Latest sterilizer coil Tenders | Government sterilizer coil Tenders

Central Government And Public Sector

CTN :44804249

21 Apr, 2026 29.63 Lacs

Delhi - Delhi

Tender For for the providing of building materials and execution the work under the work emergency repairs of the structures at the group of monuments, hauz khas, new delhi - material and work, un slacked lime (air tight packing/bass), river coarse sand free from clay, dust, foreign materials, surkhi of 1st class bricks free from clay, dust, foreign materials, belgiri dry, gur/ sheera (air tight packing/bass), gum, san, brick agg. (20 to 25 mm n/s)graded form, brick aggregate (10 to 20mm n/s) graded form, cr stone as per site incharge or site requirement, dq stone as per site incharge or site requirement, brickzira graded form, lakhori brick required size and shape, sun jute, pvc bucket standard size, pvc mug standard size, pvc water tank 500 liters isi marked, pvc pan (tasla), green net, pvc gum boot, pvc pipe 1.5" isi marked, work in progress board with ms angle iron 25x25x5 mm with 1mm ms sheet in both side of writing in hindi & english etc complete, pvc helmet for labour isi marked, safety jacket for labour isi marked, safety belt isi marked, pvc drum 200ltr, tell -tale as per site required, copper dowels (size 6inch), araldite standard epoxy adhesive (resin 1kg + hardener 800g), provision for photo documentation of conservation work before, during & after the execution of work in proper album two set, structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete., providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron y shaped placed 2.4m or 3.00 m apart and with 9 horizontal r.b.t. reinforced barbed wire, stud tied with g.i. staples and g.i. clips to retain horizontal, including necessary bolts or g.i. barbed wire tied to angle iron, all complete as per direction of engineer-in-charge, with reinforced barbed tape(r.b.t.) / spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of m.s. angle, c.c. blocks shall be paid separately){m}, earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge., demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineer- in-charge, dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead dismantling old lime plaster, disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge., "providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety feat

Central Government / Public Sector

CTN :44707468

21 Apr, 2026 NA

Panipat - Haryana

Tender For corrigendum : procurement of mitsubishi make gt spares - list of item(s) / work(s) as per tender documents, fuel nozzle,p/n gfnoz-1, heli coil,p/n-310qc67-724-4, 12 point bolt,p/n-5,dwg-310qc67-724, support,p/n-310qc67-724-8, seal,p/n:9,dwg-310qc67-724, hex.head bolt,p/n:10, dwg-310qc67-724, hex.head bolt,p/n:11,dwg-310qc67-724, hex.head bolt,p/n-310qc67-724-12, u-nut,p/n-13,dwg-310qc67-724, cover spacer,p/n:14,dwg-310qc67-724, bolt,p/n-36,dwg310qc64-292, washer,p/n:37,dwg:310qc64-292, pin,p/n:45,dwg:310qc64-292, combustion liner,p/n 4, drg 310qc54-600, adapter,p/n 5, drg 310qc54-600, gland,p/n 6, drg 310qc54-600, cross fire tube,p/n 8, drg 310qc54-600, cross fire tube,p/n 9, drg 310qc54-600, vortex gasket,p/n 16, drg 310qc54-600, vortex gasket,p/n 17, drg 310qc54-600, metal jackt gasket,p/n20,drg 310qc54-600, metal jackt gasket,p/n21,drg 310qc54-600, ring packing,dwg:310qc56-101,p/n:22, hex. head bolt,p/n 23, drg 310qc54-600, transition piece p/n-1,dwg. 310qc32-464, clamp p/n-2,dwg. no. 310qc32-464, shim(1.0t),p/n:3,dwg:310qc32-464, shim(1.5t),p/n:3,dwg:310qc32-464, side seal,p/n:4,dwg:310qc32-464, stopper,p/n:5,dwg:310qc32-464, stopper,p/n:6,dwg:310qc32-464, guide pin,p/n:8,dwg:310qc32-464, hex. head bolt,p/n:13,dwg:310qc32-464, hex. head bolt,p/n:14,dwg:310qc32-464, hex. head bolt,p/n:15,dwg:310qc32-464, lock plate,p/n:16,dwg:310qc32-464, lock plate,p/n:17,dwg:310qc32-464, lock plate,p/n:18,dwg:310qc32-464, lock plate,p/n:19,dwg:310qc32-464, heli coil,p/n:20,dwg:310qc32-464, heli coil,p/n:21,dwg:310qc32-464, heli coil,p/n:22,dwg:310qc32-464, 1st stage shroud p/n-7,dwg. 310pb44-454, 2nd stage shroud,p/n:8,dwg:310pb44-454, 3rd stage shroud,p/n-310pb44-454-9, lock pin,p/n:45,dwg:310pb44-454, lock pin,p/n:63,dwg:310pb44-454, heli coil,p/n:2,dwg:310pb44-454, guide dwg-310pb44-454 p/n:3, hex. head bolt dwg-310pb44-454 p/n:4, lock washer dwg-310pb44-454 p/n:5, lock washer dwg-310pb44-454 p/n:6, plug,p/n:38,dwg:310pb44-454, plug dwg-310pb44-454 p/n:39, plug,p/n:40,dwg:310pb44-454, plug rod,p/n:42,dwg:310pb44-454, plug plug dwg-310pb44-454 p/n:43, plug rod,p/n:44,dwg:310pb44-454, 12 point bolt,p/n:50,dwg:310pb44-454, 12 point nut,p/n:51,dwg:310pb44-454, reamer bolt,p/n:52,dwg:310pb44-454, reamer bolt,p/n:53,dwg:310pb44-454, stud bolt,p/n:54,dwg:310pb44-454, stud bolt,p/n:55,dwg:310pb44-454, plug,p/n:56,dwg:310pb44-454, coil spring,p/n:57,dwg:310pb44-454, plug,p/n:58,dwg:310pb44-454, plug rod,p/n:59,dwg:310pb44-454, plug rod,p/n-60,dwg-310pb44-454, hex. head bolt,p/n:64,dwg:310pb44-454, 12 point bolt,p/n:65,dwg:310pb44-454, 12 point nut,p/n:66,dwg:310pb44-454, 12 point bolt,p/n:67,dwg:310pb44-454, heli coil,p/n:68,dwg:310pb44-454, heli coil p/n-72,dwg. no. 310pb44-454, heli coil,p/n:73,dwg:310pb44-454, reamer bolt,p/n:8,dwg:310pb44-455, 12 point bolt,p/n:10,dwg:310pb44-455, self lock nut,p/n:16,dwg:310pb44-455, washer,p/n:23,dwg:310pb44-455, 12 point bolt,p/n:24,dwg:310pb44-455, packing,p/n:26,dwg:310pb44-455, packing,p/n:27,dwg:310pb44-455, lock washer,p/n:32,dwg:310pb44-455, lock washer,p/n 33,dwg 310pb44-455, lock washer,p/n:34,dwg:310pb44-455, hex. head bolt,p/n:36,dwg:310pb44-455, heli coil,p/n:38,dwg:310pb44-455, heli coil,p/n:40,dwg:310pb44-455, nut,p/n-a,310rb77-727, cap nut,p/n-b,310rb77-727, baffle,p/n-310pb44-455-6, baffle,p/n-310pb44-455-7, no.2 brng liner,p/n:2,dwg:310pb44-453, oil seal,p/n:3,dwg:310pb44-453, oil seal,p/n:4,dwg:310pb44-453, oil deflector,p/n:5,dwg:310pb44-453, shim,p/n:34,dwg:310pb44-453, shim,p/n:35,dwg:310pb44-453, reamer bolt,p/n:7,dwg:310pb44-453, 12 point nut,p/n:8,dwg:310pb44-453, 12 point bolt,p/n:9,dwg:310pb44-453, reamer bolt,p/n:10,dwg:310pb44-453, 12 point nut,p/n:11,dwg:310pb44-453, 12 point bolt,p/n:12,dwg:310pb44-453, 12 point bolt,p/n:13,dwg:310pb44-453, 12 point bolt,p/n:14,dwg:310pb44-453, 12 point bolt,p/n:15,dwg:310pb44-453, 12 point bolt,p/n:16,dwg:310pb44-453, pin,p/n:17,dwg:310pb44-453, pin,p/n:18,dwg:310pb44-453, pin,p/n:19,dwg:310pb44-453, plug,p/n-310pb44-453-24, plug,p/n-310pb44

Central Government/Public Sector

CTN :44903091

28 Apr, 2026 NA

Bhusawal - Maharashtra

Tender For manufacturing and supply of single coil spring washer conforming to rdso drawing. no. t-10773. this is a safety item. specification: single coil spring washers shall conform to irs specification irs t-42-2020 with latest alteration. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43709478

17 Apr, 2026 NA

Haridwar - Uttarakhand

Tender For bid to ras tender for supply of washers and split pins d d - machined washer , size- 13 (for screw size-m12) as per is-2016 , material- steel hardness class 140 hv , finish- zinco_nickel. dimensions , tolerances and technical requirements as per is-2016 n.std-is-2016 size- p/n 210806357 , split pin -2x12-iso 1234 mild steel - cadmium cromated. n.std-iso-1234 size- p/n 220810051 , tab washer(with long tab) size -6.4 (suitable for bolt size- m6)as per is-8068 , type-a/ din 93/uni 6600 , material- steel(having tensile strength -294-490n/mm2 , hrb-less than 73) , finish-zinco- nickel , dimension , tolerances and general requirement as per govening standatd n.std-- size- p/n 210806573 , 210878243 , split pin 3x18-iso 1234 mild steel - cadmium cromated n.std-iso-1234 size- 220810071 , machined washer , size- 10.5 (for screw size-m10) as per is-2016 , material -steel hardness class 140 hv , finish- zinco_nickel. dimensions , tolerances and technical requirements as per is-2016 n.std-is-2016 size- p/n 210806356 , punched washer b 10.5 is 2016 material- c60 as per is 2507 (electroplating as per iso - 4042 - b2g) n.std-is-2016 size- 210806387 , single coil spring washer b 8.4 is3063. material- c60 as per is2507 (electroplating as per iso 4042-b2g) n.std-is-3063 size- p/n 210806484 , tab washer(with long tab) size -19 (suitable for bolt size- m18) as per is-8068 , type-a/ din 93/uni 6600 , material- steel(having tensile strength -294-490n/mm2 , hrb-less than 73) , finish-zinco- nickel , dimension , tolerances and general requirement as per govening standatd n.std-- size- p/n 210878249 , lock washer (with bent inner tab) 20 dia iso 2982. material - c15 as per is 2062. (electroplating as per iso - 4042-b2g) n.std-iso-2982 size- p/n 250870204 , tab washer , type a(with long tab , size-13 (suitable for bolt size m12) as per is-8068/ din 93/uni6600 , material-steel (having tensile strength- 294-490n/mm2 , hrb-less than 73) , finish- cadmium cromated or zinco- nickel , dimensions , tolerances and general reqmt. as per governing standard n.std-is-8068 size- p/n 210806596/210878246 , flat washer (for clevis pin) , id-16mm (for pin size-16mm) as per din 1440/ iso 8738 , material- steel , finish- zinconickel , dimension , tolerance and other technical details per governing standard size- pn 210806459

Central Government / Public Sector

CTN :44901157

07 May, 2026 NA

Kazipet - Telangana

Tender For corrigendum : supply of spring washer as per clw specification no. clw/ms/3/085 alt-9, single coil, rectangular, galvanized, size: b-36 to specification is: 3063/1994 type-b and is:4072, gr.4. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :44901755

18 May, 2026 NA

Guntakal - Andhra Pradesh

Tender For corrigendum : manufacture and supply of single coil spring washer to rdso drg. no. t-10773 with latest alteration, if any and conforming to specification irs:t-42-2020 (revision -1) with latest amendments, if any. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :44901517

05 May, 2026 NA

Secunderabad - Telangana

Tender For corrigendum : supply of hexagonal head screw full thread with one nut, three spring washers and two flat washers as per the following details. sl.no.1. hexagonal head screw full thread with nut size: m10 x 1.5 mm 60 degree metric pitch x 50 mm long as per is:1364 & is:1367,property clause 10.9. qty/set 1.set, sl.no.2.spring washer,size: m 10.b single coil steel as per is;3063/1994.qty/set.3.nos, sl. no.3.flat washer size id 11 mm, od 24 mm,thickness 2 mm as per is:2016/67.qty/set.2.nos. hexagonal screw, nut and flat washer are to be coated with zinc as per as per drg.no. is:1573/1986 and spring washer is to be phosphated accepted offer : unbrako make mfg. by m/s. deepak fasteners ltd. (clw / rdso / icf approved source) standard quality is: 1364/part 2 & 3/2002 and property grade 10.9 for bolt and grade 8/10 for nut with spring washer to is: 3063 and flat washer standard to is: 2016 only dimension od-21mm, id-11mm, thickness 2mm [ warranty period: 30 months after the date of delivery ]

CTN :44902146

25 Apr, 2026 NA

Jalandhar - Punjab

Tender For supply of 10411648 5350-000024 abrasive paper emery or corundum is grit , 10414901 9505-000009 wire steel mild annealed 1.60mm , 10409845 5310-001405 washers spring single coil type b stee , 10415470 5310-001019 nuts unf 2b precision a steel hexagon , 10411825 5306-000812 bolt met b s hex hd u m with hex nut fac , 10416164 8010-000272 varnish gold size , 10537303 5330-001907 jointing asb f comp gr 1.6mm 100x100cm , 10535881 8030-000032 mineral jelly ammunation , 10410459 5530-400076 plywood general purpose wwr-bb-3 ply 180 , 10420917 5530- 000227 plywood for general purposes mr-aa 3 ply , 10415312 7930-000014 soap laundry , 10411040 5315- 000822 nails steel wire round 70 mm x 3.15 mm , 10596967 9525-000070 wire copper soft for gen purp 0.80 mm , 10410949 5315-000827 nails steel wire round 125 mm x 5.0 mm , 10410608 8010-000483 varnish stain black

CTN :44816221

13 May, 2026 11.50 Crore

Patna - Bihar

Tender For rate contract for supply of surgical items at aiims patna ,, 0.014" hydrophilic coating over polymer jacket,tip radiopacity-16cm tip load-0.6gf and tapered tip wire length-190cm, 0.014" hydrophilic coating over polymer jacket,tip radiopacity-16cm tip load-1.0gf with tapered tip wire length-190cm, 0.014" polymer jacketed,hydrophilic wire with stainless steel core with tip load 0.8gf,radio-opaque length-16cm,length-190cm,spring coil length-16cm (tip diameter-0.09")tapered tip, 0.014" weighted tip cto guidewire with hydrophilic and hydrophobic coating, us fda approved, tip load upto 25gm, 0.018" weighted tip cto guidewire with hydrophilic and hydrophobic coating, us fda approved, tip load upto 25gm, 0.035 guidewire-ptfe coated,various length and stiffness, 0.035" otw, uncovered venous braided stent, 14mm-24mm diameter, various length, elgiloy superalloy, mri compatible, otw sys, braiding angle <110, shaft length 75cm, reconstrainable compatible., 0.053" intracranial access catheter with hybrid coil design, 0.070" intracranial access catheter with hybrid coil design, 1% chg w/w waterless surgical scrub 500ml, 1% sodium hyaluronate , 1.4% sodium hyaluronate, 1.65% sodium hyaluronate + 4 % chondroitin sulphate , 1.7 fr peripheral microcatheter, assorted length and tip shape, 10 size extrasoft 3d hydrocoil for neurointervention, assorted length and diameter, 10 size filling hydrocoil for neurointervention, assorted length and diameter, 10 size framing 3d/complex hydrocoil for neurointervention, assorted length and diameter, 10 size helical hydrocoil for neurointervention, assorted length and diameter, "10-0 plypropylene double armed suture with round body needle ", 1000 ml bottle for indwelling pleural catheter, 1000 ml vacuum bottle with active vacuum technology, 17% edta gel, 17% edta liquid irrigant, 18 size framing 3d/complex hydrocoil for neurointervention, assorted length and diameter, 18 size interlocking fibered coils for peripheal intervention, assorted length and diameter, 18 size soft bare metal interlocking coils for peripheal intervention, assorted length and diameter, 18g 25 cm tru-cut biopsy gun, 190 ml syringe with qft, 2% anti microbial chg transparent gel pad,breathable transparent film with reinforcing documentation tape strip film coated stabilization border with notch for cvc dressing , 2% anti microbial chg transparent gel pad,breathable transparent film with reinforcing documentation tape strip film coated stabilization border with notch for cvc dressing , 2% chg skin prep 500ml with iso 10993, part 10 ,2010, human cumulative patch irritation test certificate, neutral ph, 2% chlorhexidine root irrigant, 2.0 fr peripheral microcatheter, assorted length and tip shape, 2.1 fr peripheral microcatheter, assorted length and tip shape, 2.5% v/v chg with 70%v/v ethanol ip 500ml chg handrub liquid, 2.5% v/v chg with 70%v/v ethanol ip 50ml chg handrub foam , 20 gm tip load tapered tip microguidewire for peripheral intervention 0.014 inch x 180cm, 20 gm tip load tapered tip microguidewire for peripheral intervention 0.014 inch x 300 cm, 200 ml 4% chg surgical scrub with medical grade foam ptient preop showering kit, 3 x 6 endobag specimen retrieval , 30 g needle, 30 gm tip load tapered tip microguidewire for peripheral intervention 0.018 inch x 180cm, 30 gm tip load tapered tip microguidewire for peripheral intervention 0.018 inch x 300 cm, 3-0 polyglactin double armed suture with spatulated nedle , 30g needle (13mm), 35-40mm standard articulating powered endoscopic linear cutter, "38g needle – 1.5 inch (ultrafine)", 3d extra soft all - in- one coil, thermo mechanically detachable 1.5 mm x 2cm, 3d extra soft all - in- one coil, thermo mechanically detachable 1.5mm x 3cm, 3d extra soft all - in- one coil, thermo mechanically detachable 1.5mm x 4cm, 3d extra soft all - in- one coil, thermo mechanically detachable 1mm x 2cm, 3d extra soft all - in- one coil, thermo mechanically detachable 1mm x 3cm, 3d extra soft all - in- o

CTN :43865533

16 Apr, 2026 NA

Bangalore - Karnataka

Tender For bid to ras bid to ras bid to ras bid to ras supply of binder clip 51 mm , binder clip 41 mm , binder clip 32 mm , binder clip 25 mm , binder clip 19 mm , binder clip 15 mm , box file , brown sheet , calculator , carbon sheet blue , carbon sheet black , cd-ohp marker assorted , damper - moisteners , double hole punch - normal , double hole punch medium , double hole punch heavy duty , double side tape 1 inch , double side tape one and half inch , eraser , file boards a4 size , glue bottle , glue stick , a4 size green note sheet with margin , l shape folder , office tray in-out , paper clip 1 point 1 inch , paper clip 1 point 3 inch , paper clip 2 inch , paper cutter- heavy duty , paper cutter - normal , paper pin t-pins , paper pin all-pins , paper weight - normal , blue gel pen , ball pen blue , ball pen -red , ball pen black , pen stand , pencil , permanent marker , pin holoder - normal , plastic folder , poker , post it pad multicolor , post it pad 75 mm x 75 mm , register 1 quire , register 2 quire , register 3 quire , leather bound ledger 4qrs , leather bound ledger 5qrs , attendance register , rinco folder - a4 size , rubber bands , scale metal-30cm , scale plastic - 30cm , scale plastic -15 cm , scissor - size-5 point 5 inch , scissors - size 9 point 8 inch , scissor - size-7 point 5 inch , scribbling pad , sharpner , single hole punch , single hole punch - heavy duty , skecth pen , stamp pad - small , stamp pad big , stapler pin no - 10 , stapler pin 24-6 , stapler pins no 23- 613 , stepler no - 10 , stepler hp-45p , stepler hl-45 , stapler -hd-1213 , stapler pin remover , tags - fastners size-100-200 mm , tags - fastners size-min 22 inch , white board size 2x3 feet , white board 3x4 feet , white board 4x6 feet , white board duster , white board marker , whitener-correction pen , zip file folders , white thread , transparent tape - one and half inch , transparent tape 01 inch , transparent tape 02 inch , transparent tape 3 ) /bid number: gem/2026/b/7073660 * /dated: 05-02-2026 & & / bid document1 / 98 & & ' ' /item category inch , brown tape 2 inch , brown tape 3 inch , paper tape one and half inch , paper tape 1 inch , paper tape 2 inch , a4 size copier paper- 80 gsm , a3 sheet white paper- 80 gsm , a4 color paper - assorted , register leather bound 6 quire , binding sheet front and back , coil binding metal-plastic , highlighter , a4 bond paper - 100gsm , tape dispenser , 9 volt batteries - standards , aa batteries alkaline , aaa batteries - alkaline , badges cover , badges holder , bed sheet - bed spread , calling bell , candles , cup and saucers , dish washing powder , door mat 2 x3 feet , door mat 4x2 feet , dustbin plastic , duster cloth , electric kettle , electric stove , extension board - minimum six socket , vacuum flask , hose pipe , jute twine , kettle , pad lock 7 lever , magnifying glass , manila rope , match box , metal polish - brasso polish , mosquito coil , mosquito liquid with machine , mosquito machine refill pack , mosquito repellant cream , mud pots , mug plastic , national flag - khadi , pillow , plastic bucket 20 liter capacity , plastic tokens , room freshner , cd-rwrewritable- 700 mb , dvd-rw - rewritable - 4 point 7 gb , sealing lead , sealing wire diameter 0 point 125 mm , tags for badges , tea coaster , tea trays , thermos flask 1 litre , liquid hand wash , towels big size , hand towels , umbrella , wall clock , water jug stainless steel- 2 litre , water glass , water glass bottle , hand torch rechargable , temporary file-folder - without printing , spring files , dvd r-w 8 point 5 gb , water cups - paper , envelop - clothe lined - small , envelop - clothe lined medium , envelop - polythene lined - a4 size , d ring file fc , spring file - solo plastic 2 inch , spring file - solo plastic 4 inch - a4 size , a4 coated paper - certificate 200gsm 300gsm , aa batteries - non alkaline , aaa batteries -non alkaline , 6v batteries for calling bell , hand soap , navtal padlock - 8 leve

Sterilizer Coil Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government / Public Sector