Latest stone chipping Tenders | Government stone chipping Tenders

CTN :40506589

05 Jun, 2025 15.67 Lacs

Multi City - Karnataka

Tender For supply of materials to formation of murrum road at nagaral village sc kere to kittur rani channamma school under nidagundi village. - nid3-display board / cib, nid3-rcc pipes np3 600 mm dia including collars, nid3-coarse sand (zone iii), nid3-portland cement, nid3-rcc pipes np3 900 mm dia including collars, nid3-crushed stone chippings 13.2 mm, nid3-granite metal 20 mm, nid3-granite metal 40 mm, nid3-crushed stone course aggregate 53, nid3-vibratory roller 8 tonne, nid3-water tanker, nid3-gravel 2.36 mm/murrum, nid3-water, nid3-tractor - 40 hp

CTN :40537574

06 Jun, 2025 4.67 Lacs

Belagavi - Karnataka

Tender For supply of materials for improvements of smashan of survey no 313 in kudremani village - fitter(grade1).,., mason (brick layer) ist class.,., carpenter 2nd class.,., mason (brick layer )2nd class.,., air compressor (1 hour initial + 1 hour final), concrete jiont cutting machine for initial and final cuts,., plate vibrator having 3 ton compaction force.,, screed vibrator .,, needle vibrator.,, super plasticizer admixture is marked as per 9-103, joint sealant,, sealant primer,, seperation membrane of impermeable plastic sheeting 125 micron thick, coarse aggreages 12 mm,.,, plate vibrator having 3 ton compaction force,, mason class i (with tools).,.,, cobble stones of 75mm thick,, crushed stone chippings 13.2 mm.,, granite metal 20 mm.,, granite metal 40 mm.,, crushed stone course aggregate 53.,, vibratory roller 8 tonne,., water tanker,, gravel 2.36 mm/murrum,, water.,., tractor - 40 hp.,, laboratory asst. (sslc passed)/mate/supervisor,, unit cost as per the specification,, enamel metal paint.,, painter class i.,, ready mix primer paint (ready mix red lead paint)., hom of cutting and grinding machine.,, add,, hom of welding and grinding machine.,, welder grade 1., corbon electrodes.,, anchor bolts 750mm.,, base plate/ base plate, gusset plates 6 mm thick., ms angle iron 40mm x 40mm x 6mm, 23 metre in length at 3.5 kg per metre,., ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length at4.5 kg per metre, binding wire,., tmt bars fe 500,., mixer (concrete small used in culvert.), burnt bricks class 35 (non modular).,, casurina poles 100 - 150 mm.,, hom of vibrator 0.71 days.,, plasticizer / super plasticizer.,., casurina poles 75 - 100 mm dia., jungle wood runners and plank.,, silver oak, or equivalent planks 38 mm thick.,, mixer (concrete) - 1 cum capacity.,, portland cement,., coarse sand (zone iii),, broken stone aggregate 12 mm to 10 mm size,, broken stone aggregate 20 mm size,, broken stone aggregate 40 mm size

CTN :40561375

05 Jun, 2025 76.69 Lacs

Mau - Uttar Pradesh

Tender For construction of pathway railing albeta marble and stone chipping at ward no 5 sahadatpura purvi chakmenhdi aarazi no 81 pokhra

CTN :40514350

06 Jun, 2025 7.92 Crore

Jhajha - Bihar

Tender For mr-n/25-26/jhajha/02 - basbutiya to basahara road, providing & fixing of working benchmark pillars 01 nos. per km & 04 nos. of reference pillars required for 1 km. as per drawings given and direction of e/i, clearing and grubbing road land ( by manual means) including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of e/i, scrarifying existing bituminous surface to a depth of 150 mm and disposal disposal of scrarified materials with a lift upto 3m and lead upto 1000m as per technical specification clause 301.4, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m & 100 m as per technical specification clause 303.1. (including royality & labour cess)., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.3 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., providing and laying bituminous macadam with 100-120 tph hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of dry lean concrete sub base over a prepared sub grade with coarse and fine aggregate conforming to is 383 , the size of coarse agg. not exceeding 25mm , agg. cememt ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 , cement content not to be less tha

State Government

CTN :40489453

04 Jun, 2025 29.52 Lacs

Gandhinagar - Gujarat

Tender For supply of different type of machine crushed black trap aggregate material from approved quarry to government hot mix plant site at chiloda district gandhinagar. supply machine crushed b.t. stone aggregates 25.00 to 35.00 mm size metal of approved quality to government hot mix plant at chiloda.

State Government

CTN :40489455

04 Jun, 2025 49.70 Lacs

Gandhinagar - Gujarat

Tender For supply of different type of machine crushed black trap aggregate material from approved quarry to government hotmix plant site at chiloda. district gandhinagar.supply machine crushed b.t. stone aggregates 19.00 to 26.50 mm size kapchi of approved quality to government hot mix plant site at chiloda district gandhinagar..

State Government

CTN :40489456

04 Jun, 2025 49.15 Lacs

Gandhinagar - Gujarat

Tender For supply of different type of machine crushed black trap aggregate material from approved quarry to government hot mix plant site at chiloda. district gandhinagar.supply machine crushed b.t. stone aggregates 13.20 mm to 19.00 mm size of approved quality to government hot mix plant site at chiloda district gandhinagar.

CTN :40402680

11 Jun, 2025 NA

Baramulla - Jammu And Kashmir

Tender For supply of sand and crused stone - m sand confirming to is 383-2016 specification for coarse and fine aggregates free fromadherent as per tech att , aggregate 20mm stone aggregate to be crushed rock or gravel 20mm graded confirming to relevant is and as per tech spec , aggregate 40mm stone aggregate to be crushed rock or gravel 40mm graded confirming to relevant is and as per tech spec , ms binding wire 0.9mm as per tech spec , rapidite quick setting liquid as per tech spec

CTN :40404659

11 Jun, 2025 NA

Kupwara - Jammu And Kashmir

Tender For supply of aggregate - m sand confirming to is 383-2016 specification for coarse and fine aggregates free fromadherent as per tech att , aggregate 20mm stone aggregate to be crushed rock or gravel 20mm graded confirming to relevant is and as per tech spec , aggregate 40mm stone aggregate to be crushed rock or gravel 40mm graded confirming to relevant is and as per tech spec , ms binding wire 0.9mm as per tech spec , rapidite quick setting liquid as per tech spec

Stone Chipping Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government