Latest stiffener plate Tenders | Government stiffener plate Tenders

CTN :44784971

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/01/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) special repair 30069003322 bcnm1 (nlb) 2) er 10029695316 boxnr (nlb) steel body 3) wr 10089660538 boxnm1 (nlb) 4) special repair 30069032001 bcnm1 (nlb) 5) special repair 30069003650 bcnm1 (nlb) 6) er 72029661388 bobrnm1 (nlb) 7) er 72029681850 bobrnm1 (nlb) 8) cr 10019601051 boxnm1 (nlb) 9) nr 30039006728 bcnm1 (nlb) 10) se 10079632712 boxnm1 (wm) nb: (1): i) wagons are to be sold without 18 nos. nlb trolleys against special repairl. no. 01 to 09. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 10. iii) wagon special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44784972

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/02/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) se 12079560026 boxnhsm1 (nlb) 2) se 25079662607 boxnr (nlb) steel body 3) se 75079260396 bobsnm1 (nlb) 4) se 75079260365 bobsnm1 (nlb) 5) se 75079216683 bobsnm1 (nlb) 6) special repair 10069649256 boxnm1 (nlb) 7) sc 30099081895 bcnm1 (nlb) 8) se 25079661693 boxnr (nlb) steel body 9) sc 30099060968 bcnm1 (wm) nb: (1): i) wagons are to be sold without 16 nos. nlb trolleys against special repairl. no. 01 to 08. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 09. iii) wagon special repairl no 01 to 09 to be sold without 36 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Central Government/Public Sector

CTN :44792269

13 Apr, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of stiffener plate along with fasteners for front carrier plate of cbc as per rdso drawing no. rdso/cg/drg/24034, alt. 2. item nos`. 1 to 5. note:- (1). stiffener plates shall be as per is:3885 part-2, grade-5 in annealed condition with hardness between 190-245 bhn. (2). 50% of stiffener plates shall have holes with pitch=100+-0.5mm and distance from edge = 25+-1mm, while remaining 50% stiffener plates shall have holes with pitch=90+-0.5mm and distance from edge=30+-01mm. (3). hex head bolt shall be of reputed make: unbrako, tvs, tuff, caparo, sterling, except lps. [ warranty period: 30 months after the date of delivery ]

CTN :44773251

16 Apr, 2026 NA

Izatnagar - Uttar Pradesh

Tender For supply of stiffener plate of front carrier plate for aar-h type cbc with bdg to rdso drg. no. rdso/cg/drg/24034 alt.2 (consisting of 5 items) for make m/s frontier, m/s jupiter, and m/s nwfp. note:- 1.) stiffener plate material & specification shall be as per is:3885 part-2, grade-5 with hardness: 190 to 245 bhn with annealed condition. 2.) unspecified tolerance as per is:2102 (medium) 3.) surface treatment: black e.d coating/black paint after primer 4.) stiffener plates shall have holes with pitch (p) = 90+-0.5mm and distance from edge (a) = 30+-1mm. 5.) fasteners of reputed make: unbrako, lps, caparo, tvs. 6.) for traceability firm initial size should be 5-15 mm. 7) no sharp edges and burrs. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :44761121

14 Apr, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply of set of stiffener plate with fasteners as per rdso drg.no.rdso/cg/drg/ 24034, alt-02. with pitch between holes (p) =100 + / - 0.5 mm & hole distance from edge(a)=25 + / - 01 mm) suitable for (oem-sona blw, sanrok,ftirtipl). note : (1) ''serial number''(starting from 01 to till the last plate sl.no) to be stamped with permanent ink along with mfg. details (as per note 08 of rdso drg.) and size of the pitch. (2). hardness test report (as per note 05 of rdso drg. for each plate duly indicating sl.no to be specified, testing must be done by a laboratory which is having approval of national accreditation board for testing and calibration laboratories (nabl) accredited certified lab and test reports to be sent along with the material. (3) material to be door delivered within 60 days from the date of issue of purchase order. (4) inspection by consignee as per nabl certificate. (warranty period : upto 30 months from the date of delivery.) [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :44761122

14 Apr, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply of set of stiffener plate with fasteners as per rdso drg.no.rdso/cg/drg/ 24034, alt-02. with pitch between holes (p) =90 + / - 0.5 mm & hole distance from edge(a)=30 + / - 01 mm) suitable for (oem-frointer, nwfp,jupiter). note : (1)''serial number''(starting from 01 to till the last plate sl.no) to be stamped with permanent ink along with mfg. details (as per note 08 of rdso drg.) and size of the pitch. (2). hardness test report (as per note 05 of rdso drg. foreach plate duly indicating sl.no to be specified, testing must be done by a laboratory which is having approval of national accreditation board for testing and calibration laboratories (nabl) accredited certified lab and test reports to be sent along with the material. (3) material to be door delivered within 60 days from the date of issue of purchase order. (4) inspection by consignee as per nabl certificate. (warranty period : upto 30 months from the date of delivery.) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44753129

10 Apr, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap condemned unserviceable m.s. steel of girder and columns, beams, angles, plates, verticles, stiffener, stiffener plates, flange etc. released from dismantling of rob 454/1.

Central Government/Public Sector

CTN :44537637

04 Apr, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of 0535 , am5 m tk 601 hpt cap screw pn 536 , am5 m tk 601 hpt grub screw pn 537 , am5 m tk 601 hpt lock nut pn 538 , am5 m tk 601 hpt hex nut pn 716 , am5 m tk 601 hpt inner cas assy fixture , am5 m tk 601 hpt inner cas plug screw , am5 m tk 601 hpt out cas pp hex stud m52 , am5 m tk 601 hpt out cas pp hex stud m45 , am5 m tk 601 hpt fitted key 75x48 pn 10 , am5 m tk 601 hpt fr conn insert a80 pn11 , am5 m tk 601 hpt fr conn insert b80 pn12 , am5 m tk 601 hpt pin dia 30x67 5 pn 14 , am5 m tk 601 hpt inner cas grub screw m6 , am5 m tk 601 hpt inner cas cyl pin dia8 , am5 m tk 601 hpt inner cas sealing fins , am5 m tk 601 hpt inner cas caulking wire , am5 m tk 601 hpt gbc stud m24x113 , am5 m tk 601 hpt gbc cap nut m24 , am5 m tk 601 hpt gbc cylindrical pin , am5 m tk 601 hpt gbc taper pin dia 10 , am5 m tk 601 hpt gbc sealing fins , am5 m tk 601 hpt gbc caulking wire , am5 m tk 601 lpt outer cas stud m33x105 , am5 m tk 601 lpt outer cas stud m33x95 , am5 m tk 601 lpt outer cas stud m33x250 , am5 m tk 601 lpt outer cas stud m33x85 , am5 m tk 601 lpt outer cas hex nut m33 8 , am5 m tk 601 lpt outer cas stud m30x95 , am5 m tk 601 lpt outer cas hex nut m30 8 , am5 m tk 601 lpt front brg pedestal pin , am5 m tk601 lpt front brg pedest key a50 , am5 m tk601 lpt front brg pedest key a80 , am5 m tk 601 lpt fr brg pedestal insert , am5 m tk 601 lpt fr brg pedestal plate , am5 m tk 601 lpt fr brg pedestal washer , am5 m tk 601 lpt damping device , am5 m tk 601 lpt grounding brush , am5 m tk 601 lpt sealing fins at nozzles , am5 m tk 601 lpt caulking wire at nozzle , am5 m tk 601 lpt sealing fin guide blade , am5 m tk 601 lpt caulk wire guide blade , am5 m tk 441 steam chamber seal fin wire , am5 m tk 441 fr st gland seal fin wire , am5 m tk 441 rr steam glandseal fin wire , am5 m tk 441 hpguide blade seal fin wire , am5 m tk 441 comple front oil gland assy , am5 m tk 441 front oil gland scrap ring , am5 m tk 441 rear oil gland scrap ring , am5 m tk 441 esv valve cone pos no 3 , am5 m tk 441 esv valve spindle pos no 4 , am5 m tk 441 esv threaded bush pn 5 , am5 m tk 441 esv bush pos no 6 , am5 m tk 441 esv bush pos no 7 , am5 m tk 441 esv bush pos no 8 , am5 m tk 441 esv threaded bush pn 9 , am5 m tk 441 esv sealing bush pn 10 , am5 m tk 441 esv sealing washer pn 11 , am5 m tk 441 esv bush flange pn 13 , am5 m tk 441 esv ss rod pos no 15 , am5 m tk 441 esv clamping sleeve pn 18 , am5 m tk 601 hpt bush 11 5 pn 15 , am5 m tk 601 hpt washer pn 0041 , am5 m tk 441 esv nut pos no 12 , am5 m tk 441 esv clamping pin pos no 14 , am5 m tk 441 esv ss sht pos no 16 , am5 m tk 441 esv scru slt pos no 17 , am5 m tk 441 esv ring trdl selg pn 19 , am5 m tk 441 esv ring trdl selg pn 20 , am5 m tk 441 esv hyd piston pos no 2 am5-m,tk-601 hpt casing pp hex stud m56, am5-m,tk- 601 hpt insert b80, am5-m,tk-601 hpt rr conn washer pn 0070, am5-m,tk601 hpt rr conn plate pn 74, am5- m,tk-601 hpt esv bush pn 0019, am5-m,tk601 hpt esv stuffing nut pn 0020, am5-m,tk-601 hpt esv valve spindle, am5-m,tk-601 hpt esv packing pn 0030, am5- m,tk-601 hpt casing pp stud m45x385, am5-m,tk-601 hpt casing pp hex nut m45, am5-m,tk-601 hpt casing pp ins washer 46, am5-m,tk-601 hpt esv packing pn 0032, am5-m,tk-601 hpt esv packing pn 0033, am5-m,tk- 601 hpt esv cap nut pn 0039, am5-m,tk-601 hpt esv //bid details 2 / 91 circlip pn 56, am5-m,tk-601 hpt esv ring trdl pn 0061, am5-m,tk-601 hpt esv ring trdl pn 0062, am5-m,tk-601 hpt esv piston, am5-m,tk601 hpt esv cylinder compr sprg, am5-m,tk-601 hpt casing pp hex nut m56, am5- m,tk-601 hpt casing pp ins washer 57, am5-m,tk-601 hpt casing pp hex stud cm56, am5-m,tk-601 hpt casing pp hex nut m56, am5-m,tk-601 hpt casing pp hex stud cm52, am5-m,tk-601 hpt casing pp hex nut m52, am5-m,tk-601 hpt casing pp ins washer 53, am5- m,tk601 hpt esv ring trdl selg statc, am5-m,tk-601 hpt steam strainer assy, am5-m,tk-601 hpt hp gov pin pn 0039, am5-m,tk-601 hpt hp gov ring pn 0040, am5- m,tk-601 hpt hp gov circlip pn 0051

Corporations / Associations / Others

CTN :44675353

18 Apr, 2026 NA

Bangalore - Karnataka

Tender For supply of grounding contact (earth brush) , grounding contact rubbing plate

Central Government/Public Sector

CTN :43710723

31 Mar, 2026 62.16 Lacs

Bangalore - Karnataka

Tender For bid to ras tender for supply of c422lch1025 fabrication and supply of metallic and sheet metal detail parts : : -stiffener plate o b aft lh , stiffener plate o b aft rh , stiffener plate i b aft lh , stiffener plate i b aft rh , stiffener o b fwd lh , stiffener o b fwd rh , stiffener i b fwd lh , stiffener i b fwd rh , stiffener o b aft lh , stiffener o b aft rh , stiffener i b aft lh , stiffener i b aft rh , corrugated sheet eng lh , corrugated sheet eng rh

Stiffener Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Corporations / Associations / Others

Central Government/Public Sector