mm dia conforming to is 1786 1985. , ms tmt bars 12mm dia conforming to is 1786 1985. , ms tmt bars 10mm dia conforming to is 1786 1985. , ms tmt bars 8mm dia conforming to is 1786 1985. , ms binding wirenot less than 0.9mm dia , 12mm thick plywood 2.4m x 1.2m for formwork total area 54.32 sqm , wood scantling 50x 75mm size 2100mm long of 2nd class hard wood. , nails 4 inch , 50mm ms prop jacks for slab shuttering , synthatic camouflague net visual tie knot jungle and desert pattern weight aporox 12 gm per sq feet , pre fabricated steel loop holes cover of size 0.30m x 0.30m made out of 12mm thick ms sheet with isa 40x40x6mm thick frame work on four side , aerolite calcium silicate spintone false ceiling board 15 mm 600 x 600 mm , 6mm gi wire for fixing ceiling panel board , false ceiling heavy duty t grid hot rolled plain white of size 24 x 38 x 0.30 mm , false ceiling angle 25x25x3mm l shaped 5mm thick , pre fabricated steel door of size 0.90m x 1.80m made out of 2mm thick , ismb 150 for roof rafter depth of beam 150mm and width of flange 75mm 8mm thick , ismc 75 x 40mm as in purlin , top normal bolt of size 12 mm dia 100mm long as per calculation details , 0.60 mm thick pattern colour coated steel profile sheets. , 0.60 mm thick colour coated plain steel sheet of size 3048mmx600mm , self tapping screw 3 inch long , shs 80mm x80mm as in vertical post 6mm thick , side inclined member ismc 200 , 50mm dia medium grade 3.65mm thick round pipe 0.9m ht as in vertical post as baluster , 5mm thick plates chequered , equal angle 50 x 50 x 5mm for steps , synthetic enamel paint black , 4 nos x 16mm dia 100mm long foundation bolt with nut and 2 nos x 3mm thick steel washer , nut bolt 12mm dia 60mm long wth 3mm thick two steel washers , pvc cover for railing , pvc ceiling rose 2 3 terminal with pvc square box complete with screws , 22 w square natural white 300 x 300 x 25 mm led panel light , led tube light fitting 1 x 18w 4 feet long complete with all accessories including led tube rod. , xlpe insulated pvc seathed heavy duty armoured multi core cable 16 sqmm 2 core , cable pvc insulated unsheathed single core flexible copper conductor 1100v grade of size 1.5 sqmm. , cable pvc insulated, unsheathed single core flexible copper conductor 1100v grade of size 2.5 sqmm c , modular switch one way 6 amps one , ms screw 20 mm per pkt 100 nos , ms screw 35 mm per pkt 100 nos , insulation tape 2 cm width 10 mtr long , mcb single pole 230v ac 50 hz 6 amps, 10ka , mcb single pole 230v ac 50 hz 16 amps, 10ka , mcb distribution boards in sheet metal enclosure 8 ways double door with blanks confirming to is 8623. , modular switch one way 16 amp 1 module. , modular socket 6a 2 3 pin combined 2 module. , modular socket 16a 2 3 pin combined 2 module. , white cover plate with frame 3 module. , metal flush box 3 module , pvc casing caping pipe 25mmx16mm , pvc casing caping l bend 25mm , pvc casing caping t 25mm for conduit pipe , rigid pvc conduit pipe dia 25 mm medium grade , pvc casing caping elbow 25mm dia , pvc casing caping square box 4 inch x 4 inch

CTN :41298980

25 Aug, 2025 NA

Kangra - Himachal Pradesh

Tender For bid to ras supply of steel roofing through sheet or srt (steel profiles) as per is 1079 (q3)

Central Government/Public Sector

CTN :41505011

11 Sep, 2025 99.99 Lacs

Jammu - Jammu And Kashmir

Tender For supply of steel roofing through sheet or srt (steel profiles) as per is 1079 (q3)

Central Government And Public Sector

CTN :41504357

01 Sep, 2025 NA

Nagpur - Maharashtra

Tender For supply of steel roofing through sheet or srt (steel profiles) as per is 1079 (q3)

CTN :41503027

04 Sep, 2025 NA

Bandhavgarh - Madhya Pradesh

Tender For supply of steel roofing through sheet or srt (steel profiles) as per is 1079 , strip , ms square pipe 3* 3 , ms square pipe 2* 2 , metal angle , profile sheet

Central Government/Public Sector

CTN :41381856

25 Aug, 2025 11.00 Crore

Ernakulam - Kerala

Tender For custom bid for services - habitability package for jur sagar kiran; 1 5.1 wooden panel flooring, 2 5.1.1, 1)supply &replacement of wooden panel flooring for jr. & sr., recreation room, executive room, auditorium, t/p room, radio room,, control room, engg. office & t/p office.specification: wooden plank (2 m, x 305 mm x 75 mm thk), type of wood: balau timber, sq.ft. 2600, 3 5.2 flooring, 4, 5.2.1, 1)supply &replacement of vinyl flooring for a,b,c,o decks,including, messes and staircase with teak wood running skirting 150mm width,6mm, thick on all room walls,stair cases,offices,control rooms and scr room., specification:thickness of 2mm or more,fire resistant,non slippery,, washable,wooden finish., 2)quantity is indicative and will be finally calculated based on the, damages assessed at the time of dry dock., 3)as a turnkey job, bidder to carryout all associated job including renewal, of damaged deck composotion., make:armstrong/hanwa/flora or as approved by ongc., sq.ft. 15000, 5, 4) material to be approved by ongc., 5) primary deck covering should be of approved material which will not, give rise to toxic or explosive hazards elevated temperatures*. (refer to, imo res. a.687(17) - fire test procedures for ignitability of primary deck, coverings), 6 5.3 lining panels 'c' class, 7 5.3.1, 1) supply & replacement of abs approved (solas) lining panels (12, mm thick) for a, b, c, 0, decks, including canteen and staircase, 2) job includes supply of all supports, galvanised steel profile with metal, inserts, frames, anchors, clamps, fasteners, glasswool insulation,, washers, mesh, retailer clips, cloth pops etc. as per the existing system., 3) make: marino/royal touch/century/greenlam/royal challenge/sundex, or as aproved by ongc., 4). material to get approval from ongc., sq.ft. 15000, 8 5.3.1, glass wool insulation should be of 4 inches thickness (high density, block), fire resistant and suitable for accommodation ceilings of drilling, rigs., sq.ft. 15000, 9 6.75 remove & refit of sensors & bell router of fire alarm system from ceiling, panels of a,b,c,o decks of accomodation area nos 220, 10 6.61 remove & refit of paga system from ceiling panel of of a,b,c,o decks of, accomodation area nos 140, 11 5.4 partition / lining panels 'b' class, 12 5.4.1, 1) supply & replacement of abs approved partition / lining panels (22, mm.) at various locations of accommodation, 2) job includes supply of all supports, galvanised steel profile with metal, inserts, frames, anchors, clamps, fasteners, glasswool insulation,, washers, mesh, retailer clips, cloth pops etc. as per the existing system. ., 3) make: marino/royal touch/century/greenlam/royal challenge/sundex, or as aproved by ongc. 4). material to get approval from ongc., sq.ft. 15000, 13 5.4.1 glass wool insulation should be of 4 inches thickness high density block,, fire resistant and suitable for offshore drilling rigs. sq.ft. 15000, 14 5.5 shoe racks, 15 5.5.1, 1) supply of ready made shoe racks to be made in both 'a', and 'b', decks at exit points on port & starboard sides as per following:, a) shoe rack for 'b' deck: size 4' x 1-1/2' x 1-1/2', b) shoe rack for ''a' deck: size 6' x 1-1/2' x 1-1/2'., 2) makes: 1.guatier, 2. durian, 3. concepts, mumbai, 4. godrej or as, approved by ongc., set 2, 16 5.6 new flooring at freezer room & cooler room, 17, 5.6.1, 1) to provide new flooring for freezer room and cooler room with, thermal insulation to avoid heat loss including supply of materials as per, details given below:, a) room volume - 22.4 m3,, b) ceiling area - 12.4 m2, temp. -20c,, c) floor area - 12.4 m2,, d) sidewalls - 13 m2 x 12.8 m2 x10.7 m2x12.5 m2., e) rubber mats - 12 mm thick synthetic rubber, 2) supply and fixing of anti-skid floor tiles in both the rooms., (makes nitco, johnson, spartek, sonora, kajaria), 3) supply and fixing of thermal insulation including materials for all side, walls and ceilings of both the rooms as per drg. no. 770/

CTN :41376011

11 Aug, 2025 2.00 Lacs

Ganderbal - Jammu And Kashmir

Tender For supply of steel roofing through sheet or srt (steel profiles) as per is 1079 (q3)

CTN :41186672

12 Aug, 2025 NA

Baramulla - Jammu And Kashmir

Tender For supply of steel roofing through sheet or srt (steel profiles) as per is 1079

State Government

CTN :41166733

19 Aug, 2025 NA

Mumbai - Maharashtra

Tender For tender for plastic and reconstruction items-maxilla plate regular 20 holes straight, thickness range 0.6mm to 0.8mm, screw diameter 1.5mm pure titanium 100%ti, profile 1.5mmmaxilla plate regular 5 holes right l shaped, thickness range 0.6mm to 0.8mm, screw diameter 1.5mm pure titanium 100%ti, profile 1.5mmmaxilla plate regular 5 holes left l shaped, thickness range 0.6mm to 0.8mm, screw diameter 1.5mm pure titanium 100%ti, profile 1.5mmmaxilla microplates, thickness range 0.5mm to 0.8mm, screw diameter 1.5mm to 2mm, pure titanium 100%timandible plate regular 20 holes straight, thickness range 1.3mm to 1.5mm, screw diameter 2mm pure titanium 100%ti, profile 2mmmandible plate regular 20 holes straight, thickness 1.0mm, screw diameter 2mm pure titanium 100%ti, profile 2mmmandible plate 04 holes with gap, thickness range 1mm to 1.25mm, screw diameter 2mm pure titanium 100%ti, profile 2mmrecon plate (19 to 24) holes range on straight segment + (06 to 07 holes on ramus segment plate, right with thickness 2mm screw diameter 2.2mm to 2.4mm, pure titanium 100%ti, profile 2.4mmrecon plate (19 to 24) holes range on straight segment + (06 to 07) holes on ramus segment plate, left with thickness 2mm screw diameter 2.2mm to 2.4mm, pure titanium 100%ti profile 2.4mmrecon 20 holes plate straight thickness 2mm, screw diameter 2.2mm to 2.4mm pure titanium 100%ti profile 2.4mmrecon (19 to 24) holes range on straight segment + (06 to 07 holes on ramus segment plate, right with thickness 2.5mm screw diameter 2.2mm to 2.4mm pure titanium 100%ti profile 2.4mmrecon (19 to 24) holes range on straight segment + (06 to 07 holes on ramus segment plate, left with thickness 2.5mm screw diameter 2.2mm to 2.4mm pure titanium 100%ti profile 2.4mmmmf screw self drilling screw diameter 2mm length 8mm,12mm stainless steel profile 2mmmaxilla self tapping screw with 1.5mm diameter and 5mm length with 100% pure titaniummaxilla self tapping screw with 1.8mm diameter and 5mm length with 100% pure titaniummaxilla self tapping screw with 1.5mm diameter and 6mm to 8mm length with 100% pure titaniummaxilla self tapping screw with 1.8mm diameter and 6mm to 8mm length with 100% pure titaniummandible self tapping screw with 2mm diameter and 6mm to 8mm length with 100% pure titaniummandible self tapping screw with 2mm diameter and 9mm to 11mm length with 100% pure titaniumrecon self tapping screw with 2.2mm to 2.4mm diameter and 8mm to 10mm length with 100% pure titaniumrecon self tapping screw with 2.2mm to 2.4mm diameter and 9mm to 11mm length with 100% pure titaniumrecon self tapping screw with 2.7mm to 2.9mm diameter and 10mm length with 100% pure titanium

Steel Profile Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

State Government