Latest stone cutter Tenders | Government stone cutter Tenders

State Government

CTN :41043247

18 Jul, 2025 1.15 Lacs

Alappuzha - Kerala

Tender For 1.provision includes laying of boundary stones in hed boundary at chethy fishing harbour 2.earthwork excavation for foundation for rcc post 3.topo survey of the area 4.provision of tree cutting for ensuring line of sight

State Government

CTN :41038575

21 Jul, 2025 6.87 Lacs

Sirmour - Himachal Pradesh

Tender For construction of rcc intake chamber 2 nos, laying jointing of gms (m) pipe, construction of protection wall and cutting work at various rds

CTN :41037767

01 Aug, 2025 NA

Karwar - Karnataka

Tender For construction of protective works with gabion wall and rcc drain at kulai cutting bet km 736/2-5(east) under sse/p/ud section

State Government

CTN :41021561

16 Jul, 2025 9.67 Lacs

Agartala - Tripura

Tender For emergency maintenance of katakhal from chandrapur to radhanagar rcc bridge during the year 2025_26 _ cleaning garbage and silt and jungle cutting at river site etc. under water resource sub_division agartala .

State Government

CTN :41021563

16 Jul, 2025 9.69 Lacs

Agartala - Tripura

Tender For emergency maintenance of katakhal from radhanagar rcc bridge to ranjitnagar steel bridge during the year 2025_26 _ cleaning garbage and silt and jungle cutting at river site etc. under water resource sub-division agartala

CTN :40997030

14 Jul, 2025 NA

Multi City - Multi State

Tender For supply, erection, testing & commissioning of i.20 mtr. long high mast tower hot dip galvanise d flange mounted 20 side polygonal tapered type in 2 sections along with feeder pillar box ii. rcc foundatio n suitable for 20 mtr. high mast tower.iii. astronomical timer panel for each tower iv.200 w flood light lumi naire 12 nos. for each tower, v. 5 core 4 sq mm copper cable 30 mtr. for each tower, vi. transport, cutting, erection of 2 mtr (rly supplied) rly pole 8 nos. for each tower, vii. 6 sqmm (7/19) stainless steel wire rope 2 5 mtr for each tower, viii. earthing as per railway's drawing 03 nos. for each tower. supply & erection of m aterials shall be done as per ser/hq specification attached for high mast tower, astronomical timer panel, flood light luminaire, earthing, control panel etc. gtp & tentative gad required along with the bid offer.ma ke of high mast tower: bajaj / transrail /utkarsh / philips /jindal/ bpp / surya.make of tmt bar: tata / jindal / srmb/ mongia or equivalent make as approved by dee(g)/ckp or his authorised representative. the firm has to submit technical parameters of flood light as per cege/grc's specification no. ser/elec/g s/description/ledflood light/rev-0/oct 2024. make of cable: havells/ finolex/ polycab/ anchor or equival ent make as approved by dee/g/ckp. [ warranty period: 60 months after the date of delivery ]

CTN :40985795

28 Jul, 2025 4.33 Lacs

Mansa-P - Punjab

Tender For dnit for supplying, laying, jointing, cutting 800 mm id rcc np3 pipe and construction of manhole and all other works contingent thereto at budhlada distt. mansa.

Central Government/Public Sector

CTN :40964846

25 Jul, 2025 NA

Kanchipuram - Tamil Nadu

Tender For supply of anchor smart surface pilot buzzer door bell 8374 or equivalent make ofhavells/legrand as approved by engineer-in-charge , roma make cat- no 21554 10a bell push or equivalent make of havells/legrand as approved by engineer-in-charge , anchor roma classic 2 module 5 step fan regulator white or equivalent make of havells as approved by engineer in charge , anchor roma classic 1 module 4 step fan regulator white or equivalent make of havells as approved by engineer in charge , anchor 30238wh 3 module pvc plate or equivalent make ofhavells/legrand as approved by engineer-in-charge , anchor roma classic make 12 module modular cover plate of white colour , anchor roma classic make 2 module modular cover plate of white colour , anchor roma blank plate single pole 21598 or equivalent make of havells/legrand as approved by engineer-in-charge , anchor roma classic make 6 module modular cover plate of white colour , anchor roma classic make 8 module modular cover plate of white colour , anchor roma 6 module surface box or equivalent make of havells as approved by engineer in charge , havells make crabtree model 10 amp modular 10 amp socket , legrand make cat no 5 552 51 32a 440 volt 3 pole and earth industrial socket with top complete or equivalent make of havells/anchor as approved by engineer-in-charge , stanley make cat no. 10-143-s basic snap-off blade knife 18 mm for electrician or equivalent make of taparia as approvaed by engineer-in-charge , havells make mirror light 10w led 600mm or equivalent make of phillips/bajaj as approved by engineer-in-charge , havells 10w led batten 300mm or equivalent make of phillips/bajaj as approved by engineer-in-charge , arihant or equivalent make as approved by engineer-in-charge pvc cassing capping 20mm of length 03 mtr , arihant or equivalent make as approved by engineer-in-charge pvc cassing capping 25mm of length 03 mtr , 32a standard single phase 05hp motor starter of havells or equivalent make of standard/l&t as approved by engineer-in-charge , havells outrider 10 w rechargeable led hand torch lhextdpgen1k010 , steelgrip pvc eleectrical insulation tap 20mm wide 10mtr long in various colours of black red blue yellow , legrand make 10 amp single pole miniature circuit breaker 10ka or equivalent make of havells/schinder as approved by engineer in charge , legrand make 16 amp single pole miniature circuit breaker 25ka or equivalent make of havells/schinder as approved by engineer in charge , legrand make 20 amp single pole miniature circuit breaker 25ka or equivalent make of havells/schinder as approved by engineer in charge , legrand make 16 amp douple pole miniature circuit breaker 25ka or equivalent make of havells/schinder as approved by engineer in charge , legrand make 20 amp douple pole miniature circuit breaker 25ka or equivalent make of havells/schinder as approved by engineer in charge , legrand make 40 amp douple pole miniature circuit breaker 25ka or equivalent make of havells/schinder as approved by engineer in charge , legrand make cat no 420 093 mccb 4 pole 63 amp rating 36ka or equivalent make of havells/schinder as approved by engineer-in-charge , c&s winbreak make 250a 4 pole 35ka module case circuit breaker or equivalent make of havells/legrand as approved by engineer incharge , taparia make hammer rcc drilling bit of size 6 mm or equivalent make of bosch/hilti as approved by engineer in charge , taparia make cat no-dbs-4 diamond blade of size 10mm or equivalent make of bosch/hilti as approved by engineer-in-charge , taparia 355 mm 14 inch/ dia 2-1/2 mm thickness cut-off wheel cowg 2bl4/ steel cutting blade , taparia 110 mm / dia 2-1/2 mmthickness cut-off wheel cowg 2bl4/ steel cutting blade , taparia make line tester cat no 815 has high qualityand cellulose acetate plastic handle fully insulated blade , hexa blade 12 inch width 25mm of taparia make cat no hbhc 1224 carbon steel all hard 24tpi , loop junction box clamp for fixing of street light etc , original

CTN :40936332

14 Jul, 2025 53.72 Lacs

Berhampur - Odisha

Tender For supplying all labour, material and t&p for laying of pipe lines, supplying & fiting of sluice valves, construction of valve chamber, providing fhtc in connection with pws to tumbagada, andanda & sapuakhata under patrapur block. - annexure - a, laying of pipe lines, fiting of sluice valves construction of valve chamber providing fhtc in connection with pws to tumbagada, supplying all labour and t&p for earth work in all kinds of soil within 50 m initial lead and 1.5 m initial lift including rough dressing and leveling etc., in foundation and plinth as per direction of engineer in-charge., supplying all material, labour , t&p for laying of following od hdpepipes conforming to is 4984-2016 and specials of the following outside diameter and class-4 to class-5 and jointing by fusion welding method including testing etc. all complete as per direction of engineer-in-charge, 160mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 110mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 90mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, supplying all labour, t&p for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of engineer-in-charge., supplying all labour, materials, and t&p for drilling perfectly horizontal bore of required dia so as to accommodate following size hdpe. pipe line into the hole including inserting the pipe with out disrupting the traffic or cutting road including jointing with water main pipe lines etc, (excluding cost of pvc pipe) and as per the direction of engineer-in-charge, 160 mm dia hdpe pipe, supplying all labour and t&p for cutting cement concrete road for taking pipe line etc., complete and as per direction of engineer-in-charge., supplying all materials, labour t&p for making good to the damages of cutting of cement concrete road for taking pipe line and with 40 mm size crusher broken metal concrete etc., cc (1:4:8) of thickness 0.10 mtr and top 12 mm size crusher broken chip;s concrete cc(1:2:4) of thickness 0.075 mtrs including all cost, conveyance, royality of materials including watering, curing and ramming etc., all complete and as per specification and direction of engineer-in-charge, supplying all materials, labour and t&p for fixing of following sizes of c.i. sluice / non return valves with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete., 150 mm dia c.i s.v, 150 mm dia c.i n.r.v, 100 mm dia c.i s.v, 80 mm dia c.i s.v, supplying all materials, labour and t&p for fixing of 15mm to 25 mm dia single air valve including fitting of required pvc service saddle for water works purpose for following diameter, including drilling the water main as per specification etc., complete., supplying all materials, labour, t&p for construction of brick masonry sluice valve and non return valve chambers of internal size 90x90x120cm with all lead royalty etc. such as earth work excavation, bed concrete with c.c. (1:4:8), kb brick in c.m. (1:6), 12mm cement plaster with c.m. (1:4), rcc cover slab with cc 1:2:4 etc., and as per approved p.h. drawing and design etc., complete and direction of engineer-in-charge., supplying all materials, labour and t&p for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (tata / zindal make) confirming to is 1239(p.1)2004/is:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of engineer-in-charge to be used to cross drainage work incl

Central Government/Public Sector

CTN :40945087

28 Jul, 2025 NA

Dhanbad - Jharkhand

Tender For improvement of cutting in kbj section (km.6/16 to 7/10) by rcc retaining wall, wire netting, earth cutting and other ancillary works under aden/cpu.

Stone Cutter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector