Latest steel structures Tenders | Government steel structures Tenders

State Government

CTN :42002475

04 Nov, 2025 28.02 Lacs

Anuppur - Madhya Pradesh

Tender For corrigendum : painting of steel structures,dam gates stop log gates and replacement of damaged rubber seal of vertical gates,stop log of suthana reservoir at atps chachai

CTN :42435618

30 Oct, 2025 25.82 Lacs

Delhi - Delhi

Tender For minor work of central park at sector-v, pushp vihar, m.b. road, new delhi during 2025-26. (sh:- supplying and laying of acrylic synthetic badminton court, relaying of paver block, brick work of boundary wall, structural steel work, providing and fixing of frp sheet and other miscellaneousllaneous works).subwork/packages:sh:- supplying and laying of acrylic synthetic badminton court, relaying of paver block, brick work of boundary wall, structural steel work, providing and fixing of frp sheet and other miscellaneousllaneous works.

Central Government/Public Sector

CTN :42422846

13 Nov, 2025 NA

Asansol - West Bengal

Tender For fabrication, procurement, supply of steel structures and unloading, storage, erection of fabricated steel structures, supply and erection of sheets, etc. required on behalf of m/s sms_i_ for coal handling facilities for stamp charged cob 12 site of iisco steel plant _sail-isp_ at burnpur, asansol _wb_.

corporations/Associations/Others

CTN :41905239

05 Nov, 2025 NA

Madurai - Tamil Nadu

Tender For corrigendum : supply, fabrication and erection of gi steel structures, earthing materials, etc., for introduction of 33 kv ratio at existing kappalur 110kv ss

corporations/Associations/Others

CTN :41905244

05 Nov, 2025 NA

Trichy - Tamil Nadu

Tender For corrigendum : project code: te-22v-0011- supply, fabrication and erection of gi steel structures, earthing materials, station equipments, control panels, control cables, painting, handling of department equipments etc., for the upgradation of existing valayankulam 33/11kv ss into of 110/33/11 kv ss with 1 x 16 mva 110/33kv ratio power transformer at valayankulam in madurai edc

Central Government/Public Sector

CTN :42338329

30 Oct, 2025 5.56 Lacs

Kanyakumari - Tamil Nadu

Tender For supply, fabrication, erection and painting of ms structural as per the scope of work and drawing.(structural steel conforming to is 2026:2011 of make jindal/essar/tata/sail/rinl), shifting installation and commissioning of redms as specified and scope of works specified in the tender

CTN :42294595

28 Oct, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of earthwork excavation with outside disposal as per boq in atc document , pcc 1-4-8 as per boq in atc document , rcc 1-1.5-3 upto plinth level as per boq in atc document , supply and laying reinforcement steel as per boq in atc document , ground surface dressing as per boq in atc document , relaying of old paver block as per boq in atc document , earthwork excavation with inside disposal as per boq in atc document , pcc 1-2-4 as per boq in atc document , supply and laying of road wbm 100 mm 63-90 mm as per boq in atc document , supply and laying of road wbm 75 mm 45-63 mm as per boq in atc document , supply and laying of paver block m-40 as per boq in atc document , brick masonary upto plinth cl 50 brick as per boq in atc document , cement plaster 12 mm as per boq in atc document , supply and erecting structural work as per boq in atc document , supply and erecting chain link fencing 1.8 m height as per boq in atc document

Central Government/Public Sector

CTN :42386567

12 Nov, 2025 NA

Moradabad - Uttar Pradesh

Tender For heavy repair and painting of steel structures & heavy repair to road surface at various lc's in the section of sse/w/ch under aden/ch.

State Government

CTN :42251933

01 Nov, 2025 4.00 Lacs

Doda - Jammu And Kashmir

Tender For procurement of security related items/systems as per directions of security agencies like 04 no. integrated tyre burster with boom barrier etc. - steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (for further details refer sbd) , solid plastic tyre on steel rim minimum dia. 4 inch (for further details refer sbd), painting with synthetic enamel paint of approved brand and manufacture to give an even shade. two or more coats on new work (for further details refer sbd), lettering with black japan paint of approved brand and manufacture. (for further details refer sbd), carriage of material by means of mt for steel for 50 kms (mt)

State Government

CTN :42353229

14 Nov, 2025 62.02 Lacs

Gandhinagar - Gujarat

Tender For supply, installation, testing and commissioning of bowser filling arrangement at fire station in dta area of gift city - 1200016578vertical turbine pumpset 6000 lpm 40 m"pump set:supply, installation, testing and commissioning of vertical turbine pumping set complying to moc as mentioned below;a) discharge head material - steel fabricatedb) column pipe material - steel fabricatedc) line shaft and coupling material ss aisi 410d) bowl diffuser material - cast iron fg 260e) impeller - bronze lbt2f) pump shaft material - ss aisi 410g) seal material - gland packingh) suction bell strainer material - ss aisi 304 pn 16 compliant pump with motor of ie2 efficiency rating, 1450 rpm, ip 68 enclosure suitable for 400 or 440 volts, 3 phase, 50 hz a.c.supply no. of pumps: 2 (1 working +1 standby) equal to 1 set . complete set system to be mounted on a suitable footing, suction should include suitable strainer arrangement.pump set shall be suitable for opration to suit for fire water circulation. pump set to be installed in underground fire water tank.minimum pump efficiency 70 percent.the cost must be inclusive of associated civil work complete as per instruction of giftcl engineer- in - charge.the cost includes lifting, shifting, loading, unloading, testings etc. as required for installation as per drawing and as directed by giftcl engineer-in-charge.for bowser filling arragement at fire station, gift city set of two pumps( 1 working+ 1 standby)capacity - 6000 lpmhead - 40 m, 1200016579ms erw pipe c class 250mm dia"ms pipe: ""supply, installing, testing and commissioning of erw ms pipe of c class (heavy duty) conforming to is 3589 as per tender specification and as directed by the engineer in-charge. pipes to be supplied with bevel ends and to be black varnished on outside surface. painting with primer application and 2 coats of enamel paint of approved colors.quoted rate shall includes the following:a. supply & installation of fiitings like blind flanges with matching flanges (as per asme 16.47 series b/is 1538), elbows, tees, reducers (as per asme 16.9), mitre joint, asbestos free gaskets, nut bolts, reinforcement pads, suitable structural support arrangement etc. painting with primer application and 2 coats of enamel paint of approved colorsb. lifting, shifting, loading, unloading, cutting, grinding, welding, non destructive testings like visual test, dpt, rt etc. as required for installation of pipe as per drawing and as directed by engineer-in-charge for the following size: 250 mm dia erw pipe of minimum 6 mm thickness""", 1200013274sitc 200mm dia erw pipe"supply, installing, testing and commissioning of erw carbon steel pipes of grade fe 410 conforming to is 3589 as per tender specification and as directed by the engineer in-charge. pipes to be supplied with bevel ends and to be black varnished on outside surface. painting with primer application and 2 coats of enamel paint of approved colors.quoted rate shall includes the following:a. supply & installation of fiitings like blind flanges with matching flanges (as per asme 16.47 series b/is 1538), elbows, tees, reducers (as per asme 16.9), mitre joint, asbestos free gaskets, nut bolts, reinforcement pads, etc. b. lifting, shifting, loading, unloading, cutting, grinding, welding, non destructive testings like visual test, dpt, rt etc. as required for installation of pipe as per drawing and as directed by engineer-in-charge for the following size: 200 mm dia erw pipe of minimum 6 mm thickness", 1200013276sitc pressure guage 0-6 kg/cm2 rangesupply, installation, testing & commissioning of 150 mm dial size pressure gauge with range 0 - 6 kg/cm2 to monitor the pressure in line, with accuracy 1 percent of span, overage protection 150 percent of full range and ip 65 enclosure protection as per tender specifications and as directed by the engineer in-charge., 1200000526nrv 250 mm sitcnon return valves- providing, supplying, lowering, laying and jointing in position following c.i.d

Steel Structures Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors