Latest stone carving Tenders | Government stone carving Tenders

State Government

CTN :43015698

08 Dec, 2025 4.95 Lacs

Mandi - Himachal Pradesh

Tender For restoration of rain damages on various roads in nasloh section under kamand sub-division, hppwd, kamand. (sh:- hiring of earth cutting/ excavating machine for removal of slips/ dressing of berms, clearance of side drains etc. (1) bhiuli tung road. (2) bijani nasloh road and others road etc.).

CTN :42998152

22 Dec, 2025 NA

Jaisalmer - Rajasthan

Tender For supply of electrical and mechanical cooling appliances stores c c -supply install testing and commissioning of tower ac of cap 2tr cap moisture removal 2 point 2 ltr per hr min air flow 630 cfm 230v 50hz single phase make lg blue star hitachi voltas iyod equivalent , supply and fixing heavy duty copper pipe 12mm or 1 oblique 2 inch dia bore thickness not less than 0 point 70mm complete incl brazing welding nuts bolts and screws of required size complete , supply and fixing heavy duty copper pipe 6mm or 1 oblique 4 inch dia bore thickness not less than 0 point 70mm complete incl brazing welding nuts bolts and screws of required size complete , supply and fixing new nityrile rubber insulation for copper pipe suitable dor split ac of capacity from 1 point 5 to 2 tr complete all as directed by engr in charge , supply and fixing ceiling fans complete with blades down rods elect regulator and accessories 230v 1200mm sweep min fan speed 370 rpm make crompton orient anchor or equivalent , supply and fixing exhaust fan steel body ac single phase 230v size 300mm sweep with blades and frames and louvers make compton orient anchor or equivalent , s and f sheet metal enclosure with 2 pin and earth plug and socket complete with one single pole mcb of 20 amp capacity complete all as specified and directed by engr in charge , s and f for wiring from indoor to outdoor unit size 2 point 5sqmm pvc insulated multistranded frls four core round cable incl fixing of thimbless for split type ac 1 point 5 or 2tr , m and l for submain wiring with 2 single core pvc insulated unsheathed multi stranded copper conductor frls wire 6sqmm 1100v grade incl 6sqmm pvc insulated multi stranded , supply fixing new pvc drain pipe 15mm dia with coupler joint for split or window ac complete all as specified and as directed , providing and making one number hole of upto 20 inch length 2 diameter in existing wall or slab rcc bricks stone by means of core cutting machine incl proper fixing of machine , supply and fixing weather protection cover for outdoor ac unit heavy gauge min 0 point 5mm gi sheet with antirust coating sloping triangular top front both sides covered supported on ms pipe , supply and fixing outdoor unit stand for 1 point 5tr or 2tr type ac complete all as specified and as directed

State Government

CTN :42915120

03 Dec, 2025 90.65 Lacs

Kota - Rajasthan

Tender For - rmc to mawasa - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator machine complete wi

State Government

CTN :42884664

08 Dec, 2025 1.66 Crore

Guntur - Andhra Pradesh

Tender For removal of deposited earth/silt in bed for kondaveeti vagu from km 14.000 near neerukonda village to outfall sluice of kondaveeti vagu near undavalli pumping station with in capital city amaravati , andhra pradesh

State Government

CTN :42966383

04 Dec, 2025 30.00 Lacs

Kota - Rajasthan

Tender For name of work:- rmc to nagpura. - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator mach

State Government

CTN :42990247

15 Dec, 2025 4.65 Lacs

Raipur - Chhattisgarh

Tender For removal of unwanted earth besides the rail track from ch-11200 to 12000 in cutting section of rail line of 2x500mw, abvtps, cspgcl, janjgir-champa.

Central Government/Public Sector

CTN :42678848

03 Dec, 2025 45.40 Lacs

Multi City - Multi State

Tender For corrigendum : removal of debris spoils earth concrete blocks and other wastes from foundry and forge division hal bc

State Government

CTN :42905414

03 Dec, 2025 93.24 Lacs

Kota - Rajasthan

Tender For digod to dobari - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, dismantling of flexible pavements dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per morth specification clause 202 by mechanical means bituminous courses & granular courses, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (penetration grade/modified bitumen) binder using plastic waste providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing of aggregate and plastic waste cutting in a hotmix plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. (bitumen vg-30) (by mechnical means) waste plastic @ 8% of bitumen. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, providing and erecting typical citizens information board as per approved drawing & specification made of two ms sheet of

Central Government/Public Sector

CTN :42954907

18 Dec, 2025 17.12 Lacs

Kolhapur - Maharashtra

Tender For custom bid for services - hiring of support services required for ils installation; 1. the scope of works involves hiring of suv vehicles, jcb, poklane, gas welding machine, dgps, total station etc as per the list of items. 2. construction of earth pit inspection chambers. 3. the services are required during installation of ils at kolhapur airport. 4. the details of services required are as follows: 1 hiring of passenger vehicle with driver 02 nos of suv type vehicle, with air conditioning and driver. should be able to carry 7 persons comfortably (excluding driver). required for total 32 days. 2 provision of 08 numbers of manpower per day 08 nos of manpower (labourers) preferably male to be deployed at site per day for carrying out works. required for total 32 days. 3 provision of crane/hydra with operator with 80 feet boom and at last boom it should have load capacity of 1.5 tonnes required for 10 days as and when required. 4 provision of jcb machine with operator required for carrying out excavation work required for total 10 days as and when required 5 provision of dgps (along with cad software and gps coordinate to cartesian coordinate conversion software) with operator is required for survey work. required for total 3 days as and when required 6 hiring of total station (survey equipment) total station with accessories for surveying with trained surveyor. required for total 6 days as and when required 7 provision of 02 nos of hammer drill machines with operator to be provided with 14,18 and 20 mm drill bits required for 06 days as and when required 8 hiring of gas welding gas welding machine with accessories/consumables and trained welder. required for total 7 days as and when required. 9 hiring of arc welding arc welder machine with accessories/consumables trained welder. required for total 3 days as and when required 10 provision of transport vehicle (small) for transporting materials to work sites. camper type vehicle to be provided required for total 10 days as and when required 11 provision of heavy lorry trucks/ dumper for transporting the materials and goods to the worksite truck lorry and dumper to provided required for total 10 days as and when required 12 hiring of hydraulic machine/poclaine machine with hydraulic driller for digging hard rocks along with trained operator. required for total 8 days as and when required 13 provision of soil compactor with operator for compacting the refilled surfaces, including removal of malba, rocks, levelling the surface, etc. to be provided with operator required for total 4 days as and when required 14 construction of erath pit inspection chamber to be constructed from brick, mortar having smooth cement plaster on exposed walls. the outer dimensions 450mm x450mmx 450mm. the top surface to be flushed with ground and to be covered with suitable fiber cover having load capacity 40 ton..

CTN :42620789

04 Dec, 2025 NA

Dibrugarh - Assam

Tender For corrigendum : construction of equipment room at nrl rt - civil, structural & architectural, earth work in excavation (refer specification no. c-spc-103), earth work in excavation below ground level for all kinds of works in all types of soils except soft rock and hard rock as classified in specification for a depth upto 1.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting., for depth beyond 1.5m and upto & inclusive of 3.0m., earthwork in filling by excavating the earth from borrow areas arranged by contractor for all leads, transporting the earth from borrow area including cleaning & stripping the earth at borrow areas, breaking clods, loading, unloading and laying at all depths and heights in layers of thickness not exceeding 15 cms., watering, rolling and ramming by manual methods/mechanical compactors to achieve 90% of the maximum laboratory dry density, dressing, trimming, levelling the top surface etc. in foundations, plinths, trenches etc. all complete., backfilling after execution of the work to proper grade and level with selected materials from available excavated soil from spoil heaps, including re-excavating the deposited soil excavated earlier, breaking clods, laying at all depths and heights in layers of thickness not exceeding 15 cms. watering, rolling and ramming by manual methods/ mechanical compactors to achieve 90% laboratory maximum dry density, dressing, trimming etc. in foundations, plinths, trenches, pits etc. all complete., transporting and disposing the surplus earth and debris including shrubs and vegetations from construction area to areas anywhere outside the plant boundary including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. for carting on the basis of truck measurements (volume of truck reduced by 30% for voids) disposal area s outside plant boundary to be arranged by the contractor .royalty as applicable for disposal outside plant limits to be borne by the contractor., plain & reinforced cement concrete (refer specification no. c-spc-104), providing and laying plain cement concrete for all depths below and upto plinth level in foundations,drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete of nominal mix 1:5:10 by mass (1 cement: 5 coarse sand: 10 crushed stone aggregates/gravels) with 40mm and down size graded crushed stone aggaregates/gravels.(all materials including cement supplied by contractor at their cost), providing and laying reinforced cement concrete of m-30 grade with 20mm and down size graded crushed stone aggregates/gravel in sub-structure of all types e.g. foundations, footings, raft, beams, slabs, pile caps, retaining walls, jambs, counterforts, buttresses, trenches, manholes,pipe encasement, catchpits, drains, rcc pits, equipment/machine foundations, pedestals, pipe sleepers, columns, plinth beams, suspended floors, beams, staircases, landings, steps, brackets etc. (including single pour concreting upto 250m3), including cost of admixtures if used,providing pockets, openings, recesses, chamfering etc., wherever req

Stone Carving Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors