Latest steel strip Tenders | Government steel strip Tenders

State Government

CTN :43467490

13 Jan, 2026 NA

Delhi - Delhi

Tender For s/i/t/c of e/m equipments and allied works for newly re-bored tube well at okhla vihar near majar in okhla constituency ac-54. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 15 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point: 200-125-75 lpm on 89-124-133 mtr. head.having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved. , supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted. a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no. b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 no c) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no. e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable banking g) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos.complete wiring &installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated and pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs. make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., supply of ms nut bolts off size as per requirement., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 1x1 made out from 6mm thick m.s. sheet in 2 halves and a circular hole in centre 3-1/2 dia. with locking arrangement by nuts and bolt. , earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

CTN :43502434

19 Jan, 2026 NA

Jabalpur - Madhya Pradesh

Tender For supply of steel strip to part no: ifl-8446, design no: ilg-2617/1 and ds cat no: 9115-000939[ dc no: 19292-w , lever control hand to part no: ifl-8447, design no: ilg- 2620 and ds c at no: 3040-003058[ dc no: 192

CTN :43484174

17 Jan, 2026 NA

Jabalpur - Madhya Pradesh

Tender For supply of n1 9115-000939 steel strip

CTN :43469353

13 Jan, 2026 21.64 Lacs

Bolpur - West Bengal

Tender For construction of staff quarters type ii and type iii at santiniketan bolpur. sh boundary wall with chain link fencing between t iii and road with a ms gate, grill upto ceiling level at all balcony of 6 nos. t ii and 8 nos. t iii quarters, fixing extra mild steel member at exhaust fan opening at all quarterssubwork/packages:na

CTN :43421570

23 Jan, 2026 61.30 Lacs

Nagpur - Maharashtra

Tender For supply of 50 sq. mm, 3-1/2 core armoured cable stranded aluminium conductor, galvanised steel strip, type of she , 35 sq. mm, 3-1/2 core armoured cable stranded aluminium conductor, galvanized steel strip, type of sh , 70 sq mm, 3-1/2 core armoured cable standerd aluminium conductor, galvanized steel strip, type of sh , 95 sq mm, 3-1/2 core armoured cable stranded aluminium conductor, galvanized steel strip, type of sh , 120 sq mm, 3-1/2 core, armoured cable stranded aluminium conductor, galvanized steel strip, type of she , 185 sq. mm, 3-1/2 core, armoured cable stranded aluminium conductor, galvinize steel strip of sheeth , 240 sq. mm, 3-1/2 core armoured cable stranded aluminium con- ductor, galvanized steel strip, type of , 300 sq. mm, 3-1/2 core armoured cable stranded, aluminium conductor, galvanized steel strip, type of s

CTN :43419738

12 Jan, 2026 NA

Mathura - Uttar Pradesh

Tender For tender for supply of tab web 50x190mm , spanners ring bihexagon cranked double e , spanner open jaw fixed double ended stee , spanner open jaw fixed double ended stee , spnr o j f d e stl pltd mm 19x22 , spanner open jaw fixed double ended stee , spanner open jaw fixed double ended stee , m seal , steel bar carbon hot rolled round 11mm , universal member for tent extndbl f sup , tank canvas water s type covers mk-1 , spanner adjusting scale

Central Government/Public Sector

CTN :43400082

22 Jan, 2026 29.02 Lacs

Bangalore - Karnataka

Tender For tender for supply of fab and supply of detailed metallic parts c422lch1019 c422alh1220 c c -plate , bearing pin , steel strip , handle lever emer exit assy , locking pin emer exit assy , guide bracket emer exit assy , bell crank lever emer exit assy , lever support emer exit assy , lever support , spacer , spacer , angle emergency exit assy , handle emergency exit assy , handle locking mechanism sliding , bracket locking mechanism sliding , locking pin , guide bracket emer exit assy , link tube link tube assy , link tube link tube assy , link tube , link tube , link tube link tube assy , link tube , fork end emergency exit assy , link tube , bracket latch lh side , washer , lever locking mechanism pilot do , washer , lever locking mechanism pilot do , taper pin , handle rh locking mechanism pilo , lever locking mechanism sliding , lever sliding door , lever , handle rh , balance weight 1 , balance weight 2 , balance weight 3 , doubler lh , doubler rh , lever locking mechanism sliding doo , bush fwd trim chamber , retainer fwd trim chamber , bush aft trim chamber , retainer aft trim chamber , cap trim chamber , trim tab , adaptor mrb , bush damper , end cover , sleeve outer , sleeve inner