Latest steel sheet Tenders | Government steel sheet Tenders

Central Government/Public Sector

CTN :40106129

16 May, 2025 NA

Multi City - Multi State

Tender For "fabrication & supply of stainless steel shells by cutting, rolling, welding, buffing etc. of stainless steel sheets as complete job as per approved design and specification of tpp/nr/lko."

Central Government/Public Sector

CTN :40107624

14 May, 2025 NA

Davangere - Karnataka

Tender For supply of stainless steel sheet/plates of size 1500 mm x 723 mm x4 mm as per item no.01 of drg.no. wd-23018-s-03 with latest alt & as per spec. no. irsm:44-97 for door blocking of boxn variant of wagons . [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40071835

19 May, 2025 NA

Birbhum - West Bengal

Tender For providing and installation of electro-mechanical accessories at cwr site and allieds works at ekpara pwss, block-rampurhat-i under bolpur mechanical division - supply and delivery of openwell submersible pumping machinery set suitable for wet pit installation complete with stainer along with all accessories with following specification: pump : discharge (q) : (1800-1280) m3/hr. & head (h) : (19-38) mtrs.method of starting : sd, shaft-stainless steel-ss-304, impeller- crome steel/ci/s.s / bronze, suc & del size- 90/80 mm dia, type of position-horizontal. mechanical sealmotor : 12.5hp (suitable for open well)operating voltage : 415 ( 10 %), phase : 3ph, 50 hz 6%speed : 2800 rpm, method of starting : s/dmake : ksb / grundfos / texmo / cri / kbl / mbh / or any approved vendor. ( n.b : manufacturers test certificate along with charecteristics curve, moc and gurantee certyificate have to be submitted at the time of delivery.), supply & delivery at site of 35 mm x 3.5 core size aluminum armored, xlpe insulated 1.1 k.v. grade cable, conforming to is 7098(i) as per direction of eic.(make:- gloster / polycab / mescab / or any approved vendor list of phed.) ( n.b : manufacturers test certificate have to be submitted at the time of delivery.), supply & delivery of 100a kit-kat rewireable (porcelain fuse carrier & base) (make:- havells / l&t / or any approved vendor list of phed.), supply & delivery of 100 amps re-wireable porcelain fuse unit type tpn main switch with steel sheet enclosure (conforms: is/iec600947-1&3). (make: havells /approved vendor list of phed.), supply & delivery of re-wireable type tpn changeover switch 100 amps 415v, 50hz, 4 pole offload with steel sheet enclosure (conforms: is/iec60947-1&3). (make: havells /approved vendor list of phed.), 100 amps, 4way, wall mounted copper busbar chamber with steel sheet enclosure (conforms:is/iec:60947-3). (make: havells /approved vendor list of phed.), supply and delivery of the following pipes, valves, pipes and gauges etc at site-- (make: approved vendor list of phed.), 100mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 150mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 100mm dia m.s. blank flange 15mm thick perforated as per is1538., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 100mm dia. cast iron double flanged manually operated rising spindle type sluice valve generally conforming to is: 14846, having body, door, dome / bonnet, gland in graded cast iron to is 210 gr. fg 260, four faces of ss aisi 304 and spindle nut of gunmetal to is 318 gr. ltb 2, outside screw rising stainless steel aisi 304 spindle, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges faced and drilled to is:1538 table 4 & 6. valves tested by closed end method only. (moc & tc needed for valve)., 100mm dia. cast iron double flanged single door swing non-return valve generally conforming to is:5312 part i, having body, door, cover in graded cast iron to is 210 gr. fg 260; body & door rings of stainless steel to ss aisi 304 , hinge pin of ss aisi 304, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges drilled to is 1538 table 4 & 6.(moc & tc needed for valve)., 100 mm dia dismantling joint pn-1.0 ci dismantling joint complete galvanised , stud, nut and washer and follower flanges, drilled to is:1538 table 4 & 6. ( at delivery side of pump ), supply & fixing of perforated gi cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. s&f gi connector, 6mm dia ms suspender, bolts & nuts, steel fastener etc. as required of the following size. incl. al painting of ms support. [200x50x1.25mm x 3mtr long (18swg)] [app

Central Government / Public Sector

CTN :40106745

09 May, 2025 NA

Krishna - Andhra Pradesh

Tender For supply of mild steel sheet 1.6 x 1250 x 2500 to the specification is: 513:2008, "o" grade cr1 cu. as per drg.no. ---- specn: is:513:2008 'o' grade cr1 cu. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38055800

03 May, 2025 NA

Goa - Goa

Tender For corrigendum : supply of 1000 am g , stanchion type c 3 750 steel , stanchion type c 4 1000 steel , stanchion type c 4 1000 am g , stanchion type c 7 1000 steel , stanchion type c 7 1100 steel , stanchion type c 7 750 steel , stanchion type c 8 1000 steel , stanchion type c 8 1100 steel , stanchion type c 9 1000 steel , stanchion type c 9 1100 steel , ring lug steel sheet 26 , stanchion type c 1 1000 steel , guard rail without turnbuckle , guard rail 2600 mm , guard rail 3000 mm , guard rail with additional insulating link 3950 mm , guard rail with additionalinsulating link 4000 mm , guard rail with additional insulating link 4050 mm , guard rail with additional insulating link 4100 mm , guard rail with additional insulating link 4700 mm , guard rail with additional insulating link 5000 mm , guard rail with additional insulating link 5200 mm , guard rail with additional insulating link 5450 mm , guardrail without turnbuckle and without insulating links1000mm , guard rail with additional insulating link 4500 mm , guardrail without turnbuckle and without insulatinglinks1050mm , guard rail without turnbuckle 1500mm , guard rail 1700 mm , guard rail 2700 mm , guard rail 2800 mm , guard rail 2900 mm , guard rail 2950 mm , guardrail without turnbuckleand without insulatinglinks1100mm , guard rail with additional insulating link 3500 mm , guard rail with additional ins , guard rail 3350 mm , guard rail 3200 mm , guard rail with additional insulating link 4600 mm , guard rail with additional insulating link 4650 mm , rail , railing pipe 33 point 8 odx2 point 6 thk is 1239 part i 1979 , railing pipe 30 odx5 thk am g , plate b p h o 6 gost 19903 2015 by ct3c p 2 gost 14637 89 , ss wire 3 t 2 12x18h9t gost 18143 72 , 8 rigging chain with long link at both ends l equal to 380mm , 8 rigging chain with long link at both ends l equal to 430mm , 8 rigging chain with long link at both ends l equal to 500mm , round bar 30 gost 2590 2006by ctc3 p 4 gost 532 2005 , pipe o ts 25 to 6thusond gost 3262 75 , installation charges for the above fittings on board yard 1258 as indiciated in attached ta no h ta 141000 40 rev b dtd 14 08 2024 , cablestud for collapsible stanchion with height750mm with groundingpin steel , stay for collapsible stanchion height1100mm with groundingpin steel , guardrail without turnbuckle and without insulating links 1050mm , guardrail without turnbuckleand without insulatinglinks 1100mm , railing pipe 33point8 odx2point6 thk is 1239 part i 1979 , 8 rigging chain with long link at both ends l equal to 380 mm , 8 rigging chain with long link at both ends l equal to430 mm , 8 rigging chain with long link at both ends l equal to 500 mm , round bar 30 gost 2590 2006byct3 p 4 gost 532 2005 , pipe o ts 25 6000 gost 3262 75 , installation charges for the above fittings on board yard 1259 as indiciated in attached ta no h ta 141000 40 revb dtd 14 08 2024

Central Government/Public Sector

CTN :38329163

02 May, 2025 NA

Goa - Goa

Tender For corrigendum : supply of installation of storm lifrope assembly - stanchion type sh 8 1000 steel , stay for portable stanchion with height 1000 mm steel , ring lug steel sheet 26 , storm rope railing 1150 mm , storm rope railing 3450 mm 2 handles , storm rope railing 4170 mm 2 handles , storm rope railing 5300 mm 2 handles , storm rope railing 11750 mm 4 handles , sheet b o p y 3 gost 19904 90by08x18h1qt m4b gost 5582 75 , ss wire 3 t 2 12x18h9t gost 18143 72 , installation

CTN :40098493

14 May, 2025 NA

Darjeeling - West Bengal

Tender For supply of aluminium 05 feet , pgi tool box of size 60 cm x 45 cm x 30 cm , puf insulated prefab modular shelter of size 12 point 6x7 point 72x2 point 5m out to out dimension including 1 point 50m wide verandah front side incl puf door and windows and glazing , quick setting compound , vitrified tiles 600x600x10mm complete , white cement , looking mirror 450x600x5 point 5mm thick with 4mm ply backing and aluminium , water proofing compound , powder coated curtain rod , curtain rod bracket , double leaf steel lockers half hanging and half shelving will be height 1500x width 900 x depth 475mm shall be made out of 22 gauge mild steel sheet as per technical specs , pvc sheathead copper frls cable1 point 5 sqmm single core with multistrand 1100 volts grade , pvc sheathead copper cable1 sqmm single core with multistrand 1100 volts grade , cable pvc insulated aliminium conductor served with inner sheathing of pvc tape armoured with galvanized steel wire or tape and overall pvc sheathed cross sectional area 10sqmm 2 core , pvc copper frls cable pvc 2 point 5 sqmm , pvc insulated and pvc sheathed multistranded copper conductor flexible industrial cable 100 volts , decorative type ultra slim linear led lighting fixture with extruded polycarbonate , led security light energy saving and environmental friendly long life versatile pressure die cast aluminium ip 66 with high power led , switch piano moduler type 10 amp one way , switch piano moduler type 20 amp one way , socket 10 a modular type , socket multipurpose 3 pin 10 and 3 pin 20 amp modular type of 2 module , ceiling rose 2 to 3 terminal pvc , square block pvc , mcb 6 amps s p 240v , mcb 20 amps s p 240v , mcb spn 40 amps 240v , mcb db spn 12 way double door 240 volts , casing capping 3 by 4 inch length 10ft , pvc elbow for casing capping of size 3 by 4 inch , pvc tee for casing capping of size 3 by 4 inch , surface plastic box suitable for moduler switches and socket of 4 module , surface plastic box suitable for moduler switches and socket of 3 module , solid plate with base frame suitable for surface plastic box of 4 module , solid plate with base frame suitable for surface plastic box of 3 module , blank plate of single module , exhaust fan ms body 300 mm sweep single phase 230 volt 50 hz , lightening conductor with all accessories , elect earthing set with all accessories , double leaf steel lockers half handing and half shelving will be height 2100x width 900 xdepth 475mm , fire exinguisher a b c type portable net 2 kg capacity cylindrical , fd kero heater with min power performance 5 point 5 kw , writing chair with complete cushion and rubber hand rest , steel writing table shall have size of 0 point 90m x0 point 60m and height 0 point 75m with prelaminated bhutan board top of 18mm thickness , water dispenser of 15 ltr capacity single phase 230 v , waste bin 120 ltr dim of 480 x 550 , plaster trowel with wooden handle , plumb bob steel with wire rope best quality complete set , iron pan mortar tasla , rubber hand gloves , fish line , plaster rod 1 point 2 mtr long , water bucket 13 inch dia steel , hammer of 5 kgs with steel wooden handle , hammer of 500 gms with steel wooden handle , full body safety harness light weight designes with breathable open core padding technology that provides optimal air flow

CTN :39774606

26 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For bid to ras corrigendum : supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold, ambuja,ultratech,acc,jk,dalmiya under job no 2633 ug comd bkr as per store list attached , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 63-90 mm graded , stone for rr masonary less than 6 inch , mild steel bars of size 8mm dia conforming to is 432 part i 1982 maketata,sail,jsw , mild steel bars of size 10 mm and above dia conforming to is 432 part i 1982 make-tata,sail,jsw , mild steel bars of size 12 mm and above dia conforming to is 432 part i 1982 make-tata,sail,jsw , mild steel bars of size 16 mm and above dia conforming to is 432 part i 1982 make-tata,sail,jsw , ms binding wire , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various sizes , wooden log for props of size 3.2 mtr long 100mm dia. , app based polymeric membrane minimum weighing 3kg oblique sqm and minimum 3mm thick reinforced with polyster non wove fabric as per store list attached , priming surfaces and applying bitumen as a primer in base of app membrane , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms rhs of size 80x40x3.2 , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms rhs of size 50x25x2.9 , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed maketata,sail,jsw for ms rhs of size 96x48x3.2 , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms plate of size 8mm thick , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms plate of size 10mm thick , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms plate of size 12mm thick , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed maketata,sail,jsw for ms angle of size 40x40x6 for cleat , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete all as directed. , ms flat iron 40x5mm thick for wind tie maketata,sail,jsw , iron welding rod confirming to is 814-2002 isi marked 3.15mm thick 100 nos pkt , water proofing compoundconfirming to is 2645-2003 make-pidilite,dr fixit, fevicol , quick setting compound makepidilite,fevicol,quick fix , cement based paint snowcem make-berger,asian,nerolac , oil bound distemper washable quality of proprietary brand of makenerolac,berger,asian , birla white wall care putty water resistant white cement make-nerolac,berger,asian , ppgi roofing sheet 10 feet x 3 feet long and thickness 0.63 mm with grard film the ppgi sheet shall have minium coating of 4-5 micron epoxy primer and as per store list att , pre painted galvatume aluminium zinc coating gi based plain steel sheet 0.50 mm thick an colour having a tensile strength 550 mpa make-uniix,jindal mectec or eqv brand , synthetic paint enamelled og colour confirming to is 5- 2004 make-berger,asian,nerolac , painting brush 4 inch isi marked , nails various size , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos oblique pkt , anodised aluminium door 1000 mm x2100 double shutter with frame including all fittings and as directed make-jindal,hindalco aluminium section weighing 0.55 kg oblique mtr. , anodised aluminium window triple track 2 track glass and 1 track wire mesh with frame of size 1000mm x 1000mm including all as per store list attached , anodised aluminium ventilator 1200x600 mm fixed type with glass 4mm thick thick including all fittings and as directed as per store list attached , ms anchor bolt, suitable for rcc work, 12mm dia, 300mm long with 2 washer and a nut minimum wt of each bolt and nut

CTN :40098594

14 May, 2025 NA

Kamrup - Assam

Tender For supply of plywood for general purpose , plywood general purpose , rod welding iron , steel sheet carbon , solder soft , blade hack saw

CTN :40098175

14 May, 2025 NA

Kamrup - Assam

Tender For supply of 43 i 43 akl b6518576 pipe wrench 350 mm , g2 9520 000009 steel angles 45x45x5mm , g2 9520 000001 steel angles 20x20x3 mm , g2 9520 000002 steel angles 25x25x3 mm , g2 9520 000003 steel angles 25x25x5 mm , g2 9515 000012 steel sheet carbon cold rolled 1800 x 90 , g2 9520 000010 steel angles 45x45x6mm , g2 9510 000042 steel bar carbon hot rolled flat width x , g2 9510 000114 steel bar carbon hot rolled flat 20 x 6 m , g2 9520 000008 steel angles 40x40x6mm , g2 9520 000007 steel angles 40x40x5 mm , g2 9510 000317 steel bar alloy hot rolled flat 50 x 5mm , g2 9510 000020 steel bar carbon hot rolled round 10 mm , g2 9535 000169 copper sheet 1250x630x2.80mm , g2 9510 000329 steel bar alloy hot rolled flat 75 x 10 m , g2 9510 000318 steel bar alloy hot rolled flat 50 x 6mm , g2 9510 000303 steel bar alloy hot rolled flat 25 x 3mm , g2 9520 000004 steel angles 30x30x3mm , g2 9515 000032 steel sheet carbon galvanised plain 1800x , g2 9510 000022 steel bar carbon hot rolled round 12mm , g2 9510 000058 steel bar carbon hot rolled flat 40 x 6 m , g2 9510 000030 steel bar carbon hot rolled round 40 mm , g2 9510 000319 steel bar alloy hot rolled flat 50 x 8 mm , g2 9510 000307 steel bar alloy hot rolled flat 30 x 6mm , g2 9510 000026 steel bar carbon hot rolled round 25 mm , g2 9510 000084 steel bar carbon hot rolled flat 75 x 12 , g2 9510 000044 steel bar carbon hot rolled flat width x bid number/ & ( * ) : gem/2025/b/6160952 dated/ + : 23-04-2025 bid document/ 3 3 1 / 28

Steel Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector