Web Analytics Made Easy - StatCounter

Stone Aggregate Tenders

Get complete information related to latest Stone Aggregate Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Stone Aggregate Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Stone Aggregate Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :42759661 Due date: 06 Dec, 202506 Dec, 2025 NA
Tender For bid to ras supply of supply and stacking of coarse sand , supply and stacking of stone aggregate 10 mm , supply and stacking of stone aggregate 20 mm , supply and stacking of stone aggregate 40 mm

CTN :43054630 Due date: 15 Dec, 202515 Dec, 2025 NA
Tender For supply of xlpe cables for working voltages from 3. 3 kv up to and including 33 kv as per is 7098 (part 2) (q3) , cable termination kit (v2) (q3) , excavation in trenches not exceeding 1 point 5 meter wide and not exceeding 1 point 5 meter in deep getting out in hard dense soil for stay assembly erection of poles complete , returning filling in including spreading levelling watering and well ramming in layers n exc 25cm thick , removing of excavated material n exc 50m and depositing where directed at a level n exc 1 point 5m above the starting point , supply install testing and commissioning of ht 11 kv 3 phase 50 cycles outdoor type totally enclosed metal clad switchgear complete with vcb having rupturing capacity upto 350 mva , supply and fix cable jointing kit for 11 kv straight through cold shrink 3 core x 120 sqmm complete , material and labour for reinforced concrete pipes 150mm dia class np2 laid and jointed complete with collars for cable protection , supply and install synthetic rubber insulated mats 2 pint 5 mm thick for voltage upto 11kv for electrical purpose suitable for electrical shock and safety of sizes 2m x 1m complete , m and l for pcc 1 column 4 column 8 type d2 using 40mm graded stone aggregate in foundation and mass concrete , m and l for pcc 1column 2 column 4 type b1 using 20mm graded stone aggregate in coping and the like including weathering slightly rounded angles , material and labour for chain link ms galvanisd fencing including line wires any mesh size and type to any type of standards rails straining bolts , m and l cutting the existing bituminous road concrete surface 150 mm thick to the required width and depth for laying of cable protection pipe , m and l for replacement of unserviceable double walled corrugated hdpe duct pipe of 110mm outer dia , m and l for providing cable route markers cast iron round shaped disc of 150mm dia 3mm thick embossed with marking ht cable mounted on angle iron , m and l for earthing with galvanised steel earth electrode plate of size 600x600x6mm thick ) /bid number: gem/2025/b/6881369 * /dated: 04-12-2025 & & / bid document1 / 20

CTN :43054769 Due date: 15 Dec, 202515 Dec, 2025 NA
Tender For supply of xlpe cable for working voltages up to and including 1. 1 kv as per is 7098 (part 1) (q2) , dismantling and taking down of concrete of any description and in any position complete , m and l for pcc 1 column 4 column 8 type d2 40mm graded stone agg , m and l for pcc 1 column 2 column 4 type b1 using 20mm graded stone aggregate in coping and the like including weathering slightly rounded angles , disconnecting of ht lt cables earth strips of declared ber transformers , s and f of outdoor non sealed type mineral oil distribution transformer step down copper wound having primary side voltage at 11 kv 3phase , 433 volts at 50 hz frequency of capacity 250 kva , 433 volts at 50 hz frequency of capacity 75 kva , m and l for earthing complete with gi earth plate as electrode of size 600x600x6mm thick , m and l of chemical earthing complete with 50 mm dia copper pipe filled with chemical sulphate , material and labour for gi earth strip of size 32x6mm thick , material and labour for copper earth strip of size 20x3mm thick , dismantling taking out carefully old ug cable from trenches after disconnecting from oh conductors , taking down of existing unsv hdpe pipe of size 90mm outer dia from existing locations , m and l for replacement double walled corrugated hdpe duct pipe of 90mm outer dia , m and l for replacement double walled corrugated hdpe duct pipe of 50mm outer dia complete ) /bid number: gem/2025/b/6945591 * /dated: 04-12-2025 & & / bid document1 / 26

State Government

CTN :43029494 Due date: 23 Dec, 202523 Dec, 2025 42.00 Lacs
Tender For supplying and stacking various type of building, road & otherconstruction meterials, at various places of taluka bhesan undertaluka panchayat, bhesan under mgnrega( annual unit rate) - providing and fixing 35 mm thick shutters for doors,windows and clear story windows cluding an odised alluminium butt hinges with necessary screws. (a) indianteak wood (ii) fully glazed., steel hysd, battens 75 mm x 100 mm, binding wires, c.i. cover with frame 300mm x 300mm, cement (53 grade), coarse sand, common burnt clay bricks modular size 20x10x10 cm, crushed stone aggregate for hard quality 6 to 10mm size, crushed stone aggregate for hard quality 10 to 20mm size, crushed stone aggregate for hard quality 20mm size, crushed stone aggregate for hard quality 40mm size, crushed stone aggregate for hard quality 40mm to 63mm size, distemper primer, dry distemper, enamel paint, enamel primer, fine sand, flat back wash basin colour glazed 450 x 300 size, g.i sheet 0.8 mm thick corrugated class-3, g.i. barbed wire, g.i. j or l hooks, galvanised mild steel tube medium grade 32mm dia, gun metal screw down bib tap-15 mm dia, gun metal screw down bib tap-20 mm dia, guard stone, hand broken stone aggregate 25mm size to 90mm size, hand broken stone aggregate 40mm size to 63mm size., hard marrum, p.v.c bib tap 15mm. dia, p.v.c bib tap 20mm. dia, plastic emulsion paint, polished kota stone slab green. 25 mm thick, pre-cast cement concrete tiles, quarry spall., precast rcc jali 100 mm thick, r.c.c heavy duty non-pressure pipe i.s. class np-3 900mm dia., r.c.c heavy duty non-pressure pipe i.s. class np-3 600mm dia., r.c.c heavy duty non-pressure pipe i.s. class np-3 1200mm dia., s.w. gulley trap 150mm x 100 mm size., s.w. guly trap 100 x 100 mm size, stone dust, synthetic enamel paint, terrazo tiles light shade 20 mm thick, urinal flat back, water proofing cement paint, white bela stone, white paint, white vitriousching w.c. sqatting pan (india type), precast concrete blocks (1:3:6) (39 x 20 x 19 cms)

CTN :43032343 Due date: 12 Dec, 202512 Dec, 2025 2.05 Lacs
Tender For supply of material for construction construction of crematorium in shanavaspura village - broken stone aggregate 40 mm size ajskud01, broken stone aggregate 20 mm size ajskud01, broken stone aggregate 12 mm to 10 mm size ajskud01, coarse sand zone iii ajskud01, portland cement ajskud01, mixer concrete 1 cum capacity ajskud01, add watering charges at 1 percentage on material ajskud01, size stone 20 x 20 x 25 cms ajskud01, bond stone 20 x 20 x 45 cm ajskud01, boulders ajskud01, mixer concrete small used in culvert ajskud01, tmt bars fe 500 ajskud01, binding wire ajskud01, plasticizer per super plasticizer ajskud01, burnt bricks class 35 non modular ajskud01, silver oak or equivalent planks 38 mm thick ajskud01, jungle wood runners and planks ajskud01, ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length at 4.5 kg per metre ajskud01, ms angle iron 40mm x 40mm x 6mm 23 metre in length at 3.5 kg per metre ajskud01, gusset plates 6 mm thick ajskud01, base plate or base plate ajskud01, anchor bolts 750mm ajskud01, corbon electrodes ajskud01, welder grade i ajskud01, hom of welding and grinding machine ajskud01, add ajskud01, hom of cutting and grinding machine ajskud01, ready mix primer paint ready mix red lead paint ajskud01, painter class i ajskud01, enamel metal paint ajskud01, tools and plants and electrical charges at 2 percentage ajskud01, unit cost as per the specification ajskud01, fifty mm dia ms hollow pipe b class 14 gauge ajskud01, sixteen x sixteen mm ms square rod ajskud01, thirty six mm x six mm ms plates ajskud01, forty x six mm ms plates ajskud01, cast iron spike ajskud01, ball bearing hinges heavy duty ajskud01, anticorrosive bituminous paint black ajskud01, mechanic class ii or mechanic hmp grade i or eme grade ajskud01, hom of cutting and grinding machine 1 ajskud01, display board or cib ajskud01

State Government

CTN :42966383 Due date: 09 Dec, 202509 Dec, 2025 30.00 Lacs
Tender For corrigendum : name of work:- rmc to nagpura. - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special a

CTN :42620789 Due date: 11 Dec, 202511 Dec, 2025 NA
Tender For corrigendum : construction of equipment room at nrl rt - civil, structural & architectural, earth work in excavation (refer specification no. c-spc-103), earth work in excavation below ground level for all kinds of works in all types of soils except soft rock and hard rock as classified in specification for a depth upto 1.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting., for depth beyond 1.5m and upto & inclusive of 3.0m., earthwork in filling by excavating the earth from borrow areas arranged by contractor for all leads, transporting the earth from borrow area including cleaning & stripping the earth at borrow areas, breaking clods, loading, unloading and laying at all depths and heights in layers of thickness not exceeding 15 cms., watering, rolling and ramming by manual methods/mechanical compactors to achieve 90% of the maximum laboratory dry density, dressing, trimming, levelling the top surface etc. in foundations, plinths, trenches etc. all complete., backfilling after execution of the work to proper grade and level with selected materials from available excavated soil from spoil heaps, including re-excavating the deposited soil excavated earlier, breaking clods, laying at all depths and heights in layers of thickness not exceeding 15 cms. watering, rolling and ramming by manual methods/ mechanical compactors to achieve 90% laboratory maximum dry density, dressing, trimming etc. in foundations, plinths, trenches, pits etc. all complete., transporting and disposing the surplus earth and debris including shrubs and vegetations from construction area to areas anywhere outside the plant boundary including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. for carting on the basis of truck measurements (volume of truck reduced by 30% for voids) disposal area s outside plant boundary to be arranged by the contractor .royalty as applicable for disposal outside plant limits to be borne by the contractor., plain & reinforced cement concrete (refer specification no. c-spc-104), providing and laying plain cement concrete for all depths below and upto plinth level in foundations,drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete of nominal mix 1:5:10 by mass (1 cement: 5 coarse sand: 10 crushed stone aggregates/gravels) with 40mm and down size graded crushed stone aggaregates/gravels.(all materials including cement supplied by contractor at their cost), providing and laying reinforced cement concrete of m-30 grade with 20mm and down size graded crushed stone aggregates/gravel in sub-structure of all types e.g. foundations, footings, raft, beams, slabs, pile caps, retaining walls, jambs, counterforts, buttresses, trenches, manholes,pipe encasement, catchpits, drains, rcc pits, equipment/machine foundations, pedestals, pipe sleepers, columns, plinth beams, suspended floors, beams, staircases, landings, steps, brackets etc. (including single pour concreting upto 250m3), including cost of admixtures if used,providing pockets, openings, recesses, chamfering etc., wherever req

CTN :42702298 Due date: 07 Dec, 202507 Dec, 2025 9.92 Lacs
Tender For corrigendum : supply of materials for roads works of anthapura gp mgnrega works 2025-26 - form work at1percentage 1432bnstms143sb91259125, de bonding strips 3.75 m 1432bnstms143sb91259125, bituminous sealant 800 ml per joint 23 joints 1432bnstms143sb91259125, polythene sheet 125 mm micron 1432bnstms143sb91259125, air compressor 1 hour initia plus1 hour final 1432bnstms143sb91259125, concrete jiont cutting machine for initial and final cuts 1432bnstms143sb91259125, plate vibrator 1432bnstms143sb91259125, screed vibrator 1432bnstms143sb91259125, needle vibrator 1432bnstms143sb91259125, water tanker 1432bnstms143sb91259125, vibratory roller 8 tonne 1432bnstms143sb91259125, water tanker 6 kl capacity 1432bnstms143sb91259125, concrete mixer 0.4 bar0.28 cum capacity 1432bnstms143sb91259125, water1432bnstms143sb91259125, gravel 2.36 mm bar murrum 1432bnstms143sb91259125, granite metal 40 mm 1432bnstms143sb91259125, granite metal 20 mm 1432bnstms143sb91259125, crushed stone course aggregate 53 1432bnstms143sb91259125, crushed stone chippings 13.2 mm 1432bnstms143sb91259125, broken stone aggregate 40 mm size 1432bnstms143sb91259125, broken granite metal 20 mm 1432bnstms143sb91259125, broken granite metal 10 mm 1432bnstms143sb91259125, coarse sand zone 3 1432bnstms143sb91259125, plasticizer bar super plasticizer 1432bnstms143sb91259125, portland cement 1432bnstms143sb91259125

CTN :42936075 Due date: 06 Dec, 202506 Dec, 2025 4.31 Lacs
Tender For corrigendum : supply of school kitchen at sanknoor gp - sankitcmrbroken stone aggregate 40 mm size, sankitcmrhom of vibrator 0.71 days, sankitcmrbroken stone aggregate 20 mm size, sankitcmrmixer concrete - 1 cum capacity, sankitcmrbroken stone aggregate 12 mm to 10 mm size, sankitcmrrubble stones, sankitcmrstone chistler class ii, sankitcmrmason class ii with tools, sankitcmrboulders, sankitcmrbond stone 20 x 20 x 45 cm, sankitcmrsize stone 20 x 20 x 25 cms, sankitcmrbinding wire, sankitcmrtmt bars fe 500, sankitcmrcasurina poles 75 to 100 mm dia, sankitcmrsilver oak or equivalent planks 38 mm thick, sankitcmrjungle wood runners and planks, sankitcmradd watering charges at 1 per on labour, sankitcmradd sundries charges at 1 per on labour, sankitcmradd sundries charges at 2 per on material, sankitcmrcasurina poles 100 - 150 mm, sankitcmrbrick, sankitcmrpigment, sankitcmrmixer concrete small used in culvert, sankitcmrcoarse sand zone iii, sankitcmrportland cement, sankitcmrcudddapah slab 2.5 cms thick, sankitcmrprimer, sankitcmradd brush, putty, sand paper, roller at 1per on cost of paint, sankitcmrwater proofing cement paint, sankitcmrhom of machinaries for planing, sankitcmradd cutting and other wastage 5per, sankitcmrmathi/nandi wood planks for panels 25 mm thick, sankitcmrmathi/nandi wood scantling, sankitcmradd wire brush, fine steel wool, putty, sand paper, at 3per on cost of paint, sankitcmrready mix primer paint ready mix red lead paint, sankitcmradd hom of welding and grinding machine at 4per on material, sankitcmrwelder grade i, sankitcmrfitter class i, sankitcmrms flat, sankitcmrm.s rods, sankitcmradd handling , loading and unloading at 1per on material, sankitcmradd hom of welding and grinding machine at 2per on material, sankitcmrfabricator, sankitcmr5.50 mm thick plain glass, sankitcmrchrominum plated screws, sankitcmrcleat angles, sankitcmrpvc beading, sankitcmrrubber beading for shutters beading, sankitcmrnylon rollers, sankitcmrpowder coated 60 to 70 micron, sankitcmradd brush, putty, sand paper at 5per on cost of paint, sankitcmrliquid wood filler, sankitcmradd handling , loading and unloading at 2per on material, sankitcmradd providing and removing scaffolding at 3per on labour, sankitcmrpainter class 1, sankitcmradd brush at 1per on cost of paint, sankitcmrenamel metal paint, sankitcmrmason class i with tools , sankitcmrlime, sankitcmrpvc pipe of 4kg cum 63 mm, sankitcmradd watering charges at 1 per on material, sankitcmradd sundries charges at 1 per on material, sankitcmrlicenced plumber with tools, sankitcmrlead or pvc connection pipe 32mm dia for wash basin, sankitcmrbrass stop cock, sankitcmrcp brass waste 32 mm of standard pattern, sankitcmrcp brass chain with plug, sankitcmrcopper plated brass piller tap 15mm, sankitcmrwhite vitreous china clay flat back wash basin size 630 x 450mm, sankitcmrhandling loading and unloading 3per on material, sankitcmrlabour charges for lifting and placing in position and making connection at 7 per on material, sankitcmrpolyenthylene water storage tank of specified capacity l

CTN :43026998 Due date: 23 Dec, 202523 Dec, 2025 NA
Tender For supply of galvanised steel chain link fence , laip 2. 10mtr long , 10 gaze wire , cement , coarse sand , 20mm stone aggregates , installation of chain link fence
 Loading, Please wait...

Connect us via What's Up