Latest steel sleeve Tenders | Government steel sleeve Tenders

Central Government/Public Sector

CTN :43246860

05 Jan, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of welded steel conduit pipe 25mm black in colour, both size inner & outer screwed at both ends length 3mtrs with 14swg gauge, conf. to is: 9537, pt. ii, 1981

State Government

CTN :43234974

02 Jan, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of supply assembly erection testing and commissioning of air source heat pump water heater capacity is 500 litre type is v hp 500 immersion heaters heating capacity w is 5800 w , providing and placing on terrace at all floor levels polyethylene water storage tank isi is 12701 marked with cover and suitable locking arrangement and making necessary holes , providing and fixing ptmt extension nipple for water tank pipe fittings of approved quality and colour 25 mm nominal bore weighing not less than 62gms , providing and fixing gi pipes complete with gi fittings and clamps including cutting and making good the walls etc internal work exposed on wall 25 mm dia nominal bore medium , providing and fixing g i union in g i pipe including cutting and threading the pipe and making long screws etc complete new work 25 mm nominal bore , providing and fixing gate valve with of approved quality 25 mm nominal bore , providing and fixing ball valve brass of approved quality high or low pressure with plastic floats complete 25 mm nominal bore , providing and fixing polyethylene aluminum polyethylene pe alpe composite pressure pipes conforming to is is 15450 uv stabilized with carbon black having thermal stability , steel work welded in built up sections framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc as required

corporations/Associations/Others

CTN :43236077

12 Jan, 2026 20.90 Lacs

Anpara - Uttar Pradesh

Tender For supply of straight annual rate contract welded and concentric seamless coal pipe for 2x500 mw, btps, anpara

CTN :43165482

22 Dec, 2025 15.17 Lacs

Panchkula - Haryana

Tender For providing and fixing of open gym equipment in various parks of sector 26 , ward no 18, panchkula. - works details, air walker: providing, designing and fixing of air-walker of size 100 550 1480mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. base plate cover shall be made up of virgin lldpe plastic by rotational moulding with minimum 4.00mm thickness u v resistant and colour as approved by engineer-in charge. high quality grip rubber should be used on handles. foothold shall be made of nylon alloy with rounded edge to prevent impact and injury. maintenance free bearing should be used in equipment manufactured by reputed company duly sealed and self lubricated to be approved by engineer in charge. equipment to be fitted with inbuilt limiters. the equipment should be fixed on ground with concrete of minimum strength m25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc., horse rider station: providing, designing and fixing of horse rider station each of size 1000 x 600 1100 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using akzo nobel or equivalent of 80-120 micron thick. all welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zine primer paint to be applied at all welding points prior to finishing. padals shall be made up nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and u v resistant environmental friendly.bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by engineer-in-charge. equipment to be fitted within built limiters to prevent unwanted movements. all open ends of pipe to be coloured by gi/lldpe caps for user safety. the equipment lope fixed on ground with concrete of minimum strength m25 and j shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc., leg press: providing, designing and fixing of stair stepper in a combinationof pair and a single step of size 2000 x 550 x 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using akzo nobel or equivalent of 80-120 micron thick.all welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars are to be provided with high quality grip rubber at top end. padals shall be made up of nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and u v resistant environmental friendly.bearing used shall be maintenance free, duly oiled sealed and

CTN :43234588

08 Jan, 2026 NA

Delhi - Delhi

Tender For tender for supply of providing and placing of cafeteria table. overall size: 1734mm (w) x 1175mm (d) x 750mm (h). top shall be 25 mm thick base material shall be 25 mm mdf board on top pu painting of minimum 2h hardness with 75% gloss. combination color graphics on the centre. brown laminate on bottom. specially profilled edge for comfort. the understructure shall be having bend pipe structure of ms powder coated. pipe dia. 38 mm, 2 mm thick and it shall be fitted with top by ss machine screws. legs shall be of ss and 38 mm dia. pipe legs are fixed with inderstructure and table top. glide shall be of plastic fixed at the understructure to prevent the damage of table top during stacking. certifications: the product should be certified with indoor advantage gold certified and the company should be iso 9001:2015, iso 14001:2015, 45001:2018, and iso 50001:2018, bifma membership and aiota certified. , providing and placing of center table. the top shall be made of 10mm ± 0.3mm thick black tinted toughened glass uv glued with bushes made in ss 202 grade for fixing with understructure. it shall be a welded assembly made in ss202 grade having dia. 12 ± 0.04 as per is:1762. overall dimensions of table shall be= width- 112.0 cm, depth- 60.0 cm, height- 34.9 cm. certifications: the company should be iso 9001:2015, iso 14001:2015, 45001:2018, and iso 50001:2018, bifma membership and aiota certified. - providing and placing of bookcase 4 door. overall size: 914mm (w) x 300mm (d) x 1742mm (h). construction: rigin knock down construction, material of top, side & back: made out of 0.7mm thk crca steel & stiff confirming to is-513, gr.d, material of door: 4 mm thk transparent toughened glass for clear inside vision secured in a metal frame through rubber gasket. locking: cam lock with common key. handle: plastic side end caps as handle which shall be easy to grip. load bearing capacity of each shelf: max. 80 kg (uniformly distributed load). finish: epoxy powder coated to the thickness of 50 microns (±10). certifications: the product should be certified with greenguard (ul), indoor advantage gold, green pro certified and the company should be iso 9001:2015, iso 14001:2015, 45001:2018, and iso 50001:2018, bifma membership and aiota certified. , providing and placing executive table with eru. overall size: 1650mm (w) x 900mm (d) x 740mm (h), size of eru: 1550mm (w) x 450mm (d) x 705mm (h). top & side panel: made up of 25mm thick plain particle board clad with 0.6mm thick post formed laminate and 1mm thick backing laminate and flat edge duly sealed with 2mm thick pvc beading, modesty: made up of 18mm thick plain particle board clad with 1mm thick decorative laminate on both sides and edges sealed with 2mm thick pvc beading. certifications: the product should be certified with indoor advantage gold certified and the company should be iso 9001:2015, iso 14001:2015, 45001:2018, and iso 50001:2018, bifma membership and aiota certified. , providing and placing conference table- 14 seater. overall size: 4200mm (w) x 1500mm (d) x 740mmmm (h). work top of table: made of 25mm thick pre- laminated twin board of e1-p2 grade and approved shade conforming to is- 12823:1990, edge banded with matching 2 mm thick pvc lipping. soft closing dual access flap provided for access to power supply and data cables. understructure of table: the understructure consist of mixture of 25mm and 18mm pre- laminated twin board of e1- p2 grade and approved shade conforming to is- 12823:1990, edge banded with matching 2mm thick pvc lipping, anodised aluminium alloy 63400- wp profile is added at bottom edges for improving the aesthetics of table, the product has a knockdown construction. wire management: a wire raiser made of 0.8mm crca ms is:513. it is epoxy polyester powder coated (dft 40-60 microns) for flow of wires and cables. certifications: the product should be certified with greenguard (ul), indoor advantage gold, green pro certified and the company should be i

CTN :42932979

24 Dec, 2025 NA

Thiruvarur - Tamil Nadu

Tender For corrigendum : supply of steel sleeve 45x. 72odx48idx175mmlg to drg no. 2001-58-2, 61&82(as per drawings and specifications)

corporations/Associations/Others

CTN :42934822

22 Dec, 2025 20.34 Crore

Sealdah - West Bengal

Tender For corrigendum : supply of spirally welded mild steel pipe as per is 3589: 2001 (od1016mm, thick-10mm, grade-fe410) , spirally welded mild steel pipe as per is 3589: 2001 (od- 508mm, thick-11mm, grade-fe410) , spirally welded mild steel pipe as per is 3589: 2001 (od- 1626mm, thick-14. 2mm, grade-fe410)

Central Government/Public Sector

CTN :43229576

16 Jan, 2026 NA

Dahod - Gujarat

Tender For supply of pipe 32 n.b. with flanges & sockets (welded assembly)

CTN :43164216

02 Jan, 2026 NA

Ernakulam - Kerala

Tender For supply of fabrication of frame with ms square pipe of dimensions 1. 5 inch across 8 ft x 12 ft 1 point 5 inch dia , ms mesh with 1 inch spacing and hard welded to provide access control not more than 1 inch x 1 inch gap , lockable arrangement and doors for emergency exit 4 feet x 7 feet , lockable arrangement on outer side of the barricading material ss 4 feet x 7 feet , painting of the grill in black for avoidance of blind spot for cctv camera a r , installation charges